RESUMEN
Graphene has shown great potential for improving growth of many plants, but its effect on woody plants remains essentially unstudied. In this work, Pinus tabuliformis Carr. bare-rooted seedlings grown outdoors in pots were irrigated with a graphene solution over a concentration range of 0-50 mg/L for six months. Graphene was found to stimulate root growth, with a maximal effect at 25 mg/L. We then investigated root microstructure and carried out transcript profiling of root materials treated with 0 and 25 mg/L graphene. Graphene treatment resulted in plasma-wall separation and destruction of membrane integrity in root cells. More than 50 thousand of differentially expressed genes (DEGs) were obtained by RNA sequencing, among which 6477 could be annotated using other plant databases. The GO enrichment analysis and KEGG pathway analysis of the annotated DEGs indicated that abiotic stress responses, which resemble salt stress, were induced by graphene treatment in roots, while responses to biotic stimuli were inhibited. Numerous metabolic processes and hormone signal transduction pathways were altered by the treatment. The growth promotion effects of graphene may be mediated by encouraging proline synthesis, and suppression of the expression of the auxin response gene SMALL AUXIN UP-REGULATED RNA 41 (SAUR41), PYL genes which encode ABA receptors, and GSK3 homologs.
Asunto(s)
Regulación de la Expresión Génica de las Plantas/efectos de los fármacos , Grafito/farmacología , Pinus/crecimiento & desarrollo , Raíces de Plantas/crecimiento & desarrollo , Perfilación de la Expresión Génica , Microscopía Electrónica de Transmisión , Pinus/efectos de los fármacos , Pinus/genética , Pinus/ultraestructura , Raíces de Plantas/efectos de los fármacos , Raíces de Plantas/genética , Raíces de Plantas/ultraestructura , Plantones/efectos de los fármacos , Plantones/genética , Plantones/crecimiento & desarrollo , Plantones/ultraestructura , Transcriptoma/efectos de los fármacosRESUMEN
The remarkable mechanical stability of wood is primarily attributed to the hierarchical fibrous arrangement of the polymeric components. While the mechanisms by which fibrous cell structure and cellulose microfibril arrangements lend stiffness and strength to wood have been intensively studied, the structural origins of the relatively high splitting fracture toughness remain unclear. This study relates cellulose microfibril arrangements to splitting fracture toughness in pine wood cell walls using in situ electron microscopy and reveals a previously unknown toughening mechanism: the specific arrangement of cellulose microfibrils in the cell wall deflects cracks from the S2 layer to the S1/S2 interface, and, once there, causes the crack to be repetitively arrested and shunted along the interface in a zig-zag path. It is suggested that this natural adaptation of wood to achieve tough interfaces and then deflect and trap cracks at them can be generalized to provide design guidelines to improve toughness of high-performance and renewable engineering materials.
Asunto(s)
Pared Celular/metabolismo , Fenómenos Mecánicos , Pinus/citología , Madera/citología , Adaptación Fisiológica , Fenómenos Biomecánicos , Microscopía Electrónica , Pinus/fisiología , Pinus/ultraestructura , Madera/fisiologíaRESUMEN
A group of beads from the artificial cave of La Molina (Lora de Estepa, Sevilla) and Cova del Gegant (Sitges, Barcelona) were made from a biogenic raw material and intentionally covered by a layer of resin. This is the first time this type of treatment has been documented on elements of adornment in the Late Prehistory of the Iberian Peninsula. The composition and nature of the coatings are analysed and the symbolic role of such alterations and imitations of prehistoric adornments is discussed.
Asunto(s)
Ámbar/historia , Pinus/ultraestructura , Arqueología , Fenómenos Geológicos , Historia Antigua , España , Espectrofotometría Infrarroja , Difracción de Rayos XRESUMEN
Plants close their stomata during drought to avoid excessive water loss, but species differ in respect to the drought severity at which stomata close. The stomatal closure point is related to xylem anatomy and vulnerability to embolism, but it also has implications for phloem transport and possibly phloem anatomy to allow sugar transport at low water potentials. Desiccation-tolerant plants that close their stomata at severe drought should have smaller xylem conduits and/or fewer and smaller interconduit pits to reduce vulnerability to embolism but more phloem tissue and larger phloem conduits compared with plants that avoid desiccation. These anatomical differences could be expected to increase in response to long-term reduction in precipitation. To test these hypotheses, we used tridimensional synchroton X-ray microtomograph and light microscope imaging of combined xylem and phloem tissues of 2 coniferous species: one-seed juniper (Juniperus monosperma) and piñon pine (Pinus edulis) subjected to precipitation manipulation treatments. These species show different xylem vulnerability to embolism, contrasting desiccation tolerance, and stomatal closure points. Our results support the hypothesis that desiccation tolerant plants require higher phloem transport capacity than desiccation avoiding plants, but this can be gained through various anatomical adaptations in addition to changing conduit or tissue size.
