NIR-Responsive Methotrexate-Modified Iron Selenide Nanorods for Synergistic Magnetic Hyperthermic, Photothermal, and Chemodynamic Therapy.

Breast cancer is a malignant tumor with a high mortality rate among women. Therefore, it is necessary to develop novel therapies to effectively treat this disease. In this study, iron selenide nanorods (FeSe2 NRs) were designed for use in magnetic hyperthermic, photothermal, and chemodynamic therapy (MHT/PTT/CDT) for breast cancer. To illustrate their efficacy, FeSe2 NRs were modified with the chemotherapeutic agent methotrexate (MTX). MTX-modified FeSe2 (FeSe2-MTX) exhibited excellent controlled drug release properties. Fe2+ released from FeSe2 NRs induced the release of •OH from H2O2 via a Fenton/Fenton-like reaction, enhancing the efficacy of CDT. Under alternating magnetic field (AMF) stimulation and 808 nm laser irradiation, FeSe2-MTX exerted potent hyperthermic and photothermal effects by suppressing tumor growth in a breast cancer nude mouse model. In addition, FeSe2 NRs can be used for magnetic resonance imaging in vivo by incorporating their superparamagnetic characteristics into a single nanomaterial. Overall, we presented a novel technique for the precise delivery of functional nanosystems to tumors that can enhance the efficacy of breast cancer treatment.

Selenium Vacancy Engineering Using Bi2Se3 Nanodots for Boosting Highly Efficient Photonic Hyperthermia.

Despite bismuth-based energy conversion nanomaterials having attracted extensive attention for nanomedicine, the nanomaterials suffer from major shortcomings including low tumor accumulation, long internal retention time, and undesirable photothermal conversion efficiency (PCE). To combat these challenges, bovine serum albumin and folic acid co-modified Bi2Se3 nanomedicine with rich selenium vacancies (abbreviated as VSe-BS) was fabricated for the second near-infrared (NIR-II) light-triggered photonic hyperthermia. More importantly, selenium vacancies on the crystal planes (0 1 5) and (0 1 11) of VSe-BS with similar formation energies could be distinctively observed via aberration-corrected scanning transmission electron microscopy images. The defect engineering endows VSe-BS with enhanced conductivity, making VSe-BS possess outstanding PCE (54.1%) in the NIR-II biowindow and desirable photoacoustic imaging performance. Tumor ablation studies indicate that VSe-BS possesses satisfactory therapeutic outcomes triggered by NIR-II light. These findings give rise to inspiration for further broadening the biological applications of defect engineering bismuth-based nanomaterials.

Hitchhiking Nanoparticles: Mesenchymal Stem Cell-Mediated Delivery of Theranostic Nanoparticles.

Nanotechnology has emerged as a promising solution to permanent elimination of cancer. However, nanoparticles themselves lack specificity to tumors. Due to enhanced migration to tumors, mesenchymal stem cells (MSCs) were suggested as cell-mediated delivery vehicles of nanoparticles. In this study, we have constructed a complex composed of photoluminescent quantum dots (QDs) and a photosensitizer chlorin e6 (Ce6) to obtain multifunctional nanoparticles, combining cancer diagnostic and therapeutic properties. QDs serve as energy donors-excited QDs transfer energy to the attached Ce6 via Förster resonance energy transfer, which in turn generates reactive oxygen species. Here, the physicochemical properties of the QD-Ce6 complex and singlet oxygen generation were measured, and the stability in protein-rich media was evaluated, showing that the complex remains the most stable in protein-free medium. In vitro studies on MSC and cancer cell response to the QD-Ce6 complex revealed the complex-loaded MSCs' potential to transport theranostic nanoparticles and induce cancer cell death. In vivo studies proved the therapeutic efficacy, as the survival of tumor-bearing mice was statistically significantly increased, while tumor progression and metastases were slowed down.

Transition-Metal Dichalcogenide Artificial Antibodies with Multivalent Polymeric Recognition Phases for Rapid Detection and Inactivation of Pathogens.

Antibodies are recognition molecules that can bind to diverse targets ranging from pathogens to small analytes with high binding affinity and specificity, making them widely employed for sensing and therapy. However, antibodies have limitations of low stability, long production time, short shelf life, and high cost. Here, we report a facile approach for the design of luminescent artificial antibodies with nonbiological polymeric recognition phases for the sensitive detection, rapid identification, and effective inactivation of pathogenic bacteria. Transition-metal dichalcogenide (TMD) nanosheets with a neutral dextran phase at the interfaces selectively recognized S. aureus, whereas the nanosheets bearing a carboxymethylated dextran phase selectively recognized E. coli O157:H7 with high binding affinity. The bacterial binding sites recognized by the artificial antibodies were thoroughly identified by experiments and molecular dynamics simulations, revealing the significance of their multivalent interactions with the bacterial membrane components for selective recognition. The luminescent WS2 artificial antibodies could rapidly detect the bacteria at a single copy from human serum without any purification and amplification. Moreover, the MoSe2 artificial antibodies selectively killed the pathogenic bacteria in the wounds of infected mice under light irradiation, leading to effective wound healing. This work demonstrates the potential of TMD artificial antibodies as an alternative to antibodies for sensing and therapy.

Albumin-Templated Bi2Se3-MnO2 Nanocomposites with Promoted Catalase-Like Activity for Enhanced Radiotherapy of Cancer.

Novel and effective radiosensitizers that can enhance radiosensitivity of tumor tissues and increase the local radiation dose are highly desirable. In this work, templated by bovine serum albumin (BSA), Bi2Se3-MnO2 nanocomposites (Bi2Se3-MnO2@BSA) were fabricated via biomineralization, while Bi2Se3 nanodots act as radiosensitizers to increase the local radiation dosage because of their strong X-ray attenuation ability, and MnO2 with catalase-like activity can increase the oxygen concentration in tumors by triggering the decomposition of tumor endogenous H2O2 so as to improve the hypoxia-associated radioresistance of tumors. Owing to the interaction of the two components in the interface, Bi2Se3-MnO2@BSA showed promoted catalytic activity compared to MnO2@BSA, favoring tumor radiotherapy (RT) sensitization. BSA templating enabled the nanocomposites with high colloidal stability and biocompatibility as well as satisfactory tumor targeting both in vitro and in vivo; thus, an enhanced RT efficacy was obtained. Moreover, the proposed Bi2Se3-MnO2@BSA exhibited excellent performances in computerized tomography and magnetic resonance imaging. Thus, this work provides a tumor microenvironment-responsive multifunctional theranostic nanoagent with an improved performance for imaging-guided tumor RT sensitization.

Stimuli-responsive azobenzene-quantum dots for multi-sensing of dithionite, hypochlorite, and azoreductase.

A new fluorescence turn-on sensing platform has been developed applicable for sensitive profiling of multiple chemical and biological analytes, using azobenzene-quantