Evaluation of various obturation techniques with bioceramic sealers in 3D-printed C-shaped canals.

This in vitro study compared various obturation techniques with bioceramic sealers for filling C-shaped 3D-printed replicas. A mandibular molar with a C-shaped root canal with a C1 configuration was obtained. After instrumenting with M3 Pro Gold files (United Dental, Shanghai, China) up to size #30/0.04, a CBCT scan of the tooth was taken. Sixty 3D-printed replicas of the tooth were created. The samples were obturated with EndoSeal TCS sealer (E. TCS; Maruchi, Wonju, Korea) or EndoSeal MTA (E. MTA; Maruchi, Wonju, Korea) (n = 30). The samples in each group were obturated with the following techniques (n = 10): (1) single-cone technique (SC), (2) SC with ultrasonic activation (UA), and (3) cold hydraulic compaction (CHC). Following incubation, the replicas' apical, middle, and coronal thirds were inspected under a digital microscope, and the proportion of filling material and void were calculated. Also, the obturation time and sealer extrusion were recorded. Data were analyzed using ANOVA, LSD post-hoc, and the chi-square tests (α = 0.05). The results indicated that in the apical third, E. TCS-SC, E. TCS-UA, and E. MTA-UA had the lowest void percentage among groups (p < 0.05). In the middle thirds, samples obturated with E. TCS-UA showed a significantly lower void percentage among all groups (p < 0.05). However, in the coronal third, E. TCS-CHC showed the least void percentage (p < 0.05), followed by E. TCS-UA and E. MTA-CHC. The E. TCS-SC and E. TCS-UA were the least time-consuming methods (p < 0.05). Sealer extrusion significantly differed among the groups, with E. MTA-UA and E. TCS-UA showing higher incidence (p = 0.019). It was concluded that E. TCS-UA was the most convenient obturation technique. However, care must be taken when obturating the canals with high flow and ultrasonic activation near the vital anatomical landmarks.

Bacterial sealing ability of calcium silicate-based sealer for endodontic surgery: an in-vitro study.

BACKGROUND: Apical surgery with standard retrograde maneuvers may be challenging in certain cases. Simplifying apical surgery to reduce operating time and streamline retrograde manipulation is an emerging need in clinical endodontics. AIM OF THE STUDY: The aim of the study was to compare the bacterial sealing ability of a calcium silicate-based sealer with the single cone technique combined with root end resection only, and calcium silicate-based sealer as a retrograde filling versus MTA retrofilling, and to analyze bacterial viability using confocal laser scanning microscope (CLSM). MATERIALS AND METHODS: In this in vitro experimental study, 50 extracted human maxillary incisor teeth were instrumented and randomly divided into five groups: three experimental groups, a positive control group, and a negative control group (n = 10/group). In the experimental groups, the roots were obturated using the single cone technique (SCT) and a calcium silicate-based sealer. In group 1, the roots were resected 3 mm from the apex with no further retrograde preparation or filling. In groups 2 and 3, the roots were resected, retroprepared, and retrofilled with either a calcium silicate-based sealer or MTA, respectively. Group 4 (positive control) was filled with a single gutta-percha cone without any sealer. In group 5 (negative control), the canals were left empty, and the roots were sealed with wax and nail varnish. A bacterial leakage model using Enterococcus faecalis was employed to assess the sealing ability over a 30-day period, checking for turbidity and analyzing colony forming units (CFUs) per milliliter. Five specimens from each group were examined using CLSM for bacterial viability. Data for the bacterial sealing ability were statistically analyzed using chi-squared and Kruskal-Wallis tests. RESULTS: The three experimental groups did not show significant differences in terms of bacterial leakage, or bacterial counts (CFUs) (P > 0.05). However, significant differences were observed when comparing the experimental groups to the positive control group. Notably, the calcium silicate-based sealer, when used as a retrofilling, yielded the best sealing ability. CLSM imaging revealed viable bacterial penetration in all the positive control group specimens while for the experimental groups, dead bacteria was the prominent feature seen. CONCLUSION: Within the limitations of this study, it could be concluded that the bacterial sealing ability of calcium silicate-based sealer with the single cone technique combined with root end resection only and calcium silicate-based sealer as a retrograde filling were comparable with MTA retrofilling during endodontic surgical procedures.

