RESUMEN
The biological function of macromolecular complexes depends not only on large-scale transitions between conformations, but also on small-scale conformational fluctuations at equilibrium. Information on the equilibrium dynamics of biomolecular complexes could, in principle, be obtained from local resolution (LR) data in cryo-electron microscopy (cryo-EM) maps. However, this possibility had not been validated by comparing, for a same biomolecular complex, LR data with quantitative information on equilibrium dynamics obtained by an established solution technique. In this study we determined the cryo-EM structure of the minute virus of mice (MVM) capsid as a model biomolecular complex. The LR values obtained correlated with crystallographic B factors and with hydrogen/deuterium exchange (HDX) rates obtained by mass spectrometry (HDX-MS), a gold standard for determining equilibrium dynamics in solution. This result validated a LR-based cryo-EM approach to investigate, with high spatial resolution, the equilibrium dynamics of biomolecular complexes. As an application of this approach, we determined the cryo-EM structure of two mutant MVM capsids and compared their equilibrium dynamics with that of the wild-type MVM capsid. The results supported a previously suggested linkage between mechanical stiffening and impaired equilibrium dynamics of a virus particle. Cryo-EM is emerging as a powerful approach for simultaneously acquiring information on the atomic structure and local equilibrium dynamics of biomolecular complexes.
Asunto(s)
Aminoácidos , Cápside , Microscopía por Crioelectrón , Sustancias Macromoleculares , Aminoácidos/química , Cápside/química , Microscopía por Crioelectrón/métodos , Conformación Proteica , Sustancias Macromoleculares/química , Virus Diminuto del Ratón/química , Virus Diminuto del Ratón/genéticaRESUMEN
In recent years, high temperature short time (HTST) treatment technology has been increasingly adopted for medium treatment to mitigate the potential risk of viral contamination in mammalian cell culture GMP manufacturing facilities. Mouse minute virus (MMV), also called minute virus of mice (MVM), implicated in multiple viral contamination events is commonly used as a relevant model virus to assess the effectiveness of HTST treatment of cell culture media. However, results from different studies vary broadly in inactivation kinetics as well as log reduction factors (LRFs) achieved under given treatment conditions. To determine whether the reported discrepancies stemmed from differences in MMV strains, laboratory-scale HTST devices, medium matrices, and/or experimental designs, we have taken a collaborative approach to systematically assess the effectiveness of HTST treatment for MMV inactivation. This effort was conceptualized based on a media treatment gap analysis conducted by the Consortium on Adventitious Agent Contamination in Biomanufacturing (CAACB) under the MIT Center for Biomedical Innovation (CBI). Specifically, two different MMV strains were used to evaluate the effectiveness of HTST at various treatment conditions with regard to exposure temperature and hold time duration by two independent laboratories within two different companies. To minimize experimental variations, the two sites used the same batches of MMV stocks, the same commercially purchased medium, and the same model of thermocyclers as the laboratory-scale HTST device. The two independent laboratories yielded similar MMV inactivation kinetics and comparable LRF. No significant differences were observed between the two MMV strains evaluated, suggesting that the variations from prior studies were likely due to differences in equipment, medium matrices, or other factors. The data presented here indicate that MMV inactivation by HTST treatment obeys first-order kinetics and can be mathematically modeled using an Arrhenius equation. The model-based extrapolation provides a quantitative estimate of MMV inactivation by the current industry standard HTST condition (102°C for a hold time of 10 s) used for medium treatment. Finally, based on the data from the current study and the industry experience, it is recommended that any alternative virus barrier technologies adopted for medium treatment should provide a clearance of at least 3.0 LRF based on a worst-case model virus to effectively mitigate potential risks of viral contamination.
Asunto(s)
Calor , Virus Diminuto del Ratón/química , Inactivación de Virus , Animales , Línea Celular Transformada , Humanos , Ratones , Factores de TiempoRESUMEN
Constant flux virus filtration experiments were conducted to evaluate minute virus of mice retention behavior of four commercial virus filters for continuous bioprocessing applications. Fluxes chosen were guided by the Peclet number and the processing logistics as well as based on the filter characteristics. At the low flux condition of 5 LM-2H-1 (LMH) when diffusive force dominates, a significant breakthrough was observed for all the filtrate fractions for the filtration of a low fouling monoclonal antibody for three of the four filters. When both diffusive and convective forces are equally important at 40 LMH, virus breakthrough in buffer chase was observed only in one of the four filters investigated. When convective force dominates at 60 LMH or above, a high degree of virus clearance was observed for all three parvovirus filters investigated. Our work shed light on virus clearance during constant flux virus filtration for future continuous biomanufacturing.
