RESUMEN
Flavonoid compounds are known for their antibacterial, anti-inflammatory, and anticancer properties. Therefore, they can influence membrane properties that interest us, modifying both their structure and functions. We used kaempferol (K) and myricetin (M) as representatives of this group. We investigated the influence of the abovementioned compounds on model cell membranes' properties (i.e., Langmuir monolayers and liposomes). The basic research methods used in these studies were the Langmuir method with Brewster angle microscopy and microelectrophoresis. The π-A isotherms were registered for the pure components and mixtures of these compounds with phosphatidylcholine (PC) in appropriate volume ratios. Using mathematical equations, we established that kaempferol, myricetin, and the lipids formed complexes at 1:1 ratios. We derived the parameters characterizing the formed complexes, i.e., the surfaces occupied by the complexes and the stability constants of the formed complexes. Using the microelectrophoretic method, we determined the dependence of the lipid membranes' surface charge density as a function of the pH (in the range of 2 to 10) of the electrolyte solution. The presented results indicate that the PC membrane's modification with kaempferol or myricetin affected changes in the surface charge density and isoelectric point values.
Asunto(s)
Derivados de Alilbenceno/farmacología , Dioxolanos/farmacología , Electroforesis/métodos , Quempferoles/farmacología , Membranas Artificiales , Microquímica/métodos , Fosfatidilcolinas/química , Liposomas Unilamelares/química , Derivados de Alilbenceno/química , Difusión , Dioxolanos/química , Concentración de Iones de Hidrógeno , Quempferoles/química , Microscopía de Polarización/métodos , Presión , Refractometría , Electricidad Estática , Propiedades de Superficie , Tensoactivos , ViscosidadRESUMEN
Colorimetric methods are convenient for the determination of inorganic phosphate. However, the acidic conditions required can complicate measurement of ATPase through non-enzymatic ATP hydrolysis. Here we present an optimized antimony-phosphomolybdate microassay for the simple and rapid detection of ATPase activity, with micromolar sensitivity. The low acidity of the color reagent results in no interference for samples containing up to 0.5-5 mM ATP, dependent on the sample volume. The assay is compatible with common assay conditions and was similar in accuracy to an established continuous method. The simplicity of this method makes it ideal for medium to high throughput applications.
Asunto(s)
Adenosina Trifosfatasas/análisis , Adenosina Trifosfatasas/química , Antimonio/química , Ensayos Analíticos de Alto Rendimiento/métodos , Microquímica/métodos , Molibdeno/química , Fosfatos/análisis , Ácidos Fosfóricos/química , Adenosina Trifosfatasas/metabolismo , Colorimetría/métodosRESUMEN
Coagulation assays, prothrombin time (PT), and partial thromboplastin time (PTT) are tests to measure the clotting ability of plasma and used in evaluating patients suffering from bleeding disorders. These assays require 100âµl of human plasma. In zebrafish, dilute plasma with exogenously added human fibrinogen was used. Our objective is to create a microkinetic coagulation assay for human and zebrafish plasmas using 1âµl plasma under conditions similar to PT and PTTs. Here, we developed an assay using the Take3 plate with wells holding up to 6âµl, which can be loaded in a microplate reader for measuring the absorbance of fibrin formation. In this assay, we used 1âµl of citrated zebrafish or human plasma followed by the addition of either thromboplastin or Dade ACTIN or factor X activator from Russell viper venom as an activating agent and CaCl2. We found 4 or 3âµl of the final volume of reaction was optimal. Our results showed both zebrafish and human plasmas yielded kinetic PT, kinetic PTT, and kinetic Russel's viper venom time curves similar to previously established curves using dilute plasma. This kinetic coagulation was inhibited by heparin and was reduced significantly in coagulation factor deficient plasmas. These results validated our microkinetic coagulation assays. Moreover, we derived clotting times from these kinetic curves, which were identical to human PT, PTT, and Russel's viper venom time. In conclusion, we established a microkinetic assay that could measure blood coagulation activity in models like zebrafish and human blood samples obtained from a finger prick in adults or heel prick in infants.
