An investigation into the sensory properties of luffa (Luffa cylindrica (L.)) seeds and a comparison to other seeds (flax, sunflower, chia, and hemp).

Consumers are interested in new sustainable ingredients but are unwilling to accept undesirable sensory properties in their food products. Luffa (Luffa cylindrica) is mainly harvested and processed for its fibrous network, which is used as an exfoliator, while its seeds are usually discarded. However, the seeds have been found to have various nutritional benefits. As such, this study investigated the sensory properties of luffa seed powder added to yogurt and compared it to other seed powder (flax, sunflower, chia, and hemp). Consumers (n = 107) evaluated their liking of the different seeds added to yogurt using hedonic scales and the sensory properties using check-all-that-apply (CATA). The luffa seeds when mixed with yogurt were associated with off-colour, off-flavour, metallic, strong flavour, bitter, salty, earthy and decreased consumer liking. The flax and sunflower seeds were found to be sweet, nutty, cooked, mild flavour, and to have a smooth texture. The overall liking scores for the flax and sunflower seed samples were significantly higher than the luffa and hemp samples. Future studies should investigate different drying and roasting treatments to improve the sensory properties of the luffa seeds.

Enhancing small-scale acetification processes using adsorbed Acetobacter pasteurianus UMCC 2951 on κ-carrageenan-coated luffa sponge.

Background: This study explored the utilization of luffa sponge (LS) in enhancing acetification processes. LS is known for having high porosity and specific surface area, and can provide a novel means of supporting the growth of acetic acid bacteria (AAB) to improve biomass yield and acetification rate, and thereby promote more efficient and sustainable vinegar production. Moreover, the promising potential of LS and luffa sponge coated with κ-carrageenan (LSK) means they may represent effective alternatives for the co-production of industrially valuable bioproducts, for example bacterial cellulose (BC) and acetic acid. Methods: LS and LSK were employed as adsorbents for Acetobacter pasteurianus UMCC 2951 in a submerged semi-continuous acetification process. Experiments were conducted under reciprocal shaking at 1 Hz and a temperature of 32 °C. The performance of the two systems (LS-AAB and LSK-AAB respectively) was evaluated based on cell dry weight (CDW), acetification rate, and BC biofilm formation. Results: The use of LS significantly increased the biomass yield during acetification, achieving a CDW of 3.34 mg/L versus the 0.91 mg/L obtained with planktonic cells. Coating LS with κ-carrageenan further enhanced yield, with a CDW of 4.45 mg/L. Acetification rates were also higher in the LSK-AAB system, reaching 3.33 ± 0.05 g/L d as opposed to 2.45 ± 0.05 g/L d for LS-AAB and 1.13 ± 0.05 g/L d for planktonic cells. Additionally, BC biofilm formation during the second operational cycle was more pronounced in the LSK-AAB system (37.0 ± 3.0 mg/L, as opposed to 25.0 ± 2.0 mg/L in LS-AAB). Conclusions: This study demonstrates that LS significantly improves the efficiency of the acetification process, particularly when enhanced with κ-carrageenan. The increased biomass yield, accelerated acetification, and enhanced BC biofilm formation highlight the potential of the LS-AAB system, and especially the LSK-AAB variant, in sustainable and effective vinegar production. These systems offer a promising approach for small-scale, semi-continuous acetification processes that aligns with eco-friendly practices and caters to specialized market needs. Finally, this innovative method facilitates the dual production of acetic acid and bacterial cellulose, with potential applications in biotechnological fields.

Complete genome sequence of a novel amalgavirus in sponge gourd, Luffa cylindrica.

A novel monopartite dsRNA virus, tentatively named "sponge gourd amalgavirus 1" (SGAV1), was discovered by high-throughput sequencing in sponge gourd (Luffa cylindrica) displaying mosaic symptoms in Jiashan County, Zhejiang Province, China. The genome of SGAV1 is 3,447 nucleotides in length and contains partially overlapping open reading frames (ORFs) encoding a putative replication factory matrix-like protein and a fusion protein, respectively. The fusion protein of SGAV1 shares 57.07% identity with the homologous protein of salvia miltiorrhiza amalgavirus 1 (accession no. DAZ91057.1). Phylogenetic analysis based on the RNA-dependent RNA polymerase (RdRp) protein suggests that SGAV1 belongs to the genus Amalgavirus of the family Amalgaviridae. Moreover, analysis of SGAV1-derived small interfering RNAs indicated that SGAV1 was actively replicating in the host plant. Semi-quantitative RT-PCR showed higher levels of SGAV1 expression in leaves than in flowers and fruits. This is the first report of a novel amalgavirus found in sponge gourd in China.

