Craniofacial features and incisor position design of esthetics population after orthodontic treatment.

OBJECTIVES: This study aims to provide craniofacial features and incisor position prediction models among esthetics population after orthodontic treatment. METHODS: A total of 338 patients with esthetic profiles were selected from 1 055 post-orthodontic adults based on inclusion and exclusion criteria and scored by five dental students. Mean values of cephalometric measurement were demonstrated with gender and sagittal skeletal pattern (ANB) differences assessed by generalized estimating equation. Correlations among age, skeletal, and soft tissue variables in different genders were determined. Multivariate analysis was used to assess the influence of skeletal and soft tissue variables on orthodontic incisor position. RESULTS: Within the esthetic cohort after orthodontic treatment, gender differences existed in cranial and mandibular length, mandibular rotation, protrusion of pogonion, inclination of maxillary incisors, upper lip thickness, lower 1/3 face height, and nose protrusion. However, in class Ⅰ malocclusion, the development of the chin showed no significance, whereas the protrusion of the lower lip significantly differed between genders, with less protrusion in males. In males, the protrusion of lip and chin varied among groups, with thinner basic upper lip thickness of class Ⅱ than class Ⅰ and greater lower lip height of class Ⅲ than class Ⅰ. In females, the protrusion and height of the upper lip and chin varied in groups, with thicker basic upper lip thickness of class Ⅲ than class Ⅰ. Upper lip thickness, female basic upper lip thickness, and female lower lip height were correlated with age. The protrusion of the upper lip was mainly correlated with posterior cranial base, mandibular body length, ANB in male and SNA, ANB, sagittal maxillary length, mandibular rotation, and protrusion of pogonion in female. The protrusion of the lower lip in males was mainly correlated with ramus height, mandibular rotation, protrusion of pogonion in male and ANB, mandibular rotation, and protrusion of pogonion in females. After employing skeletal variables to fit dental parameters, optimal results were achieved in male IMPA (adjusted R2=0.712) and female G Vert-U1 (adjusted R2=0.795). After employing skeletal and soft tissue variables simultaneously, optimal results were achieved in male and female G Vert-U1, which was mainly influenced by the protrusion of the chin and nasal base in males (adjusted R2=0.836) and the protrusion of the nasal base as well as ANB in females (adjusted R2=0.842). CONCLUSIONS: This study demonstrated the craniofacial features of esthetics population after orthodontic treatment and revealed the correlation of gender, age, skeleton, and soft tissues to provide reliable prediction models for aesthetic orthodontic incisor position.

Reliability of Moyer's and Tanaka Johnston's prediction methods in a non-Caucasian heterogeneous population - a cross-sectional study.

INTRODUCTION: Mixed dentition analyses are used to determine possible tooth-size and arch-length discrepancies during the transition from primary to permanent dentition. Prediction methods using a probability table or linear regression equation use the sum of the mesiodistal widths of mandibular permanent incisors to predict the mesiodistal width of unerupted permanent teeth. Racial and sexual variations and sexual dimorphism in tooth size have been reported. The objective of this study is to validate Moyer's and Tanaka Johnston's mixed dentition analyses in a contemporary South Indian population.

Root canal configuration of human permanent anterior teeth: A cross-sectional study using cone-beam computed tomography in the Pakistani population.

Objectives: To analyse and document internal root morphological variations in permanent anterior teeth using conebeam computed tomography. METHODS: The cross-sectional, retrospective study was conducted from January 21 to June 19, 2021, at Jinnah Magnetic Resonance Imaging and Body Scan, and comprised data from July to December 2020 related to all the patients who had been referred to the centre for dental cone-beam computed tomography scan. The scans were evaluated at the Radiology Department of the School of Dentistry at Shaheed Zulfiqar Ali Bhutto Medical University, Islamabad, Pakistan. The morphology of the roots and root canals in all permanent anterior teeth was examined. Root canal configuration was categorised using Vertucci's classification. Data was analysed using SPSS 20. RESULTS: Of the 211 patients, 116(55%) were females and 95(45%) were males. The overall mean age was 39.9±1.02 years (range: 15-65 years). All the permanent anterior teeth exhibited a single root, with the exception 2(0.9%) mandibular right and 4(1.9%) left canines which had double roots. Type I root canals were observed in all 211 (100%) maxillary right central incisors, maxillary left central incisors and maxillary left canines. Among maxillary right canines, 208(98.6%) had type-I root canals, and the corresponding value for maxillary right lateral incisors was 209(99.1%), and for maxillary left lateral incisors, the value was 210(99.5%). Root canal polymorphism had no significant association with gender (p>0.05). CONCLUSIONS: The presence of type-I root canal was common in permanent anterior teeth, and there was significant association of root canal polymorphism with gender.