Asunto(s)
Juniperus/anatomía & histología , Floema/anatomía & histología , Pinus/anatomía & histología , Árboles/anatomía & histología , Xilema/anatomía & histología , Deshidratación , Juniperus/fisiología , Juniperus/ultraestructura , Microscopía , Floema/fisiología , Floema/ultraestructura , Pinus/fisiología , Pinus/ultraestructura , Estomas de Plantas/fisiología , Estomas de Plantas/ultraestructura , Árboles/fisiología , Árboles/ultraestructura , Microtomografía por Rayos X , Xilema/fisiología , Xilema/ultraestructuraRESUMEN
Background and Aims: Mediterranean trees have patterns of cambial activity with one or more pauses per year, leading to intra-annual density fluctuations (IADFs) in tree rings. We analysed xylogenesis (January 2015-January 2016) in Pinus pinea L. and Arbutus unedo L., co-occurring at a site on Mt. Vesuvius (southern Italy), to identify the cambial productivity and timing of IADF formation. Methods: Dendrochronological methods and quantitative wood anatomy were applied and enabled IADF identification and classification. Key Results: We showed that cambium in P. pinea was productive throughout the calendar year. From January to March 2015, post-cambial (enlarging) earlywood-like tracheids were observed, which were similar to transition tracheids. The beginning of the tree ring was therefore not marked by a sharp boundary between latewood of the previous year and the new xylem produced. True earlywood tracheids were formed in April. L-IADFs were formed in autumn, with earlywood-like cells in latewood. In A. unedo, a double pause in cell production was observed, in summer and winter, leading to L-IADFs in autumn as well. Moreover, the formation of more than one IADF was observed in A. unedo. Conclusions: Despite having completely different wood formation models and different life strategies, the production of earlywood, latewood and IADF cells was strongly controlled by climatic factors in the two species. Such cambial production patterns need to be taken into account in dendroecological studies to interpret climatic signals in wood from Mediterranean trees.
Asunto(s)
Ericaceae/crecimiento & desarrollo , Pinus/crecimiento & desarrollo , Tallos de la Planta/crecimiento & desarrollo , Ecología , Ericaceae/fisiología , Ericaceae/ultraestructura , Microscopía , Pinus/fisiología , Pinus/ultraestructura , Tallos de la Planta/fisiología , Estaciones del Año , Árboles/crecimiento & desarrollo , Árboles/fisiología , Árboles/ultraestructura , Madera/crecimiento & desarrollo , Madera/ultraestructura , Xilema/crecimiento & desarrollo , Xilema/fisiologíaRESUMEN
Somatic embryogenesis (SE) is an important biotechnological technique used for the propagation of many pine species in vitro. However, in bog pine, one of the most endangered tree species in the Czech Republic, limitations were observed, which negatively influenced the development and further germination of somatic embryos. Although initiation frequency was very low-0.95 %, all obtained cell lines were subjected to maturation. The best responding cell line (BC1) was used and subjected to six different variants of the maturation media. The media on which the highest number of early-precotyledonary/cotyledonary somatic embryos was formed was supplemented with 121 µM abscisic acid (ABA) and with 6 % maltose. In the end of maturation experiments, different abnormalities in formation of somatic embryos were observed. For visualization and identification of abnormalities in meristem development during proliferation and maturation processes, the environmental scanning electron microscope was used. In comparison to the classical light microscope, the non-commercial environmental scanning electron microscope AQUASEM II has been found as a very useful tool for the quick recognition of apical meristem disruption and abnormal development. To our knowledge, this is the first report discussing somatic embryogenesis in bog pine. Based on this observation, the cultivation procedure could be enhanced and the method for SE of bog pine optimized.
