Dispersive solid-phase extraction of racemic drugs using chiral ionic liquid-metal-organic framework composite sorbent.

Nowadays, enantioseparation of racemic pharmaceuticals in preparations is a prime concern by drug authorities across the globe. In the present work, it was attempted to develop novel enantioselective extraction method for five clinically used drugs (atenolol, propranolol, metoprolol, racecadotril, and raceanisodamine in their tablets) as racemates. The enantioselective solid-liquid extraction of these racemic drugs was carried out successfully by the use of chiral ionic liquid (CIL) in combination with a metal organic framework (MOF) for the first time. The composite CIL@MOF was synthesized from tropine based chiral ionic liquids with L-proline anion ([CnTr][L-Pro], n=3-6) and HKUST-1 type MOF, which was comprehensively characterized before being used as sorbent for enantioselective dispersive solid-liquid extraction. Preliminary selection of appropriate CIL was carried out on thin layer chromatography (TLC); under the joint participation of copper ion in the developing reagent, [C3Tr][L-Pro] ionic liquid showed better resolution performance with ΔRf value of 0.35 between the enantiomers was obtained for racemic atenolol. Moreover, the effect of copper salt dosage, amount of CIL, soli-liquid ratio and extraction time were investigated. The optimal conditions were obtained after thorough investigations; i.e. sample solution: ethanol, elution solvent: methanol, solid-liquid ratio: 12.5 mg:50 mL, amount of copper salt: 8 mg L-1, amount of impregnated CIL: 30% and extraction time of 30 min. As a result, enantiomeric excess values are 90.4%, 95%, 92%, 81.6% and 83.2% for atenolol, propranolol, metoprolol, racecadotril and raceanisodamine, respectively. The developed enantioselective method was validated following ICH guidelines and it was proved to be simple, effective and enantioselective way for separation of racemic pharmaceuticals with similar behaviors.

Graphene Oxide/Polyethylene Glycol-Stick for Thin Film Microextraction of ß-Blockers from Human Oral Fluid by Liquid Chromatography-Tandem Mass Spectrometry.

A wooden stick coated with a novel graphene-based nanocomposite (Graphene oxide/polyethylene glycol (GO/PEG)) is introduced and investigated for its efficacy in solid phase microextraction techniques. The GO/PEG-stick was prepared and subsequently applied for the extraction of ß-blockers, acebutolol, and metoprolol in human oral fluid samples, which were subsequently detected by liquid chromatography tandem mass spectrometry (LC-MS/MS). Experimental parameters affecting the extraction protocol including sample pH, extraction time, desorption time, appropriate desorption solvent, and salt addition were optimized. Method validation for the detection from oral fluid samples was performed following FDA (Food and Drug Administration) guidelines on bioanalytical method validation. Calibration curves ranging from 5.0 to 2000 nmol L-1 for acebutolol and 25.0 to 2000 nmol L-1 for metoprolol were used. The values for the coefficient of determination (R2) were found to be 0.998 and 0.996 (n = 3) for acebutolol and metoprolol, respectively. The recovery of analytes during extraction was 80.0% for acebutolol and 62.0% for metoprolol, respectively. The limit of detections (LODs) were 1.25, 8.00 nmol L-1 for acebutolol and metoprolol and the lower limit of quantifications (LLOQ) were 5.00 nmol L-1 for acebutolol and 25.0 nmol L-1 for metoprolol. Validation experiments conducted with quality control (QC) samples demonstrated method accuracy between 80.0% to 97.0% for acebutolol and from 95.0% to 109.0% for metoprolol. The inter-day precision for QC samples ranged from 3.6% to 12.9% for acebutolol and 9.5% to 11.3% for metoprolol. Additionally, the GO/PEG-stick was demonstrated to be reusable, with the same stick observed to be viable for more than 10 extractions from oral fluid samples.

Metal organic framework HKUST-1 modified with carboxymethyl-ß-cyclodextrin for use in improved open tubular capillary electrochromatographic enantioseparation of five basic drugs.

This work shows that the metal organic framework (MOF) HKUST-1 of type Cu3(BTC)2 (also referred to as MOF-199; a face-centered-cubic MOF containing nanochannels) is a most viable coating for use in enantioseparation in capillary electrochromatography (CEC). A HKUST-1 modified capillary was prepared and characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectra, elemental analysis and thermogravimetric analysis. CEC-based enantioseparation of the basic drugs propranolol (PRO), esmolol (ESM), metoprolol (MET), amlodipine (AML) and sotalol (SOT) was performed by using carboxymethyl-ß-cyclodextrin as the chiral selector. Compared with a fused-silica capillary, the resolutions are improved (ESM: 1.79; MET: 1.80; PRO: 4.35; SOT: 1.91; AML: 2.65). The concentration of chiral selector, buffer pH value, applied voltage and buffer concentration were optimized, and the reproducibilities of the migration times and Rs values were evaluated. Graphical abstract Schematic presentation of the preparation of a HKUST-1@capillary for enantioseparation of racemic drugs. Cu(NO3)2 and 1,3,5-benzenetricarboxylic acid (BTC) were utilized to prepare the HKUST-1@capillary. Then the capillary was applied to construct capillary electrochromatography system with carboxymethyl-ß-cyclodextrin (CM-ß-CD) for separation of basic racemic drugs.

Enantioseparation of chiral ß-blockers using polynorepinephrine-coated nanoparticles and chiral capillary electrophoresis.

A method of combining magnetic solid-phase separation (MSPE) and chiral capillary electrophoresis (CE) is developed for enantioseparation of trace amounts of ß-blockers. Polynorepinephrine-functionalized magnetic nanoparticles (polyNE-MNPs) are synthesized and applied to simultaneously extract three ß-blockers (carteolol, metoprolol, and betaxolol). The prepared polyNE-MNPs are spherical with a diameter of 198 ± 17 nm and the thickness of the polyNE coating is about 14 nm. PolyNE possesses abundant catechol hydroxyl and secondary amine groups, endowing the MNPs with excellent hydrophilicity. Under the optimum conditions, the extraction efficiencies of polyNE-MNPs for ß-blockers are in the range of 89.6 to 100%, with relative standard deviations (RSDs) below 3.5%. The extraction process can be finished in 4 min. Field-enhanced sample injection (FESI) in chiral CE is constructed to further enhance the sensitivities of ß-blocker enantiomers. The limits of detection for ß-blocker enantiomers by the FESI-CE with polyNE-MNPs are in the range of 0.401 to 1.59 ng mL-1. The practicability of this method in real samples is evaluated by analysis of human urine samples. The recoveries for each enantiomer of ß-blockers in the real samples range from 89.5 to 92.8%, with RSDs ranging from 0.37 to 5.9%. The whole detection process can be finished in less than 0.5 h. The method demonstrates its great potential in the pharmacokinetic and pharmacodynamic studies of chiral drugs in humans. Graphical abstract ᅟ.

Enantioseparation of propranolol, amlodipine and metoprolol by electrochromatography using an open tubular capillary modified with ß-cyclodextrin and poly(glycidyl methacrylate) nanoparticles.

The inner wall of a capillary was coated with glycidyl methacrylate (GMA) to form tentacle-type coating, and poly(glycidyl methacrylate) nanoparticles (PGMA NPs) were then immobilized on the film. Ethanediamine-ß-cyclodextrin as chiral selector was covalently bonded into the PGMA NPs through the ring-open reaction. The materials were characterized by SEM, TEM and FT-IR. The modified column was applied to the enantioseparation of the racemates of propranolol, amlodipine and metoprolol. Compared to a capillary with a single layer of CD-PGMA (without GMA coating) and to a CD-GMA system (without PGMA nanoparticles), the performance of the capillary is strongly improved. The effects of buffer pH value and applied voltage were optimized. Best resolutions (propranolol: 1.27, metoprolol: 1.01 and amlodipine: 2.93) were obtained when using the PGMA-coated capillary system. The run-to-run, day-to-day and column-to-column reproducibility were tested and found to be highly attractive. The new stationary phase is likely to have a large potential and scope in that it may also be applied to chiral separations of other enantiomers, such as amino acids and biogenic amines. Graphical abstract Schematic presentation of the preparation of a capillary column with glycidyl methacrylate (GMA) coating which was then immobilized with poly(glycidyl methacrylate) nanoparticles and ethanediamine-ß-cyclodextrin. This novel open tubular column was applied to construct capillary electrochromatography system for separation of basic racemic drugs.

Application of rifampicin as a chiral selector for enantioresolution of basic drugs using capillary electrophoresis.

