Use of a novel three-dimensional anatomical plating system for treatment of caudal mandibular fractures in cats: 13 cases (2019-2023).

CASE SERIES SUMMARY: A total of 13 cases of cats with a caudal mandibular fracture treated with a novel surgical technique using the Ramus Anatomical Plate system were reviewed. Preoperative, immediate postoperative and a minimum of 8 weeks postoperative CT images were required as inclusion criteria. The outcome and complications were determined from clinical data and radiographic follow-up examinations. All cases achieved adequate anatomical reduction, resulting in a functional and atraumatic occlusion postoperatively. No intraoperative complications were reported. Time to voluntary food intake was in the range of 1-25 days. No evidence of disruptions to the implants or screw loosening was observed in the 8-week postoperative CT imaging, with radiographic evidence of complete osseous union in all fractures. The most common postoperative complication was swelling at the surgical site. Two cats had postoperative exophthalmos due to retrobulbar haemorrhage, and one cat exhibited partial wound dehiscence 5 days postoperatively, which resolved with medical management. Longer-term complications included intraoral plate exposure in one cat, which required plate removal 10 months postoperatively. RELEVANCE AND NOVEL INFORMATION: In this case series, rigid internal fixation of caudal mandibular fractures using the Ramus Anatomical Plate osteosynthesis system was associated with a minimal complication rate, and satisfactory radiographic and clinical outcomes. The reported outcomes of this novel technique are favourable when compared with previous techniques described for the management of these fracture types.

Effect of stainless-steel wire internal fixation on intracapsular condylar fracture.

OBJECTIVES: The aim of the study was to investigate the clinical effect of stainless-steel wire fixation on the early mouth-opening movement of an intracapsular fracture involving the condylar process. MATERIALS AND METHODS: In this study, patients who underwent mandibular condylar intracapsular fracture surgery in our hospital from 2012 to 2020 were selected as research subjects. A total of 44 patients received steel wire internal fixation treatment, 32 patients received titanium plate-and-nail rigid internal fixation, and 28 patients underwent conservative non-surgical treatment. RESULTS: For the patients in the stainless-steel wire group, the degree of mouth opening reached normal levels of 3.7 cm approximately 10 days after surgery. The recovery time for the patients in the titanium plate-and-nail rigid internal-fixation group was 21 days, while the patients in the conservative treatment group needed 60 days to recover. CONCLUSION: The treatment of fixation with a stainless-steel wire for intracapsular condylar fracture reduced the time taken to perform mouth-opening exercises and improved the recovery rate of patients.

OBJETIVO: Explorar el efecto clínico de la fijación de alambre de acero inoxidable en el movimiento temprano de apertura de la boca en la fractura interna del cóndilo. MÉTODO: Este estudio seleccionó a pacientes que se sometieron a cirugía de fractura intracapsular de cóndilo en nuestro hospital de 2012 a 2020 como sujetos de investigación. Un total de 44 pacientes recibieron tratamiento de fijación interna de alambre de acero, 32 recibieron placa de titanio y fijación interna con clavos, y 28 recibieron tratamiento conservador no quirúrgico. RESULTADOS: En los pacientes del grupo de alambre de acero inoxidable, alrededor de 10 días después de la cirugía el grado de apertura de la boca alcanzó un valor normal de 3.7 cm. El tiempo de recuperación de los pacientes en el grupo de fijación interna con clavos y placa de titanio fue de 21 días, mientras que los pacientes en el grupo de tratamiento conservador tardaron 60 días en recuperarse. CONCLUSIONES: La fijación con alambre de acero inoxidable para el tratamiento de la fractura intracapsular del cóndilo acorta el tiempo hasta la apertura de la boca y mejora la tasa de recuperación de los pacientes.

[Fractures of the mandibular condyle]. / Fracturen van het collum mandibulae.

A fracture of the mandibular condyle is a common fracture of the mandible. After the diagnosis has been made, there are various treatment options: wait and see, conservative or surgical. Which of these treatment options is best depends on several different factors and is often the subject of debate. A common complication of a fracture of the mandibular condyle is malocclusion. Malocclusion can cause problems - even in the long term - for which the patient often requires secondary treatment.

Biomechanical assessment of mandibular fracture fixation using finite element analysis validated by polymeric mandible mechanical testing.