Asunto(s)
Pruebas de Coagulación Sanguínea/instrumentación , Coagulación Sanguínea/inmunología , Microquímica/métodos , Tiempo de Tromboplastina Parcial/métodos , Plasma/metabolismo , Tiempo de Protrombina/métodos , Animales , Humanos , Masculino , Pez CebraRESUMEN
O/W nanoemulsions are isotropic colloidal systems constituted of oil droplets dispersed in continuous aqueous media and stabilised by surfactant molecules. Nanoemulsions hold applications in more widespread technological domains, more crucially in the pharmaceutical industry. Innovative nanoemulsion-based drug delivery system has been suggested as a powerful alternative strategy through the useful means of encapsulating, protecting, and delivering the poorly water-soluble bioactive components. Consequently, there is a need to generate an emulsion with small and consistent droplets. Diverse studies acknowledged that ultrasonic cavitation is a feasible and energy-efficient method in making pharmaceutical-grade nanoemulsions. This method offers more notable improvements in terms of stability with a lower Ostwald ripening rate. Meanwhile, a microstructured reactor, for instance, microchannel, has further been realised as an innovative technology that facilitates combinatorial approaches with the acceleration of reaction, analysis, and measurement. The recent breakthrough that has been achieved is the controlled generation of fine and monodispersed multiple emulsions through microstructured reactors. The small inner dimensions of microchannel display properties such as short diffusion paths and high specific interfacial areas, which increase the mass and heat transfer rates. Hence, the combination of ultrasonic cavitation with microstructures (microchannel) provides process intensification of creating a smaller monodispersed nanoemulsion system. This investigation is vital as it will then facilitate the creation of new nanoemulsion based drug delivery system continuously. Following this, the fabrication of microchannel and setup of its combination with ultrasound was conducted in the generation of O/W nanoemulsion, as well as optimisation to analyse the effect of varied operating parameters on the mean droplet diameter and dispersity of the nanoemulsion generated, besides monitoring the stability of the nanoemulsion. Scanning transmission electron microscopy (STEM) images were also carried out for the droplet size measurements. In short, the outcomes of this study are encouraging, which necessitates further investigations to be carried out to advance a better understanding of coupling microchannel with ultrasound to produce pharmaceutical-grade nanoemulsions.
Asunto(s)
Emulsiones/química , Microquímica/instrumentación , Nanoestructuras/química , Aceite de Palma/química , Ultrasonido/métodos , Agua/química , Hexosas/química , Microquímica/métodos , Sonicación/métodos , TensoactivosRESUMEN
BACKGROUND: Δ9-Tetrahydrocannabinol (THC) is already considered one of the most addictive substances since an increasing number of consumers/abusers of THC and THC based products are observed worldwide. In this work, the capabilities of a novel miniaturized and portable MicroNIR spectrometer were investigated in order to propose a practical and intelligible test allowing the rapid and easy screening of Δ9-Tetrahydrocannabinol (THC) oral fluids without any pretreatment. METHODS: Specimens from volunteers were collected in order to consider any sources of variability in the spectral response and spiked with increasing amount of THC in order to realize predictive models to be used in real cases. Partial Least Square-Discriminant Analysis (PLS-DA) and Partial Least Square regression (PLSr) for the simultaneously detection and quantification of THC, were applied to baseline corrected spectra pre-treated by first derivative transform. RESULTS: Results demonstrated that MicroNIR/Chemometric platform is statistically able to identify THC abuse in simulated oral fluid samples containing THC from 10 to 100â¯ng/ml, with a precision and a sensitivity of about 1.51% and 0.1% respectively. CONCLUSIONS: The coupling MicroNIR/Chemometrics permits to simplify THC abuse monitoring for roadside drug testing or workplace surveillance and provides the rapid interpretation of results, as once the model is assessed, it can be used to process real samples in a "click-on" device.
