Preparation and Characterization of a Lutein Solid Dispersion to Improve Its Solubility and Stability.

Lutein has been used as a dietary supplement for the treatment of eye diseases, especially age-related macular degeneration. For oral formulations, we investigated lutein stability in artificial set-ups mimicking different physiological conditions and found that lutein was degraded over time under acidic conditions. To enhance the stability of lutein upon oral intake, we developed enteric-coated lutein solid dispersions (SD) by applying a polymer, hydroxypropyl methylcellulose acetate succinate (HPMCAS-LF), through a solvent-controlled precipitation method. The SD were characterized in crystallinity, morphology, and drug entrapment. In the dissolution profile of lutein SD, a F80 formulation showed resistance toward the acidic environment under simulated gastric conditions while exhibiting a bursting drug release under simulated intestinal conditions. Our results highlight the potential use of HPMCAS-LF as an effective matrix to enhance lutein bioavailability during oral delivery and to provide novel insights into the eye-care supplement industry, with direct benefits for the health of patients.

Exploring the potential of tianeptine matrix tablets: Synthesis, physico-chemical characterization and acute toxicity studies.

The main objective of the present study was to explore the potential of matrix tablets as extended release dosage form of tianeptine, using HMPC K100 as a polymer. HPMC K100 extended the release of the drug from formulation due to the gel-like structure. Direct compression method was adopted to compress the tablets using different concentrations of polymer. Tablets were evaluated for pre-compression and post-compression parameters. Drug release study showed that tablet extends the release of drug with the increasing concentration of polymer. Drug, polymers and tablets were analyzed and/or characterized for compatibility, degradation, thermal stability, amorphous or crystalline nature via FTIR, DSC, TGA, XRD studies. SEM study predicted that tablets had a uniform structure. HPMC K100 based tablets were similar to that of the reference product. Acute toxicity study conducted on Swiss albino mice showed that matrix tablets were safe and non-toxic, as no changes in physical activity and functions of organs were observed. Biochemical and histopathological study revealed lack of any kind of abnormality in liver and renal function. Moreover, necrotic changes were absent at organ level.

Utility of Films to Anticipate Effect of Drug Load and Polymer on Dissolution Performance from Tablets of Amorphous Itraconazole Spray-Dried Dispersions.

Because spray-dried dispersion (SDD) performance depends on polymer selection and drug load, time- and resource-sparing methods to screen drug/polymer combinations before spray drying are desirable. The primary objective was to assess the utility of films to anticipate the effects of drug load and polymer grade on dissolution performance of tablets containing SDDs of itraconazole (ITZ). A secondary objective was to characterize the solid-state attributes of films and SDDs to explain drug load and polymer effects on dissolution performance. SDDs employed three different grades of hypromellose acetate succinate (i.e., either HPMCAS-L, HPMCAS-M, or HPMCAS-H). Solid-state characterization employed differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and solid-state nuclear magnetic resonance (ssNMR) spectroscopy. Results indicate that films correctly anticipated the effects of drug load and polymer on dissolution performance. The best dissolution profiles were observed under the following conditions: 20% drug loading performed better than 30% for both films and SDDs, and the polymer grade rank order was HPMCAS-L > HPMCAS-M > HPMCAS-H for both films and SDDs. No dissolution was detected from films or SDDs containing HPMCAS-H. Solid-state characterization revealed percent crystallinity and phase miscibility as contributing factors to dissolution, but were not the sole factors. Amorphous content in films varied with drug load (10% > 20% > 30%) and polymer grades (HPMCAS-L > HPMCAS-M > HPMCAS-H), in agreement with dissolution. In conclusion, films anticipated the rank-order effects of drug load and polymer grade on dissolution performance from SDDs of ITZ, in part through percent crystallinity and phase miscibility influences.

Water-Soluble Cellulose Derivatives as Suitable Matrices for Multifunctional Materials.