The clinical finite element analysis (FEA) application in maxillofacial surgery for mandibular fracture is limited due to the lack of a validated FEA model. Therefore, this study aims to develop a validated FEA model for mandibular fracture treatment, by assessing non-comminuted mandibular fracture fixation. FEA models were created for mandibles with single simple symphysis, parasymphysis, and angle fractures; fixated with 2.0 mm 4-hole titanium miniplates located at three different configurations with clinically known differences in stability, namely: superior border, inferior border, and two plate combinations. The FEA models were validated with series of Synbone polymeric mandible mechanical testing (PMMT) using a mechanical test bench with an identical test set-up. The first outcome was that the current understanding of stable simple mandibular fracture fixation was reproducible in both the FEA and PMMT. Optimal fracture stability was achieved with the two plate combination, followed by superior border, and then inferior border plating. Second, the FEA and the PMMT findings were consistent and comparable (a total displacement difference of 1.13 mm). In conclusion, the FEA and the PMMT outcomes were similar, and hence suitable for simple mandibular fracture treatment analyses. The FEA model can possibly be applied for non-routine complex mandibular fracture management.

Bone quality assessment in patients with healing mandibular fracture sites: a computed tomography investigation.

The objective of this retrospective study was to assess the bone quality of healing mandibular fracture sites by measuring the Hounsfield units (HU) on computed tomographic (CT) images obtained presurgery and postsurgery in patients treated with rigid internal fixation (RIF). The HU values of healing fracture sites were compared to those of corresponding nonfractured (control) sites on the opposing side and cervical vertebrae sites in the same patients. In total, 31 patients with 45 mandibular fractures treated with RIF underwent presurgical and postsurgical CT examinations. The scans performed after surgery (1, 3, 6, 12, or 18 months) were taken only when there was a need for radiographic evaluation due to a complaint of discomfort from the patient or when the surgeon needed to verify the postsurgical outcome, and each patient underwent only a single postsurgical CT. At the presurgical CT examination, the HU values were lower in the fracture sites than in the control sites. At 3 months postsurgery, the HU values in the fracture sites had increased as the mandibular bone healed. At 6 months postsurgery, the HU values in the fracture sites were higher than those of the control sites. At 12 and 18 months postsurgery, the HU values of both sites were similar. The HU values of the cervical vertebrae remained constant with time. These results suggest that, in patients who have been treated with RIF for mandibular bone fracture, HU values measured by CT vary across time, expressing the physiologic bone healing process.

Which factors affect the lingual fracture pattern in sagittal split ramus osteotomy?

The purpose of this study was to elucidate the effects of mandibular anatomy and osteotomy technique on lingual fracture patterns in SSRO. The predictor variables were: length of horizontal medial osteotomy; type of border osteotomy; buccolingual width; and vertical length of the basal cortex. The outcome variable was the type of lingual split pattern. This was categorized into four types according to a lingual split scale (LSS): LSS 1, true Hunsuck; LSS 2, fracture line to posterior border of the ramus; LSS 3, through to mandibular canal; LSS 4, unfavorable fracture pattern. Data were analyzed using analysis of variance and the Pearson χ2 test. Values of p < 0.05 were considered statistically significant. The study sample comprised 312 lingual split patterns in 156 patients. The most common type of lingual split pattern was LSS 1 (n = 204). There was a significant relationship between inferior border osteotomy type and LSS type (p = 0.001). Whilst LSS 1 was the most common among all border osteotomy types. LSS 4 was most frequently observed in cases where the lower border osteotomy remained in the buccal surface. According to the results of this study, the likelihood of an unfavorable split pattern increases when the lower border osteotomy remains in the buccal surface.

A single-centre retrospective 10-year experience of the rhombic 3D condylar fracture plate for open reduction and internal fixation of condylar neck and base fractures.

Fractures of the mandibular condyle account for a significant proportion of mandibular fractures. The specific functional loads require particular specifications for the implant design used for open reduction and internal fixation of such fractures. The clinical and radiographic outcomes in patients treated using a single rhombic 3D condylar fracture plate for open reduction and internal fixation at a single institution, and who fulfilled the inclusion and exclusion criteria, are presented. The primary outcome variables were: occlusion, maximum interincisal distance and mandibular excursion at 1, 3, and 6 months postoperatively, and radiographic measurements for mandibular height and gonion angle. In total, 263 patients were included, of whom 173 (65.8%) were male and 90 (34.2%) female. The mean age was 40.4 ± 18.9 years. There was satisfactory occlusion in 98.9% of patients at the 6-month follow-up, and a significant improvement in all parameters for mandibular excursion (p < 0.001), with a reduced ramus height and an increase in the gonion angle on the fractured side. Excellent clinical and radiographic results were achieved using the rhombic-shaped implant, deeming it appropriate for the osteosynthesis of mandibular condyle fractures.

