Anti-Sporothrix Activity of Novel Copper-Itraconazole Complexes.

A series of new metal complexes, [Cu(ITZ)2Cl2] ⋅ 5H2O (1), [Cu(NO3)2(ITZ)2] ⋅ 3H2O ⋅ C4H10O (2) and [Cu(ITZ)2)(PPh3)2]NO3 ⋅ 5H2O (3) were synthesized by a reaction of itraconazole (ITZ) with the respective copper salts under reflux. The metal complexes were characterized by elemental analyses, molar conductivity, 1H and 13C{1H} nuclear magnetic resonance, UV-Vis, infrared and EPR spectroscopies. The antifungal activity of these metal complexes was evaluated against the main sporotrichosis agents: Sporothrix brasiliensis, Sporothrix schenkii, and Sporothrix globosa. All three new compounds inhibited the growth of S. brasiliensis and S. schenckii at lower concentrations than the free azole, with complex 2 able to kill all species at 4 µM and induce more pronounced alterations in fungal cells. Complexes 2 and 3 exhibited higher selectivity and no mutagenic effect at the concentration that inhibited fungal growth and affected fungal cells. The strategy of coordinating itraconazole (ITZ) to copper was successful, since the corresponding metal complexes were more effective than the parent drug. Particularly, the promising antifungal activity of the Cu-ITZ complexes makes them potential candidates for the development of an alternative drug to treat mycoses.

Bioisosteric modification on benzylidene-carbonyl compounds improved the drug-likeness and maintained the antifungal activity against Sporothrix brasiliensis.

Considering the emergence of antifungal resistance on Sporothrix brasiliensis, we aimed to assess new benzylidene-carbonyl compounds against feline-borne S. brasiliensis isolates. The compounds were designed as bioisosteres from previously reported benzylidene-ketones generating the p-coumaric (1), cinnamic (2), p-methoxycinnamic (3) and caffeic acid (4) analogues. The corresponding compounds were tested against feline isolates of S. brasiliensis with sensitivity (n = 4) and resistance (n = 5) to itraconazole (ITZ), following the M38-A2 protocol (CLSI, Reference method for broth dilution antifungal susceptibility testing of filamentous fungi M38-A2 Guideline, 2008). Eleven analogues showed activity against all fungal strains with minimum inhibitory concentrations (MIC) ≤1 mg/ml (1a-d, 2e, 3b, 3e, 4, 4a and 5e) and fungicidal concentrations (MFC) ≤1 mg/ml (1b, 1d, 3e and 4a), whereas 3 was the less active with both MIC and MFC values above 1 mg/ml. Compound 3e (4-methoxy-N-butylcinnamamide) was the most potent (MICrange 0.08-0.16 mg/ml; MFCrange 0.32-0.64 mg/ml) from the set, suggesting a different role of the substituents in ester and amide derivatives. The designed compounds proved to be important prototypes with improved drug-likeness to achieve compounds with higher activity against ITZ-resistant S. brasiliensis.

Susceptibility and resistance of Sporothrix brasiliensis to branded and compounded itraconazole formulations.

Itraconazole is the first drug of choice for the treatment of sporotrichosis and it is available at different concentrations for veterinary patients. However, therapeutic failure has been reported, limiting clinical treatment. This study evaluated the in vitro efficacy of brand-name and compounded itraconazole formulations against Sporothrix brasiliensis and estimated the itraconazole content in each tested formulation. Oral capsules were acquired from two brand-name products for human (H-IND) and veterinary (V-IND) uses, and three from compounding pharmacies in Pelotas, RS, for human (H-COMP1/H-COMP2) and veterinary (V-COMP) uses. Capsule purity was analyzed by liquid chromatography-electrospray ionization quadrupole time-of-flight mass spectrometry (LC-ESI-QTOF-MS). Antifungal activity was determined against 29 Sporothrix brasiliensis by the M38-A2 guideline of CLSI. H-IND/H-COMP1/H-COMP2 had high efficacy against S. brasiliensis (approximately 70% of total isolated susceptible), V-COMP showed moderate efficacy (51.7%), and V-IND was the least effective formulation (37.9%). Thirty-four percent of the total isolates were resistant to all formulations. Furthermore, itraconazole content did not match the concentration indicated by the manufacturers, ranging from 387.70 to 7.81 µg/mg (H-COMP2 > V-COMP > H-IND > H-COMP1 > V-IND). Therefore, it is possible that the formulations showed different in vitro efficacy due to the difference in their itraconazole contents. Given the emergence of antifungal resistance for all formulations, the choice product to be used must follow susceptibility testing. Stringent quality control measures are recommended for product manufactures to assure drug content uniformity.