Effects of different irrigation activation methods on root canal treatment of primary teeth.

There is currently a lack of research on the application of newly developed irrigation techniques in root canal treatment of primary teeth. This study aimed to evaluate the effects of various irrigation activation techniques on two key parameters: apical debris extrusion (ADE) and dentinal tubule penetration depth (DTPD) of the root canal filling material. A total of 96 primary mandibular second molars were randomly divided into 4 groups: Group 1-Conventional Needle Irrigation (CNI), Group 2-XP-Endo Finisher (XPF), Group 3-EndoActivator (EA), and Group 4-Passive Ultrasonic Irrigation (PUI). In all groups, the One Reci single-file system was used for root canal preparation. For ADE measurement, each group was rinsed with distilled water. For DTPD assessment, sodium hypochlorite (NaOCl) was applied. ADE quantification was performed by collecting debris in pre-weighed Eppendorf tubes. A combination of fluorescent dye and root canal filling material (DiaPex Plus) was used for root canal filling. In order to examine DTPD, horizontal cross-sections of the coronal and apical regions of the teeth were taken with a thickness of 1 mm. The maximum and mean DTPD was examined by confocal laser scanning microscopy. Data were analyzed using the Kruskal-Wallis, One-way ANOVA, and Mann-Whitney U tests (p = 0.05). As a result, PUI had the highest mean ADE and CNI had the lowest mean ADE, while CNI had the highest mean DTPD in both the coronal and apical regions, whereas PUI had the lowest mean DTPD in the coronal region, and EA had the lowest mean DTPD in the apical region. There were no statistically significant differences in DTPD and ADE among the four groups. Comparing intragroup maximum DTPD across all groups, it was significantly higher in the coronal region than in the apical region (p < 0.05). ADE and DTPD of root canal filling materials in primary teeth did not differ significantly among CNI, XPF, EA and PUI irrigation activation techniques.

Deciduous pulp tissue implantation into the root canal of mandibular incisor resulted in pulp revascularization: a case report with a 5-year follow-up.

To explore a new method to implant deciduous tooth pulp into the canal of young permanent teeth with necrotic pulps and apical periodontitis for the regenerative endodontic treatment of tooth no: 41 in a 7-year-old male. Briefly, 1.5% Sodium Hypochlorite (NaOCl) irrigation and calcium hydroxide-iodoform paste were used as root canal disinfectant at the first visit. After 2 weeks, the intracanal medication was removed, and the root canal was slowly rinsed with 17% Ethylene Diamine Tetraacetic Acid (EDTA), followed by flushing with 20 mL saline and then drying with paper points. Tooth no: 72 was extracted, and its pulp was extracted and subsequently implanted into the disinfected root canal along with induced apical bleeding. Calcium hydroxide iodoform paste was gently placed over the bleeding clot, and after forming a mineral trioxide aggregate (MTA) coronal barrier, the accessed cavities were restored using Z350 resin composite. The root developments were evaluated via radiographic imaging at 6 months, 1 year and 5 years after treatment. Imaging and clinical analysis showed closure of the apical foramen, thickening of the root canal wall, and satisfactory root length growth. Autologous transplantation might be useful to regenerate dental pulp in necrotic young permanent teeth.

Assessment of sealing efficacy, radiopacity, and surface topography of a bioinspired polymer for perforation repair.