Effective strategies in the management of anterior mandibular fractures: a comprehensive systematic review.

This review examines the prevailing modalities for fractures of the anterior mandible, which represent a significant proportion of the maxillofacial injuries commonly treated by oral and maxillofacial surgeons. The article traces the historical shift from conservative techniques to the dominant management strategies of open reduction and fixation. Encompassing a range of studies, the review, in accordance with PRISMA 2020 recommendations, meticulously examines various fixation methods, assessing their efficacy in achieving stability of fracture, early healing, and mobilisation. The comparison of these methods highlights their unique advantages and limitations, and demonstrates the need for more nuanced and precise approaches. The review emphasises evidence-based methodology in the management of anterior mandibular fractures (AMF), highlighting the benefits offered by innovative techniques such as 3D miniplates. It also acknowledges the advantages provided by older fixation devices such as lag screws. The importance of postoperative outcomes and the need for tailored treatment strategies are recognised, considering the complex nature of these fractures.

Evaluation of graphene oxide-doped poly-lactic-co-glycolic acid (GO-PLGA) nanofiber absorbable plates and titanium plates for bone stability and healing in mandibular corpus fractures: An experimental study.

BACKGROUND: Open reduction with internal fixation is the preferred treatment option for displaced facial bone fractures. The superior mechanical properties of metallic plates have made them the most widely used material in existing bone fixation systems. However, after the healing period, these permanent plates can cause various problems. Alternative bioresorbable materials are being investigated to reduce these potential problems. This study compares bone stability and viability by using graphene oxide (GO)-doped poly-lactic-co-glycolic acid (PLGA) nanofiber plates and titanium plates for rats with fractured mandibles. MATERIALS AND METHODS: The study included 20 male Sprague-Dawley rats, divided into four groups: a control group (Group I), a mandibular fracture group with no additional application (Group II), a mandibular fracture group repaired with titanium plates (Group III), and a mandibular fracture group repaired with GO-PLGA plates (Group IV). After 2 months, all of the rats were euthanized. A bone compression test was performed to assess bone stability, and a histological examination was performed to evaluate bone healing. RESULTS: The osteocyte lacunae, Haversian ducts, canaliculi, and vascular structures of Group IV were found to be higher. In the compression test, vertical compression was applied to the bone axis, and Group IV had a higher maximum load and maximum stretch. GO-PLGA plates were found to be statistically superior to titanium plates in terms of both bone stability and bone healing (p < 0.05). CONCLUSIONS: The present study found that GO-PLGA plates are more effective than titanium plates for the treatment of mandibular corpus fractures.

Patient outcomes and complications following various maxillomandibular fixation techniques: A systematic review and meta-analysis.

PURPOSE: Currently, there are several methods of achieving maxillomandibular fixation (MMF), each with its unique operative considerations and subsequent patient outcomes and complications. In this study, we reviewed the literature to evaluate and compare all MMF methods. METHODS: A systematic review of all MMF types was conducted and post-operative outcome data were analyzed and compared among the different types. Conventional Erich arch bars were compared to hybrid arch bars, MMF screws, and eyelet interdental wiring. A random-effects meta-analysis was used to determine the mean differences, and 95% confidence intervals (CIs) with a statistical significance of P < 0.05. RESULTS: Among the 4234 articles identified, 24 were included, and 17 were meta-analyzed. Time to achieve MMF (-43.38 min; 95% CI, -58.20 to -28.56; P < 0.001), total operative time (-30.33 min; 95% CI, -61.05 to 0.39; P = 0.05), incidence of wire puncture injuries and glove perforations (0.11; 95% CI, 0.04 to 0.30; P < 0.001), and incidence of poor oral hygiene (0.08; 95% CI, 0.02 to 0.28; P < 0.001) were lower for alternative MMF interventions compared to those of the conventional Erich arch bars. CONCLUSIONS: Alternative MMF methods required shorter operative time to achieve MMF and demonstrated other increased efficiencies of practice such as shorter total operative time and decreased glove perforations, when compared to conventional Erich arch bars. If a patient is a candidate for MMF, the presented alternative MMF techniques should be considered depending on the clinical context and availability of institutional resources.

