A study on volumetric change of mandibular condyles with osteoarthritis using cone-beam computed tomography.

This study aimed to quantitatively assess three-dimensional changes in the mandibular condyle with osteoarthritis using cone-beam computed tomography (CBCT). Pre- and post-treatment CBCT images of temporomandibular joints (TMJs) from 66 patients were used to assess longitudinal changes in condylar volume within individual patients using 3D slicer software. Total volume difference (dV), net increase (dV + , bone deposition), and net decrease (dV- , bone resorption) after treatment were analyzed based on clinical and radiological factors. Condyles with surface erosion at their first visit showed significantly decreased volume after treatment compared to condyles without erosion (p < 0.05). Amounts of bone resorption and deposition were higher in condyles with surface erosion (both p < 0.01). In patients with condylar erosion, the presence of joint pain was associated with a decrease in condylar volume and an increase in net resorption (both p < 0.01). When both joint pain and condylar erosion were present, patients with parafunctional habits showed reduced condylar volume after treatment (p < 0.05). Condylar volume change after treatment was negatively correlated with the duration of pain relief (R = - 0.501, p < 0.05). These results indicate that condylar erosion and TMJ pain could be significant variables affecting TMJ volume changes after treatment. Establishing appropriate treatment strategies is crucial for managing condylar erosion and TMJ pain.

Effect of stainless-steel wire internal fixation on intracapsular condylar fracture.

OBJECTIVES: The aim of the study was to investigate the clinical effect of stainless-steel wire fixation on the early mouth-opening movement of an intracapsular fracture involving the condylar process. MATERIALS AND METHODS: In this study, patients who underwent mandibular condylar intracapsular fracture surgery in our hospital from 2012 to 2020 were selected as research subjects. A total of 44 patients received steel wire internal fixation treatment, 32 patients received titanium plate-and-nail rigid internal fixation, and 28 patients underwent conservative non-surgical treatment. RESULTS: For the patients in the stainless-steel wire group, the degree of mouth opening reached normal levels of 3.7 cm approximately 10 days after surgery. The recovery time for the patients in the titanium plate-and-nail rigid internal-fixation group was 21 days, while the patients in the conservative treatment group needed 60 days to recover. CONCLUSION: The treatment of fixation with a stainless-steel wire for intracapsular condylar fracture reduced the time taken to perform mouth-opening exercises and improved the recovery rate of patients.

OBJETIVO: Explorar el efecto clínico de la fijación de alambre de acero inoxidable en el movimiento temprano de apertura de la boca en la fractura interna del cóndilo. MÉTODO: Este estudio seleccionó a pacientes que se sometieron a cirugía de fractura intracapsular de cóndilo en nuestro hospital de 2012 a 2020 como sujetos de investigación. Un total de 44 pacientes recibieron tratamiento de fijación interna de alambre de acero, 32 recibieron placa de titanio y fijación interna con clavos, y 28 recibieron tratamiento conservador no quirúrgico. RESULTADOS: En los pacientes del grupo de alambre de acero inoxidable, alrededor de 10 días después de la cirugía el grado de apertura de la boca alcanzó un valor normal de 3.7 cm. El tiempo de recuperación de los pacientes en el grupo de fijación interna con clavos y placa de titanio fue de 21 días, mientras que los pacientes en el grupo de tratamiento conservador tardaron 60 días en recuperarse. CONCLUSIONES: La fijación con alambre de acero inoxidable para el tratamiento de la fractura intracapsular del cóndilo acorta el tiempo hasta la apertura de la boca y mejora la tasa de recuperación de los pacientes.

[Fractures of the mandibular condyle]. / Fracturen van het collum mandibulae.

A fracture of the mandibular condyle is a common fracture of the mandible. After the diagnosis has been made, there are various treatment options: wait and see, conservative or surgical. Which of these treatment options is best depends on several different factors and is often the subject of debate. A common complication of a fracture of the mandibular condyle is malocclusion. Malocclusion can cause problems - even in the long term - for which the patient often requires secondary treatment.

