A perylene diimide probe for NIR-II fluorescence imaging guided photothermal and type I/type II photodynamic synergistic therapy.

Phototherapy has garnered significant attention in the past decade. Photothermal and photodynamic synergistic therapy combined with NIR fluorescence imaging has been one of the most attractive treatment options because of the deep tissue penetration, high selectivity and excellent therapeutic effect. Benefiting from the superb photometrics and ease of modification, perylene diimide (PDI) and its derivatives have been employed as sensing probes and therapeutic agents in the biological and biomedical research fields, and exhibiting excellent potential. Herein, we reported the development of a novel organic small-molecule phototherapeutic agent, PDI-TN. The absorption of PDI-TN extends into the NIR region, which provides feasibility for NIR phototherapy. PDI-TN overcomes the traditional Aggregation-Caused Quenching (ACQ) effect and exhibits typical characteristics of Aggregation-Induced Emission (AIE). Subsequently, PDI-TN NPs were obtained by using an amphiphilic triblock copolymer F127 to encapsulate PDI-TN. Interestingly, the PDI-TN NPs not only exhibit satisfactory photothermal effects, but also can generate O2•- and 1O2 through type I and type II pathways, respectively. Additionally, the PDI-TN NPs emit strong fluorescence in the NIR-II region, and show outstanding therapeutic potential for in vivo NIR-II fluorescence imaging. To our knowledge, PDI-TN is the first PDI derivative used for NIR-II fluorescence imaging-guided photodynamic and photothermal synergistic therapy, which suggests excellent potential for future biological/biomedical applications.

Chemo-photodynamic antitumour therapy based on Er-doped upconversion nanoparticles coated with hypocrellin B and MnO2.

An antitumour chemo-photodynamic therapy nanoplatform was constructed based on phospholipid-coated NaYF4: Yb/Er upconversion nanoparticles (UCNPs). In this work, the amphiphilic block copolymer DSPE-PEG2000 was combined with the surface ligand oleic acid of the UCNPs through hydrophobic interaction to form liposomes with a dense hydrophobic layer in which the photosensitizer hypocrellin B (HB) was assembled. The coated HB formed J-aggregates, which caused a large redshift in the absorption spectrum and improved the quantum efficiency of energy transfer. Furthermore, MnO2 nanosheets grew in-situ on the liposomes through OMn coordination. Therefore, a multifunctional tumour microenvironment (TME)-responsive theranostic nanoplatform integrating photodynamic therapy (PDT) and chemodynamic therapy (CDT) was successfully developed. The results showed that this NIR-mediated chemo-photodynamic therapy nanoplatform was highly efficient for oncotherapy.

Development of a sensitive electrochemical method to determine amitraz based on perylene tetracarboxylic acid/mesoporous carbon/Nafion@SPCEs.

A cutting-edge electrochemical method is presented for precise quantification of amitraz (AMZ), a commonly used acaricide in veterinary medicine and agriculture. Leveraging a lab-made screen-printed carbon electrode modified with a synergistic blend of perylene tetracarboxylic acid (PTCA), mesoporous carbon (MC), and Nafion, the sensor's sensitivity was significantly improved. Fine-tuning of PTCA, MC, and Nafion ratios, alongside optimization of the pH of the supporting electrolyte and accumulation time, resulted in remarkable sensitivity enhancements. The sensor exhibited a linear response within the concentration range 0.01 to 0.70 µg mL-1, boasting an exceptionally low limit of detection of 0.002 µg mL-1 and a limit of quantification of 0.10 µg mL-1, surpassing maximum residue levels permitted in honey, tomato, and longan samples. Validation with real samples demonstrated high recoveries ranging from 80.8 to 104.8%, with a relative standard deviation below 10%, affirming the method's robustness and precision. The modified PTCA/MC/Nafion@SPCE-based electrochemical sensor not only offers superior sensitivity but also simplicity and cost-effectiveness, making it a pivotal tool for accurate AMZ detection in food samples. Furthermore, beyond the scope of this study, the sensor presents promising prospects for wider application across various electrochemical analytical fields, thereby significantly contributing to food safety and advancing agricultural practices.

Perylene-Mediated Cytoskeletal Dysfunction Remodels Cancer-Associated Fibroblasts to Augment Antitumor Immunotherapy.