This work reports on a simple and environmentally benign route to prepare freestanding magnetic films based on cellulose derivatives through the combination of cobalt ferrite (CoFe2O4) nanoparticles with methyl cellulose (MC), hydroxypropyl cellulose (HPC), and sodium carboxymethyl cellulose (NaCMC). Nanoparticles are able to "shield" hydrogen bonding interactions between polysaccharide chains and lower the viscosity of water-dissolved MC, HPC, and NaCMC, allowing an easy film fabrication. Crack-free films with homogeneously dispersed nanoparticles having concentrations up to 50 wt % are fabricated by mechanical agitation followed by doctor blade casting. All of the nanocomposite films keep a substantial level of flexibility with elongation at break exceeding 5%. Halpin-Tsai equations serve to provide further insights on the character of matrix-CoFe2O4 interfaces. Magnetization saturation increases almost linearly with cobalt ferrite concentration up to a maximum value of ∼24-27 emu g-1 for nanocomposites containing 50 wt % of nanoparticles. The dielectric response of the films demonstrates a strong dependence on both the functional groups attached to the main cellulose chain and the ferrite nanoparticle content. The renewable character of the hosting matrices, together with the fabrication methods that solely uses water as a solvent, the decrease of the viscosity with the inclusion of fillers, particularly suitable for printable materials, and the resulting magnetic performance provide novel avenues for the replacement of traditional magnetoactive composites based on petroleum-derived polymers and avoiding the use of toxic solvents.

A Combined Utilization of Plasdone-S630 and HPMCAS-HF in Ziprasidone Hydrochloride Solid Dispersion by Hot-Melt Extrusion to Enhance the Oral Bioavailability and No Food Effect.

The purpose of this study was to research a novel combination of Plasdone-S630 and HPMCAS-HF as hot-melt carrier used in ziprasidone hydrochloride for enhanced oral bioavailability and dismissed food effect. Ziprasidone hydrochloride solid dispersion (ZH-SD) was prepared by hot-melt extrusion technique, and its optimized formulation was selected by the central composite design (CCD), which was characterized for powder X-ray diffraction (PXRD), fourier transform infrared spectroscopy (FTIR), in vitro dissolution study, and stability study. Finally, the in vivo study in fasted/fed state was carried out in beagle dogs. Based on PXRD analysis, HME technique successfully dispersed ziprasidone with a low crystallinity hydrochloride form in the polymers. According to the analysis of FTIR, hydrogen bonds were formed between drug and polymers during the process of HME. Without any noticeable bulk, crystalline could be found from the micrograph of ZH-SD when analyzed the result of scanning electron microscope (SEM). Pharmacokinetics studies indicated that the bioavailability of ZH-SD formulation had no significant difference in fasted and fed state, and the Cmax and AUC of ZH-SD were two fold higher than Zeldox® in fasted state. This result indicated that ziprasidone has achieved a desired oral bioavailability in fasted state and no food effect.

Influence of Polymers on the Physical and Chemical Stability of Spray-dried Amorphous Solid Dispersion: Dipyridamole Degradation Induced by Enteric Polymers.

Amorphous solid dispersions (ASDs) are inherently unstable because of high internal energy. Evaluating physical and chemical stability during the process and storage is essential. Numerous researches have demonstrated how polymers influence the drug precipitation and physical stability of ASDs, while the influence of polymers on the chemical stability of ASDs is often overlooked. Therefore, this study aimed to investigate the effect of polymers on the physical and chemical stability of spray-dried ASDs using dipyridamole (DP) as a model drug. Proper polymers were selected by assessing their abilities to inhibit drug recrystallization in supersaturated solutions. HPMC E5, Soluplus®, HPMCP-55, and HPMCAS-LP were shown to be effective stabilizers. The optimized formulations were further stored at a high temperature (60 °C) and high humidity (40 °C, 75% RH) for 2 months, and their physical and chemical stability was evaluated using polarizing optical microscopy, FTIR, HPLC, and mass spectrometry (MS). In general, crystallization was observed in all samples, which indicated the physical instability under stressed storage conditions. Also, it was noted that the polymers in ASDs rather than physical mixtures, induced a dramatic drug degradation after being exposed to a high temperature (HPMCP-55 > 80% and HPMCAS-LP > 50%) and high humidity (HPMCP-55 > 40% and HPMCAS-LP > 10%). The MS analysis further confirmed the degradation products, which might be generated from the reaction between dipyridamole and phthalic anhydride decomposed from HPMCP-55 and HPMCAS-LP. Overall, the exposure of ASDs to stressed conditions resulted in recrystallization and even the chemical degradation induced by polymers.