In vivo characterization of a luffa-based composite scaffold for subcutaneous implantation in rats.

Recent advancements in tissue engineering have witnessed luffa-derived scaffolds, exhibiting their exceptional potential in cellular proliferation, biocompatibility, appropriate interconnectivity, and biomechanical strength. In vivo studies involved implanting fabricated scaffolds subcutaneously in Wistar rats to evaluate their impact on the heart, liver, and kidneys. This approach provided a safe and minimally invasive means to evaluate scaffold compatibility with surrounding tissues. Male Wistar rats were categorized into four distinct groups, Group A, B, C, and D are referred to as 3% LC implanted scaffolds, 5% LC implanted scaffolds, control (without luffa scaffolds), and Sham (without any scaffold implantation), respectively. Histological analysis in all the groups indicated that the animal models did not exhibit any signs of inflammation or toxicity, suggesting favorable tissue response to the implanted scaffolds. Initial observations revealed elevated levels of enzymes and biomarkers in the experimental groups after a 24 h interval, including aspartate aminotransferase (AST), alanine aminotransferase (ALT), alkaline phosphatase (ALP), bilirubin, creatine kinase-MB (CK-MB), and serum creatinine. However, these parameters normalized 3 weeks post-implantation, with no significant increase compared to the control groups, suggesting that the implanted luffa-based scaffolds did not induce adverse effects on the heart, liver, and kidneys. Furthermore, the scaffold's significant pore size and porosity enable it to release drugs, including antibacterial medications. This study demonstrates promising results, indicating excellent scaffold porosity, sustained drug release, affirming the in vivo biocompatibility, absence of inflammatory responses, and overall tissue compatibility highlighting the immense potential of these luffa-based scaffolds in various tissue engineering and regenerative medicine applications.

An investigation into the sensory properties of luffa [Luffa cylindrica (L.)] sap.

The seeds and sap of luffa [Luffa cylindrica (L.)] are usually discarded as waste. As such, this study aimed to identify the sensory properties of luffa sap (aqueous solution) and if it can be incorporated into a food item (orange juice) for added nutritional benefits and as an alternative sweetener. A sensory trial (n = 94) asked participants to evaluate a luffa sap sample and five different orange juice samples with increasing amounts of luffa sap (control [0%], 5%, 7.5%, 10%, 12.5%). The participants evaluated the samples using 9-point hedonic scales, check-all-that-apply, and an open-ended comment question. The luffa sap was described as having a mild flavor as well as woody, earthy, and floral attributes and an aftertaste. The liking scores for the orange juice with the 5% luffa sap did not significantly differ from the control. However, as the amount of luffa sap increased above 5%, the liking scores decreased and were significantly different from the control. The orange juice with luffa sap samples (7.5% and above) was associated with off-flavors, while the orange juice with 5% luffa sap and the control were associated with the attributes (sweet, fruity, orange, tropical, citrus) that increased the participants liking. Future studies should continue to investigate the sensory properties of luffa sap and its incorporation into different food products. PRACTICAL APPLICATION: This is one of the first studies to investigate the sensory properties of luffa sap with participants residing in the Western world. The luffa sap was found to be woody, earthy, bitter, and floral. It was acceptable to add luffa sap to orange juice up to 5% by volume. However, it did not increase the sweetness perception of the orange juice. At a 7.5% luffa sap addition and higher levels, off-flavors were observed in the orange juice.

Microorganisms immobilized hydroxyethyl cellulose/luffa composite sponge for selective adsorption and biodegradation of oils in wastewater.