M3YOLOv5: Feature enhanced YOLOv5 model for mandibular fracture detection.

BACKGROUND: It is very important to detect mandibular fracture region. However, the size of mandibular fracture region is different due to different anatomical positions, different sites and different degrees of force. It is difficult to locate and recognize fracture region accurately. METHODS: To solve these problems, M3YOLOv5 model is proposed in this paper. Three feature enhancement strategies are designed, which improve the ability of model to locate and recognize mandibular fracture region. Firstly, Global-Local Feature Extraction Module (GLFEM) is designed. By effectively combining Convolutional Neural Network (CNN) and Transformer, the problem of insufficient global information extraction ability of CNN is complemented, and the positioning ability of the model to the fracture region is improved. Secondly, in order to improve the interaction ability of context information, Deep-Shallow Feature Interaction Module (DSFIM) is designed. In this module, the spatial information in the shallow feature layer is embedded to the deep feature layer by the spatial attention mechanism, and the semantic information in the deep feature layer is embedded to the shallow feature layer by the channel attention mechanism. The fracture region recognition ability of the model is improved. Finally, Multi-scale Multi receptive-field Feature Mixing Module (MMFMM) is designed. Deep separate convolution chains are used in this modal, which is composed by multiple layers of different scales and different dilation coefficients. This method provides richer receptive field for the model, and the ability to detect fracture region of different scales is improved. RESULTS: The precision rate, mAP value, recall rate and F1 value of M3YOLOv5 model on mandibular fracture CT data set are 97.18%, 96.86%, 94.42% and 95.58% respectively. The experimental results show that there is better performance about M3YOLOv5 model than the mainstream detection models. CONCLUSION: The M3YOLOv5 model can effectively recognize and locate the mandibular fracture region, which is of great significance for doctors' clinical diagnosis.

Streamlining complex mandibular fracture treatment: Integration of virtual surgical planning and short-segment drilling guides.

This study aimed to evaluate the feasibility and accuracy of a combined virtual surgical planning (VPS) and short-segment drilling guides (SSDGs) workflow for the treatment of complex mandibular fractures. Consecutive patients with complex mandibular fractures underwent treatment using the VPS and SSDGs workflow from August 2020 to April 2022. Various mandibular landmarks were compared between the preoperative virtual surgical plan and postoperative data, including condylar distance (CoD), mandibular angle width (GoL-GoR), GoMeGo angle (∠GoL-Me-GoR), the difference in mandibular angles between the left and right sides (Δ∠Co-Go-Me), and the difference in length between the left and right mandibular body (ΔGo-Me). Additionally, preoperative preparation time and surgical duration were retrospectively analyzed and compared to conventional surgery. All 14 consecutive patients with complex mandibular fractures achieved successful reduction using the VPS and SSDGs workflow. Three-dimensional comparison revealed a mean deviation distance of 0.91 ± 0.50 mm and a root-mean-square deviation of 1.75 ± 0.47 mm between the preoperative designed mandible model and the postoperative mandible model. The percentage of points with deviation distances less than 2 mm, 1 mm, and 0.5 mm between preoperative and postoperative models were 78.47 ± 8.87 %, 60.02 ± 14.28 %, and 38.64 ± 15.48 %, respectively. There were no significant differences observed in CoD, GoL-GoR, ∠GoL-Me-GoR, Δ∠Co-Go-Me, and ΔGo-Me between preoperative virtual surgical planning and postoperative measurements. Furthermore, no significant differences were found in the injury-to-surgery interval, admission-to-surgery interval, and surgical duration between the workflow and conventional surgery. The combined VPS and SSDGs workflow proved to be an accurate and feasible method for treating complex mandibular fractures. It offers advantages such as minimal preoperative preparation time and the ability to precise transfer screw positions of the pre-bent reconstruction plate during surgery. This approach is particularly suitable for managing complex mandibular fractures.

The necessity of removal of third molars involved in mandibular fractures: A retrospective study.