Formulation development and stability studies of norfloxacin extended-release matrix tablets.

The aim of this research was to develop a new hydrophilic matrix system containing norfloxacin (NFX). Extended-release tablets are usually intended for once-a-day administration with benefits to the patient and lower discontinuation of the therapy. Formulations were developed with hydroxypropylmethylcellulose or poly(ethylene oxide) as hydrophilic polymers, with different molecular weights (MWs) and concentrations (20 and 30%). The tablets were found to be stable (6 months at 40 ± 2°C and 75 ± 5% relative humidity), and the film-coating process is recommended to avoid NFX photodegradation. The dissolution profiles demonstrated an extended-release of NFX for all developed formulations. Dissolution curves analyzed using the Korsmeyer exponential equation showed that drug release was controlled by both drug diffusion and polymer relaxation or erosion mechanisms. A more erosion controlled system was obtained for the formulations containing lower MW and amount of polymer. With the increase in both MW and amount of polymer in the formulation, the gel layer became stronger, and the dissolution was more drug-diffusion dependent. Formulations containing intermediate MW polymers or high concentration (30%) of low MW polymers demonstrated a combination of extended and complete in vitro drug release. This way, these formulations could provide an increased bioavailability in vivo.

The influence of agitation sequence and ionic strength on in vitro drug release from hypromellose (E4M and K4M) ER matrices--the use of the USP III apparatus.

Theophylline extended release (ER) matrices containing hypromellose (hydroxypropyl methylcellulose (HPMC) E4M and K4M were evaluated in media with a pH range of 1.2-7.5, using an automated USP type III, Bio-Dis dissolution apparatus. The objectives of this study were to evaluate the effects of systematic agitation, ionic strength and pH on the release of theophylline from the gel forming hydrophilic polymeric matrices with different methoxyl substitution levels. Tribo-electric charging of hypromellose, theophylline and their formulated blends containing E4M and K4M grades has been characterised, along with quantitative observations of flow, compression behaviour and particle morphology. Agitations were studied at 5, 10, 15, 20, 25, 30 dips per minute (dpm) and also in the ascending and descending order in the dissolution vials. The ionic concentration strength of the media was also varied over a range of 0-0.4M to simulate the gastrointestinal fed and fasted states and various physiological pH conditions. To study the effect of ionic strength on the hydrophilic matrices, agitation was set at 20 dpm. The charge results on individual components imply that the positively charged particles have coupled with the negatively charged particles to form a stable ordered mixture which is believed to result in a more homogeneous and stable system. The particle shape analysis showed the HPMC K4M polymer to have a more irregular morphology and a rougher surface texture in comparison to the HPMC E4M polymer, possibly a contributory factor to the gelation process. The results showed gelation occurred quicker for the K4M tablet matrices. Drug release increased with increased agitation. This was more pronounced for the E4M tablet matrices. The ionic strength also had more of an effect on the drug release from the E4M matrices. The experiments highlighted the resilience of the K4M matrices in comparison with the E4M matrices. The results thus show that despite similar viscosities of E4M and K4M, the methoxyl substitution makes a difference to their control of drug release and as such care and consideration should be given to the choice of polymer used for extended release. The use of systematic change of agitation method and ionic strength may indicate potential fed and fasted effects on drug release from hydrophilic matrices.

Development of enteric submicron particles formulation of α-amylase for oral delivery.

Enteric submicron particles (SPs) formulations of α-amylase were prepared by w/o/w emulsion solvent evaporation using hydroxypropyl methylcellulose phthalate (HPMCP) and Eudragit L 100, to avoid gastric inactivation of α-amylase. Smaller internal and external aqueous phase volume provided maximum encapsulation efficiency (71.92-73.40%), least particle size (546.4-595.4 nm) and 23-26% loss of enzyme activity. Release studies in 0.1 N HCl confirmed the gastro-resistance of formulations. The anionic SPs aggregated in 0.1 N HCl (i.e. gastric pH 1.2), due to protonation of carboxylic groups of enteric polymer. The aggregates being < 500 µm size would not impede gastric emptying. However, at pH >5.0 (duodenal pH), SPs showed de-aggregation due to restoration of surface charge. HPMCP and Eudragit L 100 SPs facilitated almost complete release of α-amylase within 30 min at pH 6.0 and 6.8, respectively, following Higuchi kinetics. PXRD and DSC indicated amorphous character and scanning electron microscope showed spherical shape of SPs. In simulated gastro-intestinal pH condition, HPMCP and Eudragit L 100 SPs showed good digestion of cooked rice and could serve as potential carrier for oral enzyme delivery. Stability studies indicated the formulations as quite stable to ensure 2 years shelf life at room temperature.