Formulation and Evaluation of a Novel Itraconazole-Clotrimazole Topical Emulgel for the Treatment of Sporotrichosis.

In recent years, the development of new pharmaceutical formulations for the treatment of sporotrichosis has become a relevant research field. In this work, we aimed to develop an emulgel containing itraconazole and clotrimazole to ensure therapeutic effectiveness against Sporothrix brasiliensis. The topical use of a formulation that combines both drugs represents an interesting option for the complementary treatment of sporotrichosis. The emulgel formulation was prepared and evaluated for its zeta potential, viscosity, in vitro antifungal activity and stability at different storage conditions. The results showed that the newly developed emulgel displayed promising physicochemical characteristics, as well as a good in vitro inhibitory activity against S. brasiliensis yeasts. The results obtained in this work suggest that the emulgel containing itraconazole and clotrimazole might highly be efficient and a complementary therapy to oral administration in the treatment of sporotrichosis.

Development of a Method for the Quantification of Clotrimazole and Itraconazole and Study of Their Stability in a New Microemulsion for the Treatment of Sporotrichosis.

Sporotrichosis occurs worldwide and is caused by the fungus Sporothrix brasiliensis. This agent has a high zoonotic potential and is transmitted mainly by bites and scratches from infected felines. A new association between the drugs clotrimazole and itraconazole is shown to be effective against S. brasiliensis yeasts. This association was formulated as a microemulsion containing benzyl alcohol as oil, Tween® 60 and propylene glycol as surfactant and cosurfactant, respectively, and water. Initially, the compatibility between clotrimazole and itraconazole was studied using differential scanning calorimetry (DSC), thermogravimetric analysis (TG), Fourier transform infrared spectroscopy (FTIR), and X-ray powder diffraction (PXRD). Additionally, a simple and efficient analytical HPLC method was developed to simultaneously determine the concentration of clotrimazole and itraconazole in the novel microemulsion. The developed method proved to be efficient, robust, and reproducible for both components of the microemulsion. We also performed an accelerated stability study of this formulation, and the developed analytical method was applied to monitor the content of active ingredients. Interestingly, these investigations led to the detection of a known clotrimazole degradation product whose structure was confirmed using NMR and HRMS, as well as a possible interaction between itraconazole and benzyl alcohol.

Itraconazole encapsulated PLGA-nanoparticles covered with mannose as potential candidates against leishmaniasis.

Leishmaniasis is a neglected disease threatening over 350 million people. Antimonials are first-line drugs due to resistance and side effects there is a demand for alternative chemotherapy. Itraconazole (ITZ) is an antimycotic. It was encapsulated into poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) and covered with mannose. The NPs were 250 nm and -1.1 mV ± 0.7. PLGA-ITZ-mannose NPs presented a toxicity of 20.7% for J774 cells, and no toxicity for THP 1. The J774 cells were infected with three Leishmania promastigotes strains and treated with ITZ loaded PLGA NPs with/without mannose. The parasite percentage of L.(V.) panamensis intracellular amastigotes significantly (p < 0.01) decreased from 34.4% to 13.7% and 5.7% for PLGA-ITZ-mannose NPs and PLGA-ITZ NPs, respectively. For L.(L.) infantum there was a reduction (p < 0.001) from 18.1% to 4.8% and 8.3% for PLGA-ITZ-mannose NPs and PLGA-ITZ NPs, respectively. Further with L.(L.) braziliensis amastigotes there was a significant reduction (p < 0.001) from 54.9% to 28% and 21.1% for PLGA-ITZ-mannose NPs and PLGA-ITZ NPs, respectively. Adding mannose increased the efficacy PLGA-ITZ NPs against L.(L.) infantum, while it had no effect against L(V.) panamensis and L.(L.) braziliensis amastigotes. We recommend further investigation of PLGA-ITZ-mannose NPs in animal models to evaluate their potential. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 00B: 000-000, 2018. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 680-687, 2019.

Hot Melt Extrudates Formulated Using Design Space: One Simple Process for Both Palatability and Dissolution Rate Improvement.