Rifampicin, a member of rifamycin sub-class of antibiotics which belongs to the naphthalenic ansamycin class of antibiotics, has a characteristic ansa structure, i.e., a ring structure or chromophore spanned by an aliphatic chain. The present work was designed to evaluate its potential as a chiral selector (CS) as its structure consisting of nine stereogenic centers, an aromatic moiety and several functional groups (i.e., one imine, one amide, one acetoxy residue, two aliphatic hydroxyl and three phenolic hydroxyl groups) was expected to instigate multiple enantioselective interactions, namely, hydrogen bonding and inclusion complexation with chiral analytes, and therefore resulting in efficient enantioseparations. Systematic experiments were performed to investigate the effects of concentration of CS, composition of background electrolyte (BGE) and applied voltage on chiral separation. Enantiomers of propranolol and metoprolol were baseline resolved using a BGE consisting of 20mM CS and 50/50 (v/v) iso-propanol/phosphate buffer (100mM, pH 7.0) whereas for enantiomers of sertraline, a BGE consisting of 23mM CS and 40/60 (v/v) iso-propanol/phosphate buffer (100mM, pH 7.0) resulted in baseline resolutions.

Liquid chromatographic enantioseparation of three beta-adrenolytics using new derivatizing reagents synthesized from (S)-ketoprofen and confirmation of configuration of diastereomers.

Diastereomers of racemic ß-adrenolytic drugs [namely (RS)-propranolol, (RS)-metoprolol and (RS)-atenolol] were synthesized under microwave irradiation with (S)-ketoprofen based chiral derivatization reagents (CDRs) newly synthesized for this purpose. (S)-Ketoprofen was chosen for its high molar absorptivity (εo ~ 40,000) and its availability as a pure (S)-enantiomer. Its -COOH group was activated with N-hydroxysuccinimide and N-hydroxybenzotriazole; these were easily introduced and also acted as good leaving groups during nucleophilic substitution by the amino group of the racemic ß-adrenolytics. The CDRs were characterized by UV, IR, 1 H-NMR, HRMS and CHNS. Separation of diastereomers was achieved by RP HPLC and open column chromatography. Absolute configuration of the diastereomers was established with the help of 1 HNMR supported by developing their optimized lowest energy structures using Gaussian 09 Rev. A.02 program and hybrid density functional B3LYP with 6-31G* basis set (based on density functional theory), and elution order was established. RP HPLC conditions for separation were optimized and the separation method was validated. The limit of detection values were 0.308 and 0.302 ng mL-1 . Copyright © 2016 John Wiley & Sons, Ltd.

Identification, synthesis, isolation and characterization of new impurity in metoprolol tartrate tablets.

A new unknown impurity was observed in accelerated stability studies of Metoprolol tartrate tablets. This impurity has been identified, synthesized and characterized through different spectral studies and confirmed as an adduct of lactose and Metoprolol formed by Maillard reaction.

Graphite-based microextraction by packed sorbent for online extraction of ß-blockers from human plasma samples.

In the present work a new graphitic material (Carbon-XCOS) was used as a sorbent for microextraction by packed sorbent (MEPS). The ß-blockers metoprolol and acebutolol in plasma samples were extracted and detected online using Carbon-MEPS syringe and liquid chromatography and tandem mass spectrometry (LC-MS/MS). Factors affecting the MEPS performance such as conditioning, washing and elution solutions were investigated. The validation of the bioanalytical method was performed using human plasma. The standard curve ranged from 10 to 2000nM and the lower limit of quantification (LLOQ) was set to 10nM. The method validation showed good accuracy and precision for the quality control (QC) samples at three concentration levels (30, 800 and 1600nM). The accuracy values of the QC samples were in the range of 86-108% (n=18). The precision values of intra- and inter-day for QC samples ranged from 4.4% to 14.4% (RSD) for the both studied analytes. The coefficient of determination (R(2)) values were ≥0.999 (n=3).

Synthesis and characterization of modified carrageenan microparticles for the removal of pharmaceuticals from aqueous solutions.

In the present study, carrageenan microparticles were synthesized using spray-drying method and used as biosorbents for the removal of pharmaceutical compounds. The cross-linking reaction of iota-carrageenan (iCAR) and kappa-carrageenan (kCAR) with glutaraldehyde (GLA) at different concentrations (2.5% or 5% (w/w), mass of GLA per mass of CAR) was studied (iCAR/GLA2.5, iCAR/GLA5, kCAR/GLA2.5, kCAR/GLA5). The physicochemical properties of the novel cross-linked polymers were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). Swelling studies were in accordance with the polymer properties, showing the lowest swelling degree (19%) by using the iCAR/GLA5 microparticles. The optimal kCAR/GLA5 microparticles were successfully employed for the removal of Metoprolol (MTPL) from aqueous samples. The adsorption capacity of the adsorbents was investigated using a batch adsorption procedure and the kinetics and thermodynamics of the adsorption process were further investigated. It was found that the adsorption isotherms agree well with the Langmuir-Freundlich model. The maximum adsorption capacity (Qm) was achieved in pH 6, whereas an increase of Qm was observed increasing the temperature (from 109 at 20°C to 178 mg/g at 40°C). Kinetic studies showed that the adsorption process on iCAR/GLA5 microparticles followed pseudo-second-order rate mechanism. Finally, a new phenomenological model of the adsorption process was proposed in order to extract information on the relevant sub-processes.