Long-term haplodeficency of DSPP causes temporomandibular joint osteoarthritis in mice.

BACKGROUND: Extracellular matrix (ECM) protein malfunction or defect may lead to temporomandibular joint osteoarthritis (TMJ OA). Dentin sialophophoprotein (DSPP) is a mandibular condylar cartilage ECM protein, and its deletion impacted cell proliferation and other extracellular matrix alterations of postnatal condylar cartilage. However, it remains unclear if long-term loss of function of DSPP leads to TMJ OA. The study aimed to test the hypothesis that long-term haploinsufficiency of DSPP causes TMJ OA. MATERIALS AND METHODS: To determine whether Dspp+/- mice exhibit TMJ OA but no severe tooth defects, mandibles of wild-type (WT), Dspp+/-, and Dspp homozygous (Dspp-/-) mice were analyzed by Micro-computed tomography (micro-CT). To characterize the progression and possible mechanisms of osteoarthritic degeneration over time in Dspp+/- mice over time, condyles of Dspp+/- and WT mice were analyzed radiologically, histologically, and immunohistochemically. RESULTS: Micro-CT and histomorphometric analyses revealed that Dspp+/- and Dspp-/- mice had significantly lower subchondral bone mass, bone volume fraction, bone mineral density, and trabecular thickness compared to WT mice at 12 months. Interestingly, in contrast to Dspp-/- mice which exhibited tooth loss, Dspp+/- mice had minor tooth defects. RNA sequencing data showed that haplodeficency of DSPP affects the biological process of ossification and osteoclast differentiation. Additionally, histological analysis showed that Dspp+/- mice had condylar cartilage fissures, reduced cartilage thickness, decreased articular cell numbers and severe subchondral bone cavities, and with signs that were exaggerated with age. Radiographic data showed an increase in subchondral osteoporosis up to 18 months and osteophyte formation at 21 months. Moreover, Dspp+/- mice showed increased distribution of osteoclasts in the subchondral bone and increased expression of MMP2, IL-6, FN-1, and TLR4 in the mandibular condylar cartilage. CONCLUSIONS: Dspp+/- mice exhibit TMJ OA in a time-dependent manner, with lesions in the mandibular condyle attributed to hypomineralization of subchondral bone and breakdown of the mandibular condylar cartilage, accompanied by upregulation of inflammatory markers.

Facial Asymmetry Caused by Mandibular Condylar Hyperplasia: A Two Center Study.

BACKGROUND: Condylar hyperplasia is a non-neoplastic overgrowth of the mandibular condyle. The disorder is progressive and causes gradual jaw deviation, facial asymmetry, and dental malocclusion. The only treatment capable of stopping hyperplastic growth is surgical condylectomy to remove the upper portion of the condyle containing the deranged growth center. When this procedure is conducted in proportion to the length of the healthy side it may also correct the jaw deviation and facial asymmetry. OBJECTIVES: To assess the degree to which condylectomy corrects the asymmetry and to determine the proportion of patients after condylectomy who were satisfied with the esthetic result and did not desire further corrective surgery. METHODS: We conducted a retrospective analysis of medical records of patients who underwent condylectomy that was not followed by corrective orthognathic surgery for at least 1 year to determine the degree of correction of chin deviation and lip cant. Patient satisfaction from treatment or desire and undergo further corrective surgery was reported. RESULTS: Chin deviation decreased after condylectomy from a mean of 4.8° to a mean of 1.8° (P < 0.001). Lip cant decreased after condylectomy from a mean of 3.5° to a mean of 1.5° (P < 0.001). Most patients (72%) were satisfied with the results and did not consider further corrective orthognathic surgery. CONCLUSIONS: Proportional condylectomy could be a viable treatment to both arrest the condylar overgrowth and achieve some correction of the facial asymmetry.

Comparison of temporomandibular joints in relation to ages and vertical facial types in skeletal class II female patients: a multiple-cross-sectional study.