Asunto(s)
Pinus/crecimiento & desarrollo , Germinación , Microscopía Electrónica de Rastreo , Pinus/ultraestructura , Técnicas de Embriogénesis Somática de Plantas , Semillas/crecimiento & desarrollo , Semillas/ultraestructura , HumedalesRESUMEN
Atmospheric vapour pressure deficit (VPD) is the driving force for plant transpiration. Plants have different strategies to respond to this 'atmospheric drought'. Deposited aerosols on leaf surfaces can interact with plant water relations and may influence VPD response. We studied transpiration and water use efficiency of pine, beech and sunflower by measuring sap flow, gas exchange and carbon isotopes, thereby addressing different time scales of plant/atmosphere interaction. Plants were grown (i) outdoors under rainfall exclusion (OD) and in ventilated greenhouses with (ii) ambient air (AA) or (iii) filtered air (FA), the latter containing <1% ambient aerosol concentrations. In addition, some AA plants were sprayed once with 25 mM salt solution of (NH4 )2 SO4 or NaNO3 . Carbon isotope values (δ(13) C) became more negative in the presence of more particles; more negative for AA compared to FA sunflower and more negative for OD Scots pine compared to other growth environments. FA beech had less negative δ(13) C than AA, OD and NaNO3 -treated beech. Anisohydric beech showed linearly increasing sap flow with increasing VPD. The slopes doubled for (NH4 )2 SO4 - and tripled for NaNO3 -sprayed beech compared to control seedlings, indicating decreased ability to resist atmospheric demand. In contrast, isohydric pine showed constant transpiration rates with increasing VPD, independent of growth environment and spray, likely caused by decreasing gs with increasing VPD. Generally, NaNO3 spray had stronger effects on water relations than (NH4 )2 SO4 spray. The results strongly support the role of leaf surface particles as an environmental factor affecting plant water use. Hygroscopic and chaotropic properties of leaf surface particles determine their ability to form wicks across stomata. Such wicks enhance unproductive water loss of anisohydric plant species and decrease CO2 uptake of isohydric plants. They become more relevant with increasing number of fine particles and increasing VPD and are thus related to air pollution and climate change. Wicks cause a deviation from the analogy between CO2 and water pathways through stomata, bringing some principal assumptions of gas exchange theory into question.
Asunto(s)
Fagus/fisiología , Helianthus/fisiología , Pinus/fisiología , Transpiración de Plantas/fisiología , Agua/metabolismo , Aerosoles , Sulfato de Amonio/metabolismo , Atmósfera , Isótopos de Carbono/análisis , Ritmo Circadiano , Sequías , Ambiente , Fagus/ultraestructura , Helianthus/ultraestructura , Nitratos/metabolismo , Pinus/ultraestructura , Hojas de la Planta/fisiología , Hojas de la Planta/ultraestructura , Estomas de Plantas/fisiología , Estomas de Plantas/ultraestructura , Plantones/fisiología , Plantones/ultraestructura , Presión de VaporRESUMEN
Conifers have incurred high mortality during recent global-change-type drought(s) in the western USA. Mechanisms of drought-related tree mortality need to be resolved to support predictions of the impacts of future increases in aridity on vegetation. Hydraulic failure, carbon starvation and lethal biotic agents are three potentially interrelated mechanisms of tree mortality during drought. Our study compared a suite of measurements related to these mechanisms between 49 mature piñon pine (Pinus edulis Engelm.) trees that survived severe drought in 2002 (live trees) and 49 trees that died during the drought (dead trees) over three sites in Arizona and New Mexico. Results were consistent over all sites indicating common mortality mechanisms over a wide region rather than site-specific mechanisms. We found evidence for an interactive role of hydraulic failure, carbon starvation and biotic agents in tree death. For the decade prior to the mortality event, dead trees had twofold greater sapwood cavitation based on frequency of aspirated tracheid pits observed with scanning electron microscopy (SEM), smaller inter-tracheid pit diameter measured by SEM, greater diffusional constraints to photosynthesis based on higher wood δ(13)C, smaller xylem resin ducts, lower radial growth and more bark beetle (Coleoptera: Curculionidae) attacks than live trees. Results suggest that sapwood cavitation, low carbon assimilation and low resin defense predispose piñon pine trees to bark beetle attacks and mortality during severe drought. Our novel approach is an important step forward to yield new insights into how trees die via retrospective analysis.
