Effect of sodium bicarbonate Ringer's solution on lung injury in rats with traumatic hemorrhagic shock.

This study aimed to explore the impact of different pH values of resuscitation fluid on traumatic hemorrhagic shock (THS), focusing on their effects on glycocalyx and inflammation. A rat model of THS was induced by hemorrhage from a left femur fracture, while an oxygen-glucose deprivation/reoxygenation (OGD/R)-induced HULEC-5a cell model was considered as an in vitro THS model. The lung tissue pathology and glycocalyx structure were assessed through hematoxylin-eosin (H&E) staining and transmission electron microscope examination. The levels of glycocalyx-related factors and inflammation-related factors were determined by enzyme-linked immunosorbent assay (ELISA). The expression of glycocalyx-related proteins, cell junction-related proteins, and proteins involved in the PI3K/Akt/NF-κB signaling pathway was analyzed by western blot. The results showed that both sodium bicarbonate Ringer's solution (BRS) and lactate Ringer's solution (LRS) were effective in restoring mean arterial pressure and heart rate in THS rats. However, LRS has a stronger impact on promoting inflammation and damaging the glycocalyx compared with BRS. In OGD/R-induced HULEC-5a cells, a pH of 7.4 and 6.5 increased inflammation and disrupted the glycocalyx, while a pH of 8.1 had no significant effect on inflammation or glycocalyx. Furthermore, the PI3K/Akt/NF-κB signaling pathway was activated by fluid resuscitation and different pH values. However, the activating effect of BRS and pH 8.1 on the PI3K/Akt/NF-κB signaling pathway was milder compared with LRS and pH6.5. In conclusion, an alkaline recovery environment was more beneficial for the treatment of THS.

Effect of Sodium Bicarbonate Ringer's Solution on Intraoperative Blood Gas Analysis and Postoperative Recovery Time in Liver Transplantation: A Single-Center Retrospective Study.

BACKGROUND Sodium bicarbonate Ringer's solution (BRS) is the latest generation of balanced crystal solutions. BRS does not increase the liver burden, but its impact in liver transplantation is unclear. The aim of this study was to investigate the effect of BRS as a fluid therapy on intraoperative blood gas analysis and postoperative recovery time in orthotopic liver transplantation (LT) patients. MATERIAL AND METHODS The study included 101 patients who received classical in situ liver transplantation at the Second Affiliated Hospital of Guangxi Medical University from November 2019 to January 2022. The patients were divided into 2 groups according to the intraoperative fluid infusion: the BRS group and the sodium lactate Ringer's solution group (LRS group). Intraoperative blood gas analysis, including pH, base excess (BE), bicarbonate, and lactic acid levels of radial artery blood, were collected after induction (T0), 30 min before opening (T1), 30 min after no liver period (T2), 30 min after opening (T3), and at the end of the operation (T4). Postoperative ICU catheter time, ICU stay time, and total hospitalization days were also recorded and compared between the 2 groups. RESULTS Lactic acid levels were decreased significantly at T3 in the BRS group (P<0.05). ICU catheter time, ICU hospitalization days, and total hospitalization days were significantly shorter in the BRS group (P<0.05). CONCLUSIONS BRS can decrease the lactic acid level at 30 min after opening, reducing the postoperative recovery time. BRS is more effective than LRS in liver transplantation.

Stability of benzylpenicillin for continuous intravenous infusions: An isotonic formulation for therapeutic use and a low-dose formulation for clinical trial.