This work aimed at obtaining an optimized itraconazole (ITZ) solid oral formulation in terms of palatability and dissolution rate by combining different polymers using hot melt extrusion (HME), according to a simplex centroid mixture design. For this, the polymers Plasdone® (poly(1-vinylpyrrolidone-co-vinyl acetate) [PVP/VA]), Klucel® ELF (2-hydroxypropyl ether cellulose [HPC]), and Soluplus® (SOL, polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol) were processed using a laboratory HME equipment operating without recirculation at constant temperature. Samples were characterized by physicochemical assays, as well as dissolution rate and palatability using an e-tongue. All materials became homogeneous and dense after HME processing. Thermal and structural analyses demonstrated drug amorphization, whereas IR spectroscopy evidenced drug stability and drug-excipient interactions in HME systems. Extrudates presented a significant increase in dissolution rate compared to ITZ raw material, mainly with formulations containing PVP/VA and HPC. A pronounced improvement in taste masking was also identified for HME systems, especially in those containing higher amounts of SOL and HPC. Data showed polymers act synergistically favoring formulation functional properties. Predicted best formulation should contain ITZ 25.0%, SOL 33.2%, HPC 28.9%, and PVP/VA 12.9% (w/w). Optimized response considering dissolution rate and palatability reinforces the benefit of polymer combinations.

Efeito da incorporação de agentes antifúngicos na resistência à tração e porosidade de materiais resilientes temporários para base de próteses / Effect of incorporation of antifungal agents on the ultimate tensile strength and porosity of temporary soft denture liners

Este estudo investigou a resistência à tração (ou limite de resistência à tração- LRT) e a porosidade de reembasadores resilientes temporários modificados por concentrações inibitórias mínimas (CIMs) de agentes antifúngicos para o biofilme Candida albicans (SC5314). Para os testes de LRT, corpos de prova em forma de halteres (n=7) com uma área transversal de 33 mm x 6 mm x 3 mm foram produzidos para os materiais resilientes (Trusoft e Softone) sem (controle) ou com incorporação de cinco fármacos em suas CIMs: nistatina- 0,032 g; diacetato de clorexidina- 0,064; cetoconazol- 0,128 g; miconazol- 0,256 g; itraconazol-0,256 g (grama de fármaco por grama de pó de material resiliente). Após a plastificação, as amostras foram imersas em água destilada a 37°C durante 24 h, 7 e 14 dias e, então, testadas em tensão em uma máquina universal de ensaios (EMIC DL-500 MF) a 40 mm/min. A porosidade foi mensurada por absorção de água, com base na exclusão do efeito plastificante. Inicialmente, determinou-se por isotermas de sorção, que a solução de armazenagem adequada para os corpos de prova (65 mm x 10 mm x 3,3 mm) de ambos os materiais foi o cloreto de cálcio anidro a 50% (S50). Assim, o fator de porosidade (FP) foi calculado para os grupos de estudo (n=10) formados por espécimes sem (controle) ou com incorporação de fármaco em suas CIMs (nistatina, clorexidina ou cetoconazol) após a armazenagem em água destilada ou S50 por 24 h, 7 e 14 dias. Os dados de resistência à tração (MPa) e percentagem de alongamento (%) foram submetidos à ANOVA de 3 fatores seguida pelo teste de Tukey (=0,05). Os dados de porosidade foram analisados estatisticamente por ANOVA de medidas repetidas para 4 fatores e teste de Tukey (=0,05). Ao final de 14 dias, a resistência à tração para ambos os materiais foi significativamente menor nos grupos modificados pelo miconazol e itraconazol em relação aos outros grupos (P<0,0001), que não mostraram diferenças significativas entre si (P>0,05). Após 7 e 14 dias em água, o miconazol e itraconazol adicionados a ambos os materiais resultaram em percentagens significativamente menores de alongamento em comparação com os outros fármacos e ao controle (P<0,0001), que foram semelhantes entre si (P>0,05). O cetoconazol não resultou em alterações significativas no FP para ambos os materiais resilientes em água ao longo de 14 dias (P>0,05). Em comparação aos controles, houve aumento dos FPs do Softone e Trusoft aos 14 dias de imersão em água somente após a adição de nistatina e clorexidina e de clorexidina, respectivamente (P<0,05). Ambos os materiais não apresentaram alterações significativas no FP em até 14 dias de imersão na S50, em comparação aos controles (P>0,05). Em todas as condições experimentais, os FPs do Softone e Trusoft foram significativamente menores quando imersos em S50 em comparação com a água destilada (P<0,05). Concluiu-se que a adição de nistatina, clorexidina e cetoconazol nas CIMs para o biofilme de C. albicans não resultou em efeitos deletérios na resistência à tração e na percentagem de alongamento dos materiais resilientes temporários para base de prótese até o período de 14 dias. A adição de antifúngicos nas CIMs não resultou em efeitos adversos à porosidade de ambos os materiais resilientes temporários em diferentes períodos de imersão em água, com exceção da clorexidina e nistatina no Softone e clorexidina no Trusoft aos 14 dias. Não foram observados efeitos deletérios para a porosidade de ambos os materiais resilientes modificados com as CIMs dos fármacos durante os 14 dias de imersão na S50.(AU)

