[Relationships between the size of the adenoids and the dental arch measurements]. / Corrélations entre les dimensions des végétations adénoïdes et les mensurations des arcades dentaires.

INTRODUCTION: Enlarged adenoids are often associated with oral breathing. The latter can impact the dental arches. The purpose of this study was to determine the relationships between dental arch measurements and the size of adenoids. MATERIALS AND METHODS: A cross-sectional study was carried out on 86 children. The dimensions of the adenoids were determined from nine radiographic evaluation methods and the dental arch measurements made on the casts. The association between the grade of adenoids and the dental arch measurements was sought by Spearman correlation. That between the quantitative variables assessing adenoids and dental arch measurements was sought by Pearson correlation. The strength of these associations was analyzed using Cohen's values in 1988. The significance was set at p = 0.05. RESULTS: Palatal depth was significantly and positively correlated with adenoid grade according to the method of Holmberg and Linder-Aronson (rho = 0.55, p = 0.005) and with the adenoid measurements according to the methods of Kemaloglu, Fujioka, Johannesson, De Menezes and Maran with r respectively equal to 0.65, 0.59, 0.63, 0.47, 0.74; and p respectively equal to 0.001, 0.002, 0.001, 0.019, and < 0.001. It was also significantly but negatively correlated with the adenoids measurements according to Hibbert's method (r = -0.52, p = 0.008). Overbite was significantly and negatively correlated with adenoid dimension using the De Menezes method (r = -0.541, p = 0.006). DISCUSSION: The strength of the associations shows that using respectively Maran and De Menezes methods can allow to better highlight the association between the dimensions of the adenoids and the palatal depth and the overbite.

Orthodontic correction of severe Class II malocclusion in a patient with Prader-Willi syndrome.

Prader-Willi syndrome (PWS) is a complex disorder that affects multiple systems and may cause craniofacial and dentofacial abnormalities. However, there is still a lack of evidence in the literature regarding the progress of orthodontic treatment in patients with PWS. This case report describes the successful orthodontic treatment of a patient with PWS. A girl, 9 years 0 months of age, who had been diagnosed with PWS had protruding maxillary incisors and a convex profile. Her malocclusion was due to the posteriorly positioned mandible. Screening tests for sleep apnea syndrome showed that she had sleep-disordered breathing, including obstructive sleep apnea and bruxism. We also observed an excessive overjet of 10.0 mm, a deep overbite of 6.8 mm, and the congenital absence of the mandibular second premolars. The patient was diagnosed with an Angle Class II malocclusion and a skeletal Class II jaw-base relationship with a deep overbite. Functional appliance therapy with mandibular advancement, which can enlarge the upper airway and increase the upper airspace, was performed to prevent further deterioration of the patient's obstructive sleep apnea. An acceptable occlusion with a proper facial profile and functional excursion were achieved without interference after comprehensive 2-stage treatment that incorporated orthodontic therapy for the patient's excessive overjet and deep overbite. The resulting occlusion was stable, and the occlusal force and the contact area gradually increased over a 2-year retention period. These results suggest that orthodontic treatment offers the opportunity to greatly improve the health and quality of life of people with PWS.

Severe unilateral scissors-bite with a constricted mandibular arch: Bite turbos and extra-alveolar bone screws in the infrazygomatic crests and mandibular buccal shelf.

