[2Fe-2S] Cluster Supported by Redox-Active o-Phenylenediamide Ligands and Its Application toward Dinitrogen Reduction.

As prevalent cofactors in living organisms, iron-sulfur clusters participate in not only the electron-transfer processes but also the biosynthesis of other cofactors. Many synthetic iron-sulfur clusters have been used in model studies, aiming to mimic their biological functions and to gain mechanistic insight into the related biological systems. The smallest [2Fe-2S] clusters are typically used for one-electron processes because of their limited capacity. Our group is interested in functionalizing small iron-sulfur clusters with redox-active ligands to enhance their electron storage capacity, because such functionalized clusters can potentially mediate multielectron chemical transformations. Herein we report the synthesis, structural characterization, and catalytic activity of a diferric [2Fe-2S] cluster functionalized with two o-phenylenediamide ligands. The electrochemical and chemical reductions of such a cluster revealed rich redox chemistry. The functionalized diferric cluster can store up to four electrons reversibly, where the first two reduction events are ligand-based and the remainder metal-based. The diferric [2Fe-2S] cluster displays catalytic activity toward silylation of dinitrogen, affording up to 88 equiv of the amine product per iron center.

Planar three-coordinate iron sulfide in a synthetic [4Fe-3S] cluster with biomimetic reactivity.

Iron-sulfur clusters are emerging as reactive sites for the reduction of small-molecule substrates. However, the four-coordinate iron sites of typical iron-sulfur clusters rarely react with substrates, implicating three-coordinate iron. This idea is untested because fully sulfide-coordinated three-coordinate iron is unprecedented. Here we report a new type of [4Fe-3S] cluster that features an iron centre with three bonds to sulfides, and characterize examples of the cluster in three oxidation levels using crystallography, spectroscopy, and ab initio calculations. Although a high-spin electronic configuration is characteristic of other iron-sulfur clusters, the three-coordinate iron centre in these clusters has a surprising low-spin electronic configuration due to the planar geometry and short Fe-S bonds. In a demonstration of biomimetic reactivity, the [4Fe-3S] cluster reduces hydrazine, a natural substrate of nitrogenase. The product is the first example of NH2 bound to an iron-sulfur cluster. Our results demonstrate that three-coordinate iron supported by sulfide donors is a plausible precursor to reactivity in iron-sulfur clusters like the FeMoco of nitrogenase.

A Synthetic Model of Enzymatic [Fe4S4]-Alkyl Intermediates.

Although alkyl complexes of [Fe4S4] clusters have been invoked as intermediates in a number of enzymatic reactions, obtaining a detailed understanding of their reactivity patterns and electronic structures has been difficult owing to their transient nature. To address this challenge, we herein report the synthesis and characterization of a 3:1 site-differentiated [Fe4S4]2+-alkyl cluster. Whereas [Fe4S4]2+ clusters typically exhibit pairwise delocalized electronic structures in which each Fe has a formal valence of 2.5+, Mössbauer spectroscopic and computational studies suggest that the highly electron-releasing alkyl group partially localizes the charge distribution within the cubane, an effect that has not been previously observed in tetrahedrally coordinated [Fe4S4] clusters.

UV-light-driven prebiotic synthesis of iron-sulfur clusters.

Iron-sulfur clusters are ancient cofactors that play a fundamental role in metabolism and may have impacted the prebiotic chemistry that led to life. However, it is unclear whether iron-sulfur clusters could have been synthesized on prebiotic Earth. Dissolved iron on early Earth was predominantly in the reduced ferrous state, but ferrous ions alone cannot form polynuclear iron-sulfur clusters. Similarly, free sulfide may not have been readily available. Here we show that UV light drives the synthesis of [2Fe-2S] and [4Fe-4S] clusters through the photooxidation of ferrous ions and the photolysis of organic thiols. Iron-sulfur clusters coordinate to and are stabilized by a wide range of cysteine-containing peptides and the assembly of iron-sulfur cluster-peptide complexes can take place within model protocells in a process that parallels extant pathways. Our experiments suggest that iron-sulfur clusters may have formed easily on early Earth, facilitating the emergence of an iron-sulfur-cluster-dependent metabolism.

Oxidized and reduced [2Fe-2S] clusters from an iron(I) synthon.

Synthetic [2Fe-2S] clusters are often used to elucidate ligand effects on the reduction potentials and spectroscopy of natural electron-transfer sites, which can have anionic Cys ligands or neutral His ligands. Current synthetic routes to [2Fe-2S] clusters are limited in their feasibility with a range of supporting ligands. Here, we report a new synthetic route to synthetic [2Fe-2S] clusters, through oxidation of an iron(I) source with elemental sulfur. This method yields a neutral diketiminate-supported [2Fe-2S] cluster in the diiron(III)-oxidized form. The oxidized [2Fe-2S] cluster can be reduced to a mixed valent iron(II)-iron(III) compound. Both the diferric and reduced mixed valent clusters are characterized using X-ray crystallography, Mössbauer spectroscopy, EPR spectroscopy and cyclic voltammetry. The reduced compound is particularly interesting because its X-ray crystal structure shows a difference in Fe-S bond lengths to one of the iron atoms, consistent with valence localization. The valence localization is also evident from Mössbauer spectroscopy.