Asunto(s)
Escarabajos/fisiología , Pinus/fisiología , Estrés Fisiológico , Animales , Arizona , Carbono/fisiología , Sequías , New Mexico , Fotosíntesis/fisiología , Pinus/ultraestructura , Resinas de Plantas , Estudios Retrospectivos , Madera/fisiología , Madera/ultraestructura , Xilema/fisiología , Xilema/ultraestructuraRESUMEN
MAIN CONCLUSION: Co-cultures of Pinus pinaster with Bursaphelenchus xylophilus were established as a biotechnological tool to evaluate the effect of nematotoxics addition in a host/parasite culture system. The pinewood nematode (PWN), Bursaphelenchus xylophilus, the causal agent of pine wilt disease (PWD), was detected for the first time in Europe in 1999 spreading throughout the pine forests in Portugal and recently in Spain. Plant in vitro cultures may be a useful experimental system to investigate the plant/nematode relationships in loco, thus avoiding the difficulties of field assays. In this study, Pinus pinaster in vitro cultures were established and compared to in vivo 1 year-old plantlets by analyzing shoot structure and volatiles production. In vitro co-cultures were established with the PWN and the effect of the phytoparasite on in vitro shoot structure, water content and volatiles production was evaluated. In vitro shoots showed similar structure and volatiles production to in vivo maritime pine plantlets. The first macroscopic symptoms of PWD were observed about 4 weeks after in vitro co-culture establishment. Nematode population in the culture medium increased and PWNs were detected in gaps of the callus tissue and in cavities developed from the degradation of cambial cells. In terms of volatiles main components, plantlets, P. pinaster cultures, and P. pinaster with B. xylophilus co-cultures were all ß- and α-pinene rich. Co-cultures may be an easy-to-handle biotechnological approach to study this pathology, envisioning the understanding of and finding ways to restrain this highly devastating nematode.
Asunto(s)
Biotecnología/métodos , Técnicas de Cocultivo/métodos , Pinus/crecimiento & desarrollo , Enfermedades de las Plantas/parasitología , Tylenchida/fisiología , Animales , Pinus/ultraestructura , Brotes de la Planta/crecimiento & desarrollo , Brotes de la Planta/ultraestructura , Compuestos Orgánicos Volátiles/análisis , AguaRESUMEN
We used Agrobacterium-mediated insertional mutagenesis to identify genes in the ectomycorrhizal fungus Hebeloma cylindrosporum that are essential for efficient mycorrhiza formation. One of the mutants presented a dramatically reduced ability to form ectomycorrhizas when grown in the presence of Pinus pinaster. It failed to form mycorrhizas in the presence of glucose at 0.5 g liter(-1), a condition favorable for mycorrhiza formation by the wild-type strain. However, it formed few mycorrhizas when glucose was replaced by fructose or when glucose concentration was increased to 1 g liter(-1). Scanning electron microscopy examination of these mycorrhizas revealed that this mutant was unable to differentiate true fungal sheath and Hartig net. Molecular analyses showed that the single-copy disrupting T-DNA was integrated 6,884 bp downstream from the start codon, of an open reading frame potentially encoding a 3,096-amino-acid-long protein. This gene, which we named HcMycE1, has orthologs in numerous fungi as well as different other eukaryotic microorganisms. RNAi inactivation of HcMycE1 in the wild-type strain also led to a mycorrhizal defect, demonstrating that the nonmycorrhizal phenotype of the mutant was due to mutagenic T-DNA integration in HcMycE1. In the wild-type strain colonizing P. pinaster roots, HcMycE1 was transiently upregulated before symbiotic structure differentiation. Together with the inability of the mutant to differentiate these structures, this suggests that HcMycE1 plays a crucial role upstream of the fungal sheath and Hartig net differentiation. This study provides the first characterization of a fungal mutant altered in mycorrhizal ability.