A 33-year-old woman had a chief complaint of difficulty chewing, caused by a constricted mandibular arch and a unilateral full buccal crossbite (scissors-bite or Brodie bite). She requested minimally invasive treatment but agreed to anchorage with extra-alveolar temporary anchorage devices as needed. Her facial form was convex with protrusive but competent lips. Skeletally, the maxilla was protrusive (SNA, 86°) with an ANB angle of 5°. Amounts of crowding were 5 mm in the mandibular arch and 3 mm in the maxillary arch. The mandibular midline was deviated to the left about 2 mm, which was consistent with a medially and inferiorly displaced mandibular right condyle. Ectopic eruption of the maxillary right permanent first molar to the buccal side of the mandibular first molar cusps resulted in a 2-mm functional shift of the mandible to the left, which subsequently developed into a full buccal crossbite on the right side. Treatment was a conservative nonextraction approach with passive self-ligating brackets. Glass ionomer bite turbos were bonded on the occlusal surfaces of the maxillary left molars at 1 month into treatment. An extra-alveolar temporary anchorage device, a 2 × 12-mm OrthoBoneScrew (Newton A, HsinChu City, Taiwan), was inserted in the right mandibular buccal shelf. Elastomeric chains, anchored by the OrthoBoneScrew, extended to lingual buttons bonded on the lingually inclined mandibular right molars. Cross elastics were added as secondary uprighting mechanics. The maxillary right bite turbos were reduced at 4 months and removed 1 month later. At 11 months, bite turbos were bonded on the lingual surfaces of the maxillary central incisors, and an OrthoBoneScrew was inserted in each infrazygomatic crest. The Class II relationship was resolved with bimaxillary retraction of the maxillary arch with infrazygomatic crest anchorage and intermaxillary elastics. Interproximal reduction was performed to correct the black interdental spaces and the anterior flaring of the incisors. The scissors-bite and lingually inclined mandibular right posterior segment were sufficiently corrected after 3 months of treatment to establish adequate intermaxillary occlusion in the right posterior segments to intrude the maxillary right molars. The anterior bite turbos opened space for extrusion of the posterior teeth to level the mandibular arch, and the infrazygomatic crest bone screws anchored the retraction of the maxillary arch. In 27 months, this difficult malocclusion, with a Discrepancy Index score of 25, was treated to a Cast-Radiograph Evaluation score of 22 and a pink and white esthetic score of 3.

Impact of overbite and overjet on oral health-related quality of life of children and adolescents.

BACKGROUND: Usually, morphological parameters of the teeth are recorded to help assess the indication for orthodontic treatment. It is assumed that significant deviations from average values compromise the quality of life. The aim of this study is to analyse the impact of overbite and overjet on oral health-related quality of life (OHRQoL) of children and adolescents. PATIENTS AND METHODS: A total of 748 subjects, aged 9.5-15.5 years, participated in the LIFE child project of the University of Leipzig, where they underwent a general medical and dental examination. Overbite and overjet were measured, and aberrations of the OHRQoL were recorded by the probands themselves, who completed the German version of the Child Perceptions Questionnaire (CPQ-G11-14). The OHRQoL is divided into four domains ("oral symptoms", "functional limitations", "emotional well-being" and "social well-being") and is analysed by means of a CPQ score depending on age, gender, socioeconomic status and orthodontic treatment. RESULTS: On average, the participants listed 10.5 (±13.1) problem issues on a CPQ scale ranging from 0 to 140. Subjects with current orthodontic treatment had a CPQ score about 2.5 (±2.4) higher than those without treatment. The aberrations were mainly observed in the domains "oral symptoms" and "functional limitations". Multiple linear regression showed that deviations of the overbite had only little influence on the OHRQoL, but deviations of an overjet-especially of >6 mm increased the CPQ summary score about 6 points. CONCLUSION: Children and adolescents with overjet deviations of >6 mm in comparison to the norm are associated with significant limitations of the OHRQoL. However, overbite deviations have only little influence.

Cambio de posición del cóndilo dentro de la cavidad glenoidea en pacientes clase ii esqueletal con mordida profunda / Change of position of condyle within glenoidal cavity in patientsclass II skeletal with deep bite

Objetivo: El propósito de esta investigación es determinar el cambio de posición del cóndilo dentro de la cavidad glenoidea en pacientes clase II Esqueletal con mordida profunda después de la utilización de un plano de mordida anterior fijo acrílico y metálico. Materiales y Métodos: Se tomará una muestra del 20% de un universo de 100 pacientes de Clínica de la Escuela de Postgrado de la Facultad de Odontología de la Universidad de Guayaquil para demostrar los cambios que se producen en la articulación temporomandibular como consecuencia de la nueva posición adoptada por el cóndilo debido a la nueva postura mandibular por el uso del plano de mordida. Estos pacientes serán evaluados a través de radiografías cefalométricas que serán tomadas en el transcurso del uso de los planos de mordida anterior hasta el momento que se ha conseguido el contacto del segmento posterior de las piezas dentarias donde se tomará en consideración el cambio de posición del cóndilo y de esta manera determinar la estabilidad que se desea conseguir en el tratamiento. Resultados: Todos los pacientes que utilizaron plano de mordida anterior metálico obtuvieron en el 100% el cambio de posición del cóndilo mandibular, llegando a la norma de 32+-2; mientras que el 69,23% de los pacientes que utilizaron el plano de mordida anterior acrílico tuvieron un cambio positivo y el 30,77% fue negativo. Conclusiones: Por lo tanto se concluye que con el plano de mordida anterior metálico se obtiene mayor exactitud en el cambio de posición del cóndilo mandibular.