De novo design of an artificial bis[4Fe-4S] binding protein.

In nature, protein subunits containing multiple iron-sulfur clusters often mediate the delivery of reducing equivalents from metabolic pathways to the active site of redox proteins. The de novo design of redox active proteins should include the engineering of a conduit for the delivery of electrons to and from the active site, in which multiple redox active centers are arranged in a controlled manner. Here, we describe a designed three-helix protein, DSD-bis[4Fe-4S], that coordinates two iron-sulfur clusters within its hydrophobic core. The design exploits the pseudo two-fold symmetry of the protein scaffold, DSD, which is a homodimeric three-helix bundle. Starting from the sequence of the parent peptide, we mutated eight leucine residues per dimer in the hydrophobic core to cysteine to provide the first coordination sphere for cubane-type iron-sulfur clusters. Incorporation of two clusters per dimer is readily achieved by in situ reconstitution and imparts increased stability to thermal denaturation compared to that of the apo form of the peptide as assessed by circular dichroism-monitored thermal denaturation. The presence of [4Fe-4S] clusters in intact proteins is confirmed by UV-vis spectroscopy, gel filtration, analytical ultracentrifugation, and electron paramagnetic resonance spectroscopy. Pulsed electron-electron double-resonance experiments have detected a magnetic dipole interaction between the two clusters ~0.7 MHz, which is consistent with the expected intercluster distance of 29-34 Å. Taken together, our data demonstrate the successful design of an artificial multi-iron-sulfur cluster protein with evidence of cluster-cluster interaction. The design principles implemented here can be extended to the design of multicluster molecular wires.

[3:1] site-differentiated [4Fe-4S] clusters having one carboxylate and three thiolates.

[4Fe-4S] clusters modeled after those in organisms having three cysteine thiolates and one carboxylate were synthesized by using the tridentate thiolato chelate. X-ray structural analysis reveals that the carboxylates coordinate to the unique irons in an η(1) manner rather than η(2). Redox potentials show a positive shift from that of the cluster having ethanethiolate and the tridentate thiolato chelate. These properties conform to the arrangement of the [4Fe-4S] clusters in the electron transfer systems included in Rc dark operative protochlorophyllide oxidoreductase (DPOR) and formaldehyde oxidoreductase (FOR) with Pf ferredoxin.

Reversible dimerization of mononuclear models of [Fe]-hydrogenase.

Enzyme models on the catwalk! A series of new model complexes of the active site of [Fe]-hydrogenase have been synthesized and characterized. These complexes are monomeric in solution, but dimeric in the solid state.

Tridentate thiolate ligands: application to the synthesis of the site-differentiated [4Fe-4S] cluster having a hydrosulfide ligand at the unique iron center.

We have designed new trithiols Temp(SH)(3) and Tefp(SH)(3) that can be synthesized conveniently in short steps and are useful for preparation of crystalline [3:1] site-differentiated [4Fe-4S] clusters suitable for X-ray structural analysis. The ethanethiolate clusters (PPh(4))(2)[Fe(4)S(4)(SEt)(TempS(3))] (4a) and (PPh(4))(2)[Fe(4)S(4)(SEt)(TefpS(3))] (4b) were prepared as precursors, and the unique iron sites were then selectively substituted. Upon reaction with H(2)S, (PPh(4))(2)[Fe(4)S(4)(SH)(TempS(3))] (6a) and (PPh(4))(2)[Fe(4)S(4)(SH)(TefpS(3))] (6b), which model the [4Fe-4S] cluster in the ß subunit of (R)-2-hydroxyisocaproyl-CoA dehydratase, were synthesized. Clusters 6a and 6b were further converted to the sulfido-bridged double cubanes (PPh(4))(4)[{Fe(4)S(4)(TempS(3))}(2)(µ(2)-S)] (7a) and (PPh(4))(4)[{Fe(4)S(4)(TefpS(3))}(2)(µ(2)-S)] (7b), respectively, via intermolecular condensation with the release of H(2)S. Conversely, addition of H(2)S to 7a,b afforded the hydrosulfide clusters 6a,b. The molecular structures of the clusters reported herein were elucidated by X-ray crystallographic analysis. Their redox properties were investigated by cyclic voltammetry.

Stabilities of cubane type [Fe4S4(SR)4](2-) clusters in partially aqueous media.