Asunto(s)
Dronabinol/análisis , Microquímica/métodos , Saliva/química , Espectroscopía Infrarroja Corta/métodos , Detección de Abuso de Sustancias/métodos , Adolescente , Adulto , Analgésicos no Narcóticos/análisis , Líquidos Corporales/química , Femenino , Cromatografía de Gases y Espectrometría de Masas/métodos , Cromatografía de Gases y Espectrometría de Masas/normas , Humanos , Masculino , Microquímica/normas , Persona de Mediana Edad , Miniaturización/métodos , Miniaturización/normas , Espectroscopía Infrarroja Corta/normas , Detección de Abuso de Sustancias/normas , Factores de Tiempo , Adulto JovenRESUMEN
We demonstrate the use of accelerated reactions with desorption electrospray ionization mass spectrometry (DESI-MS) as a tool for predicting the outcome of microfluidic reactions. DESI-MS was employed as a high throughput experimentation tool to provide qualitative predictions of reaction outcomes, so that vast regions of chemical reactivity space may be more rapidly explored and areas of optimal efficiency identified. This work is part of a larger effort to accelerate reaction optimization to enable the rapid development of continuous-flow syntheses of small molecules in high yield. In order to build confidence in this approach, however, it is necessary to establish a robust predictive connection between reactions performed under analogous DESI-MS, batch, and microfluidic reaction conditions. In the present work, we explore the potential of high throughput DESI-MS experiments to identify trends in reactivity based on chemical structure, solvent, temperature, and stoichiometry that are consistent across these platforms. N-alkylation reactions were used as the test case due to their ease of reactant and product detection by electrospray ionization mass spectrometry (ESI-MS) and their great importance in API synthesis. While DESI-MS narrowed the scope of possibilities for reaction selection among some parameters such as solvent, others like stoichiometry and temperature still required further optimization under continuous synthesis conditions. DESI-MS high throughput experimentation (HTE) reaction evaluation significantly reduced the search space for flow chemistry optimization, thus representing a significant savings in time and materials to achieve a desired transformation with high efficiency.
Asunto(s)
Técnicas de Química Sintética/métodos , Microquímica/métodos , Técnicas Analíticas Microfluídicas/métodos , Espectrometría de Masa por Ionización de Electrospray/métodos , Alquilación , Compuestos de Anilina/síntesis química , Compuestos de Anilina/química , Técnicas de Química Sintética/instrumentación , Diseño de Equipo , Dispositivos Laboratorio en un Chip , Microquímica/instrumentación , Técnicas Analíticas Microfluídicas/instrumentación , Espectrometría de Masa por Ionización de Electrospray/instrumentaciónRESUMEN
As an important natural polysaccharide biomaterial from marine organisms, alginate and its derivatives have shown great potential in the fabrication of biomedical materials such as tissue engineering, cell biology, drug delivery, and pharmaceuticals due to their excellent biological activity and controllable physicochemical properties. Ionic crosslinking is the most common method used in the preparation of alginate-based biomaterials, but ionic crosslinked alginate hydrogels are prone to decompose in physiological solution, which hinders their applications in biomedical fields. In this study, dual crosslinked alginate hydrogel microfibers were prepared for the first time. The ionic crosslinked methacrylated alginate (Alg-MA) hydrogel microfibers fabricated by Microfluidic Fabrication (MFF) system were exposed to ultraviolet (UV) light and covalent crosslink between methacrylate groups avoided the fracture of dual crosslinked macromolecular chains in organizational environment. The chemical structures, swelling ratio, mechanical performance, and stability were investigated. Cell-encapsulated dual crosslinked Alg-MA hydrogel microfibers were fabricated to explore the application in tissue engineering for the first time. The hydrogel microfibers provided an excellent 3D distribution and growth conditions for cells. Cell-encapsulated Alg-MA microfibers scaffolds with functional 3D tissue structures were developed which possessed great potential in the production of next-generation scaffolds for tissue engineering and regenerative medicine.
Asunto(s)
Alginatos/química , Materiales Biocompatibles/química , Hidrogeles/síntesis química , Ingeniería de Tejidos/métodos , Alginatos/efectos de la radiación , Técnicas de Química Sintética/métodos , Hidrogeles/efectos de la radiación , Metacrilatos/química , Metacrilatos/efectos de la radiación , Microquímica/métodos , Técnicas Analíticas Microfluídicas , Andamios del Tejido/química , Rayos UltravioletaRESUMEN
Measuring mitochondrial respiration in brain tissue is very critical in understanding the physiology and pathology of the central nervous system. Particularly, measurement of respiration in isolated mitochondria provides the advantage over the whole cells or tissues as the changes in respiratory function are intrinsic to mitochondrial structures rather than the cellular signaling that regulates mitochondria. Moreover, a high-throughput technique for measuring mitochondrial respiration minimizes the experimental time and the sample-to-sample variation. Here, we provide a detailed protocol for measuring respiration in isolated brain non-synaptosomal mitochondria using Agilent Seahorse XFe24 Analyzer. We optimized the protocol for the amount of mitochondria and concentrations of ADP, oligomycin, and trifluoromethoxy carbonylcyanide phenylhydrazone (FCCP) for measuring respiratory parameters for complex I-mediated respiration. In addition, we measured complex II-mediated respiratory parameters. We observed that 10 µg of mitochondrial protein per well, ADP concentrations ranging between 2.5 and 10 mmol/L along with 5 µmol/L of oligomycin, and 5 µmol/L of FCCP are ideal for measuring the complex I-mediated respiration in isolated mouse brain mitochondria. Furthermore, we determined that 2.5 µg of mitochondrial protein per well is ideal for measuring complex II-mediated respiration. Notably, we provide a discussion of logical analysis of data and how the assay could be utilized to design mechanistic studies for experimental stroke. In conclusion, we provide detailed experimental design for measurement of various respiratory parameters in isolated brain mitochondria utilizing a novel high-throughput technique along with interpretation and analysis of data.
Asunto(s)
Encéfalo/metabolismo , Fluorometría/métodos , Ensayos Analíticos de Alto Rendimiento/métodos , Microquímica/métodos , Mitocondrias/metabolismo , Oximetría/métodos , Consumo de Oxígeno , Adenosina Difosfato/farmacología , Animales , Encéfalo/ultraestructura , Carbonil Cianuro p-Trifluorometoxifenil Hidrazona/farmacología , Complejo I de Transporte de Electrón/metabolismo , Complejo II de Transporte de Electrones/metabolismo , Fluorometría/instrumentación , Ensayos Analíticos de Alto Rendimiento/instrumentación , Concentración de Iones de Hidrógeno , Masculino , Ratones , Ratones Endogámicos C57BL , Microquímica/instrumentación , Mitocondrias/efectos de los fármacos , Membranas Mitocondriales/efectos de los fármacos , Membranas Mitocondriales/metabolismo , Proteínas Mitocondriales/análisis , ATPasas de Translocación de Protón Mitocondriales/antagonistas & inhibidores , Oligomicinas/farmacología , Fosforilación Oxidativa , Oximetría/instrumentación , Oxígeno/análisis , Consumo de Oxígeno/efectos de los fármacos , ProtonesRESUMEN
Preparation of high-quality sequencing libraries is a costly and time-consuming component of metagenomic next generation sequencing (mNGS). While the overall cost of sequencing has dropped significantly over recent years, the reagents needed to prepare sequencing samples are likely to become the dominant expense in the process. Furthermore, libraries prepared by hand are subject to human variability and needless waste due to limitations of manual pipetting volumes. Reduction of reaction volumes, combined with sub-microliter automated dispensing of reagents without consumable pipette tips, has the potential to provide significant advantages. Here, we describe the integration of several instruments, including the Labcyte Echo 525 acoustic liquid handler and the iSeq and NovaSeq Illumina sequencing platforms, to miniaturize and automate mNGS library preparation, significantly reducing the cost and the time required to prepare samples. Through the use of External RNA Controls Consortium (ERCC) spike-in RNAs, we demonstrated the fidelity of the miniaturized preparation to be equivalent to full volume reactions. Furthermore, detection of viral and microbial species from cell culture and patient samples was also maintained in the miniaturized libraries. For 384-well mNGS library preparations, we achieved cost savings of over 80% in materials and reagents alone, and reduced preparation time by 90% compared to manual approaches, without compromising quality or representation within the library.
