Solution Behavior of Glyco-Copoly(l-Glutamic Acid)s in Dilute Saline Solution.

A small series of copoly(α,l-glutamic acid/dl-allylglycine)s with the same chain length and allylglycine content (∼10 mol %) but different spatial distribution of allylglycine units was synthesized and subsequently glycosylated via thiol-ene chemistry. Dilute aqueous copolypeptide solutions (0.1 wt %, physiological saline) were analyzed by circular dichroism spectroscopy, dynamic light scattering, and cryogenic transmission electron microscopy. The copolypeptides adopted a random coil or α-helix conformation, depending on solution pH, and the glycosylated residues either distorted or enhanced the folding into an α-helix depending on their location and spatial distribution along the chain. However, regardless of their secondary structure and degree of charging, all partially glycosylated copolypeptides self-assembled into 3D spherical structures, supposedly driven by a hydrophilic effect promoting microphase separation into glucose-rich and glutamate-rich domains.

Evaluation of the effect of enriched hydrogen saline solution on distant organ (lung) damage in skeletal muscle ischemia reperfusion in rats.

INTRODUCTION: Ischemia-reperfusion (IR) injury is a major concern that frequently occurs during vascular surgeries. Hydrogen-rich saline (HRS) solution exhibits antioxidant and anti-inflammatory properties. This study aimed to examine the effects of HRS applied before ischemia in the lungs of rats using a lower extremity IR model. MATERIAL AND METHODS: After approval was obtained from the ethics committee, 18 male Wistar albino rats weighing 250-280 g were randomly divided into three groups: control (C), IR and IR-HRS. In the IR and IR-HRS groups, an atraumatic microvascular clamp was used to clamp the infrarenal abdominal aorta, and skeletal muscle ischemia was induced. After 120 min, the clamp was removed, and reperfusion was achieved for 120 min. In the IR-HRS group, HRS was administered intraperitoneally 30 min before the procedure. Lung tissue samples were examined under a light microscope and stained with hematoxylin-eosin (H&E). Malondialdehyde (MDA) levels, total sulfhydryl (SH) levels, and histopathological parameters were evaluated in the tissue samples. RESULTS: MDA and total SH levels were significantly higher in the IR group than in the control group (p < 0.0001 and p = 0.001, respectively). MDA and total SH levels were significantly lower in the IR-HRS group than in the IR group (p < 0.0001 and p = 0.013, respectively). A histopathological examination revealed that neutrophil infiltration/aggregation, alveolar wall thickness, and total lung injury score were significantly higher in the IR group than in the control group (p < 0.0001, p = 0.001, and p < 0.0001, respectively). Similarly, alveolar wall thickness and total lung injury scores were significantly higher in the IR-HRS group than in the control group (p = 0.009 and p = 0.004, respectively). A statistically significant decrease was observed in neutrophil infiltration/aggregation and total lung injury scores in the IR-HRS group compared to those in the IR group (p = 0.023 and p = 0.022, respectively). CONCLUSION: HRS at a dose of 20 mg/kg, administered intraperitoneally 30 min before ischemia in rats, reduced lipid peroxidation and oxidative stress, while also reducing IR damage in lung histopathology. We believe that HRS administered to rats prior to IR exerts a lung-protective effect.

Assessment of change in the basic variants composition of trastuzumab during dilution in saline for administration.

Postproduction handling of drug products during preparation or clinical use may affect the structure and efficacy of the drug and perhaps remain unnoticed. Since chemical modifications can impact the product's structure, stability, and biological activity, this study investigates the impact of elevated temperature and subtle shift in pH on the drug product post-dilution in saline. The mAb sample diluted in saline for administration was stressed at elevated temperature and slightly acidic pH condition. Extended stability studies were performed and monitored for size and charge heterogeneity. Size heterogeneity shows no significant changes, whereas charge heterogeneity shows an increase in basic variants and a reduction in main species. Further, basic variants were isolated and characterized to identify the type and site of chemical modification. Intact mass analysis and peptide mapping identify that the basic variants were attributed mainly to the isomerization of HC Asp102 into iso-Asp or its succinimide intermediate. Four basic variants were found to exhibit similar structural properties as the main and control samples. However, basic variants showed reduced binding affinity to HER2 receptor, while there was no significant difference in FcRn binding. The results indicate that modification in the HC Asp102, which is present in the CDR, affects antigen binding and thus can influence the potency of the drug product. Hence, with the conventional stability studies required to license the drug product, including in-use or extended stability studies to mimic the postproduction handling would be desirable.

Local Treatment of Hydrogen-Rich Saline Promotes Wound Healing In Vivo by Inhibiting Oxidative Stress via Nrf-2/HO-1 Pathway.

Wound healing is a complex dynamic process involving a large number of biological events. Excessive oxidative stress is a key factor delaying wound healing. Hydrogen is an antioxidant, anti-inflammatory, and antiapoptotic medical gas with safety, effectiveness, and penetrability. However, the effects of local treatment of hydrogen on wound healing and its potential mechanisms remain unclear. In this study, Kunming (KM) mice were used to set up a wound model. All the mice were randomly divided into the control, the local treatment with saline group, the local treatment with the hydrogen-rich saline group, and the intraperitoneal injection of the hydrogen-rich saline group. To evaluate the impact of hydrogen-rich saline on wound healing, we assessed the wound healing rate, wound closure time, histomorphology, oxidative stress indicators, inflammatory cytokines, the apoptosis index, and the expression of the nuclear factor-erythroid-related factor 2(Nrf-2). Furthermore, the immortalized nontumorigenic human epidermal (HaCaT) cells were chosen to investigate the therapeutic effects of hydrogen-rich medium on oxidative stress and its underlying mechanisms. The results showed that local treatment of hydrogen-rich saline shortened wound closure time and reduced the level of proinflammatory cytokines and lipid peroxidation. Meanwhile, it decreased the cell apoptosis index and increased the Nrf-2 expression. Besides, hydrogen-rich medium relieved the oxidative stress via the activation of the Nrf-2/heme oxygenase-1 (HO-1) pathway. In conclusion, local treatment of hydrogen-rich saline exhibits the healing-promoting function through antioxidant, anti-inflammatory, and antiapoptotic effects. Hydrogen relieves the oxidative stress in the wound microenvironment via Nrf-2/HO-1 signaling pathway. This study may offer a new strategy to promote wound healing and a new perspective to illustrate the mechanism of wound healing.

Efficacy and safety of a thermosensitive hydrogel for endoscopic submucosal dissection: An in vivo swine study.

Injectable thermo-sensitive chitosan hydrogels have recently been developed for the use of submucosal fluids in endoscopic submucosal dissections (ESD). This study aimed to investigate the efficacy and safety of chitosan hydrogels during ESD. Submucosal fluids were administered as follows: 0.9% normal saline (NS), 0.4% hyaluronic acid (HA) and chitosan/ß-glycerophosphate (CS/GP) hydrogel. Each solution was administered twice into the stomach and colon of a pig, with a total of 72 ESD procedures performed on 12 pigs. The injected volume and procedure-related parameters were recorded and analyzed. ESDs that created ulcers after 7 days were histologically compared. All ESD specimens were resected en bloc. The total injected volumes during ESD of the stomach (NS, 16.09±3.27 vs. HA, 11.17±2.32 vs. CS/GP, 9.44±2.33; p<0.001) and colon (NS, 9.17±1.80 vs. HA, 6.67±1.50 vs. CS/GP, 6.75±1.57; p = 0.001) were significantly different. Hydrogel showed significant differences from normal saline in terms of fluid power (mm2/vol; NS, 35.70±9.00 vs. CS/GP 57.48±20.77; p = 0.001) and consumption rate (vol/min; NS, 2.59±0.86 vs. CS/GP, 1.62±0.65; p = 0.013) in the stomach. Histological examination revealed preserved muscularis propria, although the chitosan hydrogel resulted in a partial inflammatory response, with a hypertrophied submucosal layer. Chitosan hydrogel was found to be superior to normal saline, with an efficacy similar to that of hyaluronic acid. Nonetheless, long-term histological changes should be evaluated before clinical implementation.

Aluminium release and fluid warming: provocational setting and devices at risk.