INTRODUCTION: The objectives of this study were to develop a stability-indicating high performance liquid chromatography (HPLC) assay for benzylpenicillin (BPC) in pharmaceutical fluids, and to investigate the stability of (i) isotonic citrate-buffered BPC solutions at the clinically relevant concentration of 30 mg/mL, and (ii) low concentration citrate-buffered BPC intravenous infusions (5-30 µg/mL). METHODS: The stability of isotonic BPC solutions containing 3.4 or 7.2 mg/mL sodium citrate was compared against contemporary hypertonic solutions. The HPLC assay was shown to be stability-indicating following acidic, alkali, oxidative and elevated temperature stress testing. RESULTS: After 7 d storage at 4 °C and 24 h at 35 °C, the concentrations of isotonic BPC 30 mg/mL solutions containing 3.4 and 7.2 mg/mL sodium citrate were 96% and 95% respectively, compared to day 0. After 3 d at 4 °C and 24 h at room temperature (22 °C), the concentrations of isotonic BPC solutions with 3.4 and 7.2 mg/mL sodium citrate were 99% and 96% respectively, compared to day 0. These data were comparable to the hypertonic solutions and meet pharmacopeial stability requirements. Low concentration BPC infusions showed 0.5% and 2.5% degradation after 24 h storage at 22 °C and 35 °C, respectively. CONCLUSIONS: The isotonic BPC 30 mg/mL formulation is simple to prepare and may offer clinical benefits in settings where hypertonic solutions are problematic. This study provides assurance that high- and low-dose isotonic BPC infusions are stable at room temperature and our findings may be applicable to in vitro studies of BPC.

The use of a two-step removal protocol and optimized culture conditions improve development and quality of zona free mouse embryos.

The zona pellucida (ZP) plays an important role in both the fertilization and embryonic development. For the successful handling of early stage blastomeres for differentiation analysis, the production of identical twins or quadruplets, nuclear transfer or gene introduction requires the removal of the ZP (ZPR). Although single use of either acidic Tyrode's solution or pronase are commonly used for ZPR, long-term exposure to these agents can result in the inhibition of development with the collapse of the three-dimensional blastomere structure. Here, we demonstrate the benefits of using a two-step combined ZPR method, which relies upon a customized well-of-well (cWOW) system with smaller well size, on developmental competence and the quality of the zona free (ZF) mouse embryos. We first isolated 2-cell embryos using acid Tyrode's solution and then cultured these embryos using either commercially available or cWOW, which had a smaller microwell size. The rate of blastocyst was significantly increased by use of cWOW when compared to other culture systems. Then we evaluated the use of a two-step ZPR protocol, relying on acid Tyrode's solution and proteinase K, and subsequent culture in the cWOW system. Although acid Tyrode's solution treatment alone reduced ZPR time, blastomere morphology became wrinkled, significant decrease in blastocyst rate associated with increased number of apoptotic cells and increased expression of apoptosis-related genes were observed. Using proteinase K alone increased ZPR time and significantly decreased the blastocyst rate, but did not induce an increase in apoptotic cell number or apoptosis-related gene expression. In contrast, two-step method significantly reduced ZPR time and improved blastocyst rate by increasing the total number of cells in these wells an reducing the number of apoptotic cells in these experiments. These results suggest that the two-step ZPR protocol is beneficial for reducing the toxic effects of zona removal on ZF embryo development and quality when combined with a suitable culture system.

Lactate versus acetate buffered intravenous crystalloid solutions: a scoping review.

BACKGROUND: Buffered crystalloid solutions are increasingly recommended as first-line intravenous resuscitation fluids. However, guidelines do not distinguish between the different types of buffered solutions. The aim of this scoping review was to assess the evidence on the use of lactate- vs acetate-buffered crystalloid solutions and their potential benefits and harms. METHODS: We conducted this scoping review in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses Extension for Scoping Reviews. We searched PubMed, Embase, Epistemonikos, and the Cochrane Library for studies assessing the effect of lactate- vs acetate-buffered crystalloid solutions on any outcome in adult hospitalised patients. The quality of evidence was assessed using the Grading of Recommendations Assessment, Development and Evaluation approach. RESULTS: We included a total of 29 studies, 25 of which were clinical trials and four were observational studies. Most studies were conducted in surgical settings and indications for use were poorly described. The most commonly administered solutions were Ringer's lactate vs Ringer's acetate or Plasma-Lyte™. Outcomes included acid/base and electrolyte status; haemodynamic variables; and markers of renal and liver function, metabolism, and coagulation. Only a few studies reported patient-centred outcomes. Overall, the data provided no firm evidence for benefit or harm of either solution, and the quantity and quality of evidence were low. CONCLUSIONS: The quantity and quality of evidence on the use of different buffered crystalloid intravenous solutions were low, data were derived primarily from surgical settings, and patient-important outcomes were rarely reported; thus, the balance between benefits and harms between these solutions is largely unknown.

