The thermoluminescence glow curves of LiF:Mg,Ti: characteristics and mechanisms.

The features of the glow curves of LiF:Mg,Ti are dependent on many parameters of irradiation, storage, ionisation density and readout. These are presented herein with emphasis on their complexity. Successful applications require some understanding of the great diversity of the glow curves. Glow curve analysis/deconvolution in order to better understand the mechanisms is a 'tricky business' even with Tm-Tstop analysis. In the theoretical framework of spatially correlated trapping and luminescent centres, a mechanism is described which simulates the behaviour of composite peak 5 at different cooling rates and following photon bleaching at 3.65 eV.

Detection of Low-Concentration Biological Samples Based on a QBIC Terahertz Metamaterial Sensor.

Quasi-bound state in the continuum (QBIC) can effectively enhance the interaction of terahertz (THz) wave with matter due to the tunable high-Q property, which has a strong potential application in the detection of low-concentration biological samples in the THz band. In this paper, a novel THz metamaterial sensor with a double-chain-separated resonant cavity structure based on QBIC is designed and fabricated. The process of excitation of the QBIC mode is verified and the structural parameters are optimized after considering the ohmic loss by simulations. The simulated refractive index sensitivity of the sensor is up to 544 GHz/RIU, much higher than those of recently reported THz metamaterial sensors. The sensitivity of the proposed metamaterial sensor is confirmed in an experiment by detecting low-concentration lithium citrate (LC) and bovine serum albumin (BSA) solutions. The limits of detection (LoDs) are obtained to be 0.0025 mg/mL (12 µM) for LC and 0.03125 mg/mL (0.47 µM) for BSA, respectively, both of which excel over most of the reported results in previous studies. These results indicate that the proposed THz metamaterial sensor has excellent sensing performances and can well be applied to the detection of low-concentration biological samples.

Glass science behind lithium silicate glass-ceramics.

OBJECTIVES: Lithium silicate-based glass ceramics have evolved as a paramount restorative material in restorative and prosthetic dentistry, exhibiting outstanding esthetic and mechanical performance. Along with subtractive machining techniques, this material class has conquered the market and satisfied the patients' needs for a long-lasting, excellent, and metal-free alternative for single tooth replacements and even smaller bridgework. Despite the popularity, not much is known about the material chemistry, microstructure and terminal behaviour. METHODS: This article combines a set of own experimental data with extensive review of data from literature and other resources. Starting at manufacturer claims on unique selling propositions, properties, and microstructural features, the aim is to validate those claims, based on glass science. Deep knowledge is mandatory for understanding the microstructure evolution during the glass ceramic process. RESULTS: Fundamental glass characteristics have been addressed, leading to formation of time-temperature-transformation (TTT) diagrams, which are the basis for kinetic description of the glass ceramic process. Nucleation and crystallization kinetics are outlined in this contribution as well as analytical methods to describe the crystalline fraction and composition qualitatively and quantitatively. In relation to microstructure, the mechanical performance of lithium silicate-based glass ceramics has been investigated with focus on fracture strength versus fracture toughness as relevant clinical predictors. CONCLUSION: Fracture toughness has been found to be a stronger link to initially outlined manufacturer claims, and to more precisely match ISO recommendations for clinical indications.

Spent LiFePO4: An old but vigorous peroxymonosulfate activator for degradation of organic pollutants in water.

Iron-based catalysts have been demonstrated to activate peroxymonosulfate (PMS) to generate reactive radicals, which is however limited by their complex preparation process, high costs and inefficiency for practical applications. Herein we obtain spent LiFePO4 (SLFP), with powerful catalytic capacity by a simple one-step treatment of the retired LiFePO4 cathode material, for PMS activation to decontaminate organic pollutants. Lithium defects and oxygen vacancies in SLFP play critical roles for PMS utilization, further confirmed by density functional theory (DFT) calculations. SLFP materials rapidly adsorb PMS, and the surface PMS is activated by Fe(II) to generate radicals, with •OH playing a major role for the degradation of organics after multi-step reactions. The SLFP/PMS process is finally validated for ability to remove organic contaminants and potential environmental application.