BACKGROUND: Fluid warming, recommended for fluid rates of > 500 ml h-1, is an integral part of patient temperature management strategies. Fluid warming devices using an uncoated aluminium containing heating element have been reported to liberate aluminium resulting in critical aluminium concentrations in heated fluids. We investigated saline solution (0.9%), artificially spiked with organic acids to determine the influence of fluid composition on aluminium release using the uncoated enFlow® device. Additionally, the Level1® as a high volume fluid warming device and the ThermoSens® device were investigated with artificial spiked fluid at high risk for aluminum release and a clinically used crystalloid solution. RESULTS: Saline solution spiked with lactate more than acetate, especially at a non neutral pH, led to high aluminium release. Next to the enFlow® device, aluminium release was observed for the Level1® device, but not for the coated ThermoSens®-device. CONCLUSION: Uncoated aluminium containing fluid warming devices lead to potentially toxic levels of aluminium in heated fluids, especially in fluids with non-neutral pH containing organic acids and their salts like balanced electrolyte solutions.

Enhanced skin adhesive property of α-cyclodextrin/nonanyl group-modified poly(vinyl alcohol) inclusion complex film.

For skin contact medical devices, realizing a strong contact with skin is essential to precisely detect human biological information and enable human-machine interaction. In this study, we aimed to fabricate and characterize an inclusion complex film (ICF) for skin adhesion using α-cyclodextrin (α-CD) and nonanyl group-modified PVA (C9-PVA) under wet conditions. Based on the water insolubility of C9-PVA and the inclusion ability of α-CD for alkyl groups, α-CD/C9-PVA ICF was prepared. Among the prepared ICFs, α-CD/2.5C9-PVA (w/w = 0.5) ICF showed the highest bonding strength and T-peeling strength to porcine skin. Furthermore, α-CD/2.5C9-PVA (w/w = 0.5) ICF had better water vapor transmission rate than that of commercial tapes. In addition, the ion permeability test revealed that α-CD/2.5C9-PVA (w/w = 0.5) ICF exhibited excellent Na and Cl ion permeability. These results demonstrated that the multi-functional α-CD/2.5C9-PVA (w/w = 0.5) ICF can be a promising adhesive for skin contact medical devices.

The effect of saline versus air for cuff inflation on the incidence of high intra-cuff pressure in paediatric MicroCuff® tracheal tubes: a randomised controlled trial.

The use of cuffed tracheal tubes in paediatric anaesthesia is now common. The use of nitrous oxide in anaesthesia risks excessive tracheal tube cuff pressures, as nitrous oxide can diffuse into the cuff during the course of surgery. The aim of this single-centre, prospective, randomised controlled trial was to compare the effect of saline versus air for the inflation of tracheal tube cuffs on the incidence of excessive intra-operative cuff pressure in children undergoing balanced anaesthesia with nitrous oxide. Children (age ≤ 16 y) were randomly allocated to receive either saline (saline group) or air (air group) to inflate the cuff of their tracheal tube. The pressure in the tracheal tube cuff was measured during surgery and brought down to the initial inflation level if it breached a safe limit (25 cmH2 O). Post-extubation adverse respiratory events were noted. Data from 48 patients (24 in each group), aged 4 months to 16 y, were analysed. The requirement for reduction in intra-cuff pressure occurred in 1/24 patients in the saline group, compared with 16/24 patients in the air group (p < 0.001). The incidence of extubation-related adverse events was similar in the saline and air groups (15/24 vs. 13/24, respectively; p = 0.770). The use of saline to inflate the cuff of paediatric cuffed tubes reduces the incidence of high intra-cuff pressures during anaesthesia. This may provide a pragmatic extra safety barrier to help reduce the incidence of excessive tracheal cuff pressure when nitrous oxide is used during paediatric anaesthesia.

Study of the physicochemical properties of drugs suitable for administration using a lymphatic drug delivery system.