2-O-Methyl- and 3,6-di-O-methyl-cellulose from natural cellulose: synthesis and structure characterization.

For the first time, 2-O-methyl- (2MC) and 3,6-di-O-methyl-cellulose (36MC) were synthesized via 3-O-allyl- and 3-O-methyl-cellulose, respectively. Position 6 of 3-O-allyl- and 3-O-methyl-cellulose was protected with the 4-methoxytrityl groups. The reaction time and temperature were optimized to achieve a high regioselectivity at C-6 and to prevent the introduction of the 4-methoxytrityl group at C-2 of the polymer. It was found that the substituent at C-3 of 3-O-functionalized celluloses influenced the reactivity of the hydroxyl group at C-6. The structure was characterized by means of (1)H and (13)C NMR spectroscopy of the acetates of 2MC and 36MC. 2MC and 36MC were soluble in water and did not show thermoreversible gelation.

Statistical approach for assessing the influence of calcium silicate and HPMC on the formulation of novel alfuzosin hydrochloride mucoadhesive-floating beads as gastroretentive drug delivery systems.

Multiparticulate floating drug delivery systems have proven potential as controlled-release gastroretentive drug delivery systems that avoid the "all or none" gastric emptying nature of single-unit floating dosage forms. An objective of the presence investigation was to develop calcium silicate (CaSi)/calcium alginate (Ca-Alg)/hydroxypropyl methylcellulose (HPMC) mucoadhesive-floating beads that provide time- and site-specific drug release of alfuzosin hydrochloride (Alf). Beads were prepared by simultaneous internal and external gelation method utilizing 3(2) factorial design as an experimental design; with two main factors evaluated for their influence on the prepared beads; the concentration of CaSi as floating aid (X (1)) and the percentage of HPMC as viscosity enhancer and mucoadhesive polymer (X (2)), each of them was tested in three levels. Developed formulations were evaluated for yield, entrapment efficiency, particle size, surface topography, and buoyancy. Differential scanning calorimetry, Fourier transform infrared spectroscopy, in vitro drug release, as well as in vitro mucoadhesion using rat stomach mucosal membrane were also conducted. Percentage yield and entrapment efficiency ranged from 57.03% to 78.51% and from 49.78% to 83.26%, respectively. Statistical analysis using ANOVA proved that increasing the concentration of either CaSi or HPMC significantly increased the beads yield. Both CaSi and HPMC concentrations were found to significantly affect Alf release from the beads. Additionally, higher CaSi concentration significantly increased the beads diameter while HPMC concentration showed significant positive effect on the beads mucoadhesive properties. CaSi/Ca-Alg/HPMC beads represent simple floating-mucoadhesive gastroretentive system that could be useful in chronopharmacotherapy of benign prostatic hyperplasia.

Interplay between gelation and phase separation in aqueous solutions of methylcellulose and hydroxypropylmethylcellulose.

Thermally induced gelation in aqueous solutions of methylcellulose (MC) and hydroxypropylmethylcellulose (HPMC) has been studied by rheological, optical microscopy, and turbidimetry measurements. The structural and mechanical properties of these hydrogels are dominated by the interplay between phase separation and gelation. In MC solutions, phase separation takes place almost simultaneously with gelation. An increase in the storage modulus is coupled to the appearance of a bicontinuous structure upon heating. However, a thermal gap exists between phase separation and gelation in the case of HPMC solutions. The storage modulus shows a dramatic decrease during phase separation and then rises in the subsequent gelation. A macroporous structure forms in the gels via "viscoelastic phase separation" linked to "double phase separation".

Thermosensitive hydrogel of hydrophobically-modified methylcellulose for intravaginal drug delivery.

Hydrogels with the advantages of prolonging drug release and administration convenience are necessary for intravaginal drug delivery to prevent sexual transmission of human immunodeficiency virus and other vaginal infections. In this study, the thermosensitive hydrogel of methylcellulose modified by stearic acid (MCS) were evaluated in the presence of NaCl and phosphates, which exhibited sol-to-gel transition performance at body temperature or even lower. The in vitro cytotoxicity and in vivo mucosal irritation were investigated and the results showed that MCS hydrogel possessed good biocompatibility similar with hydroxyethyl cellulose (HEC) gel. Significantly, the release studies revealed that MCS hydrogel could control tenofovir sustained release for 10 h without burst release, longer than that from HEC gel or poloxamer 407 hydrogel. Therefore, MCS thermosensitive hydrogel would be a promising carrier for intravaginal delivery of antiviral drugs for long time controlled release.

Development of potential novel cushioning agents for the compaction of coated multi-particulates by co-processing micronized lactose with polymers.

This work aimed to explore the potential of lactose as novel cushioning agents with suitable physicomechanical properties by micronization and co-spray drying with polymers for protecting coated multi-particulates from rupture when they are compressed into tablets. Several commercially available lactose grades, micronized lactose (ML) produced by jet milling, spray-dried ML (SML), and polymer-co-processed SMLs, were evaluated for their material characteristics and tableting properties. Hydroxypropylcellulose (HPC), hydroxypropylmethylcellulose (HPMC), and polyvinylpyrrolidone (PVP) at three different levels were evaluated as co-processed polymers for spray drying. Sugar multi-particulates layered with chlorpheniramine maleate followed by an ethylcellulose coat were tableted using various lactose types as fillers. Drug release from compacted multi-particulate tablets was used to evaluate the cushioning effect of the fillers. The results showed that the cushioning effect of lactose principally depended on its particle size. Micronization can effectively enhance the protective action of lactose. Although spray drying led to a small reduction in the cushioning effect of ML, it significantly improved the physicomechanical properties of ML. Co-spray drying with suitable polymers improved both the cushioning effect and the physicomechanical properties of SML to a certain degree. Among the three polymers studied, HPC was the most effective in terms of enhancing the cushioning effect of SML. This was achieved by reducing yield pressure, and enhancing compressibility and compactibility. The combination of micronization and co-spray drying with polymers is a promising method with which new applications for lactose can be developed.

Production and properties of nanocellulose-reinforced methylcellulose-based biodegradable films.

Methylcellulose (MC)-based films were prepared by casting from its 1% aqueous solution containing 0.5% vegetable oil, 0.25% glycerol, and 0.025% Tween 80. Puncture strength (PS), puncture deformation (PD), viscoelasticity coefficient, and water vapor permeability (WVP) were found to be 147 N/mm, 3.46 mm, 41%, and 6.34 g.mm/m(2).day.kPa, respectively. Aqueous nanocellulose (NC) solution (0.1-1%) was incorporated into the MC-based formulation, and it was found that PS was improved (117%) and WVP was decreased (26%) significantly. Films containing 0.25% NC were found to be the optimum. Then films were exposed to gamma radiation (0.5-50 kGy), and it was revealed that mechanical properties of the films were slightly decreased after irradiation, whereas barrier properties were further improved with a decrease of WVP to 28.8% at 50 kGy. Molecular interactions due to incorporation of NC were supported by FTIR spectroscopy. Thermal properties of the NC-containing films were improved, confirmed by TGA and DSC. Crystalline peaks appeared due to NC addition, found by XRD. Micrographs of films containing NC were investigated by SEM.

Hydroxypropylmethylcellulose films for prolonged delivery of the antipsychotic drug chlorpromazine.

OBJECTIVES: The aim of this study was to develop transdermal films based on hydroxypropylmethylcellulose with the purpose of improving transdermal permeation of chlorpromazine hydrochloride, an antipsychotic drug used to alleviate the symptoms and signs of psychosis. METHODS: Hydroxypropylmethylcellulose films were prepared and evaluated for their drug content, film thickness, residual water content and bioadhesive properties. In-vitro permeation experiments were performed in the absence and in the presence of permeation enhancers (oleic acid, polysorbate 80, or both) with the purpose of improving drug availability. Other formulative parameters, such as drug and plasticizer concentration and hydroxypropylmethylcellulose type, were investigated. KEY FINDINGS: Both oleic acid and polysorbate 80 had significant effect on drug permeation with respect to the control formulation. In particular films containing a mixture of oleic acid and polysorbate 80 provided the best enhancement activity for chlorpromazine. Moreover, a decrease in propylene glycol or chlorpromazine content or an increase of hydroxypropylmethylcellulose viscosity provided lower cumulative amounts of drug permeated. CONCLUSIONS: The results obtained confirm that chlorpromazine permeation can be easily modulated by varying the composition of hydroxypropylmethylcellulose-based films. These formulations could serve as candidates for transdermal delivery of antipsychotic drugs.