BACKGROUND: The temporomandibular joint (TMJ) is closely related to the dynamic balance and stability of mandibular function and orthodontic treatment. Skeletal class II female patients are thought to be at high risk for TMJ disease. The relationship between the TMJ and craniofacial structures is still controversial. This study compared the morphology and position of the TMJ in skeletal class II adolescents and adults with various vertical facial types using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: A total of 117 skeletal class II patients were divided into three groups according to the FH-GoGn angle (hypodivergent, normodivergent and hyperdivergent), with 40 class I normodivergent patients serving as controls. Each group contained two age subgroups (adolescents: 11-14 years old, adults: 18-35 years old). The size (condylar length, height, long and short axis diameter, glenoid fossa width and depth) and shape (condylar neck inclination, condylar head angle and long axis angle, articular eminence inclination) of the condyle and fossa, joint space (anterior, superior, posterior, mesial and lateral), and position of the fossa (vertical, transverse, and anteroposterior distance) and condyle were measured and compared using CBCT. RESULTS: Class II hypodivergent patients exhibited the greatest condylar length, height, and long- and short-axis diameter; steepest articular eminence; deepest fossa depth; largest superior, mesial and lateral joint spaces; and highest fossa position in both age groups. The manifestations of class II hyperdivergent patients were mostly the opposite. In adults, except for the condylar long axis angle, the measurements of the condyle increased differently among skeletal patterns, while the measurements of the fossa decreased, as the joint spaces and fossa position remained approximately stable compared with those in adolescents. CONCLUSION: The vertical skeletal pattern, rather than the class II sagittal skeletal pattern, may be the main factor affecting the morphology and position of the TMJ. Attention should be given to the TMJ area in hyperdivergent patients with a relatively poor-fit condyle-fossa relationship. The changes in the TMJ with age were mainly morphological rather than positional and varied with skeletal pattern.

Effect of the application of digital technology-assisted optimization in the process of adjusting jaw position.

OBJECTIVES: The aim of this study was to demonstrate a novel jaw position adjustment technique derived from digital twins and evaluate the application effect of digital technology-assisted optimization in the process of adjusting jaw position on patients with temporomandibular disorders (TMD). METHODS: A total of 74 patients with TMD who attended the Department of Temporomandibular Joint, West China Hospital of Stomatology, Si-chuan University, between June 2022 and May 2023 were selected. The patient's initial computed tomography (CT) and bilateral temporomandibular joint data obtained by magnetic resonance imaging (MRI) were collected. The 148 joints were divided into the normal disc-condyle relationship (N) group, disc displacement with reduction (DDWR) group, and disc displacement without reduction (DDWoR) group. Assisted by digital technology, the patient's CT data were reconstructed, and a personalized reference plane was established to adjust the jaw position. A three-point bite guiding splint was designed by the adjusted occlusal space and then fabricated by 3D printing technology. It was worn by the patients and then reviewed by MRI. Before and after the adjustment of jaw position, the amount and direction of condyle and disc displacement and the angle between condyle and disc were measured as the evaluation indexes of the effect of the adjustment. The correlation with condylar displacement was evaluated. RESULTS: In the N group, the disc moved backward and downward along the X and Z axes by (-0.60±0.62) and (0.51±0.71) mm, respectively. In the DDWR group, the disc moved backward and upward along the X and Z axes by (-1.33±1.38) and (-0.09±1.31) mm, respectively. In the DDWoR group, the disc moved forward and downward along the X and Z axes by (0.49±1.76) and (1.35±1.76) mm, respectively. The angle between the condyle and the disc decreased after adjustment of the jaw position in all three groups. All patients showed improvement in symptoms after adjustment. CONCLUSIONS: Digital technology-assisted jaw position adjustment can simplify the process, reduce the sensitivity of the technique, and improve patients' disc-condyle structure and symptoms. Therefore, its application in the treatment of patients with TMD is of great clinical significance.

A single-centre retrospective 10-year experience of the rhombic 3D condylar fracture plate for open reduction and internal fixation of condylar neck and base fractures.