The purpose of this investigation is to determine the change of position of the condyle within the glenoid cavity in class II patients with deep bite after the use of a fixed anterior Acrylic and Metallic bite plane, which will be done with a sample of the 20% of a universe of 100 patients from Clinic of the Postgraduate School of the Faculty of Dentistry of the University of Guayaquil to demonstrate the changes that occur in the temporomandibular joint resulting from the new position adopted by the condyle due to the new mandibular posture by the use of the bite plane. These patients will be evaluated through cephalometric radiographs that will be taken in the course of the use of the anterior bite planes until the contact of the posterior segment of the dental pieces has been achieved where the change of position of the condyle will be taken into account And thus determine the stability to be achieved in the treatment. The results that presented the patients in the change of position of the mandibular condyle that they used plane of previous bite Metallic was positive in 100% of them, arriving at the norm of 32 + -2; While 69.23% of patients who used the anterior acrylic bite plane had a positive change and 30.77% were negative; Therefore it is concluded that with the Metallic anterior bite plane, greater accuracy is obtained in the position change of the mandibular condyle.

Class II Division I Treated with Twin Block Appliance: A Case Report.

A 10-yearfemale presented a skeletal Class II relation with 7mm of overet, 40% overbite, and bilateral posterior lingual crossbite. Two phase therapy was planned to correct Class II skeletal relation, overjet, overbite, and achieve lip competency. Phase I therapy was done with Twin Block appliance to advance the retrognathic mandible. Phase II therapy was accomplished with fixed appliance for arch coordination, to correct minor displacement, and to finalize occlusion. Post treatment skeletal Class I relation was achieved. Incisors inclination was improved, ideal overjet and overbite with bilateral class I molar relationship was achieved. As the mandible advanced, lip competency, facial convexity, and mentolabial sulcus improved.

Reliability of overbite depth indicator (ODI) and anteroposterior dysplasia indicator (APDI) in the assessment of different vertical and sagittal dental malocclusions: a receiver operating characteristic (ROC) analysis.

INTRODUCTION:: Differential diagnosis of skeletal and dental relationships is crucial for planning orthodontic treatment. Overbite depth indicator (ODI) and anteroposterior dysplasia indicator (APDI) had been introduced in the past for assessment of vertical and sagittal jaw relationships, respectively. OBJECTIVE:: The objectives of this study were to evaluate the reliability of ODI and APDI in overbite and Angle malocclusions, as well as assess their diagnostic reliability among males and females of different age groups. MATERIAL AND METHODS:: This study was conducted using pretreatment dental casts and lateral cephalograms of 90 subjects. For ODI, subjects were divided into three groups based on overbite (normal overbite, open bite and deep bite). Likewise, the same subjects were divided for APDI into three groups, based on Angle's malocclusion classification (dental Class I, II and III malocclusions). Mann-Whitney U test was applied for comparison of study parameters regarding sex and different age groups. The mean values of ODI and APDI were compared among study groups by means of Kruskal-Wallis and post-hoc Dunnet T3 tests. The receiver operating characteristic (ROC) curve was applied to test diagnostic reliability. RESULTS:: Insignificant differences were found for ODI and APDI angles, particularly in regards to sex and age. Significant intergroup differences were found in different overbite groups and Angle's classification for ODI and APDI, respectively (p < 0.001). ROC showed 91% and 88% constancy with dental pattern in ODI and APDI, respectively. CONCLUSIONS:: ODI can reliably differentiate deep bite versus normal overbite and deep bite versus open bite. APDI can reliably differentiate dental Class I, II and III malocclusions.

