RESUMEN
Environmental DNA (eDNA) analyses of species present in marine environments is the most effective biological diversity measurement tool currently available. eDNA sampling methods are an intrinsically important part of the eDNA biodiversity analysis process. Identification and development of eDNA sampling methods that are as rapid, affordable, versatile and practical as possible will improve rates of detection of marine species. Optimal outcomes of eDNA biodiversity surveys come from studies employing high levels of sampling replication, so any methods that make sampling faster and cheaper will improve scientific outcomes. eDNA sampling methods that can be applied more widely will also enable sampling from a greater range of marine surface micro-habitats, resulting in detection of a wider range of organisms. In this study, we compared diversity detection by several methods for sampling eDNA from submerged marine surfaces: polyurethane foam, nylon swabs, microfibre paint rollers, and sediment scoops. All of the methods produced a diverse range of species identifications, with >250 multicellular species represented by eDNA at the study site. We found that widely-available small paint rollers were an effective, readily available and affordable method for sampling eDNA from underwater marine surfaces. This approach enables the sampling of marine eDNA using extended poles, or potentially by remotely operated vehicles, where surface sampling by hand is impractical.
Asunto(s)
Biodiversidad , ADN Ambiental , Pintura , Pintura/análisis , ADN Ambiental/análisis , Organismos Acuáticos/genética , Manejo de Especímenes/métodos , Monitoreo del Ambiente/métodos , PoliuretanosRESUMEN
Tefillin are Jewish ritual artifacts consisting of leather cases, containing inscribed slips, which are affixed with leather straps to the body of the tefillin practitioner. According to current Jewish ritual law, the tefillin cases and straps are to be colored black. The present study examines seventeen ancient tefillin cases discovered among the Dead Sea Scrolls in caves in the Judean Desert. All seventeen cases display grain surfaces with a very dark, nearly black appearance. We start with a hypothesis that the cases were intentionally colored black in antiquity using either a carbon-based or iron-gall-based paint or dye. The aim of this study is to test this hypothesis by subjecting these tefillin cases to a battery of examinations to assess the presence of carbon and iron used as pigments, and of organic materials which may have been used as binding agents in a paint. The tests deployed are: (1) macroscopic and microscopic analyses; (2) multispectral imaging using infrared wavelengths; (3) Raman spectroscopy; (4) Fourier transform infrared spectroscopy (FTIR); and (5) scanning electron microscope (SEM) and energy dispersive X-ray (EDX) spectroscopy. The results of these tests found no traces of carbon-based or iron-gall-based pigments, nor of organic compounds which may have served as binders in a paint. These results suggest that our posited hypothesis is unlikely. Instead, results of the SEM examination suggest it more likely that the black color on the surfaces of the tefillin cases is the result of natural degradation of the leather through gelatinization. The Judean Desert tefillin likely represent tefillin practices prior to when the rabbinic prescription on blackening tefillin was widely practiced. Our study suggests that the kind of non-blackened tefillin which the later rabbis rejected in their own times may well have been quite common in earlier times.
Asunto(s)
Espectrometría Raman , Humanos , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Espectrometría Raman/métodos , Historia Antigua , Pintura/análisis , Pintura/historia , Cuevas , Espectrometría por Rayos X , Clima Desértico , Conducta Ceremonial , Colorantes/análisis , Colorantes/químicaRESUMEN
Marinas are central hubs of global maritime leisure and transport, yet their operations can deteriorate the environmental quality of sediments. In response, this study investigated the metal contamination history associated with antifouling paint uses in a sediment core collected from Bracuhy marina (Southeast Brazil). Analysis target major and trace elements (Cu, Zn, Pb, Cd and Sn), rare earth elements (REEs), and Pb isotopes. The modification in Pb isotopic ratios and REEs pattern unequivocally revealed sediment provenance disruption following the marina construction. Metal distribution in the sediment core demonstrates that concentrations of Cu and Zn increased by up to 15 and 5 times, respectively, compared to the local background. This severe Cu and Zn contamination coincides with the onset of marina operations and can be attributed to the use of antifouling paints.