Fractures of the mandibular condyle account for a significant proportion of mandibular fractures. The specific functional loads require particular specifications for the implant design used for open reduction and internal fixation of such fractures. The clinical and radiographic outcomes in patients treated using a single rhombic 3D condylar fracture plate for open reduction and internal fixation at a single institution, and who fulfilled the inclusion and exclusion criteria, are presented. The primary outcome variables were: occlusion, maximum interincisal distance and mandibular excursion at 1, 3, and 6 months postoperatively, and radiographic measurements for mandibular height and gonion angle. In total, 263 patients were included, of whom 173 (65.8%) were male and 90 (34.2%) female. The mean age was 40.4 ± 18.9 years. There was satisfactory occlusion in 98.9% of patients at the 6-month follow-up, and a significant improvement in all parameters for mandibular excursion (p < 0.001), with a reduced ramus height and an increase in the gonion angle on the fractured side. Excellent clinical and radiographic results were achieved using the rhombic-shaped implant, deeming it appropriate for the osteosynthesis of mandibular condyle fractures.

Abordagem cirúrgica em fratura de sínfise e côndilo mandibular bilateral em paciente pediátrico: um relato de caso / Surgical approach for syphysis and bilateral mandibular condyle fracture in a pediatric patient: a case report

As indicações de tratamento das fraturas mandibulares em paciente pediátrico variam em conservador, fixação não rígida e interna rígida. Alterações no crescimento ósseo, disfunções na articulação temporomandibular e assimetrias faciais podem ser decorrentes ao insucesso do tratamento. O objetivo deste trabalho consiste em relatar abordagem cirúrgica em fratura de sínfise e côndilo mandibular bilateral em paciente pediátrico. Paciente gênero feminino, 09 anos de idade, foi encaminhada ao Hospital Geral do Estado - Bahia vítima de queda de nível, cursando com trauma em face. Apresentou queixa principal, referida pela progenitora, de dificuldades em fechar a boca. Ao exame físico, a paciente apresentou mobilidade atípica à manipulação da mandíbula, mordida aberta anterior, equimose sublingual, ausência das unidades dentárias 74 e 75, com abertura bucal regular e suturas em posição em região de mento. Ao exame de imagem de tomografia computadorizada da face, pôde-se notar sinais sugestivos de fratura em região de sínfise e côndilos mandibulares bilateral. Após diagnóstico das fraturas, a paciente foi submetida à cirurgia sob anestesia geral para redução e fixação das mesmas. Realizou-se acessos em ferimento na região mentual e retromandibular bilateral com posterior síntese das fraturas utilizando fixação interna rígida com placas do sistema 2.0mm, associada a odontossíntese na fratura de sínfise. Ao acompanhamento periódico, a eleição do tratamento cirúrgico para fraturas mandibulares em pacientes pediátricos, pode permitir segurança no crescimento ósseo mandibular e facial(AU)

The indications for treatment of mandibular fractures in pediatric patients vary from conservative, non-rigid fixation and rigid internal fixation. Changes in bone growth, temporomandibular joint disorders and facial asymmetries may be due to treatment failure. The objective of this work is to report a surgical approach to bilateral symphysis and mandibular condyle fractures in a pediatric patient. Female patient, 9 years old, was sent to the State General Hospital - Bahia, victim of a fall in level, suffering from trauma to the face. She presented a main complaint, mentioned by her mother, of difficulties in closing her mouth. On physical examination, the patient presented atypical mobility when manipulating the jaw, anterior open bite, sublingual ecchymosis, absence of dental units 74 and 75, with regular mouth opening and sutures in position in the chin region. When examining the computed tomography image of the face, signs suggestive of fracture in the region of the symphysis and bilateral mandibular condyles were noted. After diagnosis of the fractures, the patient underwent surgery under general anesthesia to reduce and fix them. Access was performed on a wound in the mental and bilateral retromandibular region with subsequent synthesis of the fractures using rigid internal fixation with 2.0mm system plates, associated with odontosynthesis in the symphysis fracture. With periodic monitoring, the choice of surgical treatment for mandibular fractures in pediatric patients can allow for safe mandibular and facial bone growth(AU)

Morpho-functional analysis of the temporomandibular joint following mandible-first bimaxillary surgery with mandible-only patient-specific implants.