Fluctuating arch symmetry: a comparison of two methods of assessment - applicability and efficiency.

INTRODUCTION: Symmetry is balance, some correspondence in the size, form, and arrangements of parts on opposite sides of a plane, line, or point. The opposite of this concept is asymmetry, or imbalance. OBJECTIVE: This retrospective study compared two methods for assessing arch symmetry with linear measurements based on triangles, to determine their applicability and efficiency. METHODS: Two groups were enrolled: children (n=20) and adults (n=20), and the arch symmetry was assessed from linear measurements. Method 1: the incisor-canine (INC), canine-molar (CM), and incisor-molar (INM) distances (paired t-test and Pearson correlation). Method 2: a mathematical equation between the cusps measurements of the canines and the distobuccal of the first molars leading to result 1 (t-test for one sample and bootstrapping analysis). Dental casts were digitized and analyzed using a software program. The Bland-Altman test compared the methods (α=0.05). RESULTS: The Bland-Altman test revealed concordance between the methods; however, separately the results were different: In method 1, the mandibular arch did not demonstrate correlation (children, INC r=0.33; CM r=0.45; INM r=0.51; adults, CM r=0.46; INM r=0.35), however, the maxilla revealed a strong correlation in children and a strong/moderate correlation in adults. In method 2, both arches were symmetrical (p>0.05). CONCLUSION: Method 1 may be appropriate during orthodontic treatment, and method 2 may be indicated for final treatment. These methods are useful; however, only method 1 identified the side of asymmetry. The methods can contribute to future studies in syndromic and non-syndromic patients, before and after orthognathic surgeries and orthodontic treatment, comparing results.

Biomechanical characteristics of maxillary anterior incisor, conventional immediate implantation and socket shield technique - A finite element analysis and case report.

BACKGROUND: To prevent the absorption and collapse of the labial bone plate of the anterior teeth, immediate implantation and socket shield technique have been increasingly applied to anterior dental aesthetic implant restoration. OBJECTIVE: To provide a biomechanical basis for implant restoration of maxillary anterior teeth, finite element analysis was used to investigate the stress peak and distribution in different anatomical sites of natural teeth, conventional immediate implantation and socket shield technique. METHODS: Three maxillary finite element models were established, including a maxillary incisor as a natural tooth, a conventional immediate implantation and a socket shield technique. A mechanical load of 100 N was applied to simulate and analyze the biomechanical behavior of the root, periodontal ligament (PDL), implant and surrounding bone interface. RESULTS: The stress distribution of the natural tooth was relatively uniform under load. The maximum von Mises stress of the root, periodontal ligament, cortical bone and cancellous bone were 20.14 MPa, 2.473 MPa, 19.48 MPa and 5.068 MPa, respectively. When the conventional immediate implantation was loaded, the stress was mainly concentrated around the neck of implant. Maximum stress on the surface of the implant was 102 MPa, the cortical bone was 16.13 MPa, and the cancellous bone was 18.29 MPa. When the implantation with socket shield technique was loaded, the stress distribution of the implant was similar to that of immediate implantation. Maximum stress on the surface of the implant was 100.5 MPa, the cortical bone was 23.11 MPa, the cancellous bone was 21.66 MPa, the remaining tooth fragment was 29.42 MPa and the periodontal ligament of the tooth fragment was 1.131 MPa. CONCLUSIONS: 1. Under static loading, both socket shield technology and conventional immediate implantation can support the esthetic restoration of anterior teeth biomechanically. 2.Under short-term follow-up, both immediate implant and socket shield technology achieved satisfactory clinical results, including bone healing and patient satisfaction. 3.The stress distribution is mainly located on the buccal bone surface of the implant and is associated with resorption of the buccal bone plate after implant replacement in both socket shield technology and conventional immediate implantation. 4.The presence of retained root fragment had an impact on the bone graft gap. In immediate implantation, the peak stress was located in the cortical bone near the implant position, while in socket shield technology, the peak stress was at the neck of the cortical bone corresponding to the retained root fragment.