Asunto(s)
Proteínas Fúngicas/metabolismo , Regulación Fúngica de la Expresión Génica , Hebeloma/genética , Micorrizas/genética , Pinus/microbiología , Proteínas Fúngicas/genética , Hebeloma/fisiología , Hebeloma/ultraestructura , Microscopía Electrónica de Rastreo , Familia de Multigenes , Mutagénesis Insercional , Micelio , Micorrizas/fisiología , Micorrizas/ultraestructura , Fenotipo , Filogenia , Pinus/ultraestructura , Raíces de Plantas/microbiología , Raíces de Plantas/ultraestructura , Interferencia de ARN , SimbiosisRESUMEN
Cellulose is an important component of cell wall, yet its location and function in pollen tubes remain speculative. In this paper, we studied the role of cellulose synthesis in pollen tube elongation in Pinus bungeana Zucc. by using the specific inhibitor, 2, 6-dichlorobenzonitrile (DCB). In the presence of DCB, the growth rate and morphology of pollen tubes were distinctly changed. The organization of cytoskeleton and vesicle trafficking were also disturbed. Ultrastructure of pollen tubes treated with DCB was characterized by the loose tube wall and damaged organelles. DCB treatment induced distinct changes in tube wall components. Fluorescence labeling results showed that callose, and acidic pectin accumulated in the tip regions, whereas there was less cellulose when treated with DCB. These results were confirmed by FTIR microspectroscopic analysis. In summary, our findings showed that inhibition of cellulose synthesis by DCB affected the organization of cytoskeleton and vesicle trafficking in pollen tubes, and induced changes in the tube wall chemical composition in a dose-dependent manner. These results confirm that cellulose is involved in the establishment of growth direction of pollen tubes, and plays important role in the cell wall construction during pollen tube development despite its lower quantity.
Asunto(s)
Celulosa/biosíntesis , Nitrilos/farmacología , Pinus/efectos de los fármacos , Pinus/crecimiento & desarrollo , Tubo Polínico/crecimiento & desarrollo , Citoesqueleto/efectos de los fármacos , Citoesqueleto/metabolismo , Endocitosis/efectos de los fármacos , Fluorescencia , Germinación/efectos de los fármacos , Glucanos/metabolismo , Pectinas/metabolismo , Pinus/citología , Pinus/ultraestructura , Tubo Polínico/citología , Tubo Polínico/efectos de los fármacos , Tubo Polínico/ultraestructura , Compuestos de Piridinio/metabolismo , Compuestos de Amonio Cuaternario/metabolismo , Espectroscopía Infrarroja por Transformada de Fourier , Factores de TiempoRESUMEN
PREMISE OF THE STUDY: Coniferous bordered pits are some of the most unique and fascinating microstructures of the lignified cell wall. The pit membrane consists of a margo and a torus region, hence facilitating both xylary water transport and also limiting air intrusion by pit aspiration. Additionally, bordered pits have been reported to play a decisive role in the control of rapid liquid flow via the shrinkage and swelling of pectin. The study of the nanostructural chemical composition of pit membranes has been difficult with common imaging/chemical techniques, which involve drying and/or coating of the samples. ⢠METHODS: Using fluorescent tagging and antibodies specific to pectin, and a His-tagged cellulose-binding module that reacts with crystalline cellulose, in combination with confocal laser scanning microscopy (CLSM) and 4Pi microscopy, we generated three-dimensional images of intact pit membranes. ⢠KEY RESULTS: With enhanced resolution in the z-direction of the 4Pi microscope, it was possible to distinguish cellulose in the torus and the margo strands of Pinus strobus. The torus was surrounded by pectin, and a pectin ring was found at the margin of the torus. We also found differences in the structure of the pit membrane between aspirated and unaspirated pits, with a displacement of pectin to form a ring-like structure, the collapse of a void in the interior of the torus, and an apparent change in the chemical structure of cellulosic components, during the aspiration process. ⢠CONCLUSIONS: The 4Pi microscope is well suited to scanning pit membranes to discover previously undescribed anatomical features in bordered pits and can provide information on chemical composition when used in combination with appropriate probes.