Comparison of hydrophilic ophthalmic media on silicone oil emulsification.

The aim of this study was to investigate whether and how the biological media which are in contact with silicone oil play a role in the silicone emulsification process. Commercially available Oxane 1300 silicone oil and potential hydrophilic phases of the emulsions in the eye (porcine aqueous humor, porcine vitreous and balanced salt solution) were investigated separately and in a mixture or emulsions by means of surface tension, rheological, zeta potential measurements and microscopic investigation. The surface tension of biological media (vitreous and aqueous humor) was significantly lower than that of non-biological media, especially in the case of aqueous humor, which indicates a remarkable emulsification tendency with these phases. The biological media are able to form both oil-in-water and water-in-oil emulsions, which can be observed in the clinical practice as well. It was established that the vitreous has a more expressed emulsification ability compared with the aqueous humor because smaller and more stable droplets can form with silicon oil when the vitreous is still there. It can be concluded that the vitreous has a higher impact on emulsification than the aqueous medium, which can predict that the vitreous remaining after vitrectomy has a key role in emulsion formation in the eye with silicone oil endotamponade.

Genomic profiling proves metastasis of cutaneous melanoma to vitreal fluid.

Cutaneous melanoma metastases can contribute to visual disturbances through a variety of factors, including metastasis to the vitreal fluid. The optimum management of metastatic cutaneous melanoma to the vitreal fluid is unknown, but can include radiation therapy or systemic therapy including immunotherapy. A high degree of suspicion is necessary to consider this complication while working with patients with cutaneous melanoma.

Effect of grain morphology on the degradation behavior of Mg-4 wt% Zn alloy in Hank's solution.

The degradation behavior of Mg-4 wt% Zn alloy with three different microstructures was examined in Hank's solution at 37 °C by electrochemical measurements and immersion tests in this study. The results show that the sample with cellular structure exhibits a more positive corrosion potential, lower corrosion current density, larger impedance and more protective film than samples with columnar dendritic and equiaxed dendritic structure. The higher corrosion resistance is attributed to the preferred orientation, eliminating susceptible grain boundaries and reduced secondary phases.

Population-based volume kinetics of crystalloids and colloids in healthy volunteers.

We characterized the volume kinetics of crystalloid solutions (Ringer's lactate solution and 5% dextrose water) and colloid solutions (6% tetrastarch and 10% pentastarch) by nonlinear mixed-effects modeling in healthy volunteers. We also assessed whether the bioelectrical impedance analysis parameters are significant covariates for volume kinetic parameters. Twelve male volunteers were randomly allocated to four groups, and each group received the four fluid solutions in specified sequences, separated by 1-week intervals to avoid any carryover effects. Volunteers received 40 ml/kg Ringer's lactate solution, 20 ml/kg 5% dextrose water, 1000 ml 6% tetrastarch, and 1000 ml 10% pentastarch over 1 h. Arterial blood samples were collected to measure the hemoglobin concentration at different time points. Bioelectrical impedance spectroscopy (BIS, INBODY S10, InBody CO., LTD, Seoul, Korea) was also carried out at preset time points. In total, 671 hemoglobin-derived plasma dilution data points were used to determine the volume kinetic characteristics of each fluid. The changes in plasma dilution induced by administration of crystalloid and colloid solutions were well-described by the two-volume and one-volume models, respectively. Extracellular water was a significant covariate for the peripheral volume of distribution at baseline in the volume kinetic model of Ringer's lactate solution. When the same amount was administered, the colloid solutions had ~4 times more plasma expansion effect than did the crystalloid solutions. Starches with larger molecular weights maintained the volume expansion effect longer than those with smaller molecular weights.

Acute effect of a peritoneal dialysis exchange on electrolyte concentration and QT interval in uraemic patients.