The aim of this study was to evaluate condylar and glenoid fossa remodeling after bimaxillary orthognathic surgery guided by patient-specific mandibular implants. In total, 18 patients suffering from dentofacial dysmorphism underwent a virtually planned bimaxillary mandibular PSI-guided orthognathic procedure. One month prior to surgery, patients underwent a CBCT scan and optical scans of the dental arches; these datasets were re-acquired 1 month and at least 9 months postsurgery. Three-dimensional models of the condyles, glenoid fossae, and interarticular surface space (IASS) were obtained and compared to evaluate the roto-translational positional discrepancy and surface variation of each condyle and glenoid fossa, and the IASS variation. The condylar position varied by an average of 4.31° and 2.18 mm, mainly due to surgically unavoidable ramus position correction. Condylar resorption remodeling was minimal (average ≤ 0.1 mm), and affected skeletal class III patients the most. Later condylar remodeling was positively correlated with patient age. No significant glenoid fossa remodeling was observed. No postoperative orofacial pain was recorded at clinical follow-up. The procedure was accurate in minimizing the shift in relationship between the bony components of the TMJ and their remodeling, and was effective in avoiding postoperative onset of orofacial pain. An increase in sample size, however, would be useful to confirm our findings.

Evaluating changes in the condylar head after orthognathic surgery with or without articular disc repositioning: a systematic review.

Failures in orthognathic surgery are associated with different factors, including those related to untreated or undiagnosed preoperative temporomandibular joint (TMJ) disorders. This systematic review aimed to assess potential alterations in the condylar head following orthognathic surgery. A systematic search for randomised controlled trials and retrospective studies was performed. For inclusion in the review, studies had to meet the following eligibility criteria according to the PICO framework: Patients: patients with orthognathic deformity and temporomandibular dysfunction (or temporomandibular osteoarthritis); Intervention: patients submitted to orthognathic surgery concomitantly with TMJ disjunction; Control: patients undergoing only orthognathic surgery with or without presurgical data; and Outcome: changes in temporomandibular joint position and volume. Nine studies met all the inclusion criteria and were selected for qualitative analysis. The results of this review show that simultaneous articular disc repositioning and orthognathic surgery provide better results in patients with preoperatively diagnosed condylar osteoarthritic changes. In conclusion, condylar remodelling (resorption/deposition) and its extent are determined by the direction of condylar displacement during surgery. Other factors such as age are also associated with the development of condylar resorption.

Evaluation of the accuracy of a fully digital method of measuring sagittal condylar inclination.

OBJECTIVES: This clinical study aimed to evaluate the accuracy of a fully digital technique for measuring sagittal condylar inclination (SCI), as well as validating whether differences existed between the left and right SCI values of the same participant, to provide a reference for clinical practice. METHODS: Ten participants with good occlusal relationship and normal temporomandibular joint were recruited. Three methods were used to measure the SCI values of the participants, namely, A (mechanical facebow transferring and mechanical articulator-based measuring method with physical protrusive interocclusal registration), B (face scan-based virtual facebow and virtual articulator-based measuring method with digital protrusive interocclusal registration), and C (jaw motion tracking system-based measuring method). With the group subjected to methods A and C as the control, the SCI values obtained by the three methods were statistically analyzed. The left and right SCI values of the same participant were also compared. RESULTS: The left and right SCI values measured by method A were 41.70°±7.09° and 42.80°±8.62°, those by method B were 35.09°±12.49° and 37.63°±12.10°, and those by method C were 39.43°±8.72° and 38.45°±6.91°. No significant difference existed among the SCI values measured by the three methods (P>0.05). Meanwhile, no statistical difference existed between the SCI values on the left and right sides of the same participant (P>0.05). CONCLUSIONS: The accuracy of the virtual facebow and digital protrusive occlusal registration based SCI measuring method was the same as that of mechanical facebow based and jaw motion tracking system-based methods. The SCI values on the left and right sides of the same participant were similar. Clinically, an appropriate SCI measurement and setting strategy can be selected based on the actual situations.