The stability of cubane-type [Fe4S4(SR)4](2-) clusters in mixed organic/aqueous solvents was examined as an initial step in the development of stable water-soluble cluster compounds possibly suitable for reconstitution of scaffold proteins in protein biosynthesis. The research involves primarily spectrophotometric assessment of stability in 20-80% Me2SO/aqueous media (v/v), from which it was found that conventional clusters tend to be stable for up to 12h in 60% Me2SO but are much less stable at higher aqueous content. α-Cyclodextrin mono- and dithioesters and thiols were prepared as ligand precursors for cluster binding, which was demonstrated by spectroscopic methods. A potentially bidentate cyclodextrin dithiolate was found to be relatively effective for cluster stabilization in 40% Me2SO, suggesting (together with earlier results) that other exceptionally large thiolate ligands may promote cluster stability in aqueous media.

Non-innocent bma ligand in a dissymetrically disubstituted diiron dithiolate related to the active site of the [FeFe] hydrogenases.

The purpose of the present study was to evaluate the use of a non-innocent ligand as a surrogate of the anchored [4Fe4S] cubane in a synthetic mimic of the [FeFe] hydrogenase active site. Reaction of 2,3-bis(diphenylphosphino) maleic anhydride (bma) with [Fe(2)(CO)(6)(mu-pdt)] (propanedithiolate, pdt=S(CH(2))(3)S) in the presence of Me(3)NO-2H(2)O afforded the monosubstituted derivative [Fe(2)(CO)(5)(Me(2)NCH(2)PPh(2))(mu-pdt)] (1). This results from the decomposition of the bma ligand and the apparent C-H bond cleavage in the released trimethylamine. Reaction under photolytic conditions afforded [Fe(2)(CO)(4)(bma)(mu-pdt)] (2). Compounds 1 and 2 were characterized by IR, NMR and X-ray diffraction. Voltammetric study indicated that the primary reduction of 2 is centered on the bma ligand.

Synthesis of MFe3S4 clusters containing a planar M(II) site (M = Ni, Pd, Pt), a structural element in the C-cluster of carbon monoxide dehydrogenase.

Synthesis of an analogue of the C-cluster of C. hydrogenoformans carbon monoxide dehydrogenase requires formation of a planar Ni(II) site and attachment of an exo iron atom in the core unit NiFe(4)S(5). The first objective has been achieved by two reactions: (i) displacement of Ph(3)P or Bu(t)()NC at tetrahedral Ni(II) sites of cubane-type [NiFe(3)S(4)](+) clusters with chelating diphosphines, and (ii) metal atom incorporation into a cuboidal [Fe(3)S(4)](0) cluster with a M(0) reactant in the presence of bis(1,2-dimethylphosphino)ethane (dmpe). The isolated product clusters [(dmpe)MFe(3)S(4)(LS(3))](2-) (M = Ni(II) (9), Pd(II) (12), Pt(II) (13); LS(3) = 1,3,5-tris((4,6-dimethyl-3-mercaptophenyl)thio)-2,4,6-tris(p-tolylthio)benzene(3-)) contain the cores [MFe(3)(mu(2)-S)(mu(3)-S)(3)](+) having planar M(II)P(2)S(2) sites and variable nonbonding M...S distances of 2.6-3.4 A. Reaction (i) involves a tetrahedral --> planar Ni(II) structural change between isomeric cubane and cubanoid [NiFe(3)S(4)](+) cores. Based on the magnetic properties of 12 and earlier considerations, the S = (5)/(2) ground state of the cubanoid cluster arises from the [Fe(3)S(4)](-) fragment, whereas the S = (3)/(2) ground state of the cubane cluster is a consequence of antiferromagnetic coupling between the spins of Ni(2+) (S = 1) and [Fe(3)S(4)](-). Other substitution reactions of [NiFe(3)S(4)](+) clusters and 1:3 site-differentiated [Fe(4)S(4)](2+) clusters are described, as are the structures of 12, 13, [(Me(3)P)NiFe(3)S(4)(LS(3))](2-), and [Fe(4)S(4)(LS(3))L'](2-) (L' = Me(2)NC(2)H(4)S(-), Ph(2)P(O)C(2)H(4)S(-)). This work significantly expands our initial report of cluster 9 (Panda et al. J. Am. Chem. Soc. 2004, 126, 6448-6459) and further demonstrates that a planar M(II) site can be stabilized within a cubanoid [NiFe(3)S(4)](+) core.

N-H...S hydrogen bonds in a ferredoxin model.