Background: Root perforation repair presents a significant challenge in dentistry due to inherent limitations of existing materials. This study explored the potential of a novel polydopamine-based composite as a root repair material by evaluating its sealing efficacy, radiopacity, and surface topography. Methods: Confocal microscopy assessed sealing ability, comparing the polydopamine-based composite to the gold standard, mineral trioxide aggregate (MTA). Radiopacity was evaluated using the aluminium step wedge technique conforming to ISO standards. Surface roughness analysis utilized atomic force microscopy (AFM), while field emission scanning electron microscopy (FESEM) visualized morphology. Results: The polydopamine-based composite exhibited significantly superior sealing efficacy compared to MTA (P < 0.001). Radiopacity reached 3 mm aluminium equivalent, exceeding minimum clinical requirements. AFM analysis revealed a smooth surface topography, and FESEM confirmed successful composite synthesis. Conclusion: This study demonstrates promising properties of the polydopamine-based composite for root perforation repair, including superior sealing efficacy, clinically relevant radiopacity, and smooth surface topography. Further investigation is warranted to assess its clinical viability and potential translation to endodontic practice.

The Effect of Adding Various Antibiotics on the Push-out Bond Strength of a Resin-based Sealer: An In Vitro Study.

AIM: This study aimed to compare the bond strength of AH Plus sealer to root canal dentin when used with or without various antibiotics including amoxicillin, clindamycin, and triple antibiotic mixture (TAM). MATERIALS AND METHODS: A total of 80 single-rooted extracted human teeth were instrumented and obturated with gutta-percha and four different sealer-antibiotic combinations (n = 20). Group I: AH Plus without any antibiotics, Group II: AH Plus with amoxicillin, Group III: AH Plus with clindamycin, and Group IV: AH Plus with TAM. After seven days, the roots were sectioned perpendicular to their long axis and 1 mm thick slices were obtained from the midroots. The specimens were subjected to a push-out bond strength test and failure modes were also evaluated. Data was analyzed using Kruskal-Wallis and Dunn's post hoc tests. RESULTS: Group IV had significantly higher bond strength compared to other groups (p ≤ 0.05). No significant differences were found between other groups. While the sealer-antibiotic groups predominantly showed cohesive failure modes, the control group displayed both cohesive and mixed failure modes. CONCLUSION: Within the limitations of this study, the addition of TAM increased the push-out bond strength of AH Plus. CLINICAL SIGNIFICANCE: Amoxicillin, clindamycin, or TAM can be added to AH Plus for increased antibacterial efficacy without concern about their effects on the bond strength of the sealer. How to cite this article: Adl A, Shojaei NS, Ranjbar N. The Effect of Adding Various Antibiotics on the Push-out Bond Strength of a Resin-based Sealer: An In Vitro Study. J Contemp Dent Pract 2024;25(3):231-235.

Volumetric Analysis of Hand and Rotary Instrumentation, Root Canal Filling Techniques, and Obturation Materials in Primary Teeth Using Spiral CT.

AIM AND BACKGROUND: To compare the root canal volume in primary teeth using hand and rotary instruments and to evaluate root canal filling techniques and flow of root canal obturation materials in the postinstrumented root canal volume using spiral computed tomography (SCT). MATERIALS AND METHODS: Freshly extracted 16 primary molars were randomly divided into two groups and subjected to SCT analysis before and after instrumentation. For the manual technique (group I) with eight teeth were prepared using K files, and rotary (group II) eight teeth preparation was performed with ProTaper files. The filled volume in each canal was measured using SCT, and the percentage of obturated volume was calculated. The data were statistically analyzed using the Mann-Whitney U test. RESULTS: There was a statistically significant difference in both groups' volume of root canals enlarged. Even though both K files and the ProTaper system brought about enlarged canals after instrumentation, there was a statistically significant increase in volume after using K files in two canals. In three canals, there was a statistically significant increase in volume after using ProTaper. Irrespective of the obturation technique and materials used, there is no statistically significant difference in the volume after obturation. CONCLUSION: From the results of this study, the ProTaper file system shows suitable volumetric enlargement up to an optimum level, which is needed in primary root canal walls, and is better in canal shaping, as evidenced by good postobturation volume. CLINICAL SIGNIFICANCE: The traditional method of cleaning and shaping the root canals in permanent teeth using manual stainless-steel files can lead to undesirable curvatures in root canal morphology, making correctly filling the root canals difficult. It is also time-consuming and sometimes leads to iatrogenic errors. Rotary nickel-titanium (Ni-Ti) instrumentation techniques have been developed to overcome these problems. How to cite this article: Yadav DBUC, Varma RB, Kumar JS, et al. Volumetric Analysis of Hand and Rotary Instrumentation, Root Canal Filling Techniques, and Obturation Materials in Primary Teeth Using Spiral CT. J Contemp Dent Pract 2024;25(3):250-259.