Analysis of clinical changes and magnetic resonance imaging features of 37 patients with temporomandibular joint disc condylar complex with anterior disc displacement without reduction.

OBJECTIVES: This study aims to investigate clinical outcomes, imaging changes, and age differences with regard to temporomandibular joint disc condylar complex with anterior disc displacement without reduction (ADDWoR). METHODS: A total of 37 patients (45 lateral joints) with ADDWoR who were admitted to The First Affiliated Hospital of Zheng Zhou University from January 2016 to June 2023 were selected. The patients were composed of 4 males and 33 females and had an average age of 23.5 years. The average course of the disease was 14.4 months. Clinical and magnetic resonance imaging (MRI) data were collected at the end of initial diagnosis and follow-up, and the length and thickness of the articular disc, the angle of the disc condyle, and the height of the condyle were measured. The statistical significance of the changes was assessed using SPSS 25.0 software package. RESULTS: At the end of follow-up, disc displacement in three patients (three lateral joints) was healed. Approximately 48.4% of the patients felt that limitation of mandibular movement was not alleviated; 58.3% of patients reported that pain during mouth opening was not reduced; 54.5% reported pain while chewing; 33.3% of the patients showed facial deviation, and only one showed remission. The mean disk-condyle angle increased from 61.63° to 67.81°. The average length of articular disc shortened from 8.20 mm to 7.27 mm, and the height of the condyle significantly decreased from 23.17 mm to 22.76 mm (P<0.05). The absorption ratio of the condyle increased, and no significant differences in the changes of joint soft and hard tissues between the adolescent and adult groups (P>0.05). CONCLUSIONS: In different age groups of patients with ADDWoR, clinical symptoms cannot be completely relieved. The disc is anteriorly displaced and shortens, condylar height decreases, and secondary facial asymmetry and mandibular retraction occur.

Quantitative and qualitative condylar changes following stabilization splint therapy in patients with temporomandibular joint disorders with and without skeletal lateral mandibular asymmetry: a cone beam computed tomographic study.

BACKGROUND: Temporomandibular disorders (TMDs) encompass pain and dysfunction in the jaw, muscles, and adjacent structures. This study aimed to explore the quantitative (condylar position, morphology) and qualitative (bone mineral density (BMD)) therapeutic outcomes following a stabilization splint (S.S.) therapy in adult patients diagnosed with TMD (Arthralgia) with/without lateral mandibular asymmetry (MA) using cone beam computed tomography (CBCT). METHODS: In this retrospective clinical study, 60 adult TMD patients who received S.S. therapy were enrolled and allocated into the TMD group (TMDG) and TMD with MA group (TMD + MAG). The diagnosis was made according to the Diagnostic Criteria for TMD (DC/TMD) AXIS I. MA was measured from the mid-sagittal plane to the Menton point. CBCT was used to scan the temporomandibular joints pre- (T0) and post- (T1)-treatment for three-dimensional analysis. Intra- and intergroup statistical comparisons were performed using the Wilcoxon signed ranks and the Kruskal‒Wallis test. RESULTS: For quantitative comparisons, there was a statistically significant difference between T0 and T1 in the joint spaces of TMD + MAG (anterior, superior, posterior, and coronal lateral on the deviated side as well as in the superior, coronal medial joint space of the contralateral side). Morphologically, the deviated side had a narrower condylar width, reduced condylar height, and a steeper eminence angle. In contrast, the contralateral side tended to have a greater condylar length. For qualitative measurements, BMD also showed statistical significance between T0 and T1 in the majority of the condyle slopes (AS, SS, PS, and LS on the deviated side and in AS and MS on the contralateral side) of TMD + MAG. Additionally, only the AS and PS showed significance in TMDG. CONCLUSION: Multiple joint space widening (AJS and CMS) and narrowing (SJS, PJS, and CLS) could characterize the deviated side in TMD + MA. Factors like narrower condylar width, reduced condylar height, and steeper eminence angle on the deviated side can worsen TMD + MA. Proper alignment of the condyle-disc position is essential for optimal function and load distribution, potentially affecting bone mineral density (BMD). MA plays a prominent role in disturbing bone densities. S.S. therapy shows more evident outcomes in TMD + MAG (on the deviated side compared to the contralateral side) than the TMDG.