The highly efficient removal of oils such as oils or dyes from wastewater has aroused wide concern and is of great significance for clean production and environmental remediation. The synthesis of a novel aerogel (designated as HEC/LS) is reported herein, achieved through a sol-gel method followed by freeze-drying utilizing loofa and hydroxyethyl cellulose as the raw materials. The new HEC/LS aerogel exhibits excellent porosity and specific surface area, with a porosity of 88.70 %, a total pore area of 0.607 m2 g-1, and a specific surface area of 230 m2 g-1. The prepared HEC/LS aerogel exhibits exceptional hydrophilicity and self-floatability, facilitating its rapid absorption of water up to 21 times its own weight within a mere 3 s. Additionally, it demonstrates good adsorption performance for methylene blue (MB), with a maximum adsorption capacity of 83.30 mg g-1. Subsequently, a new hydrophobic microorganisms-loaded composite aerogel (namely, Bn-HEC/LS) was obtained by doping microorganisms into the as-prepared HEC/LS in multiple enrichment followed by a hydrophobic and oleophilic surface modification. Based on its rich porous structure and oleophilic wettability, the as-synthesized Bn-HEC/LS exhibits excellent selective adsorption and degradation properties for the oil contamination, the diesel oil could be selectively absorbed in the Bn-HEC/LS and degraded by the loaded microorganisms. Among them, B5-HEC/LS displays the highest removal efficiency of 94.50 % within 180 h, while free microorganisms and HEC/LS aerogels show degradation efficiencies of only 21.70 % and 48.10 %, respectively. The fixation of microorganisms in the aerogel increases their number within the material and enhances the relative microorganisms removal capacity. The hydrophobic and lipophilic modifications improve the selective adsorption performance of the aerogel on diesel oil, resulting in a significantly high removal rate of Bn-HEC/LS for diesel oil. The results indicate that the immobilization of microorganisms into aerogel improves the activity of microorganisms, and the hydrophobic and oleophilic modification enhances the selective adsorption performance of aerogel to diesel oil, thus resulting in a very high removal rate of Bn-HEC/LS for diesel oil. This study is expected to provide a now possibility for the green and efficient bioremediation of oils.

Assembly and comparative analysis of the complete mitochondrial genome of white towel gourd (Luffa cylindrica).

Mitochondria play an important role in the energy production of plant cells through independent genetic systems. This study has aimed to assemble and annotate the functions of the mitochondrial (mt) genome of Luffa cylindrica. The mt genome of L. cylindrica contained two chromosomes with lengths of 380,879 bp and 67,982 bp, respectively. Seventy-seven genes including 39 protein-coding genes, 34 tRNA genes, 3 rRNA genes, and 1 pseudogene, were identified. About 90.63% of the codons ended with A or U bases, and 98.63% of monomers contained A/T, which contributed to the high A/T content (55.91%) of the complete mt genome. Six genes (ATP8, CCMFC, NAD4, RPL10, RPL5 and RPS4) showed positive selection. Phylogenetic analysis indicates that L. cylindrica is closely related to L. acutangula. The present results provide the mt genome of L. cylindrica, which may facilitate possible genetic variation, evolutionary, and molecular breeding studies of L. cylindrica.

Removal of Azo Dyes from Water Using Natural Luffa cylindrica as a Non-Conventional Adsorbent.

Reducing high concentrations of pollutants such as heavy metals, pesticides, drugs, and dyes from water is an emerging necessity. We evaluated the use of Luffa cylindrica (Lc) as a natural non-conventional adsorbent to remove azo dye mixture (ADM) from water. The capacity of Lc at three different doses (2.5, 5.0, and 10.0 g/L) was evaluated using three concentrations of azo dyes (0.125, 0.250, and 0.500 g/L). The removal percent (R%), maximum adsorption capacity (Qm), isotherm and kinetics adsorption models, and pH influence were evaluated, and Fourier-transform infrared spectroscopy and scanning electron microscopy were performed. The maximum R% was 70.8% for 10.0 g L-1Lc and 0.125 g L-1 ADM. The Qm of Lc was 161.29 mg g-1. Adsorption by Lc obeys a Langmuir isotherm and occurs through the pseudo-second-order kinetic model. Statistical analysis showed that the adsorbent dose, the azo dye concentration, and contact time significantly influenced R% and the adsorption capacity. These findings indicate that Lc could be used as a natural non-conventional adsorbent to reduce ADM in water, and it has a potential application in the pretreatment of wastewaters.