Asunto(s)
Secuenciación de Nucleótidos de Alto Rendimiento/métodos , Metagenómica/métodos , Microquímica/métodos , Análisis de Secuencia de ARN/métodos , Automatización de Laboratorios , Ahorro de Costo , Estudios de Factibilidad , Secuenciación de Nucleótidos de Alto Rendimiento/economía , Secuenciación de Nucleótidos de Alto Rendimiento/instrumentación , Metagenómica/economía , Metagenómica/instrumentación , Microquímica/economía , Microquímica/instrumentación , Análisis de Secuencia de ARN/economía , Análisis de Secuencia de ARN/instrumentaciónRESUMEN
This review describes briefly the high rate of counterfeiting of antimicrobial drugs with focus upon its immediate health consequences. The major part of this review encompasses accounts of the improvements achieved in the domain of miniaturization of capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C4D). The application of this principle into the development of portable devices as well as its application to counter the health-system-crippling phenomenon of counterfeit antibiotic formulations, are discussed in the context of developing countries.
Asunto(s)
Antibacterianos/análisis , Medicamentos Falsificados/análisis , Fraude/prevención & control , Tecnología Química Verde/métodos , Microquímica/métodos , Países en Desarrollo/economía , Conductividad Eléctrica , Electroforesis Capilar/economía , Electroforesis Capilar/instrumentación , Electroforesis Capilar/métodos , Electroforesis Capilar/tendencias , Fraude/economía , Tecnología Química Verde/economía , Tecnología Química Verde/instrumentación , Tecnología Química Verde/tendencias , Microquímica/economía , Microquímica/instrumentación , Microquímica/tendencias , Sensibilidad y EspecificidadRESUMEN
Protein-polymer microcapsules have attracted much attention, due to their special features and potential in biological use. How to make the most of this type of bio-abiotic hybrid material is an intriguing question. Nevertheless, several unsatisfactory technical issues significantly limited the application of these materials. For instance, introducing various biomolecules and crosslinking for the capsules remains challenging and problematic. In this report, recombinant mCherry protein was covalently linked with poly(N-isopropylacrylamide) (PNIPAAm) to form amphiphilic protein-polymer conjugates, which assembled into microcapsules. These microcapsules are thermoresistant and can be used in the polymerase chain reaction (PCR). In this setting, the reactant molecules can be readily and easily introduced into the microcapsules, and crosslinking and water-oil phase transition are not necessary. This protein-polymer microcapsule PCR system has potential in various biological applications.
Asunto(s)
Resinas Acrílicas/química , Proteínas Luminiscentes/química , Microquímica/métodos , Reacción en Cadena de la Polimerasa/métodos , Cápsulas , Modelos Moleculares , Aceites/química , Proteínas Recombinantes/química , Suspensiones , Proteína Fluorescente RojaRESUMEN
This review summarizes recent developments, applications, and innovations of capillary electrophoretically mediated microanalysis methods. As a follow up of an earlier review, it covers the literature from early 2015 to early 2017. This article is divided into three parts. In the first part, different types of mixing procedures and applications of enzyme mediated microanalysis are discussed; the second part summarizes immobilized enzyme reactors (IMERs), while the third part deals with recent advances in on-line derivatization reactions.