BACKGROUND: Hemodialysis (HD) sessions induce changes in plasma electrolytes that lead to modifications of QT interval, virtually associated with dangerous arrhythmias. It is not known whether such a phenomenon occurs even during peritoneal dialysis (PD). The aim of the study is to analyze the relationship between dialysate and plasma electrolyte modifications and QT interval during a PD exchange. METHODS: In 15 patients, two manual PD 4-h exchanges were performed, using two isotonic solutions with different calcium concentration (Ca++1.25 and Ca1.75++ mmol/L). Dialysate and plasma electrolyte concentration and QT interval (ECG Holter recording) were monitored hourly. A computational model simulating the ventricular action potential during the exchange was also performed. RESULTS: Dialysis exchange induced a significant plasma alkalizing effect (p < 0.001). Plasma K+ significantly decreased at the third hour (p < 0.05). Plasma Na+ significantly decreased (p < 0.001), while plasma Ca++ slightly increased only when using the Ca 1.75++ mmol/L solution (p < 0.01). The PD exchange did not induce modifications of clinical relevance in the QT interval, while a significant decrease in heart rate (p < 0.001) was observed. The changes in plasma K+ values were significantly inversely correlated to QT interval modifications (p < 0.001), indicating that even small decreases of K+ were consistently paralleled by small QT prolongations. These results were perfectly confirmed by the computational model. CONCLUSIONS: The PD exchange guarantees a greater cardiac electrical stability compared to the HD session and should be preferred in patients with a higher arrhythmic risk. Moreover, our study shows that ventricular repolarization is extremely sensitive to plasma K+ changes, also in normal range.

A manufacturing and annealing protocol to develop a cold-sprayed Fe-316L stainless steel biodegradable stenting material.

Biodegradable stents show promise to revolutionize coronary artery disease treatment. Its successful implementation in the global market remains limited due to the constraints of current generation biodegradable materials. Cold gas dynamic spraying (CGDS) has been proposed as a manufacturing approach to fabricate a metallic biodegradable amalgamate for stent application. Iron and 316L stainless steel powders are combined in a 4:1 ratio to create a novel biomaterial through cold spray. Cold spray processing however, produces a coating in a work hardened state, with limited ductility, which is a critical mechanical property in stent design. To this end, the influence of annealing temperature on the mechanical and corrosion performances of the proposed Fe-316L amalgamate is investigated. It was found that annealing at 1300 °C yielded a complex material microstructure, with an ultimate tensile strength of approximately 280 MPa and ductility of 23%. The static corrosion rate determined at this annealing temperature was equal to 0.22 mg cm-2 day-1, with multiple corrosion species identified within the degradation layers. Precipitates were observed throughout the microstructure, which appeared to accelerate the overall corrosion behaviour. It was shown that cold-sprayed Fe-316L has significant potential to be implemented in a clinical setting. STATEMENT OF SIGNIFICANCE: Biodegradable stents have potential to significantly improve treatment of coronary artery disease by decreasing or potentially eliminating late-term complications, including stent fracture and in-stent restenosis. Current generation polymer biodegradable stents have led to poorer patient outcomes in comparison to drug-eluting stents, however, and it is evident that metallic biomaterials are required, which have increased strength. To this end, a novel iron and stainless steel 316L biomaterial is proposed, fabricated through cold-gas dynamic spraying. This study analyses the effect of annealing on the Fe-316L biomaterial through corrosion, mechanical, and microstructural investigations. The quantitative data presented in this work suggests that Fe-316L, in its annealed condition, has the mechanical and corrosion properties necessary for biodegradable stent application.

Characterisation of aluminium release by the enFlow® fluid-warming system in crystalloids and blood products.

The use of uncoated aluminium-heated plates in an intravenous fluid-warming system has been shown to produce high levels of aluminium in Sterofundin 1/1E, a balanced crystalloid solution. However, the effect of this fluid-warming device on other balanced crystalloid solutions and blood products has not been studied. Using mass spectrometry we measured aluminium levels in Plasma-Lyte 148, compound sodium lactate solution, 4% human albumin solution, expired resuspended packed red cells and fresh frozen plasma that were pumped through an enFlow® fluid-warming system at 2 ml.min-1 . Samples were taken at baseline before heating and then at 10-min intervals up to 60 min with the system set to warm the fluids to 40 °C. High concentrations of aluminium were found for Plasma-Lyte 148 and compound sodium lactate solutions (mean (SD) 223 (0.6) µmol.l-1 and 163 (0.2) µmol.l-1 at 60 min, respectively); both concentrations were significantly greater than the United States Food and Drug Administration recommended maximum limit for aluminium in intravenous nutrition of 25 µg.l-1 (0.9 µmol.l-1 ). Lower aluminium levels were found in 4% human albumin solutions, expired resuspended red cells and fresh frozen plasma at 60 min (mean (SD) 5.7 (0.1) µmol.l-1 , 2.7 (0.0) µmol.l-1 and 2.3 (0.4) µmol.l-1 , respectively). The process allowing addition of aluminium to be added to Sterofundin 1/1E by the enFlow fluid warmer also occurs in Plasma-Lyte 148 and compound sodium lactate solutions and to a lesser degree in blood products. The exact mechanism facilitating this process and its clinical significance remain unclear.