Reliability of overbite depth indicator (ODI) and anteroposterior dysplasia indicator (APDI) in the assessment of different vertical and sagittal dental malocclusions: a receiver operating characteristic (ROC) analysis

ABSTRACT Introduction: Differential diagnosis of skeletal and dental relationships is crucial for planning orthodontic treatment. Overbite depth indicator (ODI) and anteroposterior dysplasia indicator (APDI) had been introduced in the past for assessment of vertical and sagittal jaw relationships, respectively. Objective: The objectives of this study were to evaluate the reliability of ODI and APDI in overbite and Angle malocclusions, as well as assess their diagnostic reliability among males and females of different age groups. Material and Methods: This study was conducted using pretreatment dental casts and lateral cephalograms of 90 subjects. For ODI, subjects were divided into three groups based on overbite (normal overbite, open bite and deep bite). Likewise, the same subjects were divided for APDI into three groups, based on Angle's malocclusion classification (dental Class I, II and III malocclusions). Mann-Whitney U test was applied for comparison of study parameters regarding sex and different age groups. The mean values of ODI and APDI were compared among study groups by means of Kruskal-Wallis and post-hoc Dunnet T3 tests. The receiver operating characteristic (ROC) curve was applied to test diagnostic reliability. Results: Insignificant differences were found for ODI and APDI angles, particularly in regards to sex and age. Significant intergroup differences were found in different overbite groups and Angle's classification for ODI and APDI, respectively (p < 0.001). ROC showed 91% and 88% constancy with dental pattern in ODI and APDI, respectively. Conclusions: ODI can reliably differentiate deep bite versus normal overbite and deep bite versus open bite. APDI can reliably differentiate dental Class I, II and III malocclusions.

RESUMO Introdução: o diagnóstico diferencial das relações esqueléticas e dentárias é essencial para o plano de tratamento ortodôntico. O indicador de profundidade da sobremordida (ODI)) e o indicador de displasia anteroposterior (APDI) foram desenvolvidos, no passado, para avaliação das relações verticais e sagitais dos maxilares, respectivamente. Objetivo: o objetivo desse estudo foi avaliar a confiabilidade do ODI e do APDI em diferentes sobremordidas e más oclusões de Angle, bem como verificar sua confiabilidade diagnóstica em homens e mulheres de diferentes grupos etários. Métodos: esse estudo foi conduzido utilizando-se modelos de estudo e radiografias cefalométricas laterais pré-tratamento de 90 indivíduos. Para o ODI, os indivíduos foram divididos em três grupos, com base na sobremordida (sobremordida normal, mordida aberta, mordida profunda). Ainda, para avaliação do APDI, esses mesmos indivíduos foram divididos em três grupos baseados na classificação de Angle para as más oclusões (Classes I, II e III dentárias). O teste U de Mann-Whitney foi aplicado para comparar os parâmetros estudados, quanto ao sexo e diferentes grupos etários. Os valores médios do ODI e do APDI foram comparados entre os grupos estudados por meio dos testes de Kruskal-Wallis e post-hoc T3 de Dunnett. A curva ROC (receiver operating characteristic) foi aplicada para testar a confiabilidade do diagnóstico. Resultados: diferenças não significativas foram encontradas para os ângulos ODI e APDI, particularmente em relação ao sexo e à idade. Diferenças significativas foram encontradas entre os grupos com diferentes sobremordidas e diferentes más oclusões de Angle, para o ODI e para o APDI, respectivamente (p < 0,001). A ROC mostrou 91% e 88% de concordância com o padrão dentário, para o ODI e APDI, respectivamente. Conclusões: o ODI mostrou-se confiável para diferenciar entre a mordida profunda e a sobremordida normal, e entre a mordida profunda e a mordida aberta. O APDI é confiável para se diferenciar entre as más oclusões dentárias de Classes I, II e III.

Diagnosis and conservative treatment of skeletal Class III malocclusion with anterior crossbite and asymmetric maxillary crowding.

A man, aged 28 years 9 months, came for an orthodontic consultation for a skeletal Class III malocclusion (ANB angle, -3°) with a modest asymmetric Class II and Class III molar relationship, complicated by an anterior crossbite, a deepbite, and 12 mm of asymmetric maxillary crowding. Despite the severity of the malocclusion (Discrepancy Index, 37), the patient desired noninvasive camouflage treatment. The 3-Ring diagnosis showed that treatment without extractions or orthognathic surgery was a viable approach. Arch length analysis indicated that differential interproximal enamel reduction could resolve the crowding and midline discrepancy, but a miniscrew in the infrazygomatic crest was needed to retract the right buccal segment. The patient accepted the complex, staged treatment plan with the understanding that it would require about 3.5 years. Fixed appliance treatment with passive self-ligating brackets, early light short elastics, bite turbos, interproximal enamel reduction, and infrazygomatic crest retraction opened the vertical dimension of the occlusion, improved the ANB angle by 2°, and achieved excellent alignment, as evidenced by a Cast Radiograph Evaluation score of 28 and a Pink and White dental esthetic score of 3.