Evaluation of calcium hydroxide root canal filling materials by cone beam computed tomography and three-dimensional modeling.

AIM: The aim of this study was to compare the effectiveness of filling pastes in resin prototype primary molars by cone beam computed tomography (CBCT) and 3D modeling.

Performance of obturation techniques in anatomical irregularities located at different thirds of the root canal system.

This study aimed to compare the quality of root canal obturation (ratio of area occupied by gutta-percha (G), sealer (S), and presence of voids (V)) in different anatomical irregularities (intercanal communications, lateral irregularities, and accessory canals) located at different thirds of the root canal system of mandibular molar replicas. Sixty-seven 3D printed replicas of an accessed mandibular molar were prepared using ProGlider and ProTaper Gold rotatory systems. Three specimens were randomly selected to be used as controls and did not receive further treatment. The rest were randomly distributed in 4 experimental groups to be obturated using either cold lateral compaction (LC), continuous wave of condensation (CW), and core-carrier obturation (ThermafilPlus (TH) or GuttaCore (GC)) (n=16 per group). AHPlus® sealer was used in all groups. The three controls and a specimen from each experimental group were scanned using micro-computed tomography. The rest of the replicas were sectioned at the sites of anatomical irregularities and examined at 30× magnification. The G, S, and V ratios were calculated dividing the area occupied with each element by the total root canal area and then compared among groups using the Kruskal-Wallis test. Voids were present in all obturation techniques with ratios from 0.01 to 0.15. CW obtained a significantly higher G ratio in the irregularity located in the coronal third (0.882) than LC (0.681), TH (0.773), and GC (0.801) (p<0.05). TH and GC achieved significantly higher G ratios in those located in the apical third (p<0.05). The worst quality of obturation was observed in the loop accessory canal with all obturation techniques. Whitin the limitations of this study, it can be concluded that CW and core-carrier obturation are respectively the most effective techniques for obturating anatomical irregularities located in the coronal and the apical third.

Assessment of Drying Protocol on the Bond Strength and Tag Penetration of Two Different Sealers to the Root Dentin: An In Vitro Study.

Accomplishment of an ideal root canal treatment is attributed to various essential factors such as proper instrumentation, chemomechanical preparation, obturation and post endodontic restoration. The main aim of this study is to test the null hypothesis that is the moisture condition of root dentin would not affect the bond strength and sealer penetration. This is an in vitro study conducted in Department of Conservative Dentistry and Endodontics, M A Rangoonwala Dental College, Pune, India over a period of two years (from 2021 to 2023). One hundred and twenty single-rooted Premolars with fully formed apices and similar root morphology were obtained and stored in 0.1% thymol solution. The specimens were randomly assigned to 3 broad experimental groups (n=40) according to the drying protocol such as Group A- Paper points (P), Group B- diode laser (L) and Group C- isopropyl alcohol (A). For each drying protocol, the specimens were further assigned to 2 subgroups (n=20) with respect to the sealers used: AH Plus (AH) and Apexit Plus sealers (APx). The effect of drying protocol using paper points, isopropyl alcohol and diode-lasers on the bond strength and tag penetration of two different sealers to the root dentin was evaluated. Maximum overall push-out Bond strength was seen in group AH+L and least in group APx+ L. Inter-site push-out bond Strength was highest in the coronal third followed by the middle and least in the apical third of all the groups. Maximum over all depth of penetration was seen in group AH+L and minimum in group APx+L. AH plus sealer showed better bond strength, sealer penetration and adaptation to the dentinal walls compared to Apexit plus sealer, irrespective of the drying protocol followed. All the drying protocols used did not show statistically significant results in the apical thirds of root canals of all the groups.

Comparative evaluation of resin-based sealers and bioceramic sealers for postoperative pain after endodontic treatment: A systematic review.

The systematic review aimed to compare and evaluate the effect of resin-based sealers and bioceramic sealers on postoperative pain after endodontic treatment. Two reviewers independently conducted electronic search in PubMed, the Web of Science, ScienceDirect, the Wiley Online Library, SpringerLink, Google Scholar, and the Cochrane Library, employing a complete dual-review process to ensure the inclusion of all relevant studies in the review. The search was carried out until November 2021. After selecting eligible studies, the risk of bias assessment was carried out using the revised Cochrane risk-ofbias tool for randomized trials (RoB 2). A total of 1,931 studies were identified from the electronic search, and finally 10 studies were included after full-text assessment. In all our included studies, the visual analog scale (VAS) was used for recording pain scores. Most of the studies recorded pain intensity starting from 6 h to 7 days. The results showed that there was no significant difference between resin-based sealers and bioceramic sealers in terms of incidence or intensity of postoperative pain at any point in time.

Micro-computed tomographic evaluation on the quality of single-cone obturation using a modified passive-deflation sealer injection needle: an in vitro study.

OBJECTIVES: This study aimed to design a modified passive-deflation sealer injection needle and investigate its ability to improve obturation quality of single-cone technique through assessing the distribution of voids in root canals using micro-computed tomography (micro-CT). MATERIALS AND METHODS: Forty-eight mandibular incisors were divided into eight groups (n = 6), according to the taper of root canal preparation (0.06 or 0.04), the needle used for sealer injection (modified or commercial iRoot SP injection needle), and the obturation method (iRoot SP sealer-only or single-cone obturation). After obturation, each specimen was scanned by micro-CT. The volumetric percentage and distribution of all voids were first analyzed and compared among groups, then the open and closed voids were separately analyzed and compared among single-cone obturation groups. RESULTS: Compared to commercial needle groups, modified needle groups showed much less voids, especially in the apical root canal part (P < 0.05). Besides, the modified needle groups produced much less open voids than commercial needle groups despite the root canal taper (P < 0.05). CONCLUSIONS: The modified passive deflation sealer injection needle could effectively improve the quality of single-cone obturation through reducing intra-canal voids, especially open voids throughout the root canal, thus might possibly be developed as an effective intra-canal sealer delivering instrument.

Effect of pH on the solubility and volumetric change of ready-to-use Bio-C Repair bioceramic material.

Acidic pH can modify the properties of repair cements. In this study, volumetric change and solubility of the ready-to-use bioceramic repair cement Bio-C Repair (BCR, Angelus, Londrina, PR, Brazil) were evaluated after immersion in phosphate-buffered saline (PBS) (pH 7.0) or butyric acid (pH 4.5). Solubility was determined by the difference in initial and final mass using polyethylene tubes measuring 4 mm high and 6.70 mm in internal diameter that were filled with BCR and immersed in 7.5 mL of PBS or butyric acid for 7 days. The volumetric change was established by using bovine dentin tubes measuring 4 mm long with an internal diameter of 1.5 mm. The dentin tubes were filled with BCR at 37°C for 24 hours. Scanning was performed with micro-computed tomography (micro-CT; SkyScan 1176, Bruker, Kontich, Belgium) with a voxel size of 8.74 µm. Then, the specimens were immersed in 1.5 mL of PBS or butyric acid at and 37 °C for 7 days. After this period, a new micro-CT scan was performed. Bio-C Repair showed greater mass loss after immersion in butyric acid when compared with immersion in PBS (p<0.05). Bio-C Repair showed volumetric loss after immersion in butyric acid and increase in volume after immersion in PBS (p<0.05). The acidic pH influenced the solubility and dimensional stability of the Bio-C Repair bioceramic cement, promoting a higher percentage of solubility and decrease in volumetric values.

Assessment of dental students' knowledge and performance of master gutta-percha cone selection and fitting during root canal treatment: a pilot study.