Asunto(s)
Cobre , Monitoreo del Ambiente , Sedimentos Geológicos , Pintura , Contaminantes Químicos del Agua , Sedimentos Geológicos/química , Pintura/análisis , Contaminantes Químicos del Agua/análisis , Cobre/análisis , Brasil , NavíosRESUMEN
Two distemper paint samples taken from decorative boards in Uvdal stave church, Norway, were analysed using palaeoproteomics, with an aim of identifying their binder and possible contaminants. The results point at the use of calfskin to produce hide glue as the original paint binder, and are consistent with the instructions of binder production and resource allocation in the historical records of Norway. Although we did not observe any evidence of prior restoration treatments using protein-based materials, we found abundant traces of human saliva proteins, as well as a few oats and barley peptides, likely deposited together on the boards during their discovery in the 1970s. This work illustrates the need to fully consider contamination sources in palaeoproteomics and to inform those working with such objects about the potential for their contamination.
Asunto(s)
Pintura , Proteómica , Noruega , Proteómica/métodos , Humanos , Pintura/análisis , Saliva/química , Saliva/virología , ArqueologíaRESUMEN
The main sources of lead exposure for children occur in the home environment, yet no low-cost analytical methods exist to screen homes for lead hazards. Previously, an inexpensive (~$20), quantitative lead screening kit was developed in which residents collect soil, paint, and dust samples that are returned to a laboratory for lead analysis using X-ray fluorescence spectroscopy (XRF). This screening kit was initially validated in 2020; it was determined that in situ and ex situ XRF lead measurements on the same samples exhibited strong sensitivity, specificity, and accuracy. As a follow-up to the initial validation, an implementation study and further statistical analyses were conducted. Correlation analysis using the results from nearly 400 screening kits identified an overall lack of correlation between sample types, reinforcing the utility of all eight sample locations. Principal component analysis searched for underlying correlations in sample types and provided evidence that both interior and exterior paint are major sources of lead hazards for Indiana homes. The implementation study compared the results of the government-standard lead inspection and risk assessment (LIRA) and the lead screening kit in 107 Indiana homes. In the United States, the LIRA is a thorough inspection of paint, dust, and soil that is usually state mandated in response to a child's elevated blood level and is used to identify where remediation efforts should be focused. The lead screening kit and LIRA agreed on the presence of lead in 79 of the 107 homes tested (74%). Discrepancies in agreement are likely the result of differences in the sample location and number of samples collected by each method. Overall, these results suggest that the lead screening kit is an acceptable resource that could be used to expand the services health departments provide for lead prevention. Integr Environ Assess Manag 2024;20:1504-1513. © 2024 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).
Asunto(s)
Polvo , Monitoreo del Ambiente , Vivienda , Plomo , Plomo/análisis , Monitoreo del Ambiente/métodos , Polvo/análisis , Humanos , Exposición a Riesgos Ambientales/análisis , Medición de Riesgo/métodos , Indiana , Pintura/análisis , Contaminantes Ambientales/análisis , Intoxicación por Plomo , Espectrometría por Rayos XRESUMEN
Polysaccharide-based materials of plant origin are known to have been used as binding media in paint and ground layers of artifacts from ancient Egypt, including wall paintings, cartonnages and sarcophagi. The use of gums from Acacia, Astragalus and Prunus genera has been suggested in the literature on the basis of their qualitative or quantitative monosaccharide profile after complete chemical hydrolysis. The introduction of partial enzymatic digestion of the polysaccharide material, followed by analysis of the released oligosaccharides by matrix assisted laser desorption ionization-time-of-flight mass spectrometry, has proved effective in discriminating among gums from different genera, as well as among species within the Acacia genus. In this study, the previously built Acacia database was expanded, principal component analysis (PCA) was used to aid in grouping of the samples, and data interpretation was refined following a modified acacieae taxonomy. Application of the analytical strategy to investigate the paint binders in artworks from ancient Egypt allowed qualitative discrimination of gums at a species level, and provided new insights into the artists' material choices.