The dimensions of preformed nickel-titanium archwires measured at the bracket positions corresponding to the central incisor, canine, and first molar.

INTRODUCTION: Variation in the thickness of commercially available preformed rectangular archwires at the bracket positions has not been thoroughly studied. Therefore, this study measured the edgewise (height) and flatwise (width) dimensions of preformed rectangular nickel-titanium (NiTi) archwires at bracket positions corresponding to the central incisor, canine, and first molar and compared them among bracket positions. METHODS: Sixty types of preformed rectangular NiTi mandibular archwires indicated as 0.019 × 0.025-in were obtained from 14 manufacturers. The height and width dimensions of archwires were measured at 4 points (3 bracket positions corresponding to the central incisor, canine, and first molar, and 1 terminal end) of each side of each archwire using a micrometer and compared with the indicated dimensions using 1-sample t tests. Furthermore, the measured dimensions were compared among the 3 bracket positions using a 1-way analysis of variance and Bonferroni post-hoc test. RESULTS: The measured dimensions were significantly smaller than the indicated dimensions for all points except the central incisor point for height and significantly smaller than the indicated dimensions for all points for width. Comparisons among points showed that for height, the central incisor point was significantly larger than the first molar and terminal points. However, no significant differences were found for width at any point. CONCLUSIONS: The measured dimensions of preformed NiTi archwires at the bracket positions were generally smaller than the indicated dimensions, with variations observed not only among products but also among manufacturers.

Anatomical characteristics of different tooth groups. Effect on in-office bleaching treatment

AIM: The objective of the present study was to investigate the association between the anatomical characteristics of different tooth groups and the diffusion and bleaching effect of hydrogen peroxide (H2O2). MATERIALS AND METHODS: Computed tomography (CT) images from five patients were used to assess the hard tissue thickness and pulp volume (PV) of four tooth groups: lower (mandibular) incisors (LI), upper (maxillary) incisors (UI), canines (C), and premolars (PM). Additionally, 80 bovine tooth disks were divided into four groups (n = 20) to match the thickness of each tooth group studied. All the specimens were exposed to a 35% H2O2 bleaching gel, with 50 µL applied for 45 min during the first, second, and third sessions. Diffusion was evaluated using the peroxidase enzyme method. Color change analyses (∆E, ∆E00, and ∆WID) were performed after the three application sessions and 7 days after the bleaching treatment using a spectrophotometer. RESULTS: The PM group showed greater thickness and PV, followed by the C, UI, and LI groups (P 0.001). The LI group had six times greater H2O2 diffusion compared with the PM group (P 0.001), while the PM group exhibited a PV nine times larger than the LI group. Furthermore, the LI and UI groups achieved color saturation with one fewer session than the C and PM groups. CONCLUSIONS: Specific tooth groups have anatomical characteristics that interfere with bleaching treatment in terms of the diffusion and whitening effect of H2O2. Furthermore, the diffusion capacity of H2O2 was inversely proportional to the thickness of the tooth groups.

Marginal Gingival Thickness Assessment in Three- To Six-Year-Old Preschool Children.

Purpose: Although gingival thickness has been extensively studied in permanent dentition, the literature regarding marginal gingival thickness in primary dentition is insufficient. The purpose of this study was to assess the variations in marginal gingival thickness in preschool-age children. Methods: A cross-sectional study of 4,109 primary teeth was conducted. Using a reamer, the transgingival probing method was employed to assess marginal gingival thickness in healthy preschoolers. Inter-examiner and intra-examiner reproducibility were assessed via the intraclass correlation coefficient. Results: Descriptive statistics revealed that primary maxillary left second molars had the highest mean marginal gingival thickness (1.06 mm), whereas primary mandibular right central incisors had the lowest mean marginal gingival thickness (0.74 mm). Gender-based independent sample t-tests revealed significant differences in the values of primary maxillary right canines (females had greater values than males; P=0.03) and primary mandibular right first molars (males had greater values than females; P=0.01). An inter-arch comparison revealed significant differences between the primary second molars (maxillary more than mandibular; P=0.001). Conclusions: This study reports the first documented marginal gingival thicknesses of primary dentition. It reveals substantial variations in the values of primary maxillary right canines and primary mandibular right first molars and between primary maxillary and mandibular second molars.