Analyzing genetic diversity in luffa and developing a Fusarium wilt-susceptible linked SNP marker through a single plant genome-wide association (sp-GWAS) study.

BACKGROUND: Luffa (Luffa spp.) is an economically important crop of the Cucurbitaceae family, commonly known as sponge gourd or vegetable gourd. It is an annual cross-pollinated crop primarily found in the subtropical and tropical regions of Asia, Australia, Africa, and the Americas. Luffa serves not only as a vegetable but also exhibits medicinal properties, including anti-inflammatory, antidiabetic, and anticancer effects. Moreover, the fiber derived from luffa finds extensive applications in various fields such as biotechnology and construction. However, luffa Fusarium wilt poses a severe threat to its production, and existing control methods have proven ineffective in terms of cost-effectiveness and environmental considerations. Therefore, there is an urgent need to develop luffa varieties resistant to Fusarium wilt. Single-plant GWAS (sp-GWAS) has been demonstrated as a promising tool for the rapid and efficient identification of quantitative trait loci (QTLs) associated with target traits, as well as closely linked molecular markers. RESULTS: In this study, a collection of 97 individuals from 73 luffa accessions including two major luffa species underwent single-plant GWAS to investigate luffa Fusarium wilt resistance. Utilizing the double digest restriction site associated DNA (ddRAD) method, a total of 8,919 high-quality single nucleotide polymorphisms (SNPs) were identified. The analysis revealed the potential for Fusarium wilt resistance in accessions from both luffa species. There are 6 QTLs identified from 3 traits, including the area under the disease progress curve (AUDPC), a putative disease-resistant QTL, was identified on the second chromosome of luffa. Within the region of linkage disequilibrium, a candidate gene homologous to LOC111009722, which encodes peroxidase 40 and is associated with disease resistance in Cucumis melo, was identified. Furthermore, to validate the applicability of the marker associated with resistance from sp-GWAS, an additional set of 21 individual luffa plants were tested, exhibiting 93.75% accuracy in detecting susceptible of luffa species L. aegyptiaca Mill. CONCLUSION: In summary, these findings give a hint of genome position that may contribute to luffa wild resistance to Fusarium and can be utilized in the future luffa wilt resistant breeding programs aimed at developing wilt-resistant varieties by using the susceptible-linked SNP marker.

Loofah sponge crosslinked polyethyleneimine loaded with biochar biofilm reactor for ecological remediation of oligotrophic water: Mechanism, performance, and functional characterization.

The removal of complex pollutants from oligotrophic water is an important challenge for researchers. In this study, the HCl-modified loofah sponge crosslinked polyethyleneimine loaded with biochar (LS/PEI@biochar) biofilm reactor was adapted to achieve efficient removal of complex pollutants in oligotrophic water. On the 35 d, the average removal efficiency of chemical oxygen demand (COD), ammonia nitrogen (NH4+-N), calcium (Ca2+), and phosphate (PO43--P) in water was 51, 95, 81, and 77 %, respectively. Additionally, it effectively used a low molecular weight carbon source. Scanning electron microscopy (SEM) results showed that the LS/PEI@biochar biocarrier had superior biofilm suspension performance. Meanwhile, analysis of the biocrystals confirmed Ca2+ and PO43- removal through the generation of CaCO3 (calcite and vaterite) and Ca5(PO4)3OH. This study demonstrated that the system has great efficiency and application prospect in treating oligotrophic water on the laboratory scale, and will be further validated for practical application on large-scale oligotrophic water.

Histopathology and quantification of green fluorescent protein-tagged Fusarium oxysporum f. sp. luffae isolate in resistant and susceptible Luffa germplasm.