Asunto(s)
Pintura , Polisacáridos , Análisis de Componente Principal , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción , Pintura/análisis , Pintura/historia , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción/métodos , Polisacáridos/química , Polisacáridos/análisis , Análisis Multivariante , Egipto , Antiguo Egipto , Historia AntiguaRESUMEN
BACKGROUND: Lead (Pb) in house dust contributes significantly to blood lead levels (BLLs) in children which may result in dire health consequences. Assessment of house dust Pb in the United States, relationships with Pb in soil and paint, and residential factors influencing Pb concentrations are essential to probing drivers of house dust Pb exposure. OBJECTIVE: Pb concentrations in vacuum-collected house dust are characterized across 346 homes participating in the American Health Homes Survey II (AHHS II), a US survey (2018-2019) evaluating residential Pb hazards. Connections between house dust Pb and soil Pb, paint Pb, and other residential factors are evaluated, and dust Pb concentration data are compared to paired loading data to understand Pb hazard standard implications. RESULTS: Mean and median vacuum dust Pb concentrations were 124 µg Pb g-1 and 34 µg Pb g-1, respectively. Vacuum-collected dust concentrations and dust wipe Pb loading rates were significantly correlated within homes (α < 0.001; r ≥ 0.4). At least one wipe sample exceeded current house dust Pb loading hazard standards (10 µg ft-2 or 100 µg Pb ft-2 for floors and windowsills, respectively) in 75 of 346 homes (22%). House dust Pb concentrations were correlated with soil Pb (r = 0.64) and Pb paint (r = 0.57). Soil Pb and paint Pb were also correlated (r = 0.6). IMPACT: The AHHS II provides a window into the current state of Pb in and around residences. We evaluated the relationship between house dust Pb concentrations and two common residential Pb sources: soil and Pb-based paint. Here, we identify relationships between Pb concentrations from vacuum-collected dust and paired Pb wipe loading data, enabling dust Pb concentrations to be evaluated in the context of hazard standards. This relationship, along with direct ties to Pb in soil and interior/exterior paint, provides a comprehensive assessment of dust Pb for US homes, crucial for formulating effective strategies to mitigate Pb exposure risks in households.
Asunto(s)
Polvo , Exposición a Riesgos Ambientales , Vivienda , Plomo , Pintura , Suelo , Polvo/análisis , Plomo/análisis , Plomo/sangre , Pintura/análisis , Humanos , Estados Unidos , Suelo/química , Exposición a Riesgos Ambientales/análisis , Contaminantes del Suelo/análisis , Monitoreo del Ambiente/métodos , Contaminación del Aire Interior/análisis , Encuestas y Cuestionarios , NiñoRESUMEN
Paint used to coat surfaces in aquatic environments often contain biocides to prevent biofouling, and as these coatings degrade, antifouling paint particles (APPs) end up in aquatic, and especially marine, sediments. However, it is currently unclear what further influence APPs in the sediment have on biotic communities or processes. This study investigates how a variety of commercially-available APPs effect the marine microbial community by spiking different laboratory-manufactured APPs to sediment. Following exposure for 30 and 60 days, APPs caused a clear and consistent effect on the bacterial community composition as determined by 16S metabarcoding. This effect was strongest between 0 and 30 days, but continues to a lesser extent between 30 and 60 days. APPs appear to inhibit the highly diverse, but in general rarer, fraction of the community and/or select for specific community members to become more dominant. 71 antifouling-presence and 454 antifouling-absence indicator taxa were identified by indicator analysis. The difference in the level of classification in these two indicator groups was highly significant, with the antifouling-presence indicators having much higher percentage sequence identity to cultured taxa, while the antifouling-absence indicators appear to be made up of undescribed taxa, which may indicate that APPs act as a proxy for general anthropogenic influence or that APP contamination selects for taxa capable of being cultured. Given the clear and consistent effect APPs have on the surrounding sediment microbial community, further research into how APPs affect sediment functional processes and how such effects scale with concentration is recommended to better assess the wider consequences of these pollutants for marine biogeochemical cycles in the future. SYNOPSIS: Microplastic-paint particles are commonly found in marine sediment but little is known about how these, especially antifouling, paint particles affect sediment microbial communities. This study demonstrates that antifouling paint particles fundamentally alter sediment microbial communities.