Network analysis of three-dimensional hard-soft tissue relationships in the lower 1/3 of the face: skeletal Class I-normodivergent malocclusion versus Class II-hyperdivergent malocclusion.

BACKGROUND: The determining effect of facial hard tissues on soft tissue morphology in orthodontic patients has yet to be explained. The aim of this study was to clarify the hard-soft tissue relationships of the lower 1/3 of the face in skeletal Class II-hyperdivergent patients compared with those in Class I-normodivergent patients using network analysis. METHODS: Fifty-two adult patients (42 females, 10 males; age, 26.58 ± 5.80 years) were divided into two groups: Group 1, 25 subjects, skeletal Class I normodivergent pattern with straight profile; Group 2, 27 subjects, skeletal Class II hyperdivergent pattern with convex profile. Pretreatment cone-beam computed tomography and three-dimensional facial scans were taken and superimposed, on which landmarks were identified manually, and their coordinate values were used for network analysis. RESULTS: (1) In sagittal direction, Group 2 correlations were generally weaker than Group 1. In both the vertical and sagittal directions of Group 1, the most influential hard tissue landmarks to soft tissues were located between the level of cemento-enamel junction of upper teeth and root apex of lower teeth. In Group 2, the hard tissue landmarks with the greatest influence in vertical direction were distributed more forward and downward than in Group 1. (2) In Group 1, all the correlations for vertical-hard tissue to sagittal-soft tissue position and sagittal-hard tissue to vertical-soft tissue position were positive. However, Group 2 correlations between vertical-hard tissue and sagittal-soft tissue positions were mostly negative. Between sagittal-hard tissue and vertical-soft tissue positions, Group 2 correlations were negative for mandible, and were positive for maxilla and teeth. CONCLUSION: Compared with Class I normodivergent patients with straight profile, Class II hyperdivergent patients with convex profile had more variations in soft tissue morphology in sagittal direction. In vertical direction, the most relevant hard tissue landmarks on which soft tissue predictions should be based were distributed more forward and downward in Class II hyperdivergent patients with convex profile. Class II hyperdivergent pattern with convex profile was an imbalanced phenotype concerning sagittal and vertical positions of maxillofacial hard and soft tissues.

Credibility of Pont's index in Egyptian population.

BACKGROUND: Many indices have been suggested to help orthodontists in predicting the ideal dental arch width. One of these was Pont's index which was established by Pont. He suggested equations to predict the ideal maxillary dental arch width (interpremolar and intermolar) from the combined mesiodistal width of the maxillary incisors. This study aimed to test the applicability of Pont's index as an orthodontic diagnostic tool in Egyptian population and to compare the results with those obtained from studies of different ethnic subjects. METHODS: This study was performed using dental casts of 184 Egyptian individuals (82 males and 102 females; age range, 19-24 years). The casts were divided into 46 casts with normal occlusion, 46 casts with class I, 46 casts with class II and 46 casts with class III malocclusion, according to Angle's classification. Alginate impressions were taken for all patients and poured immediately using dental plaster. The real models were transformed into digital models using three-dimensional laser scanner to allow digital model analysis. Predicted arch widths were calculated using Pont's equations. The predicted values were compared to the measured values. RESULTS: Intra class correlation coefficient (ICC) (absolute agreement) between measured and predicted arch widths was determined. Poor absolute agreement was found between measured arch width values and the corresponding values calculated according to Pont's index. CONCLUSION: According to the results of this study, Pont's index is not a reliable method for predicting the ideal dental arch widths in Egyptian populations.

Evaluation of Mesiodistal Angulation of Maxillary Anterior Teeth in Incisal View Using Manual and Digital Methods: An In Vivo Study.

AIM: The aim of the present research was to assess the mesiodistal angulation of the maxillary anterior teeth utilizing Image J computer software, a Profile projector, and a Custom-made jig. MATERIALS AND METHODS: A total of 34 subjects (17 males and 17 females) were chosen from a group of 18-30 years old with bilateral Angle Class I molars and canine relationships. One manual approach (Custom-made jig) and two digital methods (J computer software, a Profile projector) were used to record the mesiodistal angulation in incisal view. The individuals had alginate impressions made, and a facebow was used to capture the maxilla's spatial relationship with the cranium. The articulated cast with the help of mounting ring moved to the specially customized jig, then the angulations was measured in the incisal view after the casts were placed in a semi-adjustable articulator. Data were recorded and statistically analyzed. RESULTS: The mesiodistal angulation in the incisal view via three methods between the 17 males and 17 females has statistically significant different. Although the mesiodistal angulation for maxillary lateral incisor and canine did not show any statistically significant difference, the maximum and minimum values obtained were always greater in males in comparison with the females. This indicates that the positions of six maxillary anterior teeth in the males resulted in the creation of upward sweep of incisal edges of central and lateral incisors which was also referred to as "smiling line" producing masculine surface anatomy more squared and vigorous while feminine surface anatomy being more rounded, soft, and pleasant. There was no statistically significant difference between the right and left sides, indicating bilateral arch symmetry and the symmetrical place of the right teeth compared with the left side's corresponding teeth. CONCLUSION: On conclusion, according to the current study's findings, all three approaches can measure the mesiodistal angulations of maxillary anterior teeth in incisal view with clinically acceptable accuracy. The digital methods, which included using the Image J computer software and the profile projector, achieved more accurate results than the manual method. CLINICAL SIGNIFICANCE: The outcomes of this study's mesiodistal angulations can be used as a reference for placing teeth in both fully and partially edentulous conditions. This study contributes to a better understanding of the importance of achieving the ideal occlusion in the Indian population by placing the maxillary anterior teeth at the proper mesiodistal angulation. How to cite this article: Shadaksharappa SH, Lahiri B, Kamath AG, et al. Evaluation of Mesiodistal Angulation of Maxillary Anterior Teeth in Incisal View Using Manual and Digital Methods: An In Vivo Study. J Contemp Dent Pract 2024;25(4):320-325.

The usefulness of ultrasonography as a dynamic measurement system for visualizing root canal working length: an in vivo study.

OBJECTIVE: Although apex locators are generally effective tools for determining root canal working length, they may produce inaccurate results in some cases. The present study aimed to evaluate the efficacy of ultrasonography as an alternative method for measuring root canal length. MATERIALS AND METHODS: Forty-seven anterior teeth with apical lesions were selected for the study. Initially, an electronic apex locator was used to measure the working length. Subsequently, ultrasonography was employed to visualize the root apex and determine the working length. During ultrasound imaging, a K-file No. 15 was inserted into the root canal until its tip was visible on the ultrasound monitor. Measurements obtained from both methods were compared using an independent sample t-test. Correlations were assessed with the Pearson correlation coefficient, and agreement was determined using the Bland‒Altman plot. RESULTS: The mean working canal length was 19.9 mm for the apex locator and 20.6 mm for the ultrasonography-guided method. No significant differences were observed between the data obtained using the apex locator method and the data obtained using the ultrasonography guidance method. Furthermore, a high level of agreement was identified between the two techniques. CONCLUSION: Ultrasonography can be used to visualize the apex effectively and determine canal length, especially when canal length determination is uncertain for various reasons.

Visualisation of dental anatomy in CBCT scans: Part 1.

To the trained eye, every tooth is different. An in-depth understanding of dental anatomy in cross-sectional images is a fundamental basic skill required when interpreting cone beam computed tomography (CBCT) scans. The conventional orthogonal planes of axial, coronal, and sagittal are not always the best planes in which to assess teeth because every tooth is at a slightly different angle to all these planes. In this chapter, the author demonstrates the characteristic anatomy of upper and lower incisors, canines, premolars, and molars in longitudinal and transverse sections, using carefully uprighted images. Some of these teeth are also shown in transverse section at various levels in the crown and root. The chronology of permanent teeth is shown. Developing teeth are discussed and incremental growth lines are mentioned.The author describes three well-known dental notation systems (Palmer, FDI, hybrid).There are four videos accompanying this chapter, including one fascinating video showing a scroll-through of all the cross-arch sections of a synthetic panoramic (curved multiplanar reconstruction) image that includes all the upper and lower teeth in a 16-year-old.