Different methods of determining centric relation - comparison with a digital mandibular motion analyser.

BACKGROUND: Finding and registering the maxillary-mandibular jaw relation is crucial in dental practice. Several comparative studies have been conducted to investigate the reproducibility and accuracy of techniques for determining the centric relation (CR) position of the mandible. The aim of our study was to determine which of seven different CR determination methods had the smallest deviation from the theoretical zero with the help of a digital mandibular motion analyser. The chosen theoretical zero position, the maximal intercuspal position (MIP), is the most reproducible and widely used position. METHODS: Thirty-four volunteers (24 females and 10 males) with a mean (SD) age of 29.1 (± 7.3) years with a negative history of temporomandibular disorder (TMD) participated in the study. A digital mandibular motion analyser was used to register the condylar position after the use of each technique for the determination of CR. The calibration was performed to the maximal intercuspal position (MIP) for each volunteer. The investigated techniques were (A) the gothic arch tracer, (B) the adduction field method, (C) Dawson's bimanual manipulation, (D) the patient placing the tongue tip on the palatal rugae, (E) the patient placing the tongue tip to the border of the hard and soft palate, (F) the patient actively pulling the chin backwards, and (G) the examiner pushing the patient's chin back. RESULTS: The position of the mandibular condyle was illustrated in a three-dimensional coordinate system, where the origin represented the MIP. Among the seven methods examined, five showed significant deviations compared to the MIP. Among these, two methods resulted in posterior deviation of the condyles. Methods C and E coincided with the MIP in all directions. CONCLUSIONS: Within the limitations of our study, we found that the smallest deviations from our theoretical zero (MIP) among the investigated centric relation determining methods were obtained with the bimanual mandibular manipulation technique derived from Dawson and the placement of the tongue tip on the border of the hard and soft palate (linguomandibular homotrophy theory).

The utilization of decision trees on orthopantomographic and lateral panoramic graphs for the diagnosis of unilateral anterior disc displacement of the temporomandibular joint.

BACKGROUND: Investigation is to utilize decision trees in conjunction with orthopantomography (OPT) and lateral panoramic graphy (LPG) to diagnose unilateral anterior disc displacement (ADD) of the temporomandibular joint. METHODS: In this study, 161 patients with images obtained through all three imaging methods, MRI, OPT, and LPG, were selected from the archives. The participants were categorized into two groups: the study group, comprising 89 patients with unilateral anterior disc displacement, and the control group, consisting of 72 healthy individuals. Measurements, including 2 angles (antero-posterior angle and superior-inferior angle) and 3 distance parameters (anterior joint space distance, superior joint space distance, and posterior joint space distance), were conducted on each imaging modality dataset. To assess the obtained measurement data within each patient, the differences from each measurement were calculated. Statistical analysis of the measurement differences between the control and study groups was carried out with independent t test, and decision trees were generated using the SPSS 25 decision tree module 5.0. RESULTS: In ADD patients, it was statistically significantly found that the APA increased while the SIA decreased for angle measurements. But for linear measurements, AS increased while the SS and PS decreased in MRI, OPT, and LPG. CONCLUSION: ADD can be diagnosed in OPT and LPG. The identification of the specific type of ADD that occurs in the temporomandibular joint is not feasible.

BMP2 rs1005464 is associated with mandibular condyle size variation.