Asunto(s)
Incrustaciones Biológicas , Microbiota , Contaminantes Químicos del Agua , Incrustaciones Biológicas/prevención & control , Microplásticos , Plásticos , Pintura/análisis , Contaminantes Químicos del Agua/análisis , Sedimentos Geológicos/químicaRESUMEN
X-ray fluorescence (XRF) spectrometry has been used to measure lead (Pb) in painted surfaces and indoor dusts from 14 rented properties in the city of Plymouth, UK. Lead was detected in 78 out of 164 surfaces measured (and in 69 out of 150 interior surfaces) with an overall median concentration of 7100 mg kg-1 (range from 157 to 139,000 mg kg-1), and was detected in all but two properties that included one building constructed within the last 25 years. Selected measurements on an area basis (n = 48) returned Pb concentrations ranging from below 0.01 to 16.1 mg cm-2 that were significantly correlated with concentrations on a mass basis but with scatter that was attributed to the degree to which leaded paint had been overpainted. As potential measures of Pb exposure, mean concentrations in samples of lint (n = 8) were <15 mg kg-1 while mean concentrations in hoovered dusts (n = 14) were more variable; specifically, mean Pb dust concentrations ranged from â¼20 to 140 mg kg-1 in 13 samples but was â¼4500 mg kg-1 in a property that had recently undergone extensive renovation. Although mean concentrations of Pb in lint or dust were not related to median Pb concentrations in paint, a strong correlation between barium (Ba) and Pb in dusts suggests that paint is the main source of dust Pb. This study indicates that, in most cases, leaded paints historically applied to interior surfaces have been over-coated and pose little risk, provided that surface coatings are in good condition. However, inappropriate practices during renovation can result in significant contamination of dusts. Our findings are likely to be more broadly applicable to the urban rented sector in the UK and landlords and tenants should, therefore, be made aware of government guidance on the safe decoration or remodelling of older properties where leaded paint is pervasive.
Asunto(s)
Polvo , Plomo , Polvo/análisis , Plomo/análisis , Monitoreo del Ambiente/métodos , Pintura/análisis , Reino UnidoRESUMEN
Housing-based lead paint dust is the most common source of lead exposure for US-born children. Although year of housing construction is a critical indicator of the lead hazard to US children, not all housing of the same age poses the same risk to children. Additional information about housing condition is required to differentiate the housing-based lead risk at the parcel level. This study aimed to identify and assess a method for gathering and using observations of exterior housing conditions to identify active housing-based lead hazards at the parcel level. We used a dataset of pediatric blood lead observations (sample years 2000-2013, ages 6-72 months, n = 6,589) to assess associations between observations of exterior housing conditions and housing-based lead risk. We used graphical and Lasso regression methods to estimate the likelihood of an elevated blood lead observation (≥3.5 µg/dL). Our methods estimate a monotonic increase in the likelihood of an elevated blood lead observation as housing conditions deteriorate with the largest changes associated with homes in the greatest disrepair. Additionally we estimate that age of home construction works in consort with housing conditions to amplify risks among those houses built before 1952. Our analysis indicates that a survey of external housing conditions can be used in combination with age of housing in the identification process, at the parcel level, of homes that pose a housing-based lead hazard to children.