Molecularly imprinted polymer based quartz crystal microbalance sensor for the clinical detection of insulin.

In this study, quartz crystal microbalance sensors based on molecular imprinting technology were fabricated for real-time detection of insulin in aqueous solution and artificial plasma. This study describes the preparation of insulin imprinted poly(hydroxyethyl methacrylate)-N-methacryloyl-(l)-histidine methyl ester based quartz crystal microbalance sensor for insulin determination. Poly(hydroxyethyl methacrylate)-N-methacryloyl-(l)-histidine methyl ester based film on chip surface was synthesized by ultra violet (UV) polymerization for the detection of insulin at low concentrations. At the first step, N-methacryloyl-(l)-histidine methyl ester complex was formed with insulin and then, the insulin imprinted film has been prepared. The characterization of the polymeric film has been conducted with ellipsometry, contact angle, Fourier transform infrared-attenuated total reflectance and atomic force microscopy measurements. Langmuir, Freundlich and Langmuir-Freundlich adsorption isotherm models were applied for this system. The best fitted model to explain the interactions between molecular imprinted chip and insulin molecules was the Langmuir adsorption isotherm (R2: 0.999). The repeatability of insulin imprinted chip was investigated by using of equilibration-binding-regeneration cycles for four times. The detection limit was found as 0.00158 ng/mL. According to the results, the QCM sensor has showed low-detection limit, high selectivity and sensitivity for insulin assay.

A novel microemulsion-based isotonic perfusate modulated by Ringer's solution for improved microdialysis recovery of liposoluble substances.

BACKGROUND: Microdialysis is promising technique for dynamic microbiochemical sampling from tissues. However, the application of typical aqueous perfusates to liposoluble substances is limited. In this study, a novel microemulsion (ME)-based isotonic perfusate (RS-ME) was prepared to improve the recovery of liposoluble components using microdialysis probes. RESULTS: Based on pseudo-ternary phase diagrams and comparisons of the ME area, Kolliphor® EL and Transcutol® P were selected as the surfactant and co-surfactant, respectively, with a weight ratio (Km) of 2:1 and ethyl oleate as the oil phase. The ME was mixed with Ringer's solution at a 1:6 ratio (v/v) to obtain the isotonic RS-ME. The droplet size distribution of the ME in RS-ME was 78.3 ± 9.2 nm, with a zeta potential of - 3.5 ± 0.3 mV. By microdialysis perfusion, RS-ME achieved higher recovery rates of the poorly water-soluble compounds evodiamine (EVO) and ruthenium (RUT), i.e., 58.36 ± 0.57% and 49.40 ± 0.57%, respectively, than those of 20% (v/v) PEG 400 Ringer's solution (RS-PEG) and 10% (v/v) ethanol Ringer's solution (RS-EtOH). In vivo microdialysis experiments confirmed that RS-ME captured EVO and RUT molecules around the dialysis membrane more efficiently and exhibited less spreading than RS-PEG and RS-EtOH. CONCLUSIONS: Owing to the nanosized droplets formed by lipid components in the RS-ME and the limited dispersion out of the dialysis membrane, we obtained good biocompatibility and reliable dialysis results, without affecting the tissue microenvironment. As a novel perfusate, RS-ME provides an easy and reliable approach to the microdialysis sampling of fat-soluble components.

Biodegradable Poly(l-lactic acid) (PLLA) Coatings Fabricated from Nonsolvent Induced Phase Separation for Improving Corrosion Resistance of Magnesium Rods in Biological Fluids.