This retrospective analysis aimed to investigate the necessity of removing the wisdom tooth in cases of angle fractures of the mandible. The study retrieved 595 mandible fractures from January 2006 to December 2021 through the Hospital Inpatient Enquiry System, of which 303 involved a fracture through the angle of the mandible, including the wisdom tooth socket. Of these, 203 (66.9%) underwent open reduction and internal fixation with retention of the third molar. The authors found that only four (2%) patients returned for the removal of plates and the retained third molar during the follow-up period. Therefore, the authors concluded that wisdom teeth removal should remain an exception during open reduction and internal fixation of mandibular angle fractures unless they hinder fracture reduction, pose a potential infection risk, or interfere with occlusal stability.

Liposomal Bupivacaine Suspension Can Reduce the Length of Stay of Patients Undergoing Open Reduction and Internal Fixation of Mandibular Fracture.

BACKGROUND: Poorly controlled postoperative pain results in prolonged length of stay (LOS). The use of liposome bupivacaine injectable suspension (LB) for postoperative pain control is a relatively recent practice. PURPOSE: The purpose of this study was to investigate the following. In patients undergoing open reduction and internal fixation of mandibular fracture(s), does the use of LB reduce LOS compared with regular bupivacaine? STUDY DESIGN, SETTING, SAMPLE: We implemented a retrospective cohort study of consecutive patients with mandibular fracture(s) presented to Grady Memorial Hospital in Atlanta, GA, from January 2021 to January 2022. Adult patients diagnosed with 1 or more isolated mandibular fracture(s) and treated by open reduction and internal fixation were included. We excluded patients with non-isolated mandibular fracture(s), isolated condyle, infected, previously treated fractures, and documented allergy to amide local anesthetics and/or its preservatives. PREDICTOR/EXPOSURE/INDEPENDENT VARIABLE: Primary predictor variable was local anesthetic (regular bupivacaine alone or LB/regular bupivacaine). MAIN OUTCOME VARIABLE(S): Primary outcome variable was LOS, defined as the number of days from surgical procedure until discharge. Secondary outcome variables were number of opioid prescription refill(s) and postoperative pain at discharge, determined with visual analogue scale. COVARIATES: The covariates were Demographics, American Society of Anesthesiologists classification, smoking, alcohol exposure, illicit drug use, etiology, location, laterality, number of fracture(s), surgical approach, and method of maxillomandibular fixation. ANALYSES: Univariate and bivariate analyses were calculated. Statistical significance was P < .05. RESULTS: Sixty-two subjects met the inclusion criteria (31 subjects in each group). The mean ages in LB/regular bupivacaine and regular bupivacaine alone groups were 33.3 (±12) and 35.1 (±15.6), respectively (P = .94), the mean LOS in days was 0.23 (±0.44) in LB/regular bupivacaine and 1.48 (±1.77) in regular bupivacaine alone (P= < .001), and the mean VAS pain scores for LB/regular bupivacaine and regular bupivacaine alone groups were 0.53 (±1.07) and 1.87 (±2.66), respectively (P = .02). Mean number of opioid prescription refill(s) was 0 in LB/regular bupivacaine and 1 in regular bupivacaine alone group, respectively (P = .01). CONCLUSION AND RELEVANCE: The use of LB/regular bupivacaine for mandibular fracture(s) results in decrease in LOS and number of opioid refills compared to regular bupivacaine alone.

Is Insurance Payer Associated With Hospital Admission of Emergency Department Patients With Mandible Fractures?