Asunto(s)
Anticuerpos Monoclonales/química , Virus Diminuto del Ratón/química , Animales , Filtración , RatonesRESUMEN
Multi-column capture chromatography (MCC) has gained increased attention lately due to the significant economic and process-related advantages it offers compared to traditional batch mode chromatography. However, for wide adoption of this technology in the clinical and commercial space, it requires scalable models for viral validation. In this study, additional viral validation studies were conducted under cGLP guidelines to assess retro-(X-MuLV) and parvo-virus (minute virus of mice) clearance across twin-column continuous capture chromatography (CaptureSMB) to supplement work previously performed. A surrogate model was validated using standard batch mode chromatography equipment based on flow path modifications to mimic the loading strategy employed in CaptureSMB. In addition, aged resin was used in this surrogate format to assess the impact of resin lifetime on viral clearance during continuous capture operation. The impact of column loading was also explored to shed light on the viral clearance mechanisms of protein A chromatography in overloading conditions. The proposed approach greatly simplifies MCC virus validation studies, and provides a robust strategy for regulatory filing of continuous biomanufacturing processes.
Asunto(s)
Anticuerpos Monoclonales , Virus de la Leucemia Murina/química , Virus Diminuto del Ratón/química , Animales , Anticuerpos Monoclonales/química , Anticuerpos Monoclonales/aislamiento & purificación , Células CHO , Cromatografía , Cricetulus , RatonesRESUMEN
Anion-exchange chromatography (AEX) is used in the downstream purification of monoclonal antibodies to remove impurities and potential viral contamination based on electrostatic interactions. Although the isoelectric point (pI) of viruses is considered a key factor predicting the virus adsorption to the resin, the precise molecular mechanisms involved remain unclear. To address this question, we compared structurally homologous parvoviruses that only differ in their surface charge distribution. A single charged amino acid substitution on the capsid surface of minute virus of mice (MVM) provoked an increased apparent pI (pIapp ) 6.2 compared to wild-type MVM (pIapp = 4.5), as determined by chromatofocusing. Despite their radically different pIapp , both viruses displayed the same interaction profile in Mono Q AEX at different pH conditions. In contrast, the closely related canine parvovirus (pIapp = 5.3) displayed a significantly different interaction at pH 5. The detailed structural analysis of the intricate three-dimensional structure of the capsids suggests that the charge distribution is critical, and more relevant than the pI, in controlling the interaction of a virus with the chromatographic resin. This study contributes to a better understanding of the molecular mechanisms governing virus clearance by AEX, which is crucial to enable robust process design and maximize safety.
Asunto(s)
Virus Diminuto del Ratón/química , Virus Diminuto del Ratón/aislamiento & purificación , Animales , Línea Celular Tumoral , Cromatografía por Intercambio Iónico , Punto Isoeléctrico , RatonesRESUMEN
Icosahedral viruses are under a micrometer in diameter, their infectious genome encapsulated by a shell assembled by a multiscale process, starting from an integer multiple of 60 viral capsid or coat protein (VP) monomers. We predict and validate inter-atomic hotspot interactions between VP monomers that are important for the assembly of 3 types of icosahedral viral capsids: Adeno Associated Virus serotype 2 (AAV2) and Minute Virus of Mice (MVM), both T = 1 single stranded DNA viruses, and Bromo Mosaic Virus (BMV), a T = 3 single stranded RNA virus. Experimental validation is by in-vitro, site-directed mutagenesis data found in literature. We combine ab-initio predictions at two scales: at the interface-scale, we predict the importance (cruciality) of an interaction for successful subassembly across each interface between symmetry-related VP monomers; and at the capsid-scale, we predict the cruciality of an interface for successful capsid assembly. At the interface-scale, we measure cruciality by changes in the capsid free-energy landscape partition function when an interaction is removed. The partition function computation uses atlases of interface subassembly landscapes, rapidly generated by a novel geometric method and curated opensource software EASAL (efficient atlasing and search of assembly landscapes). At the capsid-scale, cruciality of an interface for successful assembly of the capsid is based on combinatorial entropy. Our study goes all the way from resource-light, multiscale computational predictions of crucial hotspot inter-atomic interactions to validation using data on site-directed mutagenesis' effect on capsid assembly. By reliably and rapidly narrowing down target interactions, (no more than 1.5 hours per interface on a laptop with Intel Core i5-2500K @ 3.2 Ghz CPU and 8GB of RAM) our predictions can inform and reduce time-consuming in-vitro and in-vivo experiments, or more computationally intensive in-silico analyses.