Prevalence of TMD symptoms in Turkish migrants and re-settlers from the former Soviet Union in comparison to a German group.

OBJECTIVES: The objective of this study was to investigate the prevalence of temporomandibular disorder (TMD) symptoms among Turks and re-settlers with German origin from Russia and to compare those findings with a German group from the same area. METHOD: Sixty-nine Turkish migrants, 50 re-settlers, and 96 Germans were clinically examined according to a short version of the Research Diagnostic Criteria (RDC/TMD) protocol. The subjects participated in a feasibility study of the German National Cohort and were recruited from the study center Heidelberg/Mannheim of the cluster Baden-Württemberg/Saarland. RESULTS: Significant differences emerged between the three ethnic groups for unassisted opening without pain, maximum unassisted opening, and overbite, with highest values for the German group. No significant differences were found for muscle pain on palpation or muscle and joint pain during opening. DISCUSSION: As the authors identified significant differences between the different ethnic groups for metric measurements, it might be beneficial to include questions concerning the ethnicity to the German version of the RDC/TMD for further research, to make the results more comparable.

Exploring the association between feeding habits, non-nutritive sucking habits, and malocclusions in the deciduous dentition.

BACKGROUND: This study aimed to explore the association between feeding habits, non-nutritive sucking habits, and malocclusions in deciduous dentition. METHODS: A cross-sectional observational survey was carried out in 275 children aged 3 to 6 years and included clinical evaluations of malocclusions and structured interviews. Statistical significance for the association between feeding habits and the development of malocclusion was determined using chi-square and Fisher's exact tests. In addition, odds ratio (OR) calculations were used for intergroup comparisons. Controlling for confounders was adjusted by excluding children with non-nutritive sucking habits. RESULTS: The results indicated that there were no significant relationships between exclusive breastfeeding or bottlefeeding and the presence of any type of malocclusion (p > 0.05). There was also no significant association between breastfeeding or bottlefeeding duration and malocclusion (p > 0.05). In addition, it was observed that exclusive breastfeeding had a protective effect and diminished the risk of acquiring non-nutritive sucking habits (p = 0.001). CONCLUSIONS: There was no association between feeding habits and malocclusions in the deciduous dentition in this sample of children. Exclusive breastfeeding reduced the risk of acquiring non-nutritive sucking habits.

Síndrome de mandíbula pequeña. En búsqueda de una herramienta diagnóstica / Small lower jaw bone síndrome. In search of a diagnostic tool

El objetivo del presente estudio es determinar los tamaños mandibulares normales para nuestra población colombiana en pacientes menores de 7 años, aportando tablas de normalidad que relacionen el tamaño mandibular con el del maxilar, la base de cráneo, la talla y el peso del paciente. Realizamos un estudio de corte transversal con 600 pacientes sanos de 0 a 7 años de edad, comparando el peso y talla de la muestra con el de la población general. Tomamos las siguientes mediciones antropométricas: otobasion inferior-nasion, otobasion inferiorgnation, trago-subnasion-trago, trago-pogonion-trago y overjet (sobremordida horizontal) y calculamos el índice mandibular (arco maxilarx overjet / arco mandibular). Relacionamos todas las medidascon el peso y talla de cada paciente. Obtuvimos las tablas de normalidad, tablas de correlación y curvas de crecimiento. Comprobamos que el crecimiento mandibular se comporta de forma logarítmica en el primer año de vida y luego lo hace linealmente. La sobremordida horizontal (overjet) promedio es de 2 mm con un rango de normalidad de 0 a 4 mm, con una alta correlacióncon el índice mandibular. La talla presenta una muy buena correlación con las medidas antropométricas analizadas, no así el peso y la edad. No se demostró un aumento en la velocidad de crecimiento mandibular a lo largo del tiempo en comparación con el crecimiento maxilar y de la base del cráneo. La mejoría de la vía aérea esperada en el primer año de vida en pacientes con micrognatia podría ser secundaria al crecimiento logarítmico máxilo-mandibular y no al sobrecrecimiento mandibular compensatorio o catchup mandibular (AU)