Asunto(s)
Intoxicación por Plomo , Plomo , Niño , Humanos , Lactante , Preescolar , Plomo/análisis , Intoxicación por Plomo/epidemiología , Intoxicación por Plomo/etiología , Calidad de la Vivienda , Exposición a Riesgos Ambientales/análisis , Vivienda , Polvo/análisis , Pintura/análisisRESUMEN
Lead chromate was commonly employed as a pigment in coloured road markings until restrictions led to the development of safer alternatives. In this study, the presence and concentrations of Pb and Cr have been determined in 236 road paints of various colours sampled from streets, highways, footways and carparks from eleven European countries. According to energy-dispersive X-ray fluorescence spectrometry, Pb was detected (>10 mg kg-1) in 148 samples at concentrations up to 17.2% by weight, and above 1000 mg kg-1 yellow was the dominant paint colour. Lead concentrations on an area basis varied from 0.02 to 8.46 mg cm-2 and the metal was located at different depths amongst the samples, suggesting that formulations had been painted both recently and historically (and overpainted). Chromium was detected (>5 to 50 mg kg-1) in 81 samples at concentrations between 20 and 20,000 mg kg-1 and most often in yellow paints, and concentrations co-varied with those of Pb. These observations, and results of scanning electron microscopy coupled with energy-dispersive X-ray spectrometry, suggested that heterogeneously dispersed PbCrO4 was the dominant, but not the only, Pb-based pigment in the samples. Although there were significant international differences in frequency of Pb detection and median Pb concentrations, overall, and despite various, albeit complex, regulations, recent or extant road paint pigmented with Pb and Cr remains a pervasive environmental problem and a potential health risk in many European countries.
Asunto(s)
Cromo , Plomo , Plomo/análisis , Cromo/análisis , Pintura/análisis , Espectrometría por Rayos X , Europa (Continente)RESUMEN
ATR-FTIR (attenuated total reflection-Fourier-transform infrared) microscopy with imaging is widely used in the heritage field to characterise complex compositions of paint cross-sections. However, some limitations include the need for ATR crystal contact with the sample and the inability to resolve particle size below the IR diffraction limit. Recently, a novel O-PTIR (optical-photothermal infrared) spectroscopy technique claimed to open a new avenue for non-invasive, efficient, and reliable analysis at sub-micron resolution. O-PTIR produces transmission-like FTIR spectra for interpretation, without the need to touch the sample, which are highly favourable attributes for analysing heritage samples. This paper reports the comparison of O-PTIR and ATR-FTIR techniques applied to a cross-section embedding a thin paint fragment that delaminated from a late 19th to early 20th-century oil portrait. The hazy paint fragment consisted of zinc soaps (both crystalline and amorphous), gordaite (NaZn4Cl(OH)6SO4·6H2O), and zinc lactate, that could not all be well-resolved with ATR-FTIR imaging. With O-PTIR analysis, the degradation compounds could be resolved at sub-micron resolution with an equivalent or better signal-to-noise ratio. This case study shows how the two techniques can be used to obtain comprehensive information at a broad level with ATR-FTIR and a detailed level with O-PTIR.
Asunto(s)
Pintura , Jabones , Lactatos , Pintura/análisis , Espectroscopía Infrarroja por Transformada de Fourier/métodos , ZincRESUMEN
BACKGROUND: Lead paint remains a major potential source of lead poisoning globally, but there has been no documentation on lead content in solvent paints available on the markets in Zimbabwe and Botswana. AIM: To determine the lead content of solvent-based paints available on the market in Zimbabwe and Botswana and identify a need for a larger study to inform policy. METHODS: This pilot study was conducted in Harare, Zimbabwe, and Gaborone, Botswana. Popular brands of solvent-based household paints were bought from hardware shops in Harare (10 samples) and Gaborone (19 samples). Samples were analysed for lead content using inductively coupled plasma-atomic emission spectrometry. RESULTS: Seventy percent of samples from Zimbabwe were found to contain lead above 90 parts per million (ppm), the recommended regulatory limit, with ranges from less than 60 ppm to 12 000 ppm. Twenty percent of Zimbabwean samples had lead levels above 10 000 ppm. No samples from Botswana had lead concentration above the detection limit, with all levels below 100 ppm. LESSON LEARNT: Data strongly suggest very high lead content in popular brands of solvent paints in Zimbabwe, indicating a need for a larger, well-designed study for policy direction.