Magnesium (Mg)-based biometals are increasingly becoming a promising candidate of the next-generation implantable materials due to their unique properties, such as high biocompatibility, favorable mechanical strength, and good biodegradability in physiological conditions. However, the swift corrosion of Mg, resulting in early loss of structural support, has posed an enormous challenge in clinical application of Mg-based implants. To overcome these limitations, herein we developed a novel method, which combines the traditional dip-coating with nonsolvent induced phase separation (NIPS), to fabricate biodegradable PLLA coatings with controlled membrane morphology on pure Mg rods. Unlike the conventional dip-coating, where the polymer solution on the Mg substrates is left to evaporate directly under proper atmosphere, in NIPS, the polymer solution on the substrates is not left to dry but immersed in a nonsolvent of the PLLA, leading to the precipitation of polymer networks. Our results demonstrated that various polymer coatings with different morphologies and inner structures could be easily fabricated by a careful selection of nonsolvents. In comparison to dense PLLA coatings obtained from conventional solvent evaporation, PLLA coatings with a dense surface and porous inner structure were obtained when hexane and petroleum ether were used as the nonsolvents, while PLLA coatings with a completely porous structure were obtained when polar acetone and ethanol were chosen. The electrochemical corrosion tests and immersion tests further showed that all polymer coatings could significantly improve the corrosion resistance and suppress the corrosion rates of the substrates. However, PLLA films obtained via NIPS had much lower pH changes and slower Mg2+ release, implying better protective effects of the fabricated coatings. Based on results of all experiments, a new process for the corrosion mechanism of Mg implants during immersion has also been proposed in this work.

Stability of benzylpenicillin potassium and ampicillin in an elastomeric infusion pump.

Some infectious diseases, such as infective endocarditis, osteomyelitis, and abscesses, require treatment with long-term intravenous antimicrobial treatment. Therefore, the patient is required to stay in the hospital to receive therapy, which lowers their quality of life. Establishing an outpatient parenteral antimicrobial therapy (OPAT) by continuous infusion pump is desired in Japan to overcome these issues. However, the 24-h stability of antimicrobial agents dissolved in infusion solutions is unclear. Thus, we investigated the stability of antimicrobial agents in five different infusion solutions in a clinical setting. Benzylpenicillin potassium (PCG) and ampicillin (ABPC) were dissolved separately in five different infusion solutions and kept at 25 or 31.1 °C for 24 h. The residual ratios were determined by high-performance liquid chromatography (HPLC). Dissolved PCG in acetate ringer solution remained stable for 24 h at temperatures of 25 and 31.1 °C (101.7 ± 1.4% and 92.9 ± 1.3%, respectively). In addition, the PCG solution did not adsorb onto the elastomeric infusion pump after 24 h at 31.1 °C. PCG dissolved in acetate ringer solution was also stable for 10 days after being kept in an elastomeric infusion pump at 4 °C (99.7 ± 0.5%). ABPC was unstable in all of the tested infusion solutions and temperatures. Based on our results, PCG in acetate ringer solution can be used in OPAT with continuous infusion pumps.

Comparison of plant- and egg yolk-based semen diluents on in vitro sperm kinematics and in vivo fertility of frozen-thawed bull semen.

Diluents using components of plant origin have been developed as an alternative to animal based extenders for the dilution of bull semen, however, it is unclear if use of these diluents results in in vivo fertility rates similar to those that occur with use of traditional egg yolk-based diluents. The aim of this study was to assess the effect of semen diluent on 60-day non-return rate (NRR) following artificial insemination (AI) with frozen-thawed bull semen. The effect of semen dilution in one of three different commercial diluents (BullXcell - egg yolk-based, OptiXcell - plant-based or AndroMed - plant-based) on post-thaw total and progressive motility as well as kinematic parameters (Experiment 1) and field fertility (Experiment 2, n = 1,480 inseminations) was assessed. Semen stored in OptiXcell had greater post-thaw total and progressive motility than AndroMed (P < 0.05) but did not differ from BullXcell. Semen stored in BullXcell had a greater beat cross frequency and straight line velocity compared to semen stored in AndroMed (P < 0.05) but did not differ when compared with use of OptiXcell; while values for these variables when using OptiXcell and AndroMed did not differ from each other (P > 0.05). There was no difference in any other sperm kinematic parameters (P > 0.05). There was no effect of diluent on 60-day NRR (71.5%, 67.8% and 70.6% for BullXcell, OptiXcell and AndroMed, respectively). In conclusion, while diluent significantly affected post-thaw sperm motility and kinematics, no effect on 60-day NRR was observed. Given that OptiXcell and AndroMed are animal protein-free media these diluents may be a suitable alternative to BullXcell for the storage of frozen-thawed bull semen.