Asunto(s)
Membrana Celular/ultraestructura , Microscopía Confocal/métodos , Pinus/ultraestructura , Agua/metabolismo , Anticuerpos , Transporte Biológico , Membrana Celular/química , Membrana Celular/metabolismo , Pared Celular/química , Pared Celular/metabolismo , Pared Celular/ultraestructura , Celulosa/metabolismo , Lignina/metabolismo , Pectinas/metabolismo , Pinus/química , Pinus/metabolismo , Coloración y Etiquetado/métodos , Madera/química , Madera/metabolismo , Madera/ultraestructura , Xilema/química , Xilema/metabolismo , Xilema/ultraestructuraRESUMEN
Ectomycorrhizal associations are of major ecological importance in temperate and boreal forests. The development of a functional ectomycorrhiza requires many genetic and biochemical changes. In this study, suppressive subtraction hybridization was used to identify differentially expressed genes in the roots of maritime pine (Pinus pinaster Aiton) inoculated with Laccaria bicolor, a mycorrhizal fungus. A total number of 200 unigenes were identified as being differentially regulated in maritime pine roots during the development of mycorrhiza. These unigenes were classified into 10 categories according to the function of their homologues in the GenBank database. Approximately, 40 % of the differentially expressed transcripts were genes that coded for unknown proteins in the databases or that had no homology to known genes. A group of these differentially expressed genes was selected to validate the results using quantitative real-time PCR. The transcript levels of the representative genes were compared between the non-inoculated and inoculated plants at 1, 5, 15 and 30 days after inoculation. The observed expression patterns indicate (1) changes in the composition of the wall cell, (2) tight regulation of defence genes during the development of mycorrhiza and (3) changes in carbon and nitrogen metabolism. Ammonium excess or deficiency dramatically affected the stability of ectomycorrhiza and altered gene expression in maritime pine roots.
Asunto(s)
Perfilación de la Expresión Génica , Regulación de la Expresión Génica de las Plantas , Laccaria/fisiología , Micorrizas/fisiología , Pinus/genética , Pinus/microbiología , Simbiosis/genética , Compuestos de Amonio/farmacología , Análisis por Conglomerados , Regulación de la Expresión Génica de las Plantas/efectos de los fármacos , Genes de Plantas/genética , Laccaria/efectos de los fármacos , Laccaria/ultraestructura , Micorrizas/efectos de los fármacos , Pinus/efectos de los fármacos , Pinus/ultraestructura , Reproducibilidad de los Resultados , Plantones/efectos de los fármacos , Plantones/genética , Simbiosis/efectos de los fármacos , Factores de TiempoRESUMEN
Bordered pits are structures in the cell walls of softwood tracheids which permit the movement of water between adjacent cells. These structures contain a central pit membrane composed of an outer porous ring (margo) and an inner dense and pectin-rich disc (torus). The membrane is overarched on each side by pit borders. Pits may be aspirated, a condition where the torus seals against the pit border, effectively blocking the pathway between cells. In living trees this maintains overall continuity of water conduction in xylem by sealing off tracheids containing air. Drying of timber results in further pit aspiration, which reduces wood permeability to liquid treatment agents such as antifungal chemicals. One possible way to increase permeability is by treating wood with pectin lyase to modify or remove the torus. The effectiveness of this treatment was initially evaluated using light microscopy (LM) of toluidine blue stained wood. Pectic material is coloured pink-magenta with this stain, and loss of this colour after treatment has been interpreted as indicating destruction of the torus. However, correlative light (LM) and scanning electron (SEM) microscopic observations of identical areas of toluidine blue stained sections revealed that many unstained pits had intact but modified tori when viewed with SEM. These observations indicate that LM alone is not sufficient to evaluate the effects of pectin lyase on pit membranes in wood. Combining LM and SEM gives more complete information.
Asunto(s)
Microscopía/métodos , Pinus/efectos de los fármacos , Polisacárido Liasas/metabolismo , Madera/efectos de los fármacos , Pinus/ultraestructura , Coloración y Etiquetado/métodos , Madera/ultraestructuraRESUMEN
The present study describes the possibility to polymerize aniline within wood veneers to obtain a semi-conducting material with solid wood acting as the base template. It was determined that it is possible to synthesize the intrinsically conductive polymer (ICP) polyaniline in situ within the wood structure of Southern yellow pine veneers, combining the strength of the natural wood structure with the conductivity of the impregnated polymer. It was found that polyaniline is uniformly dispersed within the wood structure by light microscopy and FT-IR imaging. A weight percent gain in the range of 3-12 wt % was obtained with a preferential formation in the wood structure and cell wall, rather than in the lumen. The modified wood was found to be less hydrophilic with the addition of phosphate doped polyaniline as observed by equilibrium water swelling studies. While wood itself is insulating, the modified veneers had conductivities of 1 × 10(-4) to 1 × 10(-9) S cm(-1), demonstrating the ability to tune the conductivity and allowing for materials with a wide range of applications, from anti-static to charge-dispersing materials. Furthermore, the modified veneers had lower total and peak heat releases, as determined by cone calorimetry, because of the char properties of the ICP. This is of interest if these materials are to be used in building and furniture applications where flame retardance is of importance.