Asunto(s)
Plomo , Pintura , Botswana , Humanos , Plomo/análisis , Pintura/análisis , Proyectos Piloto , Solventes , ZimbabweRESUMEN
Automotive paint is one of the most important evidence in solving vehicle-related criminal cases. It contains the critical information about the suspected vehicle, providing essential clues for the investigation. In this study, a novel approach based on optical coherence tomography combined with multivariate statistical methods was proposed to facilitate rapid, accurate and nondestructive identification of different brands of automotive paints. 164 automotive paint samples from 8 different manufacturers were analyzed by a spectral-domain optical coherence tomography system (SD-OCT). Two-dimensional cross-sectional OCT images and three-dimensional OCT reconstruction of vehicle paints of different paints were obtained to show the internal structural differences. Visual discrimination of A-scan data after registration and averaging processing was first used to distinguish different samples. An scanning electron microscope was utilized to obtain the cross-sectional image of the sample to evaluate the effectiveness of OCT technique. Then the original A-scan data, first derivative data and second derivative data of 136 paints with four layers from 7 different manufacturers were collected. Multivariate statistical methods, including principal component analysis (PCA), multi-layer perceptron (MLP), k-nearest neighbor (KNN) algorithm and Bayes discriminant analysis (BDA), were used to analyze different datasets. The results show the hybrid PCA and BDA model based on the first derivative OCT data achieved the best result of 100% accuracy on the testing dataset for identifying automotive paints. It is demonstrated that the OCT technique combined with multivariate statistics could be a promising method for identifying the automotive paints rapidly and accurately.
Asunto(s)
Pintura , Tomografía de Coherencia Óptica , Tomografía de Coherencia Óptica/métodos , Teorema de Bayes , Pintura/análisis , Medicina Legal , Análisis de Componente PrincipalRESUMEN
An archaeological excavation in Prostejov (Czech Republic) revealed a workshop of a local potter with colourless, pink, and blue powders presumably used to produce faience/surface decoration. A comprehensive analytical study, which combined elemental and molecular analysis techniques, was performed to shed light on the chemical composition of these unique findings. Scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM EDX), inductively coupled-plasma mass spectrometry (ICP MS), flow injection analysis (FIA) with electrospray ionisation mass spectrometry (ESI MS), laser desorption ionisation mass spectrometry (LDI MS), and Raman spectroscopy were applied to reveal the elemental composition of the powders and identify the colouring agents in the pink and blue powders. The colouring agents in the pink powder were probably iron and the agent in the blue powder is Prussian blue. On top of that, it was also possible to determine the organic additives in these powders through pyrolysis gas chromatography with mass spectrometric detection (Py GC/MS), atmospheric solids analysis probe ion mobility mass spectrometry (ASAP IM MS), and LDI MS. The organic constituents were identified as plant resin, beeswax, and fats. These results point to the preparation of faience/pigment mixtures as oil paint.