Asunto(s)
Electroforesis Capilar/métodos , Enzimas Inmovilizadas/química , Electroforesis Capilar/instrumentación , Ensayos Analíticos de Alto Rendimiento/métodos , Espectrometría de Masas/métodos , Microquímica/métodos , Propiedades de SuperficieRESUMEN
We report peptide vesicles with chiral membranes as enantioselective nanoreactors. The peptide vesicles are able to selectively encapsulate only a single enantiomer from a racemic mixture solution through preferential diffusion across the membranes. Notably, the confined space of the vesicle acts as an enantioselective nanoreactor for the encapsulated enantiomer which undergoes further chemical transformations to yield a highly enantiopure product.
Asunto(s)
Membranas Artificiales , Microquímica/métodos , Nanoestructuras/química , Nanotecnología/métodos , Péptidos/química , Secuencia de Aminoácidos , Modelos Moleculares , Nanoestructuras/ultraestructura , Conformación Proteica en Hélice alfa , EstereoisomerismoAsunto(s)
Biomarcadores/análisis , Lágrimas/química , Investigación Biomédica Traslacional , Humanos , Inflamación/diagnóstico , Inflamación/metabolismo , Lípidos/análisis , Metaloproteinasa 9 de la Matriz/análisis , Microquímica/instrumentación , Microquímica/métodos , Concentración Osmolar , Osmometria/instrumentación , Osmometria/métodos , Sistemas de Atención de PuntoRESUMEN
The Fast Micromethod is a rapid and convenient microplate procedure for the determination of DNA integrity in cell suspensions and in solid tissues. The procedure is based on the ability of fluorochromes to preferentially interact with double-stranded DNA in alkaline conditions. Rapid sample lysis is followed by denaturation at high pH during 15 min. Only 30 ng of DNA from cell suspensions or tissue homogenates per single well are required for the analyses. The whole analysis is performed within 3 h or less (for one 96-well microplate).The Fast Micromethod is broadly used in biology and medicine. Its applications range from environmental pollution tests in marine invertebrates to the analysis of biopsy samples in cancer patients to detect DNA alterations caused by irradiation or chemotherapy.The procedure presented here describes the Fast Micromethod applied for the determination of DNA integrity in cell suspensions (HeLa cells) and solid tissues (mussel gills).
Asunto(s)
Bivalvos/genética , Daño del ADN , ADN/análisis , Colorantes Fluorescentes/química , Microquímica/métodos , Animales , Branquias/metabolismo , Células HeLa , Humanos , Concentración de Iones de Hidrógeno , SuspensionesRESUMEN
Heart failure (HF) continues to have a sufficient impact on morbidity, mortality, and disability in developed countries. Growing evidence supports the hypothesis that microparticles (MPs) might contribute to the pathogenesis of the HF development playing a pivotal role in the regulation of the endogenous repair system, thrombosis, coagulation, inflammation, immunity, and metabolic memory phenomenon. Therefore, there is a large body of data clarifying the predictive value of MP numerous in circulation among subjects with HF. Although the determination of MP signature is better than measurement of single MP circulating level, there is not yet close confirmation that immune phenotype of cells produced MPs are important for HF prediction and development. The aim of the chapter is to summarize knowledge regarding the role of various MPs in diagnosis and prognosis of HF. The role of MPs as a delivery vehicle for drugs attenuated cardiac remodeling is considered.
Asunto(s)
Insuficiencia Cardíaca/diagnóstico , Microquímica/métodos , Enfermedad Crónica , HumanosRESUMEN
Escherichia coli, Saccharomyces cerevisiae, and Pichia pastoris are the standard platforms for biopharmaceutical production with 40% of all between 2010 to 2014 approved protein drugs produced in those microbial hosts. Typically, products overexpressed E. coli and S. cerevisiae remain in the cytosol or are secreted into the periplasm. Consequently, efficient cell disruption is essential for high product recovery during microbial production. Process development platforms at microscale are essential to shorten time to market. While high-pressure homogenization is the industry standard for cell disruption at large scale this method is not practicable for experiments in microscale. This review describes microscale methods for cell disruption at scales as low as 200 µL. Strategies for automation, parallelization and miniaturization, as well as comparability of the results at this scale to high pressure homogenization are considered as those criteria decide which methods are most suited for scale down. Those aspects are discussed in detail for protein overexpression in E. coli and yeast but also the relevance for alternative products and host such as microalgae are taken into account. The authors conclude that bead milling is the best comparable microscale method to large scale high-pressure homogenization and therefore the most suitable technique for automated process development of microbial hosts with the exception of pDNA production.