BACKGROUND: Misconceptions should be detected early in dental students' training to improve their clinical performance. Accordingly, this study aimed to assess undergraduate dental students' knowledge and performance of master gutta-percha (GP) cone selection and fitting during clinical endodontic courses at the College of Dentistry, King Saud University. METHODS: Ninety-nine undergraduate dental students completed an online survey about their knowledge of master GP cone selection. Forty-five of these students were observed by faculty members in clinical endodontic courses while they fitted master GP cones during root canal treatments. The observers recorded the details of each student's cone-fitting techniques. The data were analysed using t-tests, one-way analysis of variance, and chi-square tests (p < 0.05). Inter- and intra-observer reliability were tested using Fliess' Kappa. RESULTS SURVEY: All participants had good knowledge of over-extended cone management, while 80.8% knew how to properly manage a short cone. The proper flaring assessment method was selected by 86.9% of the female and 34.2% of the male students, and this difference was statistically significant (p = 0.0001). OBSERVATION: The students labelled the working length on the master GP cone with an indentation in 64.4% of the cases and by bending the cone 35.6% of the time. Of all students, 84.4% encountered an apical stop, and this rate correlated significantly with the length of the cone on the master apical cone radiograph (p = 0.001). Improper shaping of the canal was the most common cause of ill-fitting cones (83.3%), while 16.7% of the students chose the wrong cone size. The final obturation length was adequate in 80% of the cases; 57.8% of the students were helped by instructors. CONCLUSIONS: Most students had the basic knowledge required to solve problems related to the selection of master GP cones. However, in the clinical setting, more than half of the students required the assistance of an instructor to adjust their cone's fit. The presence of an apical stop had the most significant effect on the length of the fitted master GP cone on radiography. The most common cause of ill-fitting master cones was improper shaping of the canal.

Epoxy resin-based root canal sealers: An integrative literature review.

The correct obturation of the root canal system achieved by means of a core and a cement is essential for the success of endodontic treatment. There are several root canal cements (RCCs) on the market; however, because of their excellent characteristics, epoxy resin-based sealers (ERBSs) have been widely used. The main aim of this review was to analyze and integrate the available information on different ERBSs. An electronic search was performed in the PubMed and Scopus databases, using "epoxy resin" AND "root canal treatment", and "epoxy resin" AND "endodontics" as search terms. In general, ERBSs have good flow properties, film thickness, solubility, dimensional stability, sealing capacity, and radiopacity. They are also able to adhere to dentin while exhibiting low toxicity and some antibacterial effects. However, their main disadvantage is the lack of bioactivity and biomineralization capability. A large number of ERBSs are available on the market, and AH Plus keeps being the gold standard RCC. Yet, information on many of them is limited or non-existent, which could be due to the fact that some of them are relatively new. The latter emphasizes the need for relevant research on the physicochemical and biological properties of some ERBSs, with the aim of supporting their clinical use with sufficient evidence via prospective and long-term studies.

Effects of Novel Nanoparticulate Bioceramic Endodontic Material on Human Dental Pulp Stem Cells In Vitro.

OBJECTIVES: This study aimed to investigate the in vitro effects of root canal filling and repair paste (nRoot BP) on human dental pulp stem cells (hDPSCs). METHODS: The effects of nRoot BP and iRoot BP Plus on the adhesion, proliferation, migration, and differentiation of hDPSCs were examined in vitro for 72 hours. The adhesion of cells was observed using immunofluorescence rhodamine ghost pen cyclic peptide staining and scanning electron microscopy (SEM). Cell density and changes in migration area were measured under a fluorescence inverted microscope. Fluorescent quantitative PCR was performed to detect genes related to odontogenesis and osteogenesis. RESULTS: Cells adhering to the surfaces of nRoot BP and iRoot BP Plus exhibited similar irregular polygonal morphologies, with cells extending irregular pseudopods to adhere to the materials. CCK-8 results indicated that the density of living cells for nRoot BP and iRoot BP Plus was lower than that of the blank control group at 3 and 5 days of culture. There was no significant difference in cell migration between the groups (P > .05). The migration ability of iRoot BP Plus and nRoot BP was similar to that of the control group. Both nRoot BP and iRoot BP Plus increased the expression of the RUNX2 gene, but there was no significant difference between the groups (P < .05). Furthermore, both nRoot BP and iRoot BP Plus downregulated the expression of the DSPP gene, with no significant difference between them (P > .05). CONCLUSIONS: nRoot BP exhibited a slight inhibition of hDPSC proliferation but did not affect the adhesion and migration of hDPSCs. The impact of nRoot BP on the osteogenic and odontogenic differentiation of hDPSCs was similar to that of iRoot BP Plus.