Radiographic evaluation of enamel thickness of permanent teeth: relevance and applicability.

OBJECTIVE: This descriptive observational study aimed to determine clinically relevant and applicable data of enamel thickness (ETH), considering the mesio-distal differences of anterior and posterior permanent teeth and their relationships. MATERIAL AND METHODS: The sample consisted of right-sided standardized radiographs of 34 individuals (21 females and 13 males), aged between 13 and 24 (average 16) years, with all permanent teeth intact and without crowding. Four periapical and four interproximal radiographs were obtained and digitized. ETH measurements (mesial to distal contact points at the dentin-enamel junction) were performed after correction for radiographic image magnification. The Students' t-test was applied to the differences between paired means, with the Pearson correlation to evaluate the correlation between them. RESULTS: The mesial and distal ETH increased from the anterior to the posterior teeth. Incisor ETH ranged between 0.60 and 0.84 mm. Canines, premolars, and molars were more than 1.0 mm thick, and molar enamel reached values between 1.26 and 1.44 mm. CONCLUSION: Distal ETH was significantly greater than the mesial ETH, and progressively thicker from the anterior to posterior teeth. Interproximal reduction (IPR) of the lower central and upper lateral incisors should be avoided, reduced, or performed on their distal surfaces. There is a positive and significant correlation between ETH and the mesial and distal surfaces of the teeth. Periapical radiographs and evaluation of the remaining ETH are necessary in cases of retreatment. The location and number of tooth size discrepancies should be considered in treatment planning and appropriately compensated with IPR.

Evaluation of the Golden Proportion, Golden Percentage, and Recurring Esthetic Dental Proportion in Kenyans of African Descent.

OBJECTIVES: To evaluate the validity of the Golden Proportion, Golden Percentage, and Recurring Esthetic Dental (RED) Proportion among Kenyans of African descent with naturally well-aligned teeth. MATERIALS AND METHODS: Standardized frontal photographic images of the smiles of 175 participants aged 18-35 years were obtained, and Adobe Photoshop was used to analyze and measure the frontal widths of the maxillary central and lateral incisors and canines in triplicate. The average teeth widths were calculated to determine the existence of the Golden Proportion, Golden Percentage, and RED Proportion, and their validity using independent sample t-tests to compare the differences in the mean teeth widths at α < 0.05. RESULTS: The number of male and female participants was 107 (61.1%) and 68 (38.9%), respectively. The Golden Proportion between the maxillary central and lateral incisors was found in 4.0% on the right and 2.8% on the left of all the participants, but between the maxillary lateral incisors and canines was found in only 0.6% on the right of male participants (p < 0.0001). The RED Proportion between the maxillary lateral and central incisors was in the range of 67%-70%, and between the canines and lateral incisors was 82%-84% (p < 0.0001). The proportion of RED was not constant, and gradually increased distally. The Golden Percentage of 15% was observed in the lateral incisors bilaterally; however, in the central incisors and the canines, the Golden Percentage was 22% and 12%, respectively. CONCLUSION: The Golden and RED Proportions were invalid determinants of anterior teeth proportions. The Golden Percentage existed only in the lateral incisors. The Golden Proportion, RED Proportion, and Golden Percentage theories may not be applicable to all populations when designing smiles. Racial and ethnic backgrounds are important considerations to establish objective quantifiable values of anterior tooth proportions that are beneficial for esthetic restorations.

Effect of 3D printing technology and print orientation on the trueness of additively manufactured definitive casts with different tooth preparations.