Lymph node (LN) metastasis is thought to account for 20-30% of deaths from head and neck cancer. The lymphatic drug delivery system (LDDS) is a new technology that enables the injection of drugs into a sentinel LN (SLN) during the early stage of tumor metastasis to treat the SLN and secondary metastatic LNs. However, the optimal physicochemical properties of the solvent used to carry the drug have not been determined. Here, we show that the osmotic pressure and viscosity of the solvent influenced the antitumor effect of cisplatin (CDDP) in a mouse model of LN metastasis. Tumor cells were inoculated into the proper axillary LN (PALN), and the LDDS was used to inject CDDP solution into the subiliac LN (SiLN) to treat the tumor cells in the downstream PALN. CDDP dissolved in saline had no therapeutic effects in the PALN after it was injected into the SiLN using the LDDS or into the tail vein (as a control). However, CDDP solution with an osmotic pressure of ~ 1,900 kPa and a viscosity of ~ 12 mPa⋅s suppressed tumor growth in the PALN after it was injected into the SiLN using the LDDS. The high osmotic pressure dilated the lymphatic vessels and sinuses to enhance drug flow in the PALN, and the high viscosity increased the retention of CDDP in the PALN. Our results demonstrate that optimizing the osmotic pressure and viscosity of the solvent can enhance the effects of CDDP, and possibly other anticancer drugs, after administration using the LDDS.

Radiofrequency ablation combined with conductive fluid-based dopants (saline normal and colloidal gold): computer modeling and ex vivo experiments.

BACKGROUND: The volume of the coagulation zones created during radiofrequency ablation (RFA) is limited by the appearance of roll-off. Doping the tissue with conductive fluids, e.g., gold nanoparticles (AuNPs) could enlarge these zones by delaying roll-off. Our goal was to characterize the electrical conductivity of a substrate doped with AuNPs in a computer modeling study and ex vivo experiments to investigate their effect on coagulation zone volumes. METHODS: The electrical conductivity of substrates doped with normal saline or AuNPs was assessed experimentally on agar phantoms. The computer models, built and solved on COMSOL Multiphysics, consisted of a cylindrical domain mimicking liver tissue and a spherical domain mimicking a doped zone with 2, 3 and 4 cm diameters. Ex vivo experiments were conducted on bovine liver fragments under three different conditions: non-doped tissue (ND Group), 2 mL of 0.9% NaCl (NaCl Group), and 2 mL of AuNPs 0.1 wt% (AuNPs Group). RESULTS: The theoretical analysis showed that adding normal saline or colloidal gold in concentrations lower than 10% only modifies the electrical conductivity of the doped substrate with practically no change in the thermal characteristics. The computer results showed a relationship between doped zone size and electrode length regarding the created coagulation zone. There was good agreement between the ex vivo and computational results in terms of transverse diameter of the coagulation zone. CONCLUSIONS: Both the computer and ex vivo experiments showed that doping with AuNPs can enlarge the coagulation zone, especially the transverse diameter and hence enhance sphericity.

An evaluation of glistening and stability of intraocular lens material manufactured by different methods.

PURPOSE: To evaluate glistening and long-term stability of five commercially available intraocular lenses. METHODS: This experimental study evaluated the SN60WF (Alcon), XY1 (Hoya), NS-60YG (NIDEK), ZCB00V (Johnson & Johnson Vision) and AN6KA (Kowa) intraocular lenses. To generate glistenings, intraocular lenses were immersed in physiological saline at 50°C for 2 h, then left in situ at 35°C and removed at regular intervals over 24 h. Stability of the intraocular lens material was assessed by immersing intraocular lenses into vials of purified water placed at 100°C for 115 days, which simulated 20-year ageing. Gas chromatography-mass spectrometry was used to detect leached compounds. RESULTS: Almost no glistenings were observed for the AN6KA. Glistenings were observed in the remaining intraocular lenses after 3 h. The number of glistenings gradually disappeared by 6 h for all intraocular lenses except SN60WF (12 h). Only the NS-60YG and ZCB00V intraocular lenses had no changes in weight or dimensions. Gas chromatography-mass spectrometry detected phenethyl alcohol in XY1 and SN60WF, 2-phenoxyethanol in AN6K and no compounds in the remaining intraocular lenses. A peak shift due to the carbonyl group between 1600 and 1700 cm-1 was detected for the SN60WF and AN6K intraocular lenses only. CONCLUSION: SN60WF had the most numerous glistenings that resolved over a longer duration. The long-term stability test confirmed elution of the intraocular lens material-derived compounds and signs of degradation for the XY1, SN60WF and AN6K intraocular lenses. NS-60YG and ZCB00V showed no signs of deterioration due to ageing. Differing manufacturing methods likely play a role in the stability of intraocular lenses.