Asunto(s)
Proteínas de la Cápside , Cápside , Ensamble de Virus/genética , Cápside/química , Cápside/metabolismo , Proteínas de la Cápside/química , Proteínas de la Cápside/genética , Proteínas de la Cápside/metabolismo , Simulación por Computador , Dependovirus/química , Dependovirus/genética , Dependovirus/metabolismo , Virus Diminuto del Ratón/química , Virus Diminuto del Ratón/genética , Virus Diminuto del Ratón/metabolismo , Mutagénesis Sitio-DirigidaRESUMEN
Viral safety is required for biological products to treat human diseases, and the burden of inactivation and or virus removal lies on the downstream purification process. Minute virus of mice (MVM) is a nonenveloped parvovirus commonly used as the worst-case model virus in validation studies because of its small size and high chemical stability. In this study, we investigated the use of MVM-mock virus particle (MVP) and bacteriophage ΦX174 as surrogates for MVM to mimic viral clearance studies, with a focus on chromatography operations. Based on structural models and comparison of log reduction value among MVM, MVP, and ΦX174, it was demonstrated that MVP can be used as a noninfectious surrogate to assess viral clearance during process development in multiple chromatography systems in a biosafety level one (BSL-1) laboratory. Protein A (ProA) chromatography was investigated to strategically assess the impact of the resin, impurities, and the monoclonal antibody product on virus removal.
Asunto(s)
Anticuerpos Monoclonales/química , Bacteriófagos/aislamiento & purificación , Virus Diminuto del Ratón/aislamiento & purificación , Virión/aislamiento & purificación , Animales , Anticuerpos Monoclonales/efectos adversos , Anticuerpos Monoclonales/uso terapéutico , Bacteriófagos/química , Cromatografía , Humanos , Ratones , Virus Diminuto del Ratón/química , Virión/química , Virión/inmunologíaRESUMEN
Viral contamination is an inherent risk during the manufacture of biopharmaceuticals. As such, biopharmaceutical companies must demonstrate the viral clearance efficacy of their downstream process steps prior to clinical trials and commercial approval. This is accomplished through expensive and logistically challenging spiking studies, which utilize live mammalian viruses. These hurdles deter companies from analyzing viral clearance during process development and characterization. We utilized a noninfectious minute virus of mice-mock virus particle (MVM-MVP) as a surrogate spiking agent during small scale viral filtration (VF) and anion exchange chromatography (AEX) studies. For VF experiments, in-process mAb material was spiked and processed through Asahi Kasei P15, P20, P35, and BioEX nanofilters. Across each filter type, flux decay profiles and log reduction values (LRVs) were nearly identical for either particle. For AEX experiments, loads were conditioned with various amounts of sodium chloride (9, 20, 23, and 41 mS/cm), spiked with either particle and processed through a Q-SFF packed column. LRV results met our expectations of predicting MVM removal.
Asunto(s)
Cromatografía por Intercambio Iónico , Filtración , Virus Diminuto del Ratón/aislamiento & purificación , Aniones , Virus Diminuto del Ratón/química , Cloruro de Sodio/química , Virión/químicaRESUMEN
A combined pore blockage and cake filtration model was applied to the virus filtration of an Fc-fusion protein using the three commercially available filters, F-1, F-2, and F-3 in a range of buffer conditions including sodium-phosphate and tris-acetate buffers with and without 200 mM NaCl at pH 7.5. The fouling behaviors of the three filters for the feed solutions spiked with minute virus of mice were described well by this combined model for all the solution conditions. This suggests that fouling of the virus filters is dominated by the pore blockage mechanism during the initial stage of the filtration and transformed to the cake filtration mechanism during the later stage of the filtration. Both flux and transmembrane resistance can be described well by this model. The pore blockage rate and the rate of increase of protein layer resistance over blocked pores are found to be affected by membrane properties as well as the solution conditions resulting from the modulation of interactions between virus, protein, and membrane by the solution conditions.
Asunto(s)
Filtración , Fragmentos Fc de Inmunoglobulinas/química , Virus Diminuto del Ratón/aislamiento & purificación , Animales , Tampones (Química) , Ratones , Virus Diminuto del Ratón/química , Proteínas Recombinantes de Fusión/químicaRESUMEN
Multicolumn capture chromatography is gaining increased attention lately due to the significant economic and process advantages it offers compared with traditional batch mode chromatography. However, for wide adoption of this technology in clinical and commercial space, it requires scalable models for executing viral validation studies. In this study, viral validation studies were conducted under cGLP guidelines to assess retro- (X-MuLV) and parvo-virus (MVM) clearance across twin-column continuous capture chromatography (CaptureSMB). A surrogate model was also developed using standard batch mode chromatography based on flow path modifications to mimic the loading strategy used in CaptureSMB. The results show that a steady state was achieved by the second cycle for both antibody binding and virus clearance and that the surrogate model using batch mode chromatography equipment provided impurity clearance that was comparable to that obtained during cyclical operation of CaptureSMB. Further, the log reduction values (LRVs) achieved during CaptureSMB were also comparable to the LRVs obtained using standard batch capture chromatography. This was expected since the mode of virus separation during protein A chromatography is primarily based on removal during the flow through and wash steps. Finally, this study also presents assessments on the resin cleaning strategy during continuous chromatography and how the duration of clean-in-place solution exposure impacts virus carryover.
Asunto(s)
Virus de la Leucemia Murina/química , Virus Diminuto del Ratón/química , Modelos Químicos , Inactivación de Virus , Cromatografía Liquida , Proteína Estafilocócica A/químicaRESUMEN
LuIII, a protoparvovirus pathogenic to rodents, replicates in human mitotic cells, making it applicable for use to kill cancer cells. This virus group includes H-1 parvovirus (H-1PV) and minute virus of mice (MVM). However, LuIII displays enhanced oncolysis compared to H-1PV and MVM, a phenotype mapped to the major capsid viral protein 2 (VP2). This suggests that within LuIII VP2 are determinants for improved tumor lysis. To investigate this, the structure of the LuIII virus-like-particle was determined using single particle cryo-electron microscopy and image reconstruction to 3.17 Å resolution, and compared to the H-1PV and MVM structures. The LuIII VP2 structure, ordered from residue 37 to 587 (C-terminal), had the conserved VP topology and capsid morphology previously reported for other protoparvoviruses. This includes a core ß-barrel and α-helix A, a depression at the icosahedral 2-fold and surrounding the 5-fold axes, and a single protrusion at the 3-fold axes. Comparative analysis identified surface loop differences among LuIII, H-1PV, and MVM at or close to the capsid 2- and 5-fold symmetry axes, and the shoulder of the 3-fold protrusions. The 2-fold differences cluster near the previously identified MVM sialic acid receptor binding pocket, and revealed potential determinants of protoparvovirus tumor tropism.
Asunto(s)
Virus Oncolíticos/química , Virus Oncolíticos/ultraestructura , Parvovirus/química , Parvovirus/ultraestructura , Animales , Cápside/química , Cápside/ultraestructura , Proteínas de la Cápside/química , Microscopía por Crioelectrón/métodos , Parvovirus H-1/química , Parvovirus H-1/ultraestructura , Humanos , Procesamiento de Imagen Asistido por Computador , Imagenología Tridimensional , Ratones , Virus Diminuto del Ratón/química , Virus Diminuto del Ratón/ultraestructura , Modelos MolecularesRESUMEN
Viral clearance is a critical aspect of biopharmaceutical manufacturing process validation. To determine the viral clearance efficacy of downstream chromatography and filtration steps, live viral "spiking" studies are conducted with model mammalian viruses such as minute virus of mice (MVM). However, due to biosafety considerations, spiking studies are costly and typically conducted in specialized facilities. In this work, we introduce the concept of utilizing a non-infectious MVM virus-like particle (MVM-VLP) as an economical surrogate for live MVM during process development and characterization. Through transmission electron microscopy, size exclusion chromatography with multi-angle light scattering, chromatofocusing, and a novel solute surface hydrophobicity assay, we examined and compared the size, surface charge, and hydrophobic properties of MVM and MVM-VLP. The results revealed that MVM and MVM-VLP exhibited nearly identical physicochemical properties, indicating the potential utility of MVM-VLP as an accurate and economical surrogate to live MVM during chromatography and filtration process development and characterization studies.