OBJECTIVES: To evaluate the fabrication trueness of additively manufactured maxillary definitive casts with various tooth preparations fabricated with different 3-dimensional (3D) printers and print orientations. METHODS: A maxillary typodont with tooth preparations for a posterior 3-unit fixed partial denture, lateral incisor crown, central incisor and canine veneers, first premolar and second molar inlays, and a first molar crown was digitized with an industrial scanner. This scan file was used to fabricate definitive casts with a digital light processing (DLP) or stereolithography (SLA) 3D printer in different orientations (0-degree, 30-degree, 45-degree, and 90-degree) (n = 7). All casts were digitized with the same scanner, and the deviations within each preparation site were evaluated. Generalized linear model analysis was used for statistical analysis (α = 0.05). RESULTS: The interaction between the 3D printer and the print orientation affected measured deviations within all preparations (P ≤ 0.001) except for the lateral incisor crown and canine veneer (P ≥ 0.094), which were affected only by the main factors (P < 0.001). DLP-90 mostly led to the highest and DLP-0 mostly resulted in the lowest deviations within posterior tooth preparations (P ≤ 0.014). DLP-30 led to the lowest deviations within the first premolar inlay and DLP-45 led to the lowest deviations within the central incisor veneer preparation (P ≤ 0.045). CONCLUSIONS: Posterior preparations of tested casts had the highest trueness with DLP-0 or DLP-30, while central incisor veneer preparations had the highest trueness with DLP-45. DLP-90 led to the lowest trueness for most of the tooth preparations. CLINICAL SIGNIFICANCE: Definitive casts with tooth preparations fabricated with the tested DLP 3D printer and the print orientation adjusted on tooth preparation may enable well-fitting restorations. However, 90-degree print orientation should be avoided with this 3D printer, as it led to the lowest fabrication trueness.

The relationship of anterior occlusion and skeletal variables with the frontal sinus index: An analytical cross-sectional study.

OBJECTIVE: To determine the relationship of anterior occlusion and skeletal variables with the frontal sinus index. METHODS: The retrospective, analytical, cross-sectional, study was conducted from July to November 2020 at Dr Ishratul- Ebad Khan Institute of Oral Health Sciences and Dow Dental College, Dow University of Health Sciences, Karachi, and comprised data from 2015 to 2018 related to pre-treatment lateral cephalograms for determining frontal sinus index and other cephalometric variables. The dental casts were observed for incisor classification. Patients with Class I incisors formed the comparison group, while the rest comprised 5 malocclusion groups. The frontal sinus was traced, and the sinus index was calculated. Data was analysed using STATA 15 and R 3.5.1. RESULTS: Of the 240 subjects, there were 40(16.66%) in each of the 6 groups; 155(64.6%) females and 85(35.4%) males. The mean age of the sample was 21.33±3.52 years (range: 16-29 years). The mean sinus index was higher in all malocclusion groups than the comparison group, but it was significantly higher only in Class II division 2 and anterior open bite groups (p<0.05). The only exception to the trend was Class II division 1 with and without contact in which the value was lower (p>0.05). The anterior cranial base length, sella-nasion mandibular plane angle, and upper incisor palatal plane angle significantly affected the frontal sinus index (p<0.05). CONCLUSIONS: The frontal sinus index could be considered an indicator of harmonious anterior occlusion.

Evaluating the long-term stability of a predefined palatal region for tooth movement analysis.

OBJECTIVES: We conducted a three-dimensional (3D) analysis of orthodontic tooth movement (TM) using digital dental models (DMs), focusing on the palatal region of interest (PROI), aiming to evaluate the long-term stability of the PROI, validate the 3D TM analysis with PROI registration, and compare it with conventional lateral cephalometric analyses. METHODS: Twenty adult patients treated with a multibracket appliance were evaluated at their first visit (T0) and at least 5 years later (T1) using DMs and lateral cephalograms (LCs). The long-term stability of PROI was assessed by calculating the point cloud distances between DM-T0 and DM-T1. TM analysis using DM with PROI registration for the maxillary central incisors was assessed through linear and angular measurements in the sagittal view and subsequently compared with the LCs. RESULTS: The average point cloud distance of the PROI between DM-T0 and DM-T1 was 0.21 mm (standard deviation, 0.13 mm). TM analysis using DMs demonstrated excellent reproducibility for both linear and angular measurements (intra-rater correlation coefficient, > 0.99). The 95 % limits of agreement between the DM and LC measurements were < 5.14° for angular change, 3.53 mm for horizontal displacement, and 0.98 mm for vertical displacement. No significant differences were observed in the angular and linear measurements when the TM was compared using the DMs and LCs. CONCLUSIONS: The PROI remained stable for over 5 years, supporting the reproducibility and accuracy of TM assessment using PROI registration in orthodontic clinical practice. CLINICAL SIGNIFICANCE: DM analysis lacks the risks associated with X-ray exposure and can be easily performed in daily clinical practice, indicating its potential for future clinical applications. These findings further support the use of DM with PROI registration for TM analysis in orthodontic clinical practice, emphasizing its long-term stability and reproducibility.