BACKGROUND: There is a lack of consensus on the optimal triage pathway for emergency department (ED) patients with mandibular fractures. It remains unclear if patient insurance payers predict hospital admission given potentially competing logistical and health system incentives. PURPOSE: To generate nationally representative estimates of the frequency of hospital admission and its association with primary insurance payers for ED patients with mandible fractures. METHODS: This retrospective cohort study used the 2018 Nationwide Emergency Department Sample, the largest all-payer database in the United States, to identify patients with mandible fractures. The database includes a stratified sample with discharge weights to generate nationally representative estimates. Patients with other facial fractures and/or concomitant injuries that independently warranted admission were excluded. PREDICTOR: The primary predictor variable was primary payer (public, private, self-pay, and other/no charge). OUTCOME VARIABLE: The primary outcome variable was hospital admission (yes/no). COVARIATES: Covariates included patient-, medical/injury-, and hospital-related variables. ANALYSES: Descriptive statistics, along with bivariate and multivariate logistic regression with Bonferroni correction, were used to produce national estimates and identify predictors of admission. P < .01 was considered significant. RESULTS: The cohort included 27,238 weighted encounters involving isolated mandible fractures, of which 5,345(20%) were admitted. The payers for admitted patients were 46% public, 25% private, 22% self-pay, and 7% no charge/other. In bivariate analyses, public insurance was associated with a higher likelihood of admission than private insurance (RR 1.24, 95% CI 1.06 to 1.45), though there was no association in the multivariate model (OR 1.03, 95% CI 0.83 to 1.28). In multivariate analysis, higher Charlson Comorbidity Index (OR 1.32, 95% CI 1.18 to 1.48), alcohol-related disorder (OR 3.47, 95% CI 2.74 to 4.39), substance-related disorder (OR 1.43, 95% CI 1.20 to 1.71), and more mandible fractures (OR 3.08, 95% CI 2.65 to 3.59) were associated with admission. Compared to body fractures, subcondylar (OR 3.83, 95% CI 2.39 to 6.14), angle (OR 3.53, 95% CI 2.84 to 6.09), and symphysis (OR 4.14, 95% CI 2.84 to 6.09) fractures had higher odds of admission. Finally, level I (OR 4.11, 95% CI 2.41 to 6.98) and level II (OR 3.16, 95% CI 1.85 to 5.39) trauma centers had higher odds of admission. CONCLUSIONS: In 2018, 20% of ED patients with isolated mandible fractures were admitted. Several patient and hospital characteristics were predictors of admission. Insurance status was not associated with admission.

Infection Rates of an Intraoral Versus Extraoral Approach to Mandibular Fracture Repairs are Equal: A Systematic Review and Meta-Analysis.

PURPOSE: This study investigates whether the intraoral approach to mandibular open reduction and internal fixation, through exposure to the oral cavity's microbiome, results in higher infection rates compared to the extraoral approach, thus addressing a critical public health concern, potentially offering an opportunity to reduce health-care costs, and aiming to guide effective clinical practice. METHODS: In this systematic review with meta-analyses, a review of the literature was conducted in accordance with the Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) guidelines. A comprehensive literature search was conducted using Embase and PubMed for articles published between 1989 and 2023. Inclusion criteria targeted studies on open reduction and internal fixation mandibular fractures comparing intraoral and extraoral approaches and reporting infection rates. Exclusion criteria eliminated non-English articles, case reports, and studies with insufficient approach-specific data. The primary outcome was the postoperative infection rate, with surgical approach as the predictor. Covariates such as age, sex, diabetes, and smoking status were included when reported. Data were analyzed using R software, employing random-effects models due to anticipated heterogeneity (I2 statistics). RESULTS: From 61 studies, 11 provided direct comparisons involving 1,317 patients-937 intraoral and 380 extraoral. Infection rates were 5.9% for intraoral and 10% for extraoral approaches. Pooled relative risk was 0.94 [95% confidence interval, 0.63, 1.39], suggesting no significant risk difference. Prevalence of infections was estimated at 9% for intraoral and 6.1% for extraoral procedures, with significant heterogeneity (I2 = 84% for intraoral and 56% for extraoral). CONCLUSION: Our meta-analysis found no significant difference in infection rates between the two approaches. There is opportunity to expand on reporting complication rates comparing the various approaches to mandibular fixation. Until these data are presented, surgeon preference may dictate the operative approach to expose the mandible for reduction and fixation.

A Novel Method to Fix Paediatric Mandibular Fracture using 2-0 Polyglactin Suture: A Technical Note.

BACKGROUND: Reduction and stabilisation of fractures at the earliest is valuable in the paediatric age groups. This novel technique focuses on stabilisation of the fracture fragments using vicryl, which has an added advantage to conventional plating and wiring. This study aimed on a novel cost-effective technique of stabilising the paediatric mandibular fracture using 2-0 resorbable polyglactin 910 suture with minimal trauma to tooth buds and bone and adequate stability. TECHNIQUE: After raising a full-thickness mucoperiosteal flap, the fracture segments are identified and reduced. 1.6mm drill bit is used to make holes through the buccal cortex on either side of the fractured segment in an anteroposterior direction. The patency of holes is checked by passing a long 26-gauge wire. The proximal end of the wire is bent into a loop, a 2-0 resorbable polyglactin suture (vicryl) is passed through this loop and the loop is pressed in place to lock the suture. The wire with the attached suture is pulled through the distal end. Once the suture is secure in place, the 26G wire is cut, and the two ends of sutures are knotted and stabilised. The mucoperiosteal flap is then closed. CONCLUSION: A novel method of stabilisation of paediatric fracture without hampering the tooth and jaw growth, especially in the financially unstable population. 2-0 polyglactin 910 suture is cost-effective, $2 US, compared to resorbable plates costing about $150 US, and easily available. Polyglactin 910 takes 40-60 days for resorption, and half-life tensile strength is 2 weeks; thus, it gives adequate stability and time for callus formation and does not damage the tooth buds or bone by cutting through them.