Clinical and Radiographic Failure of Nonsurgical Endodontic Treatment and Retreatment Using Single-cone Technique With Calcium Silicate-based Sealers: A Systematic Review and Meta-analysis.

INTRODUCTION: This systematic review and meta-analysis aimed to evaluate the clinical and radiographic failure of nonsurgical endodontic treatment and retreatment for mature permanent teeth with or without apical periodontitis using the single-cone (SC) obturation technique with calcium silicate-based bio-ceramic (CSBC) sealers and to compare these failure rates to other sealer materials and obturation techniques. METHODS: A comprehensive search was conducted using MEDLINE (PubMed), Embase, Cochrane Library, Scopus, Web of Science, and gray literature up to March 2023. Two reviewers assessed the eligibility of the included studies. Eligible studies were critically appraised for risk of bias and quality of evidence. Subsequently, a meta-analysis of pooled data was conducted utilizing the RevMan software (P < .05) to evaluate the failure rate of non-surgical root canal therapy using CSBC sealers and SC obturation procedures. Separately, another analysis was conducted to compare those results with the outcome of nonsurgical root canal therapy using alternative obturation materials and methods. RESULTS: Five studies were included. The pooled failure rate for nonsurgical endodontic treatment and retreatment combined using CSBC sealers and SC obturation technique was 6.8% [95% confidence interval (CI) = (3%-12%), I2 = 46%]. A second analysis was conducted on the 3 included clinical trials to compare the outcomes of the intervention (CSBC sealers and SC obturation technique) and control groups (other sealers and other obturation techniques). This analysis found no significant difference between the 2 groups regarding clinical and radiographic failure of endodontic treatment and retreatment [Risk ratio = 0.71, 95% CI = (0.33, 1.51), I2 = 0]. This difference was also not statistically significant when the failure rate of primary root canal treatment and retreatment were separately analyzed [Combined Risk ratio of primary root canal treatment = 0.94, 95% CI = (0.46, 1.93), I2 = 0%; Combined Risk ratio of retreatment = 0.21, 95% CI = (0.001, 75.46), I2 = 0%]. CONCLUSIONS: The overall results of this systematic review and meta-analysis demonstrate that the SC obturation technique with CSBC sealer provides similar results compared to other obturation materials and techniques in facilitating the healing of apical periodontitis.

Expert consensus on difficulty assessment of endodontic therapy.

Endodontic diseases are a kind of chronic infectious oral disease. Common endodontic treatment concepts are based on the removal of inflamed or necrotic pulp tissue and the replacement by gutta-percha. However, it is very essential for endodontic treatment to debride the root canal system and prevent the root canal system from bacterial reinfection after root canal therapy (RCT). Recent research, encompassing bacterial etiology and advanced imaging techniques, contributes to our understanding of the root canal system's anatomy intricacies and the technique sensitivity of RCT. Success in RCT hinges on factors like patients, infection severity, root canal anatomy, and treatment techniques. Therefore, improving disease management is a key issue to combat endodontic diseases and cure periapical lesions. The clinical difficulty assessment system of RCT is established based on patient conditions, tooth conditions, root canal configuration, and root canal needing retreatment, and emphasizes pre-treatment risk assessment for optimal outcomes. The findings suggest that the presence of risk factors may correlate with the challenge of achieving the high standard required for RCT. These insights contribute not only to improve education but also aid practitioners in treatment planning and referral decision-making within the field of endodontics.