Dissolution of cellulose into supercritical water and its dissolving state followed by structure formation from the solution system.

Cellulose was treated with supercritical water at 668 K and 25 MPa for 0.04 s in this study. The cellulose/water system was transparent at room temperature for a while after supercritical water treatment before a precipitate gradually appeared over several hours. The precipitation process was monitored by synchrotron X-ray scattering. The scattering functions of fractal systems and flat-like structures were utilized to explain the experimentally observed small-angle scattering profiles. Immediately after supercritical water treatment, the cellulose appeared to dissolve with a fractal dimension D of approximately 1, indicating that the cellulose molecules were rigid, followed by aggregation into a 5-nm-thick flat-like structure. The flat-like structure was determined to be similar to the molecular sheets observed during the early stages of precipitation in the cellulose/aqueous sodium hydroxide and cellulose/aqueous lithium hydroxide/urea systems. Resultant regenerated cellulose had high crystallinity, large crystal size, and a low degree of polymerization.

Lithium superoxide encapsulated in a benzoquinone anion matrix.

Lithium peroxide is the crucial storage material in lithium-air batteries. Understanding the redox properties of this salt is paramount toward improving the performance of this class of batteries. Lithium peroxide, upon exposure to p-benzoquinone (p-C6H4O2) vapor, develops a deep blue color. This blue powder can be formally described as [Li2O2][Formula: see text] [LiO2][Formula: see text] {Li[p-C6H4O2]}0.7, though spectroscopic characterization indicates a more nuanced structural speciation. Infrared, Raman, electron paramagnetic resonance, diffuse-reflectance ultraviolet-visible and X-ray absorption spectroscopy reveal that the lithium salt of the benzoquinone radical anion forms on the surface of the lithium peroxide, indicating the occurrence of electron and lithium ion transfer in the solid state. As a result, obligate lithium superoxide is formed and encapsulated in a shell of Li[p-C6H4O2] with a core of Li2O2 Lithium superoxide has been proposed as a critical intermediate in the charge/discharge cycle of Li-air batteries, but has yet to be isolated, owing to instability. The results reported herein provide a snapshot of lithium peroxide/superoxide chemistry in the solid state with redox mediation.

Efficient homogeneous TEMPO-mediated oxidation of cellulose in lithium bromide hydrates.

An appropriate cellulose-dissolving solvent is critical for the homogeneous oxidation of cellulose using TEMPO (2, 2, 6, 6-tetramethylpiperidine-1-oxyl)-mediated system. Herein, TEMPO/NaClO/NaClO2 system in lithium bromide hydrates (LBHs) was developed for the homogeneous selective-oxidation of cellulose, which was two-stage protocol involving cellulose dissolution and homogeneous oxidation. Specifically, cellulose was firstly dissolved in LiBr·3.5H2O and offered the optimal pH (5.6) for the subsequent TEMPO/NaClO/NaClO2 oxidation without precipitation of the cellulose chains. Effect of reaction conditions on cellulose oxidation was investigated. The results showed that high degree of oxidation (DO) and evenly distributed carboxyl could be achieved. The particle size gradually decreased with DO, and oxidized cellulose with high water solubility and amorphous structure could be obtained. Furthermore, FT-IR, 13C NMR and fractionation analysis verified that cellulose was successfully converted and the carboxyl uniformly distributed onto the cellulose chains. This TEMPO-mediated system using LBHs as solvent presented an efficient method on the homogeneous selective oxidation of primary hydroxyl in cellulose.

Characterization the structural property and degradation behavior of corn starch in KOH/thiourea aqueous solution.