Asunto(s)
Pintura , Espectrometría de Masa por Ionización de Electrospray , Colorantes/análisis , Cromatografía de Gases y Espectrometría de Masas/métodos , Pintura/análisis , Polvos , Espectrometría de Masa por Ionización de Electrospray/métodosRESUMEN
This paper contributes to current debates on the technologies and practices of prehistoric artists using the rock art site of el Carche (Jalance, Spain) as a case study. The site preserves both Levantine and Schematic paintings, yet poorly understood from an analytical point of view. In the past, it has even been argued how little differentiation there is between these two post-Paleolithic traditions in terms of paint composition. Our aim with this paper was to identify pigments, paint recipes and technologies and decipher the order of the superimpositions, both between Levantine motifs of different styles, and between these and the Schematic ones. To do so, we adopted a multi-stage and multi-technical analytical strategy, trying to find a balance between sound scientific investigation and impact on the art, considering the irreplaceable nature of this World Heritage rock art. As such, our approach begins with in situ non-invasive investigations using portable EDXRF, to then collect micro-samples for non-destructive analyses by means of Optical Microscopy, Scanning Electron Microscopy coupled with Energy Dispersive X-Ray Spectroscopy (SEM-EDX), micro-Raman Spectroscopy and Fourier Transform Infrared Spectroscopy (FTIR). One of the key highlights of these paper is the identification of up to four different paint compositions, produced with various hematite-based raw materials and different processing techniques. This variability had not been previously documented. Interestingly though, no direct correlations appear to exist between styles or sub-styles and recipes. Some of these paint mixtures were even shared by both traditions. These results are discussed in cultural terms, challenging previous interpretations suggesting a similar pigment composition between Levantine and Schematic art. Microstratigraphic analysis of the cross-sections only partially clarified the overlapping sequence unveiling the complexity of these analysis. They also revealed several degradation layers and external crusts related to rock alteration processes and biological formations. Their role in rock art conservation is also discussed.
Asunto(s)
Colorantes , Pinturas , Colorantes/química , Microscopía Electrónica de Rastreo , Pintura/análisis , EspañaRESUMEN
Butanol is a common organic solvent used in latex paint, and one of its isomers, tert-butanol, is toxic and can cause potential harm to the human body. Therefore, it is of great significance to develop a qualitative and quantitative detection method for butanol isomers. In this study, we combined the advantages of rapid detection of proton transfer reaction mass spectrometry (PTR-MS) with the separation and qualitative capabilities of gas chromatography-mass spectrometry (GC-MS) to achieve the detection of isomers, building a fast gas chromatography proton transfer reaction mass spectrometry (FastGC-PTR-MS) equipment. Firstly, the developed technology was optimized using standard samples of several common volatile organic compounds. The retention times of acetonitrile, acetone, and alcohols were less than 50 s, and the retention times of the benzene series were less than 110 s, on the premise that these isomers could be basically separated (resolution R > 1.0). Compared with a commercial GC-MS equipment, the detection times were shortened by 5-6 times and 2-4 times, respectively. Then the FastGC-PTR-MS was applied to detect the isomers of butanol in latex paint. The results showed that the headspace of brand D latex paint mainly contained five substances: tert-butanol, n-butanol, acetaldehyde, methanol, and acetone. Tert-butanol and n-butanol could be completely separated (R > 1.5). The concentration of tert-butanol was 4.41 ppmv, far below the 100 ppmv maximum allowable workplace concentration. The developed FastGC-PTR-MS can be used for rapid qualitative and quantitative detection of butanol isomers in latex paint. The new equipment has the potential to play an important role in indoor environmental safety applications.
Asunto(s)
Butanoles , Látex , Pintura , Butanoles/análisis , Cromatografía de Gases y Espectrometría de Masas/métodos , Humanos , Látex/química , Pintura/análisisRESUMEN
Undertaking the conservation of artworks informed by the results of molecular analyses has gained growing importance over the last decades, and today it can take advantage of state-of-the-art analytical techniques, such as mass spectrometry-based proteomics. Protein-based binders are among the most common organic materials used in artworks, having been used in their production for centuries. However, the applications of proteomics to these materials are still limited. In this work, a palaeoproteomic workflow was successfully tested on paint reconstructions, and subsequently applied to micro-samples from a 15th-century panel painting, attributed to the workshop of Sandro Botticelli. This method allowed the confident identification of the protein-based binders and their biological origin, as well as the discrimination of the binder used in the ground and paint layers of the painting. These results show that the approach is accurate, highly sensitive, and broadly applicable in the cultural heritage field, due to the limited amount of starting material required. Accordingly, a set of guidelines are suggested, covering the main steps of the data analysis and interpretation of protein sequencing results, optimised for artworks.