Our objective is determining normal lower jawbone size in the colombian population aged less than 7 years old and its correlation with the upper jaw, the base of the skull, height and weight. A cross-sectional study was carried out on 600 healthy patients aged 0 to 7 years, comparing sample weight and height to that of the general population. The following anthropometric measurements were taken: nasion-otobasion inferius, gnathion otobasioninferius, tragus-subnasale-tragus, tragus-pogonion-tragus and vertical overlap (overbite) and horizontal overlap (overjet); the mandibularindex was also calculated (mandibular arch x overjet /mandibular arch). All measurements were related to each patient’s weight and height. Normal distribution tables, correlation and growth curve were obtained. Mandibular maxillary growth had a logarithmic pattern during the first year of life and then became linear. Average horizontal overlap (dental overjet) was 2 mm (0 to 4 mm range of normality), having high correlation with mandibular index. Height had a very good correlation with the anthropometric measurements analysed here; this was not the case with weight and age. Greater mandibular growth speed compared to jaw growth and the base of the skull was not demonstrated. Expected airway improvement during the first year of life in micrognathia patients could be secondary to maxillary mandibular logarithmic growth and not to mandibular compensatory over growth (catch up) (AU)

Association of overjet and overbite with esthetic impairments of oral health-related quality of life.

OBJECTIVE: Esthetics is an important part of quality of life and a frequent reason for orthodontic treatment demand. It was the aim of this study to investigate whether esthetic impairments, related to overjet and overbite, can be assessed with an established oral health-related quality of life instrument. MATERIALS AND METHODS: Data from 1968 participants (age: 16-90 years; 69.8% female) from three German surveys were analyzed. Esthetic impairments of oral health-related quality of life were measured with four questions of the Oral Health Impact profile (OHIP), which comprise esthetic aspects of oral health-related quality of life. Higher values represent greater esthetic impairment (sum score: 0-16). Overbite and overjet values were categorized (≤ - 1 mm, 0-1 mm, 2-3 mm, 4-5 mm, ≥ 6 mm). The specific impact of each category on esthetic impairment, in relation to the reference category (2-3 mm), was calculated in linear regression analyses. The type of relationship and the specific impact of overbite and overjet were evaluated in regression analyses with fractional polynomials. RESULTS: Overbite ranged from - 5 to 15 mm (mean: 3.2 mm) and overjet from - 7 to 19 mm (mean: 3.1 mm). Both an increase and a decrease in overjet, in relation to the reference category, resulted in more esthetic-related oral health-related quality of life impairments. However, in this model, only the effect for increased overjet was statistically significant (4-5 mm: + 0.4 OHIP points; ≥ 6 mm: + 0.9 OHIP points). In the regression analysis with fractional polynomials, both an increase and a decrease in overjet resulted in more esthetic impairments, characterized by a U-shaped relationship. No association could be verified for overbite. CONCLUSION: A substantial increase or decrease of overjet from the reference values is associated with esthetic impairments of oral health-related quality of life, whereas the extent of overbite seems to have no impact on esthetics.

Early orthodontic treatment: a new index to assess the risk of malocclusion in primary dentition.

AIM: A new index targeted on the risk of malocclusions in primary dentition, called Baby-ROMA (Risk Of Malocclusion Assessment) index, was set up to assess risks/benefits in early orthodontic therapies. The Baby-ROMA index was designed from the observation that some of the malocclusion signs, observed in primary dentition, can worsen with growth, others remain the same over time and others can even improve. Therefore it would be important to classify the malocclusions observed at an early stage on a risk- based scale. MATERIALS AND METHODS: The reliability of the index was tested on 200 children, referred by their paediatricians to two different Orthodontic Departments, aged 4-6 years and in full primary dentition. The children were evaluated by two operators, both trained and calibrated on the use of the Baby-ROMA index. RESULTS: The K test showed a high reproducibility of the index. It is shown that 50% of patients presented malocclusion and crossbite had the highest prevalence, followed by tooth decay and early loss of deciduous teeth and negative overjet. CONCLUSION: The Baby-ROMA index was helpful to assess the severity of malocclusion and the timing for orthodontic treatment in very young patients (primary teeth).

From conventional to self-ligating bracket systems: is it possible to aggregate the experience with the former to the use of the latter?