Digitally driven surgical guide planning.

To investigate the role of a fully digital process in the surgical treatment of mandibular fractures in children. We analyzed a complete dataset from 22 children with mandibular fractures treated with digital surgical assistance. The patient's treatment process included preoperative thin layer CT (Computed Tomography) scanning, computer-aided design (3D reconstruction, virtual reduction, and internal fixation device determination and shaping), and 3D printing (jaw model, bite plate). We used occlusal and shaping plates during surgery to assist in fracture reduction and fixation. During the follow-up, we observed the occurrence of fracture healing, occlusal relationships, opening degrees, and complications in pediatric patients after surgery. Next, we used the 3D overlay function of MIMICS software to compare the preoperative surgical design with postoperative jaw imaging data to evaluate the overall surgical effect. The postoperative imaging data showed good fracture healing, normal occlusion during follow-up, and significant improvement in opening degrees. The mean preoperative opening degree was 23.59 ± 2.89 mm, and the mean postoperative opening degree was 29.82 ± 1.79 mm; there was a significant difference between these two parameters (p < 0.05). There were no complications such as tooth germ injury, nerve injury or fracture block displacement. The postoperative mandibular imaging data was imported into MIMICS software for 3D overlay visualization, and the postoperative mandibular morphology recovery was well-matched with the preoperative design. We measured the average upper deviation (0.65 ± 0.09) mm and the average lower deviation (-0.57 ± 0.14) mm. The fully digital process has a precise, minimally invasive, and safe effect in the surgical treatment of mandibular fractures in children, and the clinical effect is satisfactory.

Non-Surgical Site-Related Complications in Mandibular Fracture Surgery - A Problem of Elderly Patients?

BACKGROUND: Scientific evidence of nonsurgical site-related complications in mandibular fracture patients is limited. PURPOSE: The purpose was to measure the frequency of nonsurgical site complications in patients with mandible fractures, describe the types of complications, and identify the risk factors associated with these complications. STUDY DESIGN, SETTING, SAMPLE: A retrospective cohort study was conducted at the Helsinki University hospital between 2018 and 2021. Patients undergoing surgery with open reduction and internal fixation of mandibular fracture(s) were evaluated. Patients under 16 years of age were excluded. PREDICTOR VARIABLE: Primary predictor variable was age. Patient-related predictor variables were sex, long-term disease(s), smoking, and alcohol and/or drug abuse. Injury and fracture-related variables were injury mechanism, type and site of facture, combined craniofacial fracture(s), and associated injury(s). MAIN OUTCOME VARIABLE(S): The primary outcome variable was nonsurgical site-related postoperative complication. The secondary outcome variable was type of complication. COVARIATES: Not applicable. ANALYSES: The main outcome variable was cross tabulated for pairwise comparisons with predictor variables. Multivariate logistic regression was performed for statistically significant (P < .05) variables. RESULTS: The data included 314 patients (age range: 16 to 89 years; mean age: 38 years old; median age: 33 years old); most (78.3%) were men. Nonsurgical site-related postoperative complications occurred in 6.7% of patients. The most common complication type was pulmonary complication (36.0%), followed by urinary complication (20.0%) and general infection (16.0%). Nonsurgical site-related postoperative complications were most likely to occur in patients who were elderly (adjusted odds ratio [aOR] 5.55; 95% CI 1.92 to 16.21; P = .002), had combined craniofacial fractures (aOR 2.92; 95% CI 1.06 to 8.03; P = .038), and abused alcohol or drugs (aOR 4.51; 95% CI 1.70 to 11.96; P = .003). Pulmonary complications occurred more often in elderly patients, whereas urinary complications were more common in younger patients. CONCLUSIONS AND RELEVANCE: The types of nonsurgical site complications in mandibular fracture patients increase and vary according to the patient's age. Awareness of possible complications related to different age groups helps anticipate and identify these in clinical work, and to consider the overall treatment of the patient beyond the fracture.