Asunto(s)
Virus Diminuto del Ratón/química , Virus Diminuto del Ratón/aislamiento & purificación , Animales , Ratones , Virus Diminuto del Ratón/ultraestructuraRESUMEN
Single-molecule experimental techniques and theoretical approaches reveal that important aspects of virus biology can be understood in biomechanical terms at the nanoscale. A detailed knowledge of the relationship in virus capsids between small structural changes caused by single-point mutations and changes in mechanical properties may provide further physics-based insights into virus function; it may also facilitate the engineering of viral nanoparticles with improved mechanical behavior. Here, we used the minute virus of mice to undertake a systematic experimental study on the contribution to capsid stiffness of amino acid side chains at interprotein interfaces and the specific noncovalent interactions they establish. Selected side chains were individually truncated by introducing point mutations to alanine, and the effects on local and global capsid stiffness were determined using atomic force microscopy. The results revealed that, in the natural virus capsid, multiple, mostly hydrophobic, side chains buried along the interfaces between subunits preserve a comparatively low stiffness of most (S2 and S3) regions. Virtually no point mutation tested substantially reduced stiffness, whereas most mutations increased stiffness of the S2/S3 regions. This stiffening was invariably associated with reduced virus yields during cell infection. The experimental evidence suggests that a comparatively low stiffness at S3/S2 capsid regions may have been biologically selected because it facilitates capsid assembly, increasing infectious virus yields. This study demonstrated also that knowledge of individual amino acid side chains and biological pressures that determine the physical behavior of a protein nanoparticle may be used for engineering its mechanical properties.
Asunto(s)
Aminoácidos/metabolismo , Proteínas de la Cápside/química , Proteínas de la Cápside/metabolismo , Virus Diminuto del Ratón/química , Virus Diminuto del Ratón/patogenicidad , Infecciones por Parvoviridae/virología , Aminoácidos/química , Virus Diminuto del Ratón/aislamiento & purificación , Virus Diminuto del Ratón/fisiologíaRESUMEN
Understanding the fundamental principles underlying supramolecular self-assembly may facilitate many developments, from novel antivirals to self-organized nanodevices. Icosahedral virus particles constitute paradigms to study self-assembly using a combination of theory and experiment. Unfortunately, assembly pathways of the structurally simplest virus capsids, those more accessible to detailed theoretical studies, have been difficult to study experimentally. We have enabled the in vitro self-assembly under close to physiological conditions of one of the simplest virus particles known, the minute virus of mice (MVM) capsid, and experimentally analyzed its pathways of assembly and disassembly. A combination of electron microscopy and high-resolution atomic force microscopy was used to structurally characterize and quantify a succession of transient assembly and disassembly intermediates. The results provided an experiment-based model for the reversible self-assembly pathway of a most simple (T = 1) icosahedral protein shell. During assembly, trimeric capsid building blocks are sequentially added to the growing capsid, with pentamers of building blocks and incomplete capsids missing one building block as conspicuous intermediates. This study provided experimental verification of many features of self-assembly of a simple T = 1 capsid predicted by molecular dynamics simulations. It also demonstrated atomic force microscopy imaging and automated analysis, in combination with electron microscopy, as a powerful single-particle approach to characterize at high resolution and quantify transient intermediates during supramolecular self-assembly/disassembly reactions. Finally, the efficient in vitro self-assembly achieved for the oncotropic, cell nucleus-targeted MVM capsid may facilitate its development as a drug-encapsidating nanoparticle for anticancer targeted drug delivery.
Asunto(s)
Cápside/metabolismo , Cápside/ultraestructura , Microscopía de Fuerza Atómica , Virus Diminuto del Ratón/metabolismo , Virus Diminuto del Ratón/ultraestructura , Simulación de Dinámica Molecular , Ensamble de Virus , Cápside/química , Microscopía Electrónica , Virus Diminuto del Ratón/química , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
Electrostatics is one of the fundamental driving forces of the interaction between biomolecules in solution. In particular, the recognition events between viruses and host cells are dominated by both specific and non-specific interactions and the electric charge of viral particles determines the electrostatic force component of the latter. Here we probe the charge of individual viruses in liquid milieu by measuring the electrostatic force between a viral particle and the Atomic Force Microscope tip. The force spectroscopy data of co-adsorbed Ï29 bacteriophage proheads and mature virions, adenovirus and minute virus of mice capsids is utilized for obtaining the corresponding density of charge for each virus. The systematic differences of the density of charge between the viral particles are consistent with the theoretical predictions obtained from X-ray structural data. Our results show that the density of charge is a distinguishing characteristic of each virus, depending crucially on the nature of the viral capsid and the presence/absence of the genetic material.