This study investigated the tensile strength (ultimate tensile strength- UTS) and porosity of temporary soft denture liners modified by minimum inhibitory concentrations (MICs) of antifungal agents for Candida albicans biofilm (SC5314). For UTS tests, dumbbell-shaped specimens (n=7) with a central cross-sectional area of 33 mm x 6 mm x 3 mm were produced by resilient materials (Trusoft and Softone) without (control) or with incorporation of five drugs at MICs: nystatin- 0.032 g; chlorhexidine diacetate-0.064 g; ketoconazole- 0.128 g; miconazole- 0.256 g; itraconazole- 0.256 g (each per gram of soft liner powder). After plasticization, specimens were immersed in distilled water at 37°C for 24 h, 7 and 14 days, and then tested in tension in a universal testing machine (EMIC DL-500 MF) at 40 mm/min. The porosity was measured by water absorption, based on exclusion of the plasticizer effect. Initially, it was determined by sorption isotherms that the adequate storage solution for specimens (65 mm x 10 mm x 3.3 mm) of both materials was 50% anhydrous calcium chloride (S50). Then, the porosity factor (PF) was calculated for the study groups (n=10) formed by specimens without (control) or with drug incorporation at MICs (nystatin, chlorhexidine or ketoconazole) after storage in distilled water or S50 for 24 h, 7 and 14 days. Data of tensile strength (MPa) and elongation percentage (%) were submitted to 3-way ANOVA followed by Tukey's test (=0.05). Data of porosity were statistically analyzed by 4-way repeated measures ANOVA and Tukeys test (=0.05). At the end of 14 days, the tensile strength for both materials was significantly lower in the groups modified by miconazole and itraconazole compared to the other groups (P<0.0001), which showed no significant difference between them (P>0.05). After 7 and 14 days in water, miconazole and itraconazole added into both materials result in significant lower elongation percentages compared to the other drugs and control (P<.0001), which were similar to each other (P>0.05). Ketoconazole resulted in no significant changes in PF for both liners in water over 14 days (P>0.05). Compared to the controls, Softone and Trusoft PFs were increased at 14-day water immersion only after addition of nystatin and chlorhexidine, and chlorhexidine, respectively (P<0.05). Both materials showed no significant changes in PF in up to 14 days of S50 immersion, compared to the controls (P>0.05). In all experimental conditions, Softone and Trusoft PFs were significantly lower when immersed in S50 compared to distilled water (P<0.05). It was concluded that the addition of the nystatin, chlorhexidine and ketoconazole at MICs for C. albicans biofilm resulted in no harmful effects on the ultimate tensile strength and elongation percentage of the temporary soft denture liners up to 14-day period. The addition of antifungals at MICs resulted in no detrimental effects for the porosity of both temporary soft liners in different periods of water immersion, except for chlorhexidine and nystatin in Softone and chlorhexidine in Trusoft at 14 days. No deleterious effect was observed for the porosity of both soft liners modified by the drugs at MICs over 14 days of S50 immersion.(AU)

Melanin protects Paracoccidioides brasiliensis from the effects of antimicrobial photodynamic inhibition and antifungal drugs.

Paracoccidioidomycosis (PCM) is a public health concern in Latin America and South America that when not correctly treated can lead to patient death. In this study, the influence of melanin produced by Paracoccidioides spp. on the effects of treatment with antimicrobial photodynamic inhibition (aPI) and antifungal drugs was evaluated. aPI was performed using toluidine blue (TBO) as a photosensitizer and a 630-nm light-emitting diode (LED) light. The antifungals tested were itraconazole and amphotericin B. We evaluated the effects of each approach, aPI or antifungals, against nonmelanized and melanized yeast cells by performing susceptibility tests and by quantifying oxidative and nitrosative bursts during the experiments. aPI reduced nonmelanized cells by 3.0 log units and melanized cells by 1.3 log units. The results showed that melanization protects the fungal cell, probably by acting as a scavenger of nitric oxide and reactive oxygen species, but not of peroxynitrite. Melanin also increased the MICs of itraconazole and amphotericin B, and the drugs were fungicidal for nonmelanized and fungistatic for melanized yeast cells. Our study shows that melanin production by Paracoccidioides yeast cells serves a protective function during aPI and treatment with itraconazole and amphotericin B. The results suggest that melanin binds to the drugs, changing their antifungal activities, and also acts as a scavenger of reactive oxygen species and nitric oxide, but not of peroxynitrite, indicating that peroxynitrite is the main radical that is responsible for fungal death after aPI.