Targeted reprogramming of cancer-associated fibroblasts (CAFs) is one of the most essential cancer therapies. However, how to reprogram active CAFs toward deactivated state still remains immense challenge. To tackle this challenge, herein, one perylene N, N'-bis(2-((dimethylammonium)ethylene)-2-(methoxylethyl))-1, 6, 7, 12-tetrachloroperylene-3, 4, 9, 10-tetracarboxylic diimide (PDIC-OC) is prepared, which can trigger endogenous reactive oxygen species (ROS) burst to result in cytoskeletal dysfunction and cell apoptosis so that suppress transforming growth factor ß (TGF-ß) production. As a result, PDIC-OC can reprogram the activated CAFs and relieve immunosuppressive tumor microenvironment by efficient polarization of M2-typed macrophages into M1-typed ones, downregulation of alpha-smooth muscle actin (α-SMA), alleviation of hypoxic state to promote infiltration of cytotoxic T lymphocytes, and ultimately realizes outstanding antitumor performance on B16F10 tumor-xenografted and lung-metastatic mouse model even at low concentration of 1 mg kg-1 body weight. This work thus presents a novel strategy that cytoskeleton dysfunction and cell apoptosis cooperatively suppress the secretion of TGF-ß to reprogram CAFs and meanwhile clarifies intrinsic mechanism for perylene-triggered chemo-immunotherapy against hypoxic tumors.

Complexed Photosensitizer of Hypericin with G-Quadruplex: Structure-Dependent Behavior.

Despite the increased interest of visible-light-absorbing compound Hypericin (Hyp) in photodiagnosis, photocatalysis, and photodynamic therapy (PDT) applications, a major obstacle still exists; i.e., the photoactivity is diminished due to the facile aggregation of Hyp in aqueous environment that induces excited-state quenching. Herein, we explore the excited-state property of Hyp bound to the DNA G-quadruplex by combining multiple steady-state and time-resolved spectroscopy. We find that the aggregation-induced quenching effect can be successfully prevented by appropriate G-quadruplex binders that disperse Hyp into monomer. The binding of Hyp/G-quadruplex is selective, however, exhibiting a preferential binding toward parallel G-quadruplexes (c-kit2, C14B1, STAT3, S50, and PS2.M), over antiparallel or hybrid G-quadruplex (Tel22, TBA). The excited-state property of Hyp is highly related to the binding behavior, showing a consistent trend that the better the Hyp/G-quadruplex binding, the longer the triplet 3Hyp* lifetime and the higher the efficiency to produce 1O2. For Hyp/c-kit2, the major binding mode is 5'-end stacking, which offers protection from collisional quenching reactions and ensures a stable photocycle of 3Hyp*-O2 energy transfer forming 1O2, leading to the highest 1O2 quantum yield (0.67) with superior photostability. These findings open possibilities of developing Hyp/G-quadruplex complex as a biocompatible photosensitizer for PDT applications, etc.

A Self-Assembly-Induced Exciton Delocalization Strategy for Converting a Perylene Diimide Derivative from a Type-II to Type-I Photosensitizer.

Type-I photosensitizers have shown advantages in addressing the shortcomings of traditional oxygen-dependent type-II photosensitizers for the photodynamic therapy (PDT) of hypoxic tumors. However, developing type-I photosensitizers is yet a huge challenge because the type-II energy transfer process is much faster than the type-I electron transfer process. Herein, from the fundamental point of view, an effective approach is proposed to improve the electron transfer efficiency of the photosensitizer by lowering the internal reorganization energy and exciton binding energy via self-assembly-induced exciton delocalization. An example proof is presented by the design of a perylene diimide (PDI)-based photosensitizer (PDIMp) that can generate singlet oxygen (1O2) via a type-II energy transfer process in the monomeric state, but induce the generation of superoxide anion (O2˙-) via a type-I electron transfer process in the aggregated state. Significantly, with the addition ofcucurbit[6]uril (CB[6]), the self-assembled PDIMp can convert back to the monomeric state via host-guest complexation and consequently recover the generation of 1O2. The biological evaluations reveal that supramolecular nanoparticles (PDIMp-NPs) derived from PDIMp show superior phototherapeutic performance via synergistic type-I PDT and mild photothermal therapy (PTT) against cancer under either normoxia or hypoxia conditions.

Toward Type I/II ROS Generation Photoimmunotherapy by Molecular Engineering of Semiconducting Perylene Diimide.