Selective adsorption of metoprolol enantiomers using 2-hydroxypropyl-ß-cyclodextrin cross-linked multiwalled carbon nanotube.

This study investigates the ability of functionalized multiwalled carbon nanotubes (MWCNTs) for enantio-separation of metoprolol chiral forms. 2Hydroxypropyl-ß-cyclodextrin (2HP-ß-CD) was applied as a chiral selector to functionalize carbon nanotubes (CNTs). The modified multiwalled CNT samples were characterized using scanning electron microscopy and Fourier transform infrared spectroscopy. The results of analyses showed that CNTs were successfully cross-linked with 2HP-ß-CD. To evaluate the enantio-separation property of the products, the separation of metoprolol chiral forms on the initial and final products was examined. Further, UV-visible spectroscopy and polarimeter analyses were used for characterization. The results indicate that MWCNT does not have any intrinsic enantio-separation ability, although its selectivity for enantio-separation can be enhanced by cross-linking it to 2HP-ß-CD. Moreover, the optimal mass of adsorbent as well as optimal mass of functional groups is estimated to achieve maximum enantio-separation efficiency. The results indicate that applying large amounts of 2HP-ß-CD to CNTs functionalization decreases the cross-linking efficiency, which consequently reduces enantio-separation efficiency.

Sorption of the organic cation metoprolol on silica gel from its aqueous solution considering the competition of inorganic cations.

Systematic batch experiments with the organic monovalent cation metoprolol as sorbate and the synthetic material silica gel as sorbent were conducted with the aim of characterizing the sorption of organic cations onto charged surfaces. Sorption isotherms for metoprolol (>99% protonated in the tested pH of around 6) in competition with mono- and divalent inorganic cations (Na(+), NH4(+), Ca(2+), and Mg(2+)) were determined in order to assess their influence on cation exchange processes and to identify the role of further sorptive interactions. The obtained sorption isotherms could be described well by an exponential function (Freundlich isotherm model) with consistent exponents (about 0.8). In general, a decreasing sorption of metoprolol with increasing concentrations in inorganic cations was observed. Competing ions of the same valence showed similar effects. A significant sorption affinity of metoprolol with ion type dependent Freundlich coefficients KF,0.77 between 234.42 and 426.58 (L/kg)(0.77) could still be observed even at very high concentrations of competing inorganic cations. Additional column experiments confirm this behavior, which suggests the existence of further relevant interactions beside cation exchange. In subsequent batch experiments, the influence of mixtures with more than one competing ion and the effect of a reduced negative surface charge at a pH below the point of zero charge (pHPZC ≈ 2.5) were also investigated. Finally, the study demonstrates that cation exchange is the most relevant but not the sole mechanism for the sorption of metoprolol on silica gel.

Enantiomer separations of basic chiral compounds by capillary electrochromatography on a phosphated ß-cyclodextrin-modified zirconia monolith.

Phosphated ß-cyclodextrin (PCD)-coated zirconia monolith was used as the chiral stationary phase in capillary electrochromatography (CEC) for separation of four basic chiral compounds including metoprolol (MET), sertraline (SER), citalopram (CIT) and atenolol (ATE). Migration, chiral selectivity and resolution data were measured in reversed-phase mobile phases of varying pH, buffer and organic modifier compositions. Optimum mobile phase conditions for CEC separation of the compounds studied were found to be a 15-mM aqueous buffer of pH 5.0 with 5mM PCD. Baseline separations of enantiomers of CIT, MET and SER, and partial separation for ATE were achieved with the optimal mobile phase.

Photo-Fenton decomposition of ß-blockers atenolol and metoprolol; study and optimization of system parameters and identification of intermediates.