Asunto(s)
Compuestos de Anilina/química , Polimerizacion , Madera/química , Conductividad Eléctrica , Retardadores de Llama , Calor , Peso Molecular , Pinus/química , Pinus/ultraestructura , Soluciones , Espectroscopía Infrarroja por Transformada de Fourier , Factores de Tiempo , Agua/química , Madera/ultraestructuraRESUMEN
Pine cone a natural, low-cost agricultural by-product in Australia has been studied for its potential application as an adsorbent in its raw and hydrochloric acid modified form. Surface study of pine cone and treated pine cone was investigated using Fourier transform infrared (FTIR) and scanning electron microscopy (SEM). The modification process leads to increases in the specific surface area and decreases mean particle sizes of acid-treated pine cone when compared to raw pine cone biomass. Batch adsorption experiments were performed to remove anionic dye Congo red from aqueous solution. It was found that the extent of Congo red adsorption by both raw pine cone biomass and acid-treated biomass increased with initial dye concentration, contact time, temperature but decreased with increasing solution pH and amount of adsorbent of the system. Overall, kinetic studies showed that the dye adsorption process followed pseudo-second-order kinetics based on pseudo-first-order and intra-particle diffusion models. The different kinetic parameters including rate constant, half-adsorption time, and diffusion coefficient were determined at different physico-chemical conditions. Equilibrium data were best represented by Freundlich isotherm model among Langmuir and Freundlich adsorption isotherm models. It was observed that the adsorption was pH dependent and the maximum adsorption of 32.65 mg/g occurred at pH of 3.55 for an initial dye concentration of 20 ppm by raw pine cone, whereas for acid-treated pine cone the maximum adsorption of 40.19 mg/g for the same experimental conditions. Freundlich constant 'n' also indicated favourable adsorption. Thermodynamic parameters such as ∆G(0), ∆H(0), and ∆S(0) were calculated. A single-stage batch absorber design for the Congo red adsorption onto pine cone biomass also presented based on the Freundlich isotherm model equation.
Asunto(s)
Ácidos/química , Aniones/aislamiento & purificación , Colorantes/aislamiento & purificación , Rojo Congo/aislamiento & purificación , Pinus/química , Purificación del Agua/métodos , Adsorción , Biodegradación Ambiental , Biomasa , Difusión , Concentración de Iones de Hidrógeno , Cinética , Modelos Químicos , Tamaño de la Partícula , Pinus/ultraestructura , Polvos , Soluciones , Espectroscopía Infrarroja por Transformada de Fourier , Termodinámica , Factores de TiempoRESUMEN
This work comprises the structural characterization of Eucalyptus and Pinus radiata pulp fibers and their corresponding fibrillated materials, based on quantitative electron microscopy techniques. Compared to hardwood fibers, the softwood fibers have a relatively open structure of the fiber wall outer layers. The fibrillation of the fibers was performed mechanically and chemi-mechanically. In the chemi-mechanical process, the pulp fibers were subjected to a TEMPO-mediated oxidation to facilitate the homogenization. Films were made of the fibrillated materials to evaluate some structural properties. The thicknesses and roughnesses of the films were evaluated with standardized methods and with scanning electron microscopy (SEM), in backscattered electron imaging mode. Field-emission SEM (FE-SEM) and transmission electron microscopy (TEM) were performed to quantify the nanofibril morphology. In this study, we give additional and significant evidences about the suitability of electron microscopy techniques for quantification of nanofibril structures. In addition, we conclude that standard methods are not suitable for estimating the thickness of films having relatively rough surfaces. The results revealed significant differences with respect to the morphology of the fibrillated material. The differences are due to the starting raw material and to the procedure applied for the fibrillation.