Effect of the addition of antimicrobial agents on Shore A hardness and roughness of soft lining materials.

PURPOSE: While the incorporation of antimicrobial agents into soft denture liners has been suggested as a reliable alternative treatment for denture stomatitis, it may affect the liner's properties. The effect of addition of antimicrobial agents for the treatment of denture stomatitis on the surface roughness and Shore A hardness of soft lining materials was evaluated. MATERIALS AND METHODS: The test groups comprised specimens (36 × 7 × 6 mm(3) ) of soft materials (Softone and Trusoft) without (control) or with incorporation of drugs (nystatin, miconazole, ketoconazole, chlorhexidine diacetate, and itraconazole). Hardness (Shore A) and roughness (Ra) were evaluated after immersion of specimens (n = 10) in distilled water at 37°C for 24 hours, 7 and 14 days. Data were analyzed by 3-way ANOVA/Tukey's test (α = 0.05). RESULTS: After 14 days, an increase (p < 0.05) was observed in the hardness of soft materials with time for the modified specimens, except for itraconazole. Addition of drugs increased the Softone roughness only for the addition of miconazole and chlorhexidine (p < 0.05), and did not increase the roughness of Trusoft with time. Only chlorhexidine and itraconazole altered the roughness compared to the control for each material (p < 0.05). CONCLUSIONS: The smallest changes of hardness and roughness with time in the modified groups compared to controls were observed for itraconazole groups for both materials.

Antimalarial activity of potential inhibitors of Plasmodium falciparum lactate dehydrogenase enzyme selected by docking studies.

The Plasmodium falciparum lactate dehydrogenase enzyme (PfLDH) has been considered as a potential molecular target for antimalarials due to this parasite's dependence on glycolysis for energy production. Because the LDH enzymes found in P. vivax, P. malariae and P. ovale (pLDH) all exhibit ∼90% identity to PfLDH, it would be desirable to have new anti-pLDH drugs, particularly ones that are effective against P. falciparum, the most virulent species of human malaria. Our present work used docking studies to select potential inhibitors of pLDH, which were then tested for antimalarial activity against P. falciparum in vitro and P. berghei malaria in mice. A virtual screening in DrugBank for analogs of NADH (an essential cofactor to pLDH) and computational studies were undertaken, and the potential binding of the selected compounds to the PfLDH active site was analyzed using Molegro Virtual Docker software. Fifty compounds were selected based on their similarity to NADH. The compounds with the best binding energies (itraconazole, atorvastatin and posaconazole) were tested against P. falciparum chloroquine-resistant blood parasites. All three compounds proved to be active in two immunoenzymatic assays performed in parallel using monoclonals specific to PfLDH or a histidine rich protein (HRP2). The IC(50) values for each drug in both tests were similar, were lowest for posaconazole (<5 µM) and were 40- and 100-fold less active than chloroquine. The compounds reduced P. berghei parasitemia in treated mice, in comparison to untreated controls; itraconazole was the least active compound. The results of these activity trials confirmed that molecular docking studies are an important strategy for discovering new antimalarial drugs. This approach is more practical and less expensive than discovering novel compounds that require studies on human toxicology, since these compounds are already commercially available and thus approved for human use.

In vitro antifungal activity and toxicity of itraconazole in DMSA-PLGA nanoparticles.

Itraconazole (ITZ) is a drug used to treat various fungal infections and may cause side effects. The aim of this study was to develop and evaluate the in vitro activity of DMSA-PLGA nanoparticles loaded with ITZ against Paracoccidioides brasiliensis, as well as their cytotoxicity. Nanoparticles were prepared using the emulsification-evaporation technique and characterized by their encapsulation efficiency, morphology (TEM), size (Nanosight) and charge (zeta potential). Antifungal efficacy in P. brasiliensis was determined by minimal inhibition concentration (MIC), and cytotoxicity using MTT assay. ITZ was effectively incorporated in the PLGA-DMSA nanoparticles with a loading efficiency of 72.8 +/- 3.50%. The shape was round with a solid polymeric structure, and a size distribution of 174 +/- 86 nm (Average +/- SD). The particles were negatively charged. ITZ-NANO presented antifungal inhibition (MIC = 6.25 ug/mL) against P. brasiliensis and showed lower in vitro cytotoxicity than free drug (ITZ).