Efficacy of pulpotomy in managing irreversible pulpitis in mature permanent teeth: A systematic review and meta-analysis.

OBJECTIVES: This paper evaluated the success rates of pulpotomy, compared its efficacy with non-surgical root canal treatment (NSRCT), evaluated different pulpotomy techniques, and analyzed the effectiveness of contemporary bioactive materials in managing irreversible pulpitis in mature permanent teeth. DATA SOURCES: A comprehensive literature search was conducted across multiple databases including PubMed, Web of Science, Scopus, and the Cochrane Library. Search was conducted from the inception of each database to the present, adhering to PRISMA 2020 guidelines. STUDY SELECTION: Studies were selected through a multi-step screening process, focusing on adult populations, randomized controlled trials, and single-arm trials. DATA: Fifteen randomized controlled trials and eight single-arm trials were included. For a follow-up period of more than 24 months, pooled clinical success rate of pulpotomy was 92.9 % (95 %CI;82.1-99.0 %), whereas pooled radiographic success rate was 78.5 % (95 %CI;66.7-88.4 %). Meta-analyses showed that there was no significant difference in success rates between pulpotomy and NSRCT, between full and partial pulpotomy techniques, or between Mineral Trioxide Aggregate pulpotomy and Calcium Enriched Mixture pulpotomy. The results indicated comparable efficacy across these variables. CONCLUSIONS: The study highlights the potential of less invasive treatments. Pulpotomy may be a viable alternative to NSRCT for managing irreversible pulpitis in mature permanent teeth. Limitations such as the low quality of some single-arm trials and the high risk of bias in some randomized controlled trials highlight the need for further research to standardize methodologies and broaden literature inclusion for a more comprehensive understanding of the efficacy of pulpotomy, considering the high success rates reported. Clinical Significance This quantitative systematic review recognizes the potential of full or partial pulpotomy as a viable treatment alternative to root canal therapy for managing irreversible pulpitis in mature permanent teeth. Future studies should aim for standardized protocols to validate these findings and improve patient treatment outcomes.

Comparative Analysis of AH Plus Bond Strength to Root Canal Dentin and Adhesive Interface Quality after Calcium Hydroxide Removal using Different Irrigation Protocols.

INTRODUCTION: To evaluate the push-out bond strength (POBS) of AH Plus sealer to root dentin and the adhesive interface quality after calcium hydroxide (Ca(OH)2) intracanal dressing removal with different final irrigation protocols. METHOD: After root canal instrumentation and irrigation, 40 root canals were filled with Ca(OH)2 and sealed. After 14 days, the specimens were randomly distributed according to the irrigation protocols for Ca(OH)2 removal (n = 10): GH2O (control) - distilled water; GNaOCl - 1% NaOCl; GEDTA - 17% EDTA; GEDTA + NaOCl - 17% EDTA + 1% NaOCl. The root canals were filled with AH Plus sealer and gutta-percha. After 7 days, the roots were sectioned into dentin slices and submitted to POBS test and analysis of the adhesive interface under scanning electron microscope. The POBS data were statistically evaluated (analysis of variance and Tukey test). The Kruskal-Wallis and Mann-Whitney tests were used to analyze the adhesive interface (α = 0.05). RESULTS: GH2O, GNaOCl, and GEDTA + NaOCl had similar POBS values, with higher values on the apical third, in comparison with other thirds (P < .05). A homogeneous and free-of-gaps adhesive interface was observed for GH2O, GNaOCl, and GEDTA + NaOCl, with difference between GH2O and GEDTA (P < .05). GH2O and GEDTA + NaOCl presented higher sealer tags formation (P < .05). CONCLUSION: The final rinse with EDTA for Ca(OH)2 dressing removal had a negative effect on the POBS of the filling material to root dentin. The use of EDTA followed by NaOCl had results similar to the distilled water, providing uniform and free-of-gaps adhesive interface, and a higher number of sealer tags.