Fusarium oxysporum f. sp. luffae (Folu) is a severe plant pathogen that causes vascular wilt and root rot in Luffa plants worldwide. A green fluorescent protein (GFP)-tagged isolate of Folu (Fomh16-GFP) was utilized to investigate the infection progress and colonization of Fomh16-GFP in resistant (LA140) and susceptible (LA100) Luffa genotypes. Seven days post-inoculation (dpi), it was observed that Fomh16-GFP had successfully invaded and colonized the vascular bundle of all LA100 parts, including the roots, hypocotyl, and stem. Pathogen colonization continued to increase over time, leading to the complete wilting of plants by 14-17 dpi. In LA140, the Fomh16-GFP isolate colonized the roots and hypocotyl vascular system at 7 dpi. Nevertheless, this colonization was restricted in the hypocotyl and decreased significantly, and no fungal growth was detected in the vascular system at 21 dpi. Thus, the resistant genotype might trigger a robust defense mechanism. In addition, while the pathogen was present in LA140, the inoculated plants did not exhibit any symptoms until 28 dpi. Quantitative PCR was utilized to measure the Fomh16-GFP biomass in various parts of LA100 and LA140 at different time points. The findings indicated a positive correlation between the quantity of Fomh16-GFP DNA and disease development in LA100. Alternatively, a high amount of Fomh16-GFP DNA was identified in the roots of LA140. Nonetheless, no significant correlations were found between DNA amount and disease progression in LA140. Aqueous extracts from LA140 significantly reduced Fomh16-GFP spore germination, while no significant reduction was detected using LA100 extracts.IMPORTANCEFusarium wilt of Luffa, caused by Fusarium oxysporum f. sp. luffae (Folu), causes great losses in Luffa plants worldwide. This study used a green fluorescent protein (GFP)-tagged isolate of Folu (Fomh16-GFP) to investigate the infection progress and colonization dynamics of Fomh16-GFP in the resistant and susceptible Luffa genotypes, which could be important in understanding the resistance mechanism of Folu in Luffa plants. In addition, our work highlights the correlations between DNA amount and disease progression in resistant plants using real-time PCR. We observed a positive correlation between the quantity of Fomh16-GFP DNA and disease progression in LA100, while no significant correlation was found in LA140. These results could be valuable to further investigate the resistance mechanism of Luffa genotypes against Folu. Gaining a better understanding of the interaction between Folu and Luffa plants is crucial for effectively managing Fusarium wilt and enhancing resistance in Luffa rootstock and its varieties.

Carboxymethyl cellulose-based hydrogel with high-density crack microstructures inspired from the multi-tentacles of octopus for ultrasensitive flexible sensing microsystem.

Constructing high-density contact-separation sites on conductive materials highly determines the sensitivity of flexible resistance-type sensors relying on the crack microstructures. Herein, inspired from the multiple-tentacle structures on octopus, we demonstrated a sort of novel carbonized ZIF-8@loofah (CZL) as conductive material to develop ultrasensitivity flexible sensor, in which the carbonized ZIF-8 nanoparticles (~100 nm) served as tentacles. Originating from the formation of high-density contact-separation sites, the fabricated CZL-based strain sensor delivered ultrahigh sensitivity of GFmax = 15,901, short response time of 22 ms and excellent durability over 10,000 cycles. These features enable the sensor with efficient monitoring capacity for complex human activities, such as pulse rate and phonation. Moreover, when CZL was assembled into triboelectric nanogenerator (TENG), CZL-based TENG can effectively convert the irregular biomechanical energy into electric energy, providing sustainable power supply for the continuous operation of the sensing micro-system. Our findings established a novel platform to develop high-performance self-powered sensing systems of physiological parameter of human inspired from the nature.

Life table parameters and digestive physiology of Aulacophora lewisii Baly (Coleoptera: Chrysomelidae) on three Luffa acutangula (L.) Roxb. (Cucurbitaceae) cultivars.

Aulacophora lewisii Baly (Coleoptera: Chrysomelidae) is an important pest of Luffa acutangula (L.) Roxb. (Cucurbitaceae) in India. Larvae of A. lewisii feed on the roots, while adults consume leaves of L. acutangula. In the current study, effects of three L. acutangula cultivars (Abhiskar, Debsundari, and Jaipur Long) on the life table parameters by age-stage, two-sex approach, and key digestive enzymatic activities (amylolytic, proteolytic, and lipolytic) of the larvae and adults of A. lewisii were determined. Further, nutrients (total carbohydrates, proteins, lipids, amino acids, and nitrogen content) and antinutrients (total phenols, flavonols, and tannins) present in the roots and leaves of three cultivars were estimated. The development time (egg to adult emergence) was fastest and slowest on Jaipur Long (31.80 days) and Abhiskar (40.91 days), respectively. Fecundity was highest and lowest on Jaipur Long (279.91 eggs) and Abhiskar (137.18 eggs), respectively. The intrinsic rate of increase (r) was lowest on Abhiskar (0.0511 day-1) and highest on Jaipur Long (0.0872 day-1). The net reproductive rate (R0) was lowest on Abhiskar (23.32 offspring female-1). The mean generation time (T) was shortest on Jaipur Long (52.59 days) and longest on Abhiskar (61.58 days). The amylolytic, proteolytic, and lipolytic activities of larvae and adults of A. lewisii were highest and lowest on Jaipur Long and Abhiskar, respectively. The lower level of nutrients and higher level of antinutrients influenced higher larval development time and lower fecundity of A. lewisii on Abhiskar than other cultivars. Our results suggest that Abhiskar cultivar could be promoted for cultivation.

Protective effect of Luffa cylindrica fermentation liquid on cyclophosphamide-induced premature ovarian failure in female mice by attenuating oxidative stress, inflammation and apoptosis.

Premature ovarian failure (POF) is a leading cause of women's infertility without effective treatment. The purpose of this study was to investigate the protective effects of Luffa cylindrica fermentation liquid (LF) on cyclophosphamide (CTX) -induced POF in mice and to preliminarily investigate the underlying mechanisms. Thirty-two Balb/c mice were divided into four groups randomly. One group served as the control, while the other three received CTX injections to establish POF models. A 14-day gavage of either 5 or 10 µL/g LF was administered to two LF pretreatment groups. To analyze the effects of LF, the ovarian index, follicle number, the levels of serum sex hormones, superoxide dismutase (SOD), glutathione (GSH), malondialdehyde (MDA), inflammatory factors, and apoptosis of the ovarian cells were measured. The effects of LF pretreatment on the expression of TLR4/NF-κB and apoptosis pathways were also evaluated. We found that LF pretreatment increased the ovarian index and the number of primordial and antral follicles while decreasing those of atretic follicles. LF pretreatment also increased the serum levels of estradiol (E2) and anti-Müllerian hormone (AMH), while decreasing those of luteinizing hormone (LH) and follicle-stimulating hormone (FSH). Furthermore, LF pretreatment increased the levels of SOD and GSH in the ovaries, while decreasing those of MDA, tumor necrosis factor-α (TNF-α) and interleukin-1ß (IL-1ß). LF administration reduced the amount of TUNEL+ ovarian cells and the levels of TLR4 and NF-κB P65 protein expression. In conclusion, LF has antioxidant, anti-inflammatory as well as anti-apoptotic effects against CTX-induced POF, and the inhibition of TLR4/NF-κB and apoptosis pathways may be involved in its mechanisms.

Efficacious adsorption of divalent nickel ions over sodium alginate-g-poly(acrylamide)/hydrolyzed Luffa cylindrica-CoFe2O4 bionanocomposite hydrogel.