Asunto(s)
Pinturas , Espectrometría de Masas , Pintura/análisis , Pinturas/historia , Proteínas , ProteómicaRESUMEN
There is a considerable interest in developing new analytical tools to fight the illicit trafficking of heritage goods and particularly of easel paintings, whose high market values attract an ever-increasing volume of criminal activities. The objective is to combat the illicit traffic of smuggled or forged paintworks and to prevent the acquisition of fakes or looted artefacts in public collections. Authentication can be addressed using various investigation techniques, such as absolute dating, materials characterization, alteration phenomena, etc.; for paintings this remains a challenging task due to the complexity of the materials (paint layers, ground, varnish, canvas, etc.) and preferable use of non-destructive methods. This paper outlines results from concerted action on detecting forged works of art within the framework of a Coordinated Research Project of the International Atomic Energy Agency (IAEA) called Enhancing Nuclear Analytical Techniques to Meet the Needs of Forensic Sciences1. One of the main objectives is to foster the use of emerging Nuclear Analytical Techniques (NAT) using particle accelerators for authentication of paintings, with potential application to other forensics domains, by highlighting their ability to determine painting authenticity and to track restorations or anachronistic clues. The various materials comprising a test painting were investigated using an array of NAT. Binder, canvas and support were directly dated by 14C using Accelerator Mass Spectrometry (14C-AMS); binder and pigments' molecular composition was determined using Secondary Ion Mass Spectrometry with MeV ions (MeV-SIMS); paint layer composition and stratigraphy were accurately determined using Ion Beam Analysis (IBA) and differential Particle-Induced X-ray Emission (PIXE); and pigment spatial distributions were mapped using full-field PIXE. High resolution Optical Photothermal Infrared Spectroscopy (O-PTIR) molecular imaging was also exploited. Obtained results are presented and discussed. It is shown that the combination of the above-mentioned techniques allowed reconstructing the history of the test painting.
Asunto(s)
Pinturas , Iones , Espectrometría de Masas , Pintura/análisis , Rayos XRESUMEN
Maintenance of maritime vessels includes the removal of paint from hulls that are sources of metals, antifouling paint particles (APPs) and microplastics (MPs) that end up in the coastal environment. Simon's Town is a small urban town in False Bay, Cape Town, South Africa, where maritime activities take place (there is a naval harbour, marina and shipyard). The aim of this study was to measure metals, APPs and MPs in Simon's Town, to assess the impact of maritime activities and a storm water pipe in a sheltered marina. Sediment samples were collected from six sites during winter 2018. Sediment and extracted APPs were analysed for metal concentrations (Al, As, B, Ba, Cd, Co, Cr, Cu, Hg, Mo, Ni, Pb, Se, Sb, Sn, Sr, V and Zn) and MPs characterised based on type (shape and polymer), colour and size. Highest average metal concentrations in sediment for all sites were Fe (32228 ± SEM 4024), Al (12271 ± 1062) and Cu (1129 ± 407). Metals in paint particles were highest for Fe (80873 ± 19341), Cu (66762 ± 13082) and Zn (44910 ± 1400 µg/g). Metal and MP fragment concentrations were highest at the slipway of the shipyard, decreasing with increased distance from the slipway. MP filaments were highest close to the storm water outfall pipe. Our results suggest that shipyards are potential sources of metals and MP fragments (mainly APPs), with storm water pipes potential sources of MP filaments. Various indices applied to assess the potential impacts of metals and MPs suggest that these contaminants have the potential to adversely impact the intertidal ecosystem investigated.