Asunto(s)
Adenoviridae , Fagos de Bacillus , Virus Diminuto del Ratón , Virión , Adenoviridae/química , Adenoviridae/ultraestructura , Animales , Fagos de Bacillus/química , Fagos de Bacillus/ultraestructura , Ratones , Microscopía de Fuerza Atómica , Virus Diminuto del Ratón/química , Virus Diminuto del Ratón/ultraestructura , Electricidad Estática , Virión/química , Virión/ultraestructuraRESUMEN
Members of the Parvoviridae family all encode a non-structural protein 1 (NS1) that directs replication of single-stranded viral DNA, packages viral DNA into capsid, and serves as a potent transcriptional activator. Here we report the X-ray structure of the minute virus of mice (MVM) NS1 N-terminal domain at 1.45Å resolution, showing that sites for dsDNA binding, ssDNA binding and cleavage, nuclear localization, and other functions are integrated on a canonical fold of the histidine-hydrophobic-histidine superfamily of nucleases, including elements specific for this Protoparvovirus but distinct from its Bocaparvovirus or Dependoparvovirus orthologs. High resolution structural analysis reveals a nickase active site with an architecture that allows highly versatile metal ligand binding. The structures support a unified mechanism of replication origin recognition for homotelomeric and heterotelomeric parvoviruses, mediated by a basic-residue-rich hairpin and an adjacent helix in the initiator proteins and by tandem tetranucleotide motifs in the replication origins.
Asunto(s)
Roturas del ADN de Cadena Simple , ADN Helicasas/química , ADN Helicasas/metabolismo , Virus Diminuto del Ratón/enzimología , Transactivadores/química , Transactivadores/metabolismo , Proteínas no Estructurales Virales/química , Proteínas no Estructurales Virales/metabolismo , Proteínas Virales/química , Animales , Secuencia de Bases , ADN Helicasas/genética , Replicación del ADN , Ratones , Virus Diminuto del Ratón/química , Virus Diminuto del Ratón/genética , Modelos Moleculares , Infecciones por Parvoviridae/veterinaria , Infecciones por Parvoviridae/virología , Unión Proteica , Estructura Terciaria de Proteína , Origen de Réplica , Enfermedades de los Roedores/virología , Transactivadores/genética , Proteínas no Estructurales Virales/genética , Proteínas Virales/genética , Proteínas Virales/metabolismoRESUMEN
Viruses constitute paradigms to study conformational dynamics in biomacromolecular assemblies. Infection by the parvovirus MVM (minute virus of mice) requires a conformational rearrangement that involves the intracellular externalization through capsid channels of the 2Nt (N-terminal region of VP2). We have investigated the role in this process of conserved glycine residues in an extended glycine-rich tract located immediately after 2Nt. Based on the virus structure, residues with hydrophobic side chains of increasing volume were substituted for glycine residues 31 or 33. Mutations had no effect on capsid assembly or stability, but inhibited virus infectivity. All mutations, except those to alanine residues which had minor effects, impaired 2Nt externalization in nuclear maturing virions and in purified virions, to an extent that correlated with the side chain size. Different biochemical and biophysical analyses were consistent with this result. Importantly, all of the tested glycine residue replacements impaired the capacity of the virion to initiate infection, at ratios correlating with their restrictive effects on 2Nt externalization. Thus small residues within the evolutionarily conserved glycine-rich tract facilitate 2Nt externalization through the capsid channel, as required by this virus to initiate cell entry. The results demonstrate the exquisite dependence on geometric constraints of a biologically relevant translocation event in a biomolecular complex.