Existing Ni2+ heavy metal ions in an aqueous medium are highly hazardous for living organisms and humans. Therefore, designing low-cost adsorbents with enhanced effectiveness is essential for removing nickel ions to safeguard public health. In this study, a novel green nanocomposite hydrogel was synthesized through the free radical solution and bulk polymerization method, and its capability to remove divalent nickel ions from aqueous media was examined. The bionanocomposite hydrogel named as SA-g-poly(AAm)/HL-CoFe2O4 was produced by grafting polyacrylamide (AAm) onto sodium alginate (SA) in the presence of a magnetic composite recognized as HL-CoFe2O4, where HL represents hydrolyzed Luffa Cylindrica. By employing FT-IR, XRD, VSM, SEM, EDX-Map, BET, DLS, HPLC, and TGA techniques, morphological evaluation and characterization of the adsorbents were carried out. The performance of the adsorption process was studied under varying operational conditions including pH, temperature, contact duration, initial concentration of pollutant ions, and adsorbent dosage. HPLC analysis proved the non-toxic structure of the bionanocomposite hydrogel. The number of unreacted acrylamide monomers within the hydrogel matrix was measured at 20.82 mg/kg. The optimum conditions was discovered to be pH = 6, room temperature, adsorbent dosage of 1 of g.L-1, initial Ni2+ concentration of 10 mg.L-1, and contact time of 100 min, and the maximum adsorption efficiency at optimal state was calculated as 70.09, 90.25, and 93.83 % for SA-g-poly (AAm), SA-g-poly(AAm)/HL, and SA-g-poly(AAm)/HL-CoFe2O4 samples, respectively. Langmuir isotherm model was in good agreement with the experimental data and the maximum adsorption capacity of SA-g-poly(AAm), SA-g-poly(AAm)/HL, and SA-g-poly(AAm)/HL-CoFe2O4 samples was calculated to be 31.37, 43.15, and 45.19 mg.g-1, respectively. The adsorption process, according to kinetic studies, follows a pseudo-second-order kinetic model. Investigations on thermodynamics also demonstrated that the process is exothermic and spontaneous. Exploring the interference effect of co-existing ions showed that the adsorption efficiency has decreased with concentration enhancement of Ca2+ and Na+ cations in aqueous medium. Furthermore, the adsorption/desorption assessments revealed that after 8 consecutive cycles, there had been no noticeable decline in the adsorption effectiveness. Finally, actual wastewater treatment outcomes demonstrated that the bionanocomposite hydrogel successfully removes heavy metal pollutants from shipbuilding industry effluent. Therefore, the findings revealed that the newly fabricated bionanocomposite hydrogel is an efficient, cost-effective, easy-separable, and green adsorbent that could be potentially utilized to remove divalent nickel ions from wastewater.

Protective effect of Luffa cylindrica Roemer against dexamethasone-induced muscle atrophy in primary rat skeletal muscle cells.

Glucocorticoids (GCs) are commonly used in the treatment of chronic inflammatory conditions. However, the administration of high doses and long-term use of GCs can induce muscle atrophy (MA) in patients, leading to a decline in quality of life and increased mortality. MA leads to protein degradation in skeletal muscle, resulting in a reduction of muscle mass. This process is triggered by GCs like dexamethasone (DEX), which induce the expression of E3 ubiquitin ligases, namely Atrogin-1 and muscle RING-finger protein-1 (MuRF1). In this study, we examined the anti-MA potential of Luffa cylindrica Roemer (LCR) on DEX-treated primary skeletal myotubes. Primary skeletal myotubes stimulated with LCR alone resulted in a significant upregulation of myotube development, characterized by an increase in both the number and diameter of myotubes. Contrastingly, combined treatment with LCR and DEX reduced the expression of Atrogin-1, while treatment with DEX alone induced the expression of MuRF1. Furthermore, LCR treatment successfully restored the number and diameter of myotubes that had been diminished by DEX treatment. These findings suggest that LCR holds potential for treating MA, as an accelerating effect on muscle development and anti-MA effects on primary skeletal muscle cells were observed.

Cucumber grafting on indigenous cucurbit landraces confers salt tolerance and improves fruit yield by enhancing morpho-physio-biochemical and ionic attributes.

Pakistan is the 8th most climate-affected country in the globe along with a semi-arid to arid climate, thereby the crops require higher irrigation from underground water. Moreover, ~ 70% of pumped groundwater in irrigated agriculture is brackish and a major cause of secondary salinization. Cucumber (Cucumis sativus L.) is an important vegetable crop with an annual growth rate of about 3.3% in Pakistan. However, it is a relatively salt-sensitive crop. Therefore, a dire need for an alternate environment-friendly technology like grafting for managing salinity stress in cucumber by utilizing the indigenous cucurbit landraces. In this regard, a non-perforated pot-based study was carried out in a lath house to explore indigenous cucurbit landraces; bottle gourd (Lagenaria siceraria) (cv. Faisalabad Round), pumpkin (Cucurbit pepo. L) (cv. Local Desi Special), sponge gourd (Luffa aegyptiaca) (cv. Local) and ridge gourd (Luffa acutangula) (cv. Desi Special) as rootstocks for inducing salinity tolerance in cucumber (cv. Yahla F1). Four different salts (NaCl) treatments; T0 Control (2.4 dSm-1), T1 (4 dSm-1), T2 (6 dSm-1) and T3 (8 dSm-1) were applied. The grafted cucumber plants were transplanted into the already-induced salinity pots (12-inch). Different morpho-physio-biochemical, antioxidants, ionic, and yield attributes were recorded. The results illustrate that increasing salinity negatively affected the growing cucumber plants. However, grafted cucumber plants showed higher salt tolerance relative to non-grafted ones. Indigenous bottle gourd landrace (cv. Faisalabad Round) exhibited higher salt tolerance compared to non-grafted cucumber plants due to higher up-regulation of morpho-physio-biochemical, ionic, and yield attributes that was also confirmed by principal component analysis (PCA). Shoot and root biomass, chlorophylls contents (a and b), activities of superoxide dismutase (SOD), catalase (CAT) and peroxidase (POX) enzymes, antioxidants scavenging activity (ASA), ionic (↑ K and Ca, ↓ Na), and yield-related attributes were found maximum in cucumber plants grafted onto indigenous bottle gourd landrace. Hence, the indigenous bottle gourd landrace 'cv. Faisalabad round' may be utilized as a rootstock for cucumber under a mild pot-based saline environment. However, indigenous bottle gourd landrace 'cv. Faisalabad round' may further be evaluated as rootstocks in moderate saline field conditions for possible developing hybrid rootstock and, subsequently, sustainable cucumber production.