Asunto(s)
Microquímica/métodos , Tecnología Farmacéutica/métodos , Automatización , Escherichia coli/citología , Escherichia coli/metabolismo , Ingeniería Metabólica , Pichia/citología , Pichia/metabolismo , Saccharomyces cerevisiae/citología , Saccharomyces cerevisiae/metabolismoRESUMEN
Pesticide residue in fruits & vegetables is one of the key issues affecting the export of rural products in India. Pesticide exposure or intake causes major nervous system problems in children. The solutions to quantitate them in field are rare and the pesticide residue detection in the parts per billion (ppb) ranges is challenging. Except ELISA, none of the existing methods can detect pesticide residues in ppb range in the field. We employed a new approach of concentrating field samples and used sodium polyacrylate (SPA) as water absorbing material. The SPA beads concentrate the field samples and obtained a sub ppb range detection using an existing FPIA system and could improve overall sensitivity by 10-100 fold. The developed assay can be done in few seconds. We have used three pesticides 2,4-D, atrazine and methyl parathion with 0.1, 0.5 and 3 ppb detection limit respectively. We developed a simple field ready FPIA device and used sodium poly acrylate (SPA) in this biochemical FPIA to enhance sensitivity. Our tests with spiked field samples offers a possibility of using SPA concentration assisted FPIA in field. This study will have far reaching applications of both qualitative & quantitative analysis chemical analytes in field samples.
Asunto(s)
Resinas Acrílicas/química , Monitoreo del Ambiente/métodos , Contaminantes Ambientales/análisis , Inmunoensayo de Polarización Fluorescente/métodos , Microquímica/métodos , Residuos de Plaguicidas/análisis , Absorción Fisiológica , Contaminantes Ambientales/química , Residuos de Plaguicidas/química , Reproducibilidad de los Resultados , Sensibilidad y EspecificidadRESUMEN
There has been an intense research for developing techniques that can produce filaments with helical shapes, given the widespread of potential applications. In this work, how helices with different curvatures can be precisely imprinted in microfilaments is shown. It is also shown that using this technique, it is possible to produce, in a single fiber, helices with different curvatures. This striking and innovative behavior is observed when one side of the stretched filaments is irradiated with UV light, modifying the mechanical properties at surface. Upon release, the regions with higher curvature start to curl first, while regions with lower intrinsic curvature remain stretched until start to curl later. The results presented here can be important to understand why structures adopt a helical shape in general, which can be of interest in nanotechnology, biomolecular science, or even to understand why plant filaments curl.
Asunto(s)
Microquímica/métodos , Impresión Molecular , Elasticidad , NanotecnologíaRESUMEN
Chemical composition and shape determine the basic properties of any object. Commonly, chemical synthesis and shaping follow each other in a sequence, although their combination into a single process would be an elegant simplification. Here, a pathway of simultaneous synthesis and shaping as applied to polysiloxanes on the micro- and nanoscale is presented. Complex structures such as stars, chalices, helices, volcanoes, rods, or combinations thereof are obtained. Varying the shape-controlling reaction parameters including temperature, water saturation, and the type of substrate allows to direct the reaction toward specific structures. A general mechanism of growth is suggested and analytical evidence and thermodynamic calculations to support it are provided. An aqueous droplet in either gaseous atmosphere or in a liquid organic solvent serves as a spatially confined polymerization volume. By substituting the starting materials, germanium-based nanostructures are also obtained. This transferability marks this approach as a major step toward a generally applicable method of chemical synthesis including in situ shaping.