INTRODUCTION: Orthodontics, just as any other science, has undergone advances in technology that aim at improving treatment efficacy with a view to reducing treatment time, providing patients with comfort, and achieving the expected, yet hardly attained long-term stability. The current advances in orthodontic technology seem to represent a period of transition between conventional brackets (with elastic modules) and self-ligating brackets systems. Scientific evidence does not always confirm the clear clinical advantages of the self-ligating system, particularly with regard to reduced time required for alignment and leveling (a relatively simple protocol), greater comfort for patients, and higher chances of performing treatment without extractions - even though the number of extractions is more closely related to patient's facial morphological pattern, regardless of the technique of choice. Orthodontics has recently and brilliantly used bracket individualization in compensatory treatment with a view to improving treatment efficacy with lower biological costs and reduced treatment time. OBJECTIVE: This paper aims at presenting a well-defined protocol employed to produce a better treatment performance during this period of technological transition. It explores the advantages of each system, particularly with regards to reduced treatment time and increased compensatory tooth movement in adult patients. It particularly addresses compensable Class III malocclusions, comparing the self-ligating brackets system, in which greater expansive and protrusive tooth movement (maxillary arch) is expected, with Capelozza Prescription III conventional brackets, in which maintaining the original form of the arch (mandibular arch) with as little changes as possible is key to yield the desired results.

From conventional to self-ligating bracket systems: Is it possible to aggregate the experience with the former to the use of the latter?

INTRODUCTION: Orthodontics, just as any other science, has undergone advances in technology that aim at improving treatment efficacy with a view to reducing treatment time, providing patients with comfort, and achieving the expected, yet hardly attained long-term stability. The current advances in orthodontic technology seem to represent a period of transition between conventional brackets (with elastic ligatures) and self-ligating brackets systems. Scientific evidence does not always confirm the clear clinical advantages of the self-ligating system, particularly with regard to reduced time required for alignment and leveling (a relatively simple protocol), greater comfort for patients, and higher chances of performing treatment without extractions - even though the number of extractions is more closely related to patient's facial morphological pattern, regardless of the technique of choice. Orthodontics has recently and brilliantly used bracket individualization in compensatory treatment with a view to improving treatment efficacy with lower biological costs and reduced treatment time. OBJECTIVE: This paper aims at presenting a well-defined protocol employed to produce a better treatment performance during this period of technological transition. It explores the advantages of each system, particularly with regards to reduced treatment time and increased compensatory tooth movement in adult patients. It particularly addresses compensable Class III malocclusions, comparing the system of self-ligating brackets, with which greater expansive and protrusive tooth movement (maxillary arch) is expected, with conventional brackets Capelozza Prescription III, with which maintaining the original form of the arch (mandibular arch) with as little changes as possible is key to yield the desired results. .

INTRODUÇÃO: a Ortodontia passa, como toda ciência, por constantes evoluções tecnológicas que buscam aumentar a efetividade da abordagem terapêutica, visando a diminuição do tempo de tratamento, o aumento do conforto para os pacientes, bem como a obtenção da tão almejada, e pouco alcançada, estabilidade em longo prazo. O estágio atual de desenvolvimento tecnológico da Ortodontia representa, ao que tudo indica, uma fase de transição entre os sistemas convencionais de ligação (com módulos elásticos) e os chamados autoligáveis. As evidências científicas nem sempre consubstanciam a clara percepção clínica das vantagens desse sistema, no que diz respeito a um menor tempo de alinhamento e nivelamento, uma relativa simplificação técnica, maior conforto para os pacientes, além do aumento da capacidade de tratamento sem extrações - embora essa indicação esteja mais ligada à avaliação do padrão morfológico facial, e menos a qualquer escolha técnica. Desde um passado recente e não menos brilhante, a Ortodontia vem utilizando a individualização de braquetes para tratamentos compensatórios, buscando aumentar a efetividade da abordagem terapêutica, com menores custos biológicos e menor tempo de tratamento. OBJETIVO: o presente artigo tem como objetivo apresentar um protocolo bem definido de melhor aproveitamento dessa fase de transição tecnológica, buscando explorar o que cada sistema tem de melhor, principalmente sob a óptica da redução do tempo de tratamento e aumento da capacidade de movimentação dentária compensatória em pacientes adultos. Especificamente, serão abordadas as más oclusões de Classe III compensáveis, usando o sistema de braquetes ...