Asunto(s)
Proteínas de la Cápside/química , Virus Diminuto del Ratón/genética , Péptidos/química , Virión/genética , Liberación del Virus/fisiología , Sustitución de Aminoácidos , Animales , Cápside/química , Cápside/metabolismo , Proteínas de la Cápside/genética , Proteínas de la Cápside/metabolismo , Línea Celular Tumoral , Núcleo Celular/metabolismo , Núcleo Celular/virología , Humanos , Cinética , Ratones , Virus Diminuto del Ratón/química , Virus Diminuto del Ratón/metabolismo , Modelos Moleculares , Mutación , Péptidos/genética , Péptidos/metabolismo , Estructura Terciaria de Proteína , Transporte de Proteínas , Termodinámica , Virión/química , Ensamble de VirusRESUMEN
New experimental approaches are required to detect the elusive transient intermediates predicted by simulations of virus assembly or disassembly. Here, an atomic force microscope (AFM) was used to mechanically induce partial disassembly of single icosahedral T=1 capsids and virions of the minute virus of mice. The kinetic intermediates formed were imaged by AFM. The results revealed that induced disassembly of single minute-virus-of-mice particles is frequently initiated by loss of one of the 20 equivalent capsomers (trimers of capsid protein subunits) leading to a stable, nearly complete particle that does not readily lose further capsomers. With lower frequency, a fairly stable, three-fourths-complete capsid lacking one pentamer of capsomers and a free, stable pentamer were obtained. The intermediates most frequently identified (capsids missing one capsomer, capsids missing one pentamer of capsomers, and free pentamers of capsomers) had been predicted in theoretical studies of reversible capsid assembly based on thermodynamic-kinetic models, molecular dynamics, or oligomerization energies. We conclude that mechanical manipulation and imaging of simple virus particles by AFM can be used to experimentally identify kinetic intermediates predicted by simulations of assembly or disassembly.
Asunto(s)
Modelos Biológicos , Estrés Mecánico , Virión/fisiología , Ensamble de Virus/fisiología , Animales , Cápside/metabolismo , Línea Celular , Cinética , Ratones , Microscopía de Fuerza Atómica , Virus Diminuto del Ratón/química , Virus Diminuto del Ratón/fisiología , Modelos Moleculares , TermodinámicaRESUMEN
Starting from a coarse grained representation of the building units of the minute virus of mice and a flexible polyelectrolyte molecule, we have explored the mechanism of assembly into icosahedral structures with the help of Langevin dynamics simulations and the parallel tempering technique. Regular icosahedra with appropriate symmetry form only in a narrow range of temperature and polymer length. Within this region of parameters where successful assembly would proceed, we have systematically investigated the growth kinetics. The assembly of icosahedra is found to follow the classical nucleation and growth mechanism in the absence of the polymer, with the three regimes of nucleation, linear growth, and slowing down in the later stage. The calculated average nucleation time obeys the laws expected from the classical nucleation theory. The linear growth rate is found to obey the laws of secondary nucleation as in the case of lamellar growth in polymer crystallization. The same mechanism is seen in the simulations of the assembly of icosahedra in the presence of the polymer as well. The polymer reduces the nucleation barrier significantly by enhancing the local concentration of subunits via adsorbing them on their backbone. The details of growth in the presence of the polymer are also found to be consistent with the classical nucleation theory, despite the smallness of the assembled structures.
Asunto(s)
Virus Diminuto del Ratón/química , Modelos Moleculares , Animales , Biopolímeros/química , Cápside/química , Cinética , Ratones , Conformación Molecular , Proteínas Virales/químicaRESUMEN
The linear single-stranded DNA genome of minute virus of mice can be ejected, in a 3'-to-5' direction, via a cation-linked uncoating reaction that leaves the 5' end of the DNA firmly complexed with its otherwise intact protein capsid. Here we compare the phenotypes of four mutants, L172T, V40A, N149A, and N170A, which perturb the base of cylinders surrounding the icosahedral 5-fold axes of the virus, and show that these structures are strongly implicated in 3'-to-5' release. Although noninfectious at 37°C, all mutants were viable at 32°C, showed a temperature-sensitive cell entry defect, and, after proteolysis of externalized VP2 N termini, were unable to protect the VP1 domain, which is essential for bilayer penetration. Mutant virus yields from multiple-round infections were low and were characterized by the accumulation of virions containing subgenomic DNAs of specific sizes. In V40A, these derived exclusively from the 5' end of the genome, indicative of 3'-to-5' uncoating, while L172T, the most impaired mutant, had long subgenomic DNAs originating from both termini, suggesting additional packaging portal defects. Compared to the wild type, genome release in vitro following cation depletion was enhanced for all mutants, while only L172T released DNA, in both directions, without cation depletion following proteolysis at 37°C. Analysis of progeny from single-round infections showed that uncoating did not occur during virion assembly, release, or extraction. However, unlike the wild type, the V40A mutant extensively uncoated during cell entry, indicating that the V40-L172 interaction restrains an uncoating trigger mechanism within the endosomal compartment.