Asunto(s)
Celulosa/análisis , Celulosa/ultraestructura , Eucalyptus/química , Eucalyptus/ultraestructura , Pinus/química , Pinus/ultraestructura , Microscopía Electrónica/métodos , Nanofibras/análisis , Nanofibras/ultraestructuraRESUMEN
3D surface profiling and high resolution imaging were performed to refine the Florin rings and epicuticular wax crystals of Pinus koraiensis needles. Needles were collected from four-year-old seedlings and air-dried for surface observations. Field emission scanning electron microscopy revealed that stomata were found on the abaxial (lower) surface of needles. Measured as ca. 40 µm long, they were largely elliptical or oval-shaped. Epicuticular wax crystals were present in the epistomatal chambers as well as on the surrounding epidermis. Rodlets were prevalently found on the stomatal bands and furrows as well as within the epistomatal chambers. The presence of wax tubules was ascertained by the distinct terminal openings at their ends. The occurrence of wax ridges was evident on the epidermis near the saw-tooth margins (nonstomatal areas). No distinct wax ridges were detected on the dewaxed needles. Raised Florin rings were distinct on the stomata. White light scanning interferometry showed that the diameter and width of stomata were ca. 44.02 ± 3.33 µm and 32.10 ± 3.30 µm, respectively. Measured from the neighboring epidermis to the stomatal aperture, the mean height of the stoma reached ca. 6.23 ± 1.28 µm. Focus variation metrology allowed measuring the mean elevation angle of the stoma, reaching ca. 41.41 ± 11.25°. This is the first report on a novel approach to the establishment of quantitative criteria of Florin ring classification by nontactile 3D surface profiling beyond the previous qualitative descriptions of Florin rings of coniferous species.
Asunto(s)
Pinus/ultraestructura , Epidermis de la Planta/ultraestructura , Hojas de la Planta/ultraestructura , Imagenología Tridimensional , Microscopía Electrónica de Rastreo , Propiedades de SuperficieRESUMEN
High-resolution imaging and quantitative surface analysis of epicuticular waxes and epistomatal chambers of pine species were performed by field emission scanning electron microscopy and white light scanning interferometry. Both juvenile and adult needles were collected from the two-year-old seedlings of Pinus rigida and Pinus densiflora and subjected to surface observations. Epicuticular wax structures developed on the cuticle layer as well as in the epistomatal chambers and appeared to occlude the cavities in the two pine species. The stomata of P. densiflora were characterized by more distinctly raised rings around openings than P. rigida. The most common epicuticular wax structures of the two pine species included tubules with terminal openings and coiled rodlets. Wax platelets were deposited on epistomatal chambers. Either rodlets or tubules seemed to be longer and thicker in P. rigida than those in P. densiflora. White light scanning interferometry revealed quantitative surface profiles, demonstrating more ridged (ca. 4 µm high) stomatal apertures and nearly twofold deeper (ca. 20 µm deep) epistomatal chambers of P. densiflora than those of P. rigida. These results suggest that white light scanning interferometry can be applied to unravel the quantitative surface features of epicuticular sculptures on plant leaves.
Asunto(s)
Pinus/ultraestructura , Epidermis de la Planta/ultraestructura , Estomas de Plantas/ultraestructura , Ceras/química , Interferometría , Microscopía Electrónica de Rastreo , Pinus/anatomía & histología , Epidermis de la Planta/anatomía & histología , Estomas de Plantas/anatomía & histologíaRESUMEN
Studies on membrane fusion in living cells indicate that initiation of membrane fusion is a transient and hard to capture process. Despite previous research, membrane behaviour at this point is still poorly understood. Recent palaeobotanical research has revealed snapshots of membrane fusion in a 15-million-year-old fossil pinaceous cone. To reveal the membrane behaviour during the fusion, we conducted more observations on the same fossil material. Several discernible steps of membrane fusion have been fixed naturally and observed in the fossil material. This observation provides transmission electron microscope (TEM) images of the transient intermediate stage and clearly shows the relationship between membranes. Observing such a transient phenomenon in fossil material implies that the fixing was most likely accomplished quickly by a natural process. The mechanism behind this phenomenon is clearly worthy of further enquiry.