Finding an efficient and eco-friendly solution for starch dissolution has attracted considerable attentions in recent years. This study investigated the structural characteristics, and degradation behavior of corn starch in KOH/thiourea aqueous solution by the comparison with DMSO/LiBr and 1-allyl-3-methylimidazolium chloride (AMIMCl). Results showed that KOH/thiourea solution was an effective solvent for corn starch dissolution (30 min with 97.01% solubility). X-ray diffraction (XRD) and 13C CP-MAS NMR spectroscopy revealed that native crystallinity of the corn starch was altered by all tested solvents, especially DMSO/LiBr and AMIMCl. Conversely, this new solvent did not change the primary molecular structure, chain-length distribution, or thermal stability of starch, compared with the native starch. Furthermore, KOH/thiourea solution was more suitable for measuring the molecular weight of corn starch, with a weight-average molecular weight (Mw) of 7.18 × 107 g/mol. Therefore, KOH/thiourea solution is a promising novel solvent for starch dissolution and structural exploration.

Uptake of Upconverting Nanoparticles by Breast Cancer Cells: Surface Coating versus the Protein Corona.

Fluorophores with multifunctional properties known as rare-earth-doped nanoparticles (RENPs) are promising candidates for bioimaging, therapy, and drug delivery. When applied in vivo, these nanoparticles (NPs) have to retain long blood-circulation time, bypass elimination by phagocytic cells, and successfully arrive at the target area. Usually, NPs in a biological medium are exposed to proteins, which form the so-called "protein corona" (PC) around the NPs and influence their targeted delivery and accumulation in cells and tissues. Different surface coatings change the PC size and composition, subsequently deciding the fate of the NPs. Thus, detailed studies on the PC are of utmost importance to determine the most suitable NP surface modification for biomedical use. When it comes to RENPs, these studies are particularly scarce. Here, we investigate the PC composition and its impact on the cellular uptake of citrate-, SiO2-, and phospholipid micelle-coated RENPs (LiYF4:Yb3+,Tm3+). We observed that the PC of citrate- and phospholipid-coated RENPs is relatively stable and similar in the adsorbed protein composition, while the PC of SiO2-coated RENPs is larger and highly dynamic. Moreover, biocompatibility, accumulation, and cytotoxicity of various RENPs in cancer cells have been evaluated. On the basis of the cellular imaging, supported by the inhibition studies, it was revealed that RENPs are internalized by endocytosis and that specific endocytic routes are PC composition dependent. Overall, these results are essential to fill the gaps in the fundamental understanding of the nano-biointeractions of RENPs, pertinent for their envisioned application in biomedicine.

Quantum Calculations of VX Ammonolysis and Hydrolysis Pathways via Hydrated Lithium Nitride.

Recently, lithium nitride (Li3N) has been proposed as a chemical warfare agent (CWA) neutralization reagent for its ability to produce nucleophilic ammonia molecules and hydroxide ions in aqueous solution. Quantum chemical calculations can provide insight into the Li3N neutralization process that has been studied experimentally. Here, we calculate reaction-free energies associated with the Li3N-based neutralization of the CWA VX using quantum chemical density functional theory and ab initio methods. We find that alkaline hydrolysis is more favorable to either ammonolysis or neutral hydrolysis for initial P-S and P-O bond cleavages. Reaction-free energies of subsequent reactions are calculated to determine the full reaction pathway. Notably, products predicted from favorable reactions have been identified in previous experiments.

Enhancing the lithium content of white button mushrooms Agaricus bisporus using LiNO3 fortified compost: effects on the uptake of Li and other trace elements.

Attempts to bio-enrich fungal biomass with an essential trace elements to produce dietary supplements have some tradition and an example is selenium. Lithium salts have medical applications, but safer forms are sought after, and lithiated foods and food supplements may be an alternative. This study evaluated the lithiation of white Agaricus bisporus mushrooms using commercial compost fortified with LiNO3 and investigated the effects on co-accumulation of trace elements. The fortifications at levels of 1.0, 5.0, 10, 50 and 100 mg·kg-1 dw, resulted in corresponding median increases in mushroom Li concentrations of 0.74, 5.0, 7.4, 19 and 21 mg kg-1 dw, respectively, relative to 0.031 mg kg-1 dw in control mushrooms. The bio-concentration potential for Li uptake decreased at higher levels of fortification, with saturation occurring at 100 mg·kg-1, and the level of 500 mg kg-1 mycelium failed to produce mushrooms. The compost fortification resulted in up to several hundred-fold enrichment of mushrooms compared to those grown on control compost, underlining their potential therapeutic use. At higher fortification levels, some effects were seen on the co-accumulation of other elements, such as Ag (stems), As, Cd, Cr, Cs, Cu, Hg (stems), Mn, Rb, Sr, U (stems) and Zn; 0.05 < p < 0.10), but no effects were seen for Ag (caps), Al, Ba, Co, Hg (caps) Ni, Tl, U (caps), and V (p > 0.05).

Investigation of Mg-xLi-Zn alloys for potential application of biodegradable bone implant materials.

Implant therapy after osteosarcoma surgery is a major clinical challenge currently, especially the requirements for mechanical properties, degradability of the implants, and their inhibition of residual tumor cells. Biodegradable magnesium (Mg) alloy as medical bone implant material has full advantages and huge potential development space. Wherein, Mg-lithium (Li) based alloy, as an ultra-light alloy, has good properties for implants under certain conditions, and both Mg and Li have inhibitory effects on tumor cells. Therefore, Mg-Li alloy is expected to be applied in bone implant materials for mechanical supporting and inhibiting tumor cells simultaneously. In this contribution, the Mg-xLi-Zinc (Zn) series alloys (x = 3 wt%, 6 wt%, 9 wt%) were prepared to study the influence of different elements and contents on the structure and properties of the alloy, and the biosafety of the alloy was also evaluated. Our data showed that the yield strength, tensile strength, and elongation of as-cast Mg-xLi-Zn alloy were higher than those of as-cast Mg-Zn alloy; Mg-xLi-Zn alloy can kill osteosarcoma cells (MG-63) in a concentration-dependent manner, wherein Mg-3Li-Zn alloy (x = 3 wt%) and Mg-6Li-Zn alloy (x = 6 wt%) promoted the proliferation of osteoblasts (MC3T3) at a certain concentration of Li. In summary, our study demonstrated that the Mg-6Li-Zn alloy could be potentially applied as a material of orthopedic implant for its excellent multi-functions.

Gastrodin attenuates lithium-pilocarpine-induced epilepsy by activating AMPK-mediated PPARα in a juvenile rat model.

Gastrodin has shown the potential as an anticonvulsant. Epilepsy is a neurological disease with significant effects in children. In the current study, the therapeutic potential of gastrodin in handling pediatric epilepsy was explored by focusing on the AMPK/PPARα pathway. Three-week-old Sprague-Dawley rats were subjected to lithium-pilocarpine method to induce epileptic symptoms and then administrated with gastrodin. The effects of gastrodin on rats were first assessed using electroencephalogram (EEG) recording, Racine classification, Morris water maze test, and histological staining. The levels of BDNF and NGF, and the activity of AMPK/PPARα were measured. Based on the results of EEG, behavior analyses, and histological staining, epileptic symptoms were significantly alleviated by gastrodin. Moreover, the administration of gastrodin also suppressed the levels of BDNF and NGF, and activated the AMPK/PPARα pathway. In conclusion, our results demonstrated that gastrodin contributed to the alleviation of pediatric epilepsy by activating AMPK/PPARα signaling transduction.

A Fast and General Route to Ketones from Amides and Organolithium Compounds under Aerobic Conditions: Synthetic and Mechanistic Aspects.

We report that the nucleophilic acyl substitution reaction of aliphatic and (hetero)aromatic amides by organolithium reagents proceeds quickly (20 s reaction time), efficiently, and chemoselectively with a broad substrate scope in the environmentally responsible cyclopentyl methyl ether, at ambient temperature and under air, to provide ketones in up to 93 % yield with an effective suppression of the notorious over-addition reaction. Detailed DFT calculations and NMR investigations support the experimental results. The described methodology was proven to be amenable to scale-up and recyclability protocols. Contrasting classical procedures carried out under inert atmospheres, this work lays the foundation for a profound paradigm shift of the reactivity of carboxylic acid amides with organolithiums, with ketones being straightforwardly obtained by simply combining the reagents under aerobic conditions and with no need of using previously modified or pre-activated amides, as recommended.

Lithium Hydroxide Hydrolysis Combined with MALDI TOF Mass Spectrometry for Rapid Sphingolipid Detection.

Sphingolipids have diverse structural and bioactive functions that play important roles in many key biological processes. Factors such as low relative abundance, varied structures, and a dynamic concentration range provide a difficult analytical challenge for sphingolipid detection. To further improve mass-spectrometry-based sphingolipid analysis, lithium adduct consolidation was implemented to decrease spectral complexity and combine signal intensities, leading to increased specificity and sensitivity. We report the use of lithium hydroxide as a base in a routine hydrolysis procedure in order to effectively remove common ionization suppressants (such as glycolipids and glycerophospholipids) and introduce a source of lithium into the sample. In conjunction, an optimized MALDI matrix system, featuring 2',4',6'-trihydroxyacetophenone (THAP) is used to facilitate lithium adduct consolidation during the MALDI process. The result is a robust and high-throughput sphingolipid detection scheme, particularly of low-abundance ceramides. Application of our developed workflow includes the detection of differentially expressed liver sphingolipid profiles from a high-fat-induced obesity mouse model. We also demonstrate the method's effectiveness in detecting various sphingolipids in brain and plasma matrices. These results were corroborated with data from UHPLC HR MS/MS and MALDI FT-ICR, verifying the efficacy of the method application. Overall, we demonstrate a high-throughput workflow for sphingolipid analysis in various biological matrices by the use of MALDI TOF and lithium adduct consolidation.

Flash-comet: Significantly improved speed and sensitivity of the comet assay through the introduction of lithium-based solutions and a more gentle lysis.

Evaluation of primary DNA-damage is one way to identify potential genotoxic agents and for this purpose the Comet assay has, for the last decades, been used to monitor DNA single strand and double strand breaks in individual cells. Various attempts have been made to modify the different steps in the in vitro protocol for the Comet assay in order to improve its sensitivity. However, to the best of our knowledge, nobody has tried to replace the traditionally used NaOH-based electrophoresis solution (pH > 13), with another type of solution. In the present paper, using TK-6 cells exposed to different concentrations of H2O2 or ionizing radiation, we present evidence clearly showing that a low-conductive LiOH-based electrophoresis solution at pH 12.5, and a more gentle lysis procedure, significantly improved both the speed and sensitivity of the assay. The new approach, which we call the Flash-comet, is based on a lysis buffer at pH 8.5, an unwinding time of 2.5 min in a LiOH solution without EDTA at pH 12.5, and an electrophoresis time of 1 min at 150 V (5 V/cm) using the same solution.

Towards Thermally Reversible Networks Based on Furan-Functionalization of Jatropha Oil.

A novel biobased monomer for the preparation of thermally reversible networks based on the Diels-Alder reaction was synthesized from jatropha oil. The oil was epoxidized and subsequently reacted with furfurylamine to attach furan groups via an epoxide ring opening reaction. However, furfurylamine also reacted with the ester groups of the triglycerides via aminolysis, thus resulting in short-chain molecules that ultimately yielded brittle thermally reversible polymers upon cross-linking via a Diels-Alder reaction. A full-factorial experimental design was used in finding the optimum conditions to minimize ester aminolysis and to maximize the epoxide ring opening reaction as well as the number of furans attached to the modified oil. The optimum conditions were determined experimentally and were found to be 80 °C, 24 h, 1:1 molar ratio, with 50 mol % of LiBr with respect to the modified oil, resulting in 35% of ester conversion, 99% of epoxide conversion, and an average of 1.32 furans/triglyceride. Ultimately, further optimization by a statistical approach led to an average of 2.19 furans per triglyceride, which eventually yielded a flexible network upon cross-linking via a Diels-Alder reaction instead of the brittle one obtained when the furan-functionalization reaction was not optimized.

Cytotoxicity of Exogenous Acetoacetate in Lithium Salt Form Is Mediated by Lithium and Not Acetoacetate.

BACKGROUND/AIM: The ketogenic diet has recently gained interest as potential adjuvant therapy for cancer. Many researchers have endeavored to support this claim in vitro. One common model utilizes treatment with exogenous acetoacetate in lithium salt form (LiAcAc). We aimed to determine whether the effects of treatment with LiAcAc on cell viability, as reported in the literature, accurately reflect the influence of acetoacetate. MATERIALS AND METHODS: Breast cancer and normal cell lines were treated with acetoacetate, in lithium and sodium salt forms, and cell viability was assessed. RESULTS: The effect of LiAcAc on cells was mediated by Li ions. Our results showed that the cytotoxic effects of LiAcAc treatment were significantly similar to those caused by LiCl, and also treatment with NaAcAc did not cause any significant cytotoxic effect. CONCLUSION: Treatment of cells with LiAcAc is not a convincing in vitro model for studying ketogenic diet. These findings are highly important for interpreting previously published results, and for designing new experiments to study the ketogenic diet in vitro.

Development of a Biocompatible Solid Phase Microextraction Thin Film Coating for the Sampling and Enrichment of Peptides.

While currently available methods for peptide sample preparation are mostly suitable for ex situ analysis via exhaustive extraction techniques, these techniques do not allow for in situ extraction of peptides from biological samples, such as blood or plasma collected from patients for routine clinical applications. Biocompatible solid phase microextraction (Bio-SPME) has shown great potential in metabolomics for in situ extraction of metabolites including labile compounds from biological matrices in a biocompatible and non-exhaustive fashion, thus facilitating even in vivo sampling. However, the amounts of peptides extracted by such Bio-SPME chemical biopsy tools are deemed too low for quantification when porous polyacrylonitrile (PAN)-based biocompatible thin film sorbent coatings are used, since such materials have been commonly applied as means to restrict access of high molecular weight compounds such as proteins. Aiming to improve peptide extraction by the SPME sorbent while still preventing protein adsorption, thin films with nanoscale irregularities and mesopores were prepared by inclusion of the porogen lithium perchlorate in the slurries of the coatings. The novel thin film coating method significantly improved extraction of a range of angiotensins known to possess important roles in blood pressure regulation and electrolyte balance. Model low abundance peptides covering a wide range of hydrophobicities were successfully extracted from physiological buffers and human plasma using the increased porosity coating, while the SPME protocol on the tryptic digestion of a protein supported that enzymes were excluded during peptide extraction. Surface rheological analysis, which displayed mesopores on the C18/PAN coatings, confirmed that the porosity of the coating facilitated the mass transport of peptides through the PAN layer, thus enabling extraction of high amounts of peptides by the new C18/PAN coating.

Dissolution mechanism of sodium alginate and properties of its regenerated fiber under low temperature.

Sodium alginate (SA) solution with high quality fraction was prepared by NaOH/urea, NaOH/thiourea/urea, NaOH/thiourea and LiOH/urea at low temperature. The results showed that we got 5.5 wt% SA solution by using 5.5 wt% LiOH/20 wt% urea. The viscosity of the solution was 62.44 Pa·s, which had declined by 64% compared to that of 5 wt% SA solution (176.12 Pa·s). The difference from the traditional low temperature dissolution principle is that the urea is mainly wrapped on the SA surface by the interaction between the OH- in LiOH through the ether bond (O) and the π bond in the SA instead of the -OH in the SA. Only the crystallization peak of urea appeared in the XRD spectrum. It indicated that urea was successfully wrapped on the surface of SA to form urea-LiOH-SA inclusion complex. The 23Na NMR showed that the interaction between Na+ and other ions or molecules around it increased at low temperature. Breaking strength of regenerated CA was 2.44 cN/dtex, which rose by about 21.39% compared to that of CA fiber (2.01 cN/dtex). The "groove" on the surface of regenerated fiber is denser and the section is more loosely compared with those of CA fiber.