Transposition of maxillary canine to central incisor site: aetiology, treatment options and case report.

Dental transposition is relatively infrequent anomaly of the developing dentition. This article focuses on canine transposition and explores the aetiology, diagnosis and treatment of this challenging anomaly. Specifically, the management of a case of canine transposition involving an unerupted maxillary central incisor is described.

The PAR index for evaluation of treatment outcomes in orthodontics: a clinical audit of 50 cases.

In the context of this study, a clinical audit of cases treated by a single orthodontist was carried out to illustrate one practical application of the PAR index. Fifty pairs of dental casts taken from the patient group before and at the end of orthodontic treatment were evaluated by an orthodontist trained in the use of the PAR index. This evaluation shows that the average overall PAR score for the subjects included in the study fell from an initial value of 25.64 ± 11.73 points to 1.78 ± 2.79 points at the end of orthodontic treatment. The average reduction attributable to orthodontic treatment was 23.86 ± 0.95 points, for an average percentage reduction of 93.36 ± 9.02%. When cases were classified according to the degree of improvement suggested by the nomogram of the PAR index, 23 (46%) were in the "Improved" category after treatment, and 27 cases (54%) in the "Greatly improved" category. This adds up to a total of 100% in these two categories, with none in the "No better" or "Worse" categories. It should be recalled that a high standard of orthodontic treatment is considered to be reached when the average percentage reduction of the PAR score exceeds 70% and when the number of cases in the "Worse or no better" category is below 5%.

An audit of orthodontic treatment eligibility among new patients referred to a Health Service Executive orthodontic referral centre.

AIM: The aim of this audit was to evaluate orthodontic treatment eligibility among new patients referred for assessment from primary dental care clinics in the Health Service Executive (HSE) South region to a HSE orthodontic referral centre. METHOD: A data collection form was designed and applied prospectively to consecutive new patient referrals who attended diagnostic clinics at the Orthodontic Unit, Cork University Dental School and Hospital, between October 2011 and February 2012. Orthodontic treatment eligibility was based on guidelines introduced by the HSE in 2007. RESULTS: Data on 291 patients (147 males and 144 females) with a mean age of 11.6 years (SD +/- 2.4 years; range 8-19 years) were evaluated. Of the 83 (29%) patients eligible for orthodontic treatment under the guidelines, the most commonly diagnosed malocclusion traits were a crossbite with greater than 2 mm discrepancy between retruded contact position and intercuspal position (24 patients), followed by an overjet greater than 9 mm (21 patients). CONCLUSIONS: A total of 29% of new patient referrals were deemed eligible for orthodontic treatment under HSE eligibility guidelines introduced in 2007. Reduction of new patient referrals not eligible for treatment, under these guidelines, is required to enable more efficient use of resources.

Audit of the Health Service Executive orthodontic referral pathway between 2009 and 2011 in the Dublin Mid-Leinster region.

An audit was undertaken in 2009 to determine the success of the new national orthodontic referral protocol introduced to the Health Service Executive (HSE) in 2007 and operated in the Dublin Mid-Leinster HSE region. It was repeated in 2011 to determine if the HSE austerity measures have had a bearing on the orthodontic service performance in the Dublin Mid-Leinster HSE region. The audit also measured the success of referring practitioners in identifying the correct Index of Orthodontic Treatment Need (IOTN) classification of the patient. In the 2011 audit, the figures were broken down to identify the occlusal variables that caused dental practitioners most difficulties in identification. The audit demonstrates a good referral to assessment timeframe in 2009 (85-80% compliance for IOTN 5 and 4 within three to six months, respectively), which deteriorates significantly in 2011 (26-4% for IOTN 5 and 4 within three to six months, respectively). The ability of dentists to identify the correct IOTN classification was better in 2009 (60% correct) compared to 2011 (51% correct), but both figures fell below the audit standard of 75% of referrals with correct IOTN classifications. The IOTN occlusal dental health components most readily identified by referring practitioners and meeting audit standards were 5a (overjet >9mm), 5i (impacted teeth) and 5h (extensive hypodontia). The remaining occlusal dental health components in the HSE IOTN fell below the audit standard. The audit clearly identifies a requirement for a continued educational effort to maintain the HSE IOTN skill base in primary care, and a need for additional resources to manage the demand for orthodontic assessments.