This study aimed to evaluate the association between single nucleotide polymorphisms (SNPs) in endochondral development-related genes and mandibular condyle shape, size, volume, and symmetry traits. Cone-beam Computed Tomographies and genomic DNA from 118 individuals were evaluated (age range: 15-66 years). Data from twelve 3D landmarks on mandibular condyles were submitted to morphometric analyses including Procrustes fit, principal component analysis, and estimation of centroid sizes and fluctuating asymmetry scores. Condylar volumes were additionally measured. Seven SNPs across BMP2, BMP4, RUNX2 and SMAD6 were genotyped. Linear models were fit to evaluate the effect of the SNPs on the mandibular condyles' quantitative traits. Only the association between BMP2 rs1005464 and centroid size remained significant after adjusting to account for the false discovery rate due to multiple testing. Individuals carrying at least one A allele for this SNP showed larger condylar size than common homozygotes GG (ß = 0.043; 95% CI: 0.014-0.071; P value = 0.028). The model including BMP2 rs1005464, age and sex of the participants explained 17% of the variation in condylar size. Shape, volume, and symmetry were not associated with the evaluated SNPs. These results suggest that BMP2 rs1005464 might be associated with variation in the mandibular condyles size.

The effect of tooth loss on the temporomandibular joint space: A CBCT study.

OBJECTIVE: The tooth loss has a significant impact on the positioning of the condyle in the glenoid fossa and joint spaces of the temporomandibular joint (TMJ). The aim of this study was to assess the association between tooth loss and TMJ spaces using cone beam computed tomography (CBCT) images. MATERIALS AND METHODS: This retrospective investigation involved the evaluation of CBCT images of the bilateral TMJs in a cohort of 111 individuals, comprising 68 males and 43 women. The dentition of the patients was categorized into three categories, including A (65.4%), B (19.1%), and C (16.4%), based on the Eichner index. Anterior, superior, and posterior joint spaces were then measured in sagittal views. The Kruskal-Wallis test and Mann-Whitney test were employed to identify significant differences among the three Eichner groups. RESULTS: The findings of the present study suggested that there was no statistically significant variation in the anterior joint space among different Eichner groups within the general population (p = .781). Nevertheless, the superior and posterior joint spaces exhibited statistically significant alterations, as indicated by p-values of .039 and .010, respectively. It was detected that condyles were positioned inferiorly and posteriorly in group C when compared to groups A and B. CONCLUSION: The present study indicated that greater loss of tooth-supporting zones is associated with posterior and inferior displacement of condyles. Understanding these relationships helps emphasize how crucial it is to replace missing teeth to enhance occlusion support and, in turn, stop the progression and further deterioration of temporomandibular disorders.

Mandibular condyle volumes are associated with facial asymmetry in patients with cleft lip and palate: A retrospective cohort study.

This study compares condylar volumetric asymmetry and facial asymmetry in patients with cleft lip and/or palate (CLP) and controls. The mandibular condyle is important to facial growth, but its role in facial asymmetry for those with CLP has not been described. Condylar volumes and mandibular asymmetry were retrospectively calculated using Mimics Version 23.0 (Materialise, Leuven, Belgium) from patients with CLP undergoing computed tomography (CT) imaging and a cohort of controls. A total of 101 participants, 60 with CLP and 41 controls, had mean condylar volumetric asymmetry of 16.4 ± 17.4 % (CLP) and 6.0 ± 4.0 % (controls) (p = 0.0002). Patients with CLP who had clinically significant chin deviation (>4 mm) had more asymmetric condyles than those without significant chin deviation (p = 0.003). The chin deviated toward the smaller condyle in patients with facial asymmetry more often than in patients without facial asymmetry (81 % vs. 62 %, p = 0.033). While controls had some degree of condylar asymmetry, it tended to be milder and not associated with facial asymmetry. There is a greater degree of condylar volumetric asymmetry in patients with CLP compared to individuals in the general population. Clinically significant facial asymmetry in CLP is associated with a higher degree of condylar asymmetry, with the facial midline deviating toward the smaller condyle.