As prospective phototheranostic agents for cancer imaging and therapy, semiconducting organic molecule-based nanomedicines are developed. However, near-infrared (NIR) emission, and tunable type I (O2 • -) and type II (1O2) photoinduced reactive oxygen species (ROS) generation to boost cancer photoimmunotherapy remains a big challenge. Herein, a series of D-π-A structures, NIR absorbing perylene diimides (PDIs) with heavy atom bromide modification at the bay position of PDIs are prepared for investigating the optimal photoinduced type I/II ROS generation. The heavy atom effect has demonstrated a reduction of molecular ∆EST and promotion of the intersystem crossing processes of PDIs, enhancing the photodynamic therapy (PDT) efficacy. The modification of three bromides and one pyrrolidine at the bay position of PDI (TBDT) has demonstrated the best type I/II PDT performance by batch experiments and theoretical calculations. TBDT based nanoplatforms (TBDT NPs) enable type I/II PDT in the hypoxic tumor microenvironment as a strong immunogenic cell death (ICD) inducer. Moreover, TBDT NPs showing NIR emission allow in vivo bioimaging guided phototherapy of tumor. This work uses novel PDIs with adjustable type I/II ROS production to promote antitumor immune response and accomplish effective tumor eradication, consequently offering molecular guidelines for building high-efficiency ICD inducers.

Hypericin supramolecular assembles: A way to increase the skin availability and photodynamic efficiency in tumor cells.

Cyclodextrins (CDs) are molecules approved by the FDA and show promise in increasing the solubility of hydrophobic molecules and making them more available to the skin. These CDs have been used to form complexes with some photosensitizers for Photodynamic Therapy (PDT), such as Hypericin (HY). HY is a lipophilic photosensitizer known for its exceptional fluorescence and singlet oxygen quantum yield generation of over 20 % under 590 nm irradiation. In this study, we found a six-fold increase in the release of HY in vitro after complexation with ß-CD. The ß-CDHY assembly also demonstrated better skin retention, which is crucial for the topical application of this photosensitizer. Furthermore, the ß-CD complexation led to a significant increase in the phototoxicity of HY at three different light doses (3, 6, and 10 J cm-2) due to its improved water solubility and higher in vitro accumulation (approximately two times compared with free HY) in HeLa and Vero cell lines.

Effective transport of aggregated hypericin encapsulated in SBA-15 nanoporous silica particles for photodynamic therapy of cancer cells.

Photodynamic therapy (PDT) represents an interesting modality for the elimination of damaged biomaterials and cells. This treatment takes advantage of the photosensitizing properties of molecules that are active only when irradiated with light. In the present work, a dual property of hypericin, a hydrophobic molecule with high performance in photodiagnostics and photodynamic therapy, was exploited. The non-fluorescent and photodynamically inactive form of hypericin aggregates was loaded into the nanopores of SBA-15 silica particles. The synthesized particles were characterized by infrared spectroscopy, thermogravimetry, differential thermal analysis, small-angle X-ray scattering and transmission electron microscopy. Hypericin aggregates were confirmed by absorption spectra typical of aggregated hypericin and by its short fluorescence lifetime. Release of hypericin from the particles was observed toward serum proteins, mimicking physiological conditions. Temperature- and time-dependent uptake of hypericin by cancer cells showed gradual release of hypericin from the particles and active cellular transport by endocytosis. A closer examination of SBA-15-hypericin uptake by fluorescence lifetime imaging showed that aggregated hypericin molecules, characterized by a short fluorescence lifetime (∼4 ns), were still present in the SBA-15 particles upon uptake by cells. However, monomerization of hypericin in cancer cells was observed by extending the hypericin fluorescence lifetime by ∼8 ns, preferentially in lipid compartments and the plasma membrane. This suggests a promising prognosis for delayed biological activity of the entire cargo, which was confirmed by effective PDT in vitro. In summary, this work presents an approach for safe, inactive delivery of hypericin that is activated at the target site in cells and tissues.

Synthesis of chitosan-based perylene dye material for photovoltaic solar-cell application.