Dentoalveolar bone height in Class I adults with different vertical patterns: A cross-sectional study.

BACKGROUND: Facial divergence during growth and development affects both the anterior and posterior alveolar bone dimensions in the maxilla and mandible, and the dentoalveolar compensation mechanism in severe vertical skeletal discrepancies remains unclear. AIMS: To evaluate the: (1) difference in dentoalveolar heights among subjects with different vertical facial patterns; (2) association between the dentoalveolar bone height and other cephalometric variables; (3) effect of sex on dentoalveolar height measurements. MATERIAL AND METHODS: Non-growing subjects with skeletal Class I (0°

Analysis of morphology and symmetry of the root canal system of incisors, premolars and mandibular molars using CBCT.

Knowledge of root canal internal anatomy and its variations is important forproper endodontic treatment. It is therefore necessary to investigate morphological aspects among different dental groups in the same patient to define the best protocol for the case. AIM: To evaluate the morphology and symmetry of homologous incisors, premolars and mandibular molars using cone beam computed tomography (CBCT). MATERIALS AND METHOD: Descriptive statistical analysis was performed for the frequency of categorical variables, and a chi-square test or Fisher 's exact test was used to test whether gender and side were associated with number of roots, number of canals, and Vertucci's classification. Forty-five CBCT scans were evaluated, and 444 mandibular teeth were analyzed. The number of roots, number of canals, classification of the canals in each root according to Vertucci and presence of a symmetrical relationship between pairs of posterior teeth were analyzed. RESULTS: The resuls showed that 74% of mandibular central incisors had type I root canal, 26% of mandibular lateral incisors had type I and, with a significant difference in the number of canals between males and females (p < 0.05). In mandibular first premolars, 70.5% had type I; and in mandibular second premolars, 98.5% had type I. Mandibular first molars had two roots in 98% of the cases. Second mandibular molars had two roots in 92.5% of the cases, one root in 6%, and three roots in 1.5%. Symmetry between central incisors was higher in females than in males. CONCLUSIÓN: Teeth of the same group can have different morphologies in the same patient.

0 conhecimento da anatomia interna e suas variagoes anatómicas é fator importante para o adequado tratamento endodóntico. Portanto, é necessário investigar esses aspectos morfológicos entre diferentes grupos dentários de um mesmo paciente para definir o melhor protocolo para o caso. OBJETIVO: Avaliar a morfologia e simetria de incisivos, pré-molares e molares inferiores homólogos por meio de tomografia computadorizada de feixe cónico (TCFC). MATERIAIS E MÉTODO: Foi realizada análise estatística descri-tiva para a frequéncia das variáveis categóricas e foi utilizado o teste do qui-quadrado ou teste exato de Fisher para testar a relagao entre sexo e lado em comparagao com número de raízes, número de canais e classificagao de Vertucci. Quarenta e cinco TCFC foram avaliadas e 444 dentes inferiores foram analisados. Foram considerados: o número de raízes, o número de canais, o tipo dos canais acordo com a classificagao de Vertucci e a presenga de relagao simétrica entre pares de dentes posteriores. RESULTADOS: Os resultados mostraram que 74% dos incisivos centrais inferiores tinham um canal radicular tipo 1 e 26% tinham dois canais; 73% dos incisivos laterais inferiores, 26%oeram do tipo I, tinham um canal e 27% tinham dois canais, com diferenga significativa no número de canais entre os grupos masculino e feminino (p < 0,05). Nos primeiros pré-molares inferiores, tipo I, um canal foi detectado em 70,5% e dois canais em 29,5%; nos segundos pré-molares inferiores, tipo I, um único canal foi detectado em 98,5%. O primeiro molar inferior foi observado com duas raízes em 98% e tres raízes em 2%o. O segundo molar inferior tinha duas raízes em 92,5% dos casos, uma raiz em 6% e tres raízes em 1,5%. A simetria foi maior nas mulheres em comparagao aos homens nos incisivos centrais. CONCLUSÃO: Pode-se concluir que dentes de um mesmo grupo podem apresentar morfologias diferentes no mesmo paciente.