Polymer percolation threshold in HPMC extended release formulation of carbamazepine and verapamil HCl.

The principles of the percolation theory were applied to further understand and design hydroxypropyl methylcellulose (HPMC) extended release matrix tablets containing carbamazepine and verapamil HCl. This statistical theory studies disordered or chaotic systems where the components are randomly distributed in a lattice. The application of this theory to study the hydration and drug release of hydrophilic matrices allows describing the changes in hydration and drug release kinetics of swellable matrices. The aim of this work was to study and develop extended release matrix formulations for carbamazepine and verapamil HCl, containing hypromellose (HPMC, METHOCEL Premium K100M CR) as rate controlling polymer using the concepts of percolation theory. The knowledge of the percolation threshold of the components of the matrix formulations contributes to improve their design. First, reducing the time to market and second, avoiding to formulate in the nearby of the percolation threshold, which will result in a lower variability. Therefore these formulations will be more robust when they are prepared at industrial scale. The HPMC percolation threshold for drugs with very different water solubilities was determined and it was shown that there was no significant influence of drug solubility on the HPMC critical concentration threshold (excipient percolation threshold). This may be related to the versatility and broad functionality of the swelling hydrophilic matrices.

Dry coating of soft gelatin capsules with HPMCAS.

Dry coating is an innovative powder-layering technique that enables the formation of coatings on solid dosage forms with no need for using water or organic solvents. This technique envisages the distribution of polymer powder blends onto substrate cores and the concurrent or alternate nebulization of liquid plasticizers. In this work, a dry coating process based on hydroxypropyl methylcellulose acetate succinate (HPMCAS) was set up in a rotary fluid bed equipment to prepare enteric-coated soft gelatin capsules. Promising results were obtained in terms of process feasibility and product characteristics, thus suggesting the possibility of advantageous applications for the investigated technique when dealing with gelatin capsule substrates.

Syntheses and comparison of 2,6-di-O-methyl celluloses from natural and synthetic celluloses.

2,6-Di-O-methylcellulose was prepared from natural and synthetic celluloses. Natural cellulose was converted to 2,6-di-O-thexyldimethylsilylcellulose, then to 3-mono-O-allyl-2,6-di-O-methylcellulose, and finally into 2,6-di-O-methylcellulose. Alternatively, 2,6 di-O-methylcellulose was synthesized from the synthetic cellulose derivative 3-mono-O-benzyl-2,6-di-O-pivaloylcellulose by depivaloylation and methylation to give 3-mono-O-benzyl-2,6-di-O-methylcellulose, which was debenzylated to yield the dimethyl ether. Both types of 2,6-di-O-methylcellulose are insoluble in water and common organic solvents. The structures of all cellulose derivatives were determined by NMR.

Characterization of cellulosic hot-melt extruded films containing lidocaine.

Hot-melt extrusion technology was used to produce thin films containing a model drug, lidocaine, and the cellulosic polymers hydroxypropyl cellulose (HPC) and hydroxypropyl methyl cellulose (HPMC). Two film formulations were extruded and compared, one containing only HPC and the other containing HPC:HPMC (80:20). Thermal analysis of the films using differential scanning calorimetry (DSC) suggested that the drug existed in the amorphous condition, which was confirmed by wide angle X-ray diffractometry. Sustained release of the drug was observed from both of the polymer matrices. Dissolution profiles suggested that HPMC retarded the drug release from HPC:HPMC (80:20) films. However, the mechanism of drug release from both of the films was predominantly diffusion of the drug through the polymer matrices. Incorporation of HPMC also increased both adhesive strength and work of adhesion as compared to the HPC-only films.