Green biodegradable dielectric material made from PLA and electron beam irradiated luffa cylindrica fiber: devices for a sustainable future.

The growing prevalence of polymer-based plastics in the environment is an imminent risk to the natural world. As an immediate consequence of this, extensive research has been launched over the course of the past few decades in an effort to reduce the damage that manmade plastics cause to the natural environment. The current study attempts to explore the biodegradability of polylactic acid (PLA), a bio-compatible plastic, by incorporating small amount of electron beam irradiated natural fibers (2 to 10%) derived from luffa cylindrica (LC) at varying irradiation doses (0.5 Gy, 1 Gy, and 2 Gy). Natural fiber surface treatment using electron beam irradiation is effective and environmentally friendly. The biodegradation of composites was studied for 90 days in sand, soil, compost, brackish water, fresh water, salt water, and bacterial and fungal conditions. Maximum decomposition was observed in the composite sample (PLA/10% wt of LC fiber at 2.0 Gy) at 15.42% and 4.73% in bacterial and soil environments. X-ray diffraction (XRD) and Raman spectroscopy validated the fiber and PLAs crystallinity and molecular interaction. The derivative thermo-gravimetric curve (DTGA) showed that electron beam irradiation removed moisture, hemicelluloses, and lignin from hydrophilic fibers. The incorporation of LC fibers into the bio-composites resulted in an increase in the glass transition temperature (Tg), melting temperature (Tm), and crystallization temperature (Tc). Additionally, after LC fiber reinforcement, the composites' dielectric properties were enhanced.

Microalgal-based macro-hollow loofah fiber bio-composite for methylene blue removal: A promising step for a green adsorbent.

This study looked into how well the macro-hollow loofah fiber with and without the bio-attaching with green microalga (Chlamydomonas reinhardtii OR242521) was applied methylene blue elimination from water. Based on the results, the biosorption capacity of loofah sponge for methylene blue significantly increased with the increase of contact time, weight of microalgal biofilm, and methylene blue concentration. The maximum biosorption capacity was achieved after 120 min, after 0.042 mgg-1 biofilm weight, and MB concentration of 140 mgL-1. Furthermore, methylene blue's biosorption capacity was strongly affected by pH, reaching its maximum at pH 7. The biosorption capacity of the bio-attached loofah sponge was much higher than that of the loofah sponge, revealing that the microalgae bio-attachment enhanced the biosorption capacity of the loofah sponge. At the end of the MB biosorption process, the used bio-attached loofah sponge can still be utilized once more for the same purpose after the desorption of MB but with a lower biosorption capacity. Furthermore, the loofah sponge could also be applied as a bio-sorbent after domestic use. According to this study, the loofah sponge with or without algal biofilm attachment could be applied as a low-cost efficient bio-sorbent for methylene blue removal from water. However, the loofah sponge's ability for biosorption was dramatically increased by the bio-attachment of microalgae, making it a more potent bio-sorbent. Likewise, this study offers insights into the variables influencing the biosorption capacity of loofah sponges and bio-attached loofah sponges, which could be beneficial for enhancing the biosorption processes.