High-Strength Hydrogel Adhesive Formed via Multiple Interactions for Persistent Adhesion under Saline.

Hydrogel adhesives have been widely used in wet environments. Nonetheless, strong and stable persistent adhesion remains a challenge. Here, we report a facile yet powerful strategy to construct high-strength hydrogel adhesives for durable adhesion in a saline environment. Such a hydrogel consists of two polymer networks: a hydrophobic-associated polyacrylamide network of covalent and noncovalent cross-links and an alginate network cross-linked by divalent cations in saline. Meanwhile, polydopamine nanoparticles formed through in-situ self-polymerization are distributed evenly throughout the system to provide underwater adhesion. A low and controllable swelling rate and high compressive strength of hydrogels can be achieved via this multiple interaction strategy. Ultimately, this strategy contributes to the persistent underwater adhesion of hydrogels, and the decreasing rate of lap-shear adhesion strength of hydrogels is only 24.79 ± 8.01% after saline immersion for up to 21 days. Moreover, good cytocompatibility of hydrogels is helpful for their application in the biomedical field.

The effect of concentration, reconstitution solution and pH on the stability of a remifentanil hydrochloride and propofol admixture for simultaneous co-infusion.

BACKGROUND: There are scenarios where pre-mixing and infusing analgesic and anaesthetic agents as a single intravenous (IV) solution is highly desirable; however, it is important to ensure the agents are compatible when mixed. As such, the long-term stability of a remifentanil-propofol mixture, and means of improving this, were assessed across a range of remifentanil concentrations, diluents, and time points. METHODS: Remifentanil was reconstituted with ultrapure water, 0.9% saline, 20% saline, or 8.4% sodium bicarbonate solution (the latter two chosen for their pH characteristics, rather than their use in pharmaceutical reconstitution) and then mixed with propofol (1%) or further diluted with water to derive concentrations of 10-50 µg mL- 1. Remifentanil and propofol concentrations were determined initially and then periodically for up to 24 h using high performance liquid chromatography (HPLC). Mass spectrometry (MS) was used to detect degradation products in solutions containing 30 µg mL- 1 of remifentanil. Statistical analysis was performed using ANOVA and Student's t-test, with a significance value of 0.05. RESULTS: Isolated remifentanil (pH < 4) and propofol (pH 7.35) did not degrade significantly when reconstituted with water or saline solution over 24 h, while remifentanil reconstituted with sodium bicarbonate degraded significantly (P < 0.001, pH 8.65). Mixing with propofol substantially increased the pH of the mixture and resulted in significant remifentanil degradation for all reconstitution solutions used, while propofol remained stable (pH 6.50). The amount of degradation product detected in samples containing isolated remifentanil and a mixture of the drugs was proportional to the remifentanil degradation observed. CONCLUSIONS: Remifentanil stability is affected by both the reconstitution solution used and when mixed with propofol, with pH appearing to be a contributing factor to degradation. If the pH of the solution and concentration of remifentanil are correctly controlled, e.g. through the use of a more acidic diluent, an admixture of remifentanil and propofol may be useful clinically.

Evaluation of Physicochemical Properties Following Syringe-to-Syringe Mixing of Hyaluronic Acid Dermal Fillers.