Active pharmaceutical compounds reach the wastewater treatment plants mainly through excretion and improper disposal, and, because of insufficient treating methods, they end up to surface water or even potable water in some cases. Atenolol and metoprolol are ß-blockers, members of cardiovascular pharmaceuticals group. They are generally used in the treatment of disorders such as hypertension, angina and arrhythmias. They have been in long-term use in Europe and North America, and they have also been detected in the aquatic environment. In this study the degradation of atenolol and metoprolol in aqueous solutions by means of the photo-Fenton reaction was investigated. The purpose of this study was: (i) to investigate the influence of the concentrations of iron and hydrogen peroxide, by means of central composite design, (ii) to study the degradation kinetics in aqueous solutions, (iii) to evaluate the mineralization and the toxicity evolution of the target compounds and (iv) to identify the degradation products. It has been found that increase of iron and hydrogen peroxide concentration accelerate the degradation of atenolol and metoprolol, while the kinetics of the process can be characterized as pseudo-first order. In general the photo-Fenton method has proved to be effective in decomposing and mineralizing the target compounds. The determination of the by-products formed during the degradation using LC-MS/MS equipment and the evaluation of the toxicity of the treated solution in different stages of the process would offer significant, innovative information regarding the treatment of water and wastewater containing active pharmaceutical compounds, especially of the ß-blocker group.

Microfluidic chip capillary electrophoresis coupled with electrochemiluminescence for enantioseparation of racemic drugs using central composite design optimization.

Optimization based on central composite design (CCD) for enantioseparation of anisodamine (AN), atenolol (AT), and metoprolol (ME) in human urine was developed using a microfluidic chip-CE device. Coupling the flexible and wide working range of microfluidic chip-CE device to CCD for chiral separation of AN, AT, and ME in human urine, a total of 15 experiments is needed for the optimization procedure as compared to 75 experiments using the normal one variable at a time optimization. The optimum conditions obtained are found to be more robust as shown by the curvature effects of the interaction factors. The developed microfluidic chip-CE-ECL system with adjustable dilution ratios has been validated by satisfactory recoveries (89.5-99% for six enanotiomers) in urine sample analysis. The working range (0.3-600 µM), repeatability (3.1-4.9% RSD for peak height and 4.0-5.2% RSD for peak area), and detection limit (0.3-0.6 µM) of the method developed are found to meet the requirements for bedside monitoring of AN, AT, and ME in patients under critical conditions. In summary, the hyphenation of CCD with the microfluidic chip-CE device is shown to offer a rapid means for optimizing the working conditions on simultaneous separation of three racemic drugs using the microfluidic chip-CE device developed.

Capillary electrophoresis assay method for metoprolol and hydrochlorothiazide in their combined dosage form with multivariate optimization.

The current manuscript reports the first capillary electrophoresis method for the separation and quantification of metoprolol (MET) and hydrochlorothiazide (HCT) in their combined dosage form. MET and HCT were detected at 240 and 214 nm, respectively, using a photodiode array detector. The univariate approach was used for optimizing voltage, injection time and capillary temperature. The factorial design with response surface plots, as a multivariate approach, was used to study the effect of buffer concentration and pH on resolution, peak area and migration time. The optimum conditions were 50 mmol/L phosphate at pH 9.5, injection time 10.0 s, voltage 25 kV and capillary temperature 25°C. The method was linear in the range of 2.5-250 µg/mL for both drugs with correlation coefficients above 0.9997. Additionally, acceptable recovery of the contents of MET and HCT in their formulations (96.0-100.3%) with acceptable precision (1.38-2.60 %) were achieved. Moreover, the limits of detection of MET and HCT were 0.02 and 0.01 µg/mL, respectively, which were suitable for pharmaceutical analysis.

[Chiral separation of five beta-blockers using di-n-hexyl L-tartrate-boric acid complex as mobile phase additive by reversed-phase liquid chromatography].

A reversed-phase high performance liquid chromatographic (HPLC) method using the di-n-hexyl L-tartrate-boric acid complex as a chiral mobile phase additive was developed for the enantioseparation of five beta-blockers including propranolol, esmolol, metoprolol, bisoprolol and sotalol. In order to obtain a better enantioseparation, the influences of concentrations of di-n-butyl L-tartrate and boric acid, the type, concentration and pH of the buffer, methanol content as well as the molecular structure of analytes were extensively investigated. The separation of the analytes was performed on a Venusil MP-C18 column (250 mm x 4.6 mm, 5 microm). The mobile phase was 15 mmol/L ammonium acetate-methanol containing 60 mmol/L boric acid, 70 mmol/L di-n-hexyl L-tartrate (pH 6.00). The volume ratios of 15 mmol/L ammonium acetate to methanol were 20: 80 for propranolol, esmolol, metoprolol, bisoprolol and 30: 70 for sotalol. The flow rate was 0.5 mL/min and the detection wavelength was set at 214 nm. Under the optimized conditions, baseline enantioseparation was obtained separately for the five pairs of analytes.