Determination of IMM-H004 and its active glucuronide metabolite in rat plasma and Ringer's solution by ultra-performance liquid chromatography-tandem mass spectrometry.

IMM-H004 is a novel neuroprotective agent and its glucuronide metabolite IMM-H004G has similar protective effects against cerebral ischemic injury in vivo and in vitro. A specific and sensitive ultra-performance liquid chromatography-tandem mass spectrometry method was established and validated for determination of IMM-H004 and IMM-H004G simultaneously in rat plasma and Ringer's solution. Plasma samples containing IMM-H004, IMM-H004G and internal standard propranolol were prepared by direct protein precipitation in a sample-to-solvent ratio of 1:2:6 (plasma: water: acetonitrile), whereas no protein precipitation was required for Ringer's solution samples. Separation was performed with a gradient mobile phase of methanol/water with 0.5% formic acid (v/v) on Eclipse Plus C18 column (2.1×50mm, 3.5µm) at a flow rate of 0.3mL/min. The detection was operated on a triple quadrupole mass spectrometer in positive ion multiple reaction monitoring (MRM) mode. The monitored transitions were 305.1→248.1 for IMM-H004, 481.3→305.1 for IMM-H004G and 260.1→183.1 for propranolol. The linear ranges of IMM-H004 and IMM-H004G were 5 to 3000ng/mL and 10 to 3000ng/mL for plasma method and 0.5 to 500ng/mL for Ringer's solution method. All the intra-day and inter-day precision and accuracy for the two analytes in rat plasma were below 7.5% and the intra-day precision and accuracy for analytes in Ringer's solution were within ±14.7%. There was no obvious matrix effect and the recoveries of the analytes were higher than 94.2%. IMM-H004 and IMM-H004G were stable during one analytic process. The established method was applied successfully to plasma pharmacokinetic and brain microdialysis studies of IMM-H004 and IMM-H004G in rats after a single intravenous administration of IMM-H004.

Biomechanical performance of the Actifit® scaffold is significantly improved by selection of irrigation fluid.

PURPOSE: Clinical reports on meniscal scaffolds seem promising, albeit relatively paucity exists regarding their biomechanical behavior. The aim of the study is to delineate the impact of differing suture materials and the type as well as the temperature of the irrigation fluid on the pull-out strength of a polyurethane meniscal scaffold (Actifit®). MATERIALS AND METHODS: 128 specimens were utilized with horizontal sutures and uniaxial load-to-failure testing was performed. We compared two different suture materials-polydioxanone (PDS) and non-absorbable, braided polyester sutures (NABP)-as well as two common irrigation fluids-lactated Ringer's and electrolyte-free, hypotonic Mannitol-Sorbitol. All specimens were further evaluated according to two different temperatures [room temperature (20 °C) and near-core body temperature (37 °C)]. RESULTS: Mean load-to-failure was 53.3 ± 6.5 N. There was no significant difference between the NABP and the PDS group. Ringer group showed a significantly higher load-to-failure compared to Purisole (P = .0002). This was equivalent for both PDS (P = .0008) and NABP sutures (P = .0008). Significantly higher failure loads could be established for the 37° group (P = .041); yet, this difference was neither confirmed for the PDS or in in the NABP subgroup. Only the subgroup using Purisole at 37° showed significantly higher failure loads compared to 20° (P = .017). CONCLUSIONS: This study underlines the potential to improve pull-out strength during implantation of an Actifit® scaffold by alteration of the type of irrigation fluid. Lactated Ringer solution provided the highest construct stability in regard to load-to-failure testing and should be considered whenever implantation of a polyurethane meniscal scaffold is conducted.