The Fe4S4 complex {(CH3)3NCH2CONH2}2[Fe4S4((tBuS)4] (1) was synthesized to replicate the ferredoxin active site with a subset of its N-H...S hydrogen bonds. The two cationic counterions mimic the polypeptide backbone of ferredoxin (Fd) as amide hydrogen-bond donors to sulfur atoms of the iron-sulfur cluster. X-ray crystallographic data show that the organic sulfur (Sgamma) of one tert-butylthiolate ligand and one inorganic sulfur of the cluster core serve as N-H...S hydrogen-bond acceptors. The cluster core of complex 1 is tetragonally elongated in contrast to that of Fd, which is tetragonally compressed. This is the first observation of an elongated [Fe4S4]2+ cluster core. Additionally, this is the first synthetic Fd model in which N-H...S hydrogen bonding to a cluster has been achieved.

On [Fe4S4]2+ -(mu2-SR)-M II bridge formation in the synthesis of an A-cluster analogue of carbon monoxide dehydrogenase/acetylcoenzyme A synthase.

The construction of a synthetic analogue of the A-cluster of carbon monoxide dehydrogenase/acetylcoenzyme synthase, the site of acetylcoenzyme A formation, requires as a final step the formation of an unsupported [Fe(4)S(4)]-(mu(2)-SR)-Ni(II) bridge to a preformed cluster. Our previous results (Rao, P. V.; Bhaduri, S.; Jiang, J.; Holm, R. H. Inorg. Chem. 2004, 43, 5833) and the work of others have addressed synthesis of dinuclear complexes relevant to the A-cluster. This investigation concentrates on reactions pertinent to bridge formation by examining systems containing dinuclear and mononuclear Ni(II) complexes and the 3:1 site-differentiated clusters [Fe(4)S(4)(LS(3))L'](2-) (L' = TfO(-) (14), SEt (15)). The system 14/[{Ni(L(O)-S(2)N(2))}M(SCH(2)CH(2)PPh(2))](+) results in cleavage of the dinuclear complex and formation of [{Ni(L(O)-S(2)N(2))}Fe(4)S(4)(LS(3))]- (18), in which the Ni(II) complex binds at the unique cluster site with formation of a Ni(mu(2)-SR)(2)Fe bridge rhomb. Cluster 18 and the related species [{Ni(phma)}Fe(4)S(4)(LS(3))](3)- (19) are obtainable by direct reaction of the corresponding cis-planar Ni(II)-S(2)N(2) complexes with 14. The mononuclear complexes [M(pdmt)(SEt)]- (M = Ni(II), Pd(II)) with 14 in acetonitrile or Me(2)SO solution react by thiolate transfer to give 15 and [M(2)(pdmt)(2)]. However, in dichloromethane the Ni(II) reaction product is interpreted as [{Ni(pdmt)(mu(2)-SEt)}Fe(4)S(4)(LS(3))](2-) (20). Reaction of Et(3)NH(+) and 15 affords the double cubane [{Fe(4)S(4)(LS(3))}(2)(mu(2)-SEt)](3-) (21). Cluster 18 contains two mutually supportive Fe-(mu(2)-SR)-Ni(II) bridges, 19 exhibits one strong and one weaker bridge, 20 has one unsupported bridge (inferred from the (1)H NMR spectrum), and 21 has one unsupported Fe-(mu(2)-SR)-Fe bridge. Bridges in 18, 19, and 21 were established by X-ray structures. This work demonstrates that a bridge of the type found in the enzyme A-clusters is achievable by synthesis and implies that more stable, unsupported single thiolate bridges may require reinforcement by an additional covalent linkage between the Fe(4)S(4) and nickel-containing components. (LS(3) = 1,3,5-tris((4,6-dimethyl-3-mercaptophenyl)thio)-2,4,6-tris(p-tolylthio)benzene(3-); L(O)-S(2)N(2) = N,N'-diethyl-3,7-diazanonane-1,9-dithiolate(2-); pdmt = pyridine-2,6-methanedithiolate(2-); phma = N,N'-1,2-phenylenebis(2-acetylthio)acetamidate(4-); TfO = triflate.).

Synthesis of the H-cluster framework of iron-only hydrogenase.

The metal-sulphur active sites of hydrogenases catalyse hydrogen evolution or uptake at rapid rates. Understanding the structure and function of these active sites--through mechanistic studies of hydrogenases, synthetic assemblies and in silico models--will help guide the design of new materials for hydrogen production or uptake. Here we report the assembly of the iron-sulphur framework of the active site of iron-only hydrogenase (the H-cluster), and show that it functions as an electrocatalyst for proton reduction. Through linking of a di-iron subsite to a {4Fe4S} cluster, we achieve the first synthesis of a metallosulphur cluster core involved in small-molecule catalysis. In addition to advancing our understanding of the natural biological system, the availability of an active, free-standing analogue of the H-cluster may enable us to develop useful electrocatalytic materials for application in, for example, reversible hydrogen fuel cells. (Platinum is currently the preferred electrocatalyst for such applications, but is expensive, limited in availability and, in the long term, unsustainable.).