Rapid and sensitive LC-MS/MS method for the determination of metoprolol in Beagle dog plasma with a simple protein precipitation treatment and its pharmacokinetic applications.

A rapid LC-MS/MS method with good accuracy and sensitivity was developed and validated for the pharmacokinetics study of metoprolol (MP) in beagle dogs. The plasma samples were simply precipitated by methanol and then analyzed by LC-MS/MS. An Ultimate XB-C18 column (150 × 2.1 mm ID, 5 µm) was used for separation, with methanol-water containing 0.2% formic acid (65:35, v/v) as the mobile phase at a flow rate of 0.2 mL/min. Monitoring ions of MP and internal standard (hydroxypioglitazone) were m/z 268.1/115.6 and m/z 373.1/150.2, respectively. The linear range was 3.03-416.35 ng/mL with an average correlation coefficient of 0.9996, and the limit of quantification was 3.03 ng/mL. The intra- and inter-day precision was less than 15%. At low, middle and high concentrations, the recovery, the matrix effect and the accuracy was in the range of 76.06%-95.25%, 93.67%-104.19% and 95.20%-99.96% respectively. The method was applied for the pharmacokinetics study of MP tartrate tablets (50 mg). The AUC(0-t), T(max) and C(max) were respectively 919.88 ± 195.67 µg/L·h, 0.96 ± 0.33 h, 349.12 ± 78.04 ng/mL.

Application of a novel solid-phase-extraction sampler and ultra-performance liquid chromatography quadrupole-time-of-flight mass spectrometry for determination of pharmaceutical residues in surface sea water.

In the present study, a multi-residue method based on a bag-solid phase extraction (bag-SPE) technique was evaluated for determination of 10 pharmaceuticals in surface water close to the effluent of a sewage treatment plant (STP) and along a coastal gradient from a STP effluent. The 10 compounds selected were caffeine, atenolol, metoprolol, oxazepam, carbamazepine, ketoprofen, naproxen, ibuprofen, diclofenac and gemfibrozil. All analyses were performed using ultra-performance liquid chromatography (UPLC) combined with quadrupole time-of-flight (QTOF) mass spectrometry. The detection limits (LOD) ranged from 1.0 to 13 ng L(-1). The method showed linear concentration ranges from 25 to 800 ng L(-1) with regression coefficients (R(2)) better than 0.9801. The recoveries of the selected analytes ranged from 11 to 65% with relative standard deviations (RSD) of <16% and inter-day variations of less than 18%. Isotopically labeled surrogate standards were used to compensate for sampling losses and matrix effects. Four of the selected 10 pharmaceuticals (caffeine, metoprolol, oxazepam and carbamazepine) were quantified, at concentrations ranging from 4 to 210 ng L(-1).

Kinetics of aqueous chlorination of some pharmaceuticals and their elimination from water matrices.

Apparent rate constants for the reactions of four selected pharmaceutical compounds (metoprolol, naproxen, amoxicillin, and phenacetin) with chlorine in ultra-pure (UP) water were determined as a function of the pH. It was found that amoxicillin (in the whole pH range 3-12), and naproxen (in the low pH range 2-4) presented high reaction rates, while naproxen (in the pH range 5-9), and phenacetin and metoprolol (in the pH range 2.5-12 for phenacetin, and 3-10 for metoprolol) followed intermediate and slow reaction rates. A mechanism is proposed for the chlorination reaction, which allowed the evaluation of the intrinsic rate constants for the elementary reactions of the ionized and un-ionized species of each selected pharmaceutical with chlorine. An excellent agreement is obtained between experimental and calculated rate constants by this mechanism.The elimination of these substances in several waters (a groundwater, a surface water from a public reservoir, and two effluents from municipal wastewater treatment plants) was also investigated at neutral pH. The efficiency of the chlorination process with respect to the pharmaceuticals elimination and the formation THMs was also established. It is generally observed that the increasing presence of organic and inorganic matter in the water matrices demand more oxidant agent (chlorine), and therefore, less chlorine is available for the oxidation of these compounds. Finally, half-life times and oxidant exposures (CT) required for the removal of 99% of the four pharmaceuticals are also evaluated. These parameters are useful for the establishment of safety chlorine doses in oxidation or disinfection stages of pharmaceuticals in treatment plants.