BACKGROUND: Historically, soft-tissue hyaluronic acid (HA) fillers have been mixed with agents to reduce pain or alter physicochemical properties. OBJECTIVE: Evaluate the impact of dilution and mixing on HA filler physicochemical properties. MATERIALS AND METHODS: Crosslinked HA filler (VYC-20L, 20 mg/mL) was diluted to 15 mg/mL using saline through 5 or 10 passes between 2 syringes connected using a luer connector. Extrusion force, rheological properties, and microscopic appearance were assessed. Undiluted VYC-15L (15 mg/mL) served as the control. RESULTS: Average extrusion force was higher for diluted VYC-20L versus the control, with an increase in slope for gel diluted using 5 passes (0.65) and 10 passes (0.52) versus the control (<0.1). For diluted samples mixed with 5 or 10 passes, the rheological profile was different between the 2 halves of the syringe, with the second half more elastic than the first half, compared with the consistent profile of undiluted samples. Microscopically, diluted VYC-20L samples seemed more liquid near the luer and more particulate near the piston compared with the control, which was smooth throughout. CONCLUSION: In addition to potentially introducing contamination, diluting or mixing soft-tissue HA fillers yields a heterogeneous product with physicochemical characteristics that vary substantially throughout the syringe.

Specific and non-specific interactions between metal cations and zwitterionic alanine tripeptide in saline solutions reported by the symmetric carboxylate stretching and amide-II vibrations.

The "specific" interaction between metal cations (Na+, Ca2+, Mg2+, and Zn2+) and the charged COO- group, and the "non-specific" interaction between these cations and the peptide backbone of a zwitterionic trialanine (Ala3) in aqueous solutions were examined in detail, using linear infrared (IR) absorptions of the COO- symmetric stretching and the amide-II (mainly the C-N stretching) modes as IR probes. Different IR spectral changes in peak positions and intensities of the two IR probes clearly demonstrate their sensitivities to nearby cation distributions in distance and population. Quantum chemistry calculations and molecular dynamics simulations were used to describe the cation-peptide interaction picture. These combined results suggest that Na+ and Ca2+ tend to bind to the COO- group in the bidentate form, while Mg2+ and Zn2+ tend to bind to the COO- group in the pseudo-bridging form. The results also show that while all three divalent cations indirectly interact with the peptide backbone with large population, Ca2+ and Mg2+ can be sometimes distributed very close to the backbone. Such a non-specific cation interaction can be moderately sensed by the C-N stretching of the amide-II mode when cations approach the polar amide C[double bond, length as m-dash]O group, and is also influenced by the NH3+ charge group located at the N-terminus. The results suggest that the experimentally observed complication of the Hofmeister cation series shall be understood as a combined specific and non-specific cation-peptide interactions.

Factors contributing to stability and instability in alpha-amylase activity in diluted saliva samples over time.

For the measurement of salivary alpha-amylase (sAA) activity, saliva samples first have to be diluted. There is some evidence for instability, that is, a decline of sAA activity in diluted samples. It is not clear which factors during dilution may contribute to this phenomenon and how quickly this decline of sAA activity occurs. Several experiments were conducted to investigate whether and how the material of the container (polystyrene (PS), polypropylene (PP), glass; experiment 1) and the diluent (saline (NaCl) solution, phosphate buffer saline (PBS), ultra-pure water; experiment 2) may affect sAA stability in diluted samples over a broad time window of up to 5 h. To study the velocity of the phenomenon in a fine-grained temporal resolution, sAA activity during the dilution process was studied (experiment 3). The results suggest that the (in)stability of sAA activity in diluted samples is determined by the interaction of material, diluent, and time. The sAA activity was relatively stable if saliva samples were diluted with a NaCl solution or PBS in glass tubes. However, sAA activity in diluted samples decreased in plastic containers (PS, PP), or if ultra-pure water was used as the diluent. There was a clear time effect on this decline. However, the decline appears to require some time to evolve and may not occur immediately during the dilution process. To conclude, the dilution of saliva samples should preferably be conducted with NaCl solution or PBS in glass containers. If glass containers are not available, PS and PP containers can be used if the dilution is processed quickly (within 25 min) and the measurement is initiated immediately upon dilution.

Associative interactions between pullulan and negatively charged bovine serum albumin in physiological saline solutions.

In the present study, the behavior of bovine serum albumin (BSA) and pullulan (PULL) mixtures was investigated in physiological saline solution at 37 °C and pH = 7.4 (above the isoelectric point of BSA), by viscometry and membrane osmometry. The new Wolf approach was used for modeling the viscometric behavior of the PULL/BSA saline solutions. From the viscometric data, the contributions of binary, ternary and quaternary intersegmental contacts were determined. Osmotic pressure measurements were carried out as a function of PULL/BSA mixture concentration and composition. In dilute 0.15 M NaCl solutions, the electrostatic repulsion between the BSA molecules is partially screened and attractive PULL/protein interactions are mediated by Na ions. Thus, large deviations from ideal behavior were observed for BSA containing systems. This effect could be attributed to complexes formation as the protein content increases in the solution. The complexation was depicted as the adsorption protein molecules on the PULL chains through the electrolyte molecules. The results obtained by viscometry and osmometry were corroborated, allowing the prediction of the phase behavior of the mixtures. The reported experimental results provide useful information for the design of new biomaterials starting from pullulan and globular proteins.

Relationship Between Ablation Lesion Size Estimated by Ablation Index and Different Ablation Settings-an Ex Vivo Porcine Heart Study.

This study aimed to verify the reliability of ablation index (AI) for ablation lesion estimating with different settings for radiofrequency (RF) parameters: power, impedance, contact angles, irrigation rate, temperature of irrigation saline, and irrigation solution. RF ablations (N = 66) were performed on ex vivo porcine left ventricle submerged in 37 °C saline. The aforementioned ablation parameters were changed to measure whether the size of the ablation lesion was consistent at a fixed AI value of 500. The maximum lesion diameter (r = - 0.631, P = 0.028), depth (r = - 0.896, P < 0.001), and volume (r = - 0.745, P < 0.005) were significantly reduced with an increase of the impedance. The lesion depth (P < 0.05) and the lesion volume (P < 0.05) were significantly larger with glucose irrigation than saline irrigation. In conclusion, at a fixed AI value, impedance and irrigation solution have impact on the ablation lesions, which could affect the accuracy of AI formula to estimate ablation lesion size. Graphical abstract.

Detection of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) Is Comparable in Clinical Samples Preserved in Saline or Viral Transport Medium.

As the coronavirus disease 2019 (COVID-19) pandemic sweeps across the world, the availability of viral transport medium (VTM) has become severely limited, contributing to delays in diagnosis and rationing of diagnostic testing. Given that severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) viral RNA has demonstrated stability, we posited that phosphate-buffered saline (PBS) may be a viable transport medium, as an alternative to VTM, for clinical real-time quantitative PCR (qPCR) testing. The intra-individual reliability and interindividual reliability of SARS-CoV-2 qPCR were assessed in clinical endotracheal secretion samples transported in VTM or PBS to evaluate the stability of the qPCR signal for three viral targets (N gene, ORF1ab, and S gene) when samples were stored in these media at room temperature for up to 18 hours. We report that the use of PBS as a transport medium allows high intra-individual and interindividual reliability, maintains viral stability, and compares with VTM in the detection of the three SARS-CoV-2 genes through 18 hours of storage. This study establishes PBS as a clinically useful medium that can be readily deployed for transporting and short-term preservation of specimens containing SARS-CoV-2. Use of PBS as a transport medium has the potential to increase testing capacity for SARS-CoV-2, aiding more widespread screening and early diagnosis of COVID-19.

Tracking the physical stability of fluorescent-labeled mAbs under physiologic in vitro conditions in human serum and PBS.

In recent years, the stability of biotherapeutics in vivo has received increasing attention. Assessing the stability of biotherapeutics in serum may support the selection of adequate molecule candidates. In our study, we compared the physical stability of 8 different monoclonal antibodies (mAbs) in phosphate-buffered saline (PBS) and human serum. mAbs were Alexa Fluor 488-labeled and characterized with respect to fragmentation, aggregation, and proteinaceous particle formation. Samples were analyzed using size-exclusion chromatography, light obscuration, and flow imaging. In addition, novel methods such as flow cytometry and fluorescence microscopy were applied. mAbs were selected based on their hydrophobicity and isoelectric point. All mAbs studied were inherently less stable in human serum as compared to PBS. Particle size and particle counts increased in serum over time. Interestingly, certain mAbs showed significant levels of fragmentation in serum but not in PBS. We conclude that PBS cannot replicate the physical stability measured in serum. The stability of labeled mAbs in human serum did not correlate with their hydrophobicity and isoelectric point . Serum stability significantly differed amongst the tested mAbs.