Renewable energy, such as solar energy, is infinite, readily available, and has extensive applications. Dye-sensitized solar cells (DSSCs) have been well developed; thus, they can be developed with low production costs, high efficiency, and facile manufacturing techniques. This study proposes a novel chitosan biopolymer-based perylene dye; the dye is modified by chitosan with perylene-3,4,9,10-tetracarboxylic anhydride using a one-pot acylation of nitrogen nucleophiles for DSSCs. The chitosan biopolymer-based perylene dyes were characterized using attenuated total reflection infrared spectroscopy, solid-state 13C CP-TOSS nuclear magnetic resonance spectroscopy, X-ray powder diffraction analysis, thermogravimetric analysis, X-ray photoelectron spectrometry, and high-resolution field-emission scanning electron microscopy. The ultraviolet-visible and fluorescence spectroscopy of chitosan biopolymer-based perylene dye exhibited a red-shift compared with perylene-3,4,9,10-tetracarboxylic anhydride and chitosan. The DSSC properties of chitosan biopolymer-based perylene dye were investigated, and it exhibited a 2.022 % power-conversion efficiency. Thus, this promising chitosan biopolymer-based perylene dye may have potential applications in solar-cell technology.

Effect of perylene assembly shapes on photoelectrochemical properties and ultrasensitive biosensing behaviors toward dopamine.

In this study, a photoelectrochemical (PEC) sensor based on perylene diimide derivatives (PDIs) was developed for the ultrasensitive quantification of dopamine (DA). PDIs were able to form self-assembled semiconductor nanostructures by strong π-π stacking, suitable for photoactive substances. Moreover, the shape of the PDI significantly affected the PEC properties of these nanostructures. The results showed that amino PDI with two-dimensional (2D) wrinkled layered nanostructures exhibited superior PEC properties relative to one-dimensional (1D) nanorods and fiber-based nanostructures (methyl and carboxyl PDIs). Based on these results, a mechanism for PEC sensor action was then proposed. The presence of 2D amino-PDI resulted in accelerated charge separation and transport. Furthermore, dopamine acted as effective electron donor to cause an increase in photocurrent. The as-obtained sensor was then used to detect small molecules like DA. A blue light optimized sensor at an applied potential of 0.7 V showed a detection limit of 1.67 nM with a wide linear range of 5 nM to 10 µM. On the other hand, the sensor presented acceptable reliability in determining DA in real samples. A recovery rate between 97.99 and 101.0% was obtained. Overall, controlling the morphology of semiconductors can influence PEC performance, which is a useful finding for the future development of PEC sensors.

Redistribution of hydrophobic hypericin from nanoporous particles of SBA-15 silica in vitro, in cells and in vivo.

Nanoporous silica is nowadays used in various fields of nano- and micro-materials research. The advantage of nanoporous material is that it can be filled with various hydrophilic and hydrophobic molecules, which are then delivered to the target cells and tissues. In the present study, we have studied the interaction of nanoporous silica with hydrophobic and photodynamically active molecule - hypericin. Hypericin was adsorbed on/in SBA-15 silica, which led to the disappearance of its fluorescence due to hypericin aggregate formation. However, it was observed here that hypericin can be easily redistributed from these particles towards proteins and lipids in serum and cells in vitro and in vivo. Moreover, the charged surface character of SBA-15 pores forced the creation of protein/lipid corona on particles. Such complex enabled monomerization of hypericin on the surface of particles presented by fluorescence in the corona and singlet oxygen production suitable for photodynamic therapy (PDT). The PDT efficacy achieved by introducing the new construct into the PDT protocol was comparable to the efficacy of hypericin PDT. In conclusion, this study demonstrates a promising approach for the delivery of hydrophobic photosensitizers to cancer cells by nanoporous silica using fluorescence techniques.

Fluorescent detection of tartrazine based on the supramolecular self-assembly of cationic perylene diimide.

A cationic perylene probe was designed and synthesized for sensitive determination of tartrazine. In the presence of tartrazine, the fluorescence of the perylene probe was quenched by efficient supramolecular self-assembly of the perylene derivate. The quenching is caused by the synergistic effect of noncovalent interactions including static electricity, π-π stacking, and hydrophobic interaction. Benefiting from these advantages, the probe exhibited excellent sensing performance to tartrazine within 2 min. The detection and quantification limit of tartrazine are as low as 2.42 and 8.07 nmol L-1, respectively, with a wide linear operation range from 15 to 500 nmol L-1. Most importantly, due to the high binding affinity (3.22 × 107 mol L-1) between the perylene probe and tartrazine, the sensing system shows great anti-interference capacity. Subsequently, the visualization application of the approach was evaluated by portable device, and the limits of detection for visual detection for test strip, membrane, and hydrogel were 0.5, 0.5, and 5 µmol L-1, respectively. The approach has been applied to monitor tartrazine in various food condiments with recoveries in the range 91.29-108.83%. As far as we know, this is the first report of using perylene-based probe for tartrazine determination, offering a promising strategy for the construction of perylene-based detection system in the field of food safety.

Synthesis of 1,6/7-(NO2 )2 -Perylenediimide and 1,6/7-(NH2 )2 -Perylenediimide as Regioisomerically Pure Materials.

The use of perylenediimide (PDI) building blocks in materials for organic electronic is of considerable interest. This popular n-type organic semiconductor is tuned by introducing peripheral groups in their ortho and bay positions. Such modifications radically alter their optoelectronic properties. In this article, we describe an efficient method to afford regioisomerically pure 1,6/7-(NO2 )2 - and (NH2 )2 -PDIs employing two key steps: the selective crystallization of 1,6-(NO2 )2 -perylene-3,4,9,10-tetracarboxy tetrabutylester and the nitration of regiopure 1,7-Br2 -PDI with silver nitrite. The optoelectronic properties of the resulting regioisomerically pure dinitro, diamino-PDIs and bisazacoronenediimides (BACDs) are reported and demonstrate the need to separate both regioisomers of such n-type organic semiconductors for their inclusion in advanced optoelectronic devices. For the first time, the two regioisomers of the same PDI starting material are available on the multigram scale, which will stimulate the exploration of regioisomerism/properties relationship for this family of dyes.

Double Hook Perylene Diimide as a New Receptor for PAHs: An Experimental and Theoretical Study.

In a one-step reaction, we prepared a dibenzylamine perylene diimide derivative (PDI). Its double hook structure allows for self-association with a constant of Kd ∼108  M-1 determined by fluorescence. We confirmed its ability to bind PAHs using UV/Vis, fluorescence, and 1 H NMR titrations in CHCl3 . The complex formation signature in UV/vis is a new band at 567 nm. The calculated binding constants (Ka ∼104  M-1 ) follow the trend pyrene>perylene>phenanthrene>naphthalene>anthracene. Theoretical modeling of these systems using DFT ωB97X-D/6-311G(d,p) proved helpful in rationalizing the complex formation and the observed association trend. The distinctive signal in UV/vis is due to a charge transfer in the complex from orbitals in the guest to the host. SAPT(DFT) confirmed that the driving forces in the complex formation are exchange and dispersion (π-π interactions). Still, the recognition ability depends on the electrostatic component of the interaction, a minor fraction.

Preferential molecular recognition of heterochiral guests within a cyclophane receptor.

The discrimination of enantiomers by natural receptors is a well-established phenomenon. In contrast the number of synthetic receptors with the capability for enantioselective molecular recognition of chiral substrates is scarce and for chiral cyclophanes indicative for a preferential binding of homochiral guests. Here we introduce a cyclophane composed of two homochiral core-twisted perylene bisimide (PBI) units connected by p-xylylene spacers and demonstrate its preference for the complexation of [5]helicene of opposite helicity compared to the PBI units of the host. The pronounced enantio-differentiation of this molecular receptor for heterochiral guests can be utilized for the enrichment of the P-PBI-M-helicene-P-PBI epimeric bimolecular complex. Our experimental results are supported by DFT calculations, which reveal that the sterically demanding bay substituents attached to the PBI chromophores disturb the helical shape match of the perylene core and homochiral substrates and thereby enforce the formation of syndiotactic host-guest complex structures. Hence, the most efficient substrate binding is observed for those aromatic guests, e. g. perylene, [4]helicene, phenanthrene and biphenyl, that can easily adapt in non-planar axially chiral conformations due to their inherent conformational flexibility. In all cases the induced chirality for the guest is opposed to those of the embedding PBI units, leading to heterochiral host-guest structures.

Anti-Epstein-Barr Viral Agents from the Medicinal Herb-Derived Fungus Alternaria alstroemeriae Km2286.

Chromatographic separation on the liquid-state fermented products produced by the fungal strain Alternaria alstroemeriae Km2286 isolated from the littoral medicinal herb Atriplex maximowicziana Makino resulted in the isolation of compounds 1-9. Structures were determined by spectroscopic analysis as four undescribed perylenequinones, altertromins A-D (1-4), along with altertoxin IV (5), altertoxin VIII (6), stemphyperylenol (7), tenuazonic acid (8), and allo-tenuazonic acid (9). Compounds 1-6 exhibited antiviral activities against Epstein-Barr virus (EBV) with EC50 values ranging from 0.17 ± 0.07 to 3.13 ± 0.31 µM and selectivity indices higher than 10. In an anti-neuroinflammatory assay, compounds 1-4, 6, and 7 showed inhibitory activity of nitric oxide production in lipopolysaccharide-induced microglial BV-2 cells, with IC50 values ranging from 0.33 ± 0.04 to 4.08 ± 0.53 µM without significant cytotoxicity. This is the first report to describe perylenequinone-type compounds with potent anti-EBV and anti-neuroinflammatory activities.

Remote Control of Dynamic Twistacene Chirality.

We report a reliable way to manipulate the dynamic, axial chirality in perylene diimide (PDI)-based twistacenes. Specifically, we reveal how chiral substituents on the imide position induce the helicity in a series of PDI-based twistacenes. We demonstrate that this remote chirality is able to control the helicity of flexible [4]helicene subunits by UV-vis, CD spectroscopy, X-ray crystallography, and TDDFT calculations. Furthermore, we have discovered that both the chiral substituent and the solvent each has a strong impact on the sign and intensity of the CD signals, highlighting the control of the dynamic helicity in this flexible system. DFT calculations suggest that the steric interaction of the chiral substituents is the important factor in how well a particular group is at inducing a preferred helicity.

Ultrasensitive Detection of Cu(II) and Pb(II) Using a Water-Soluble Perylene Probe.

The selective detection of metal ions in water, using sustainable detection systems, is of crescent importance for monitoring water environments and drinking water safety. One of the key elements of future chemical sciences is the use of sustainable approaches in the design of new materials. In this study, we design and synthesize a low-cost, water-soluble potassium salt of 3,4,9,10-perylene tetracarboxylic acid (PTAS), which shows a selective optical response on the addition of Cu2+ and Pb2+ ions in aqueous solutions. By using a water-soluble chromophore, the interactions with the metal ions are definitely more intimate and efficient, with respect to standard methods employing cosolvents. The detection limits of PTAS for both Cu2+ and Pb2+ are found to be 2 µM by using a simple absorbance mode, and even lower (1 µM) with NMR experiments, indicating that this analyte-probe system is sensitive enough for the detection of copper ions in drinking water and lead ions in waste water. The complexation of PTAS with both ions is supported with NMR studies, which reveal the formation of new species between PTAS and analytes. By combining a low-cost water-soluble chromophore with efficient analyte-probe interactions due to the use of aqueous solutions, the results here obtained provide a basis for designing sustainable sensing systems.

Mechanism of Ultrafast Triplet Exciton Formation in Single Cocrystals of π-Stacked Electron Donors and Acceptors.

Ultrafast triplet formation in donor-acceptor (D-A) systems typically occurs by spin-orbit charge-transfer intersystem crossing (SOCT-ISC), which requires a significant orbital angular momentum change and is thus usually observed when the adjacent π systems of D and A are orthogonal; however, the results presented here show that subnanosecond triplet formation occurs in a series of D-A cocrystals that form one-dimensional cofacial π stacks. Using ultrafast transient absorption microscopy, photoexcitation of D-A single cocrystals, where D is coronene (Cor) or pyrene (Pyr) and A is N,N-bis(3'-pentyl)-perylene-3,4:9,10-bis(dicarboximide) (C5PDI) or naphthalene-1,4:5,8-tetracarboxydianhydride (NDA), results in formation of the charge transfer (CT) excitons Cor•+-C5PDI•-, Pyr•+-C5PDI•-, Cor•+-NDA•-, and Pyr•+-NDA•- in <300 fs, while triplet exciton formation occurs in τ = 125, 106, 484, and 958 ps, respectively. TDDFT calculations show that the SOCT-ISC rates correlate with charge delocalization in the CT exciton state. In addition, time-resolved EPR spectroscopy shows that Cor•+-C5PDI•- and Pyr•+-C5PDI•- recombine to form localized 3*C5PDI excitons with zero-field splittings of |D| = 1170 and 1250 MHz, respectively. In contrast, Cor•+-NDA•- and Pyr•+-NDA•- give triplet excitons in which |D| is only 1240 and 690 MHz, respectively, compared to that of NDA (2091 MHz), which is the lowest energy localized triplet exciton, indicating that the Cor-NDA and Pyr-NDA triplet excitons have significant CT character. These results show that charge delocalization in CT excitons impacts both ultrafast triplet formation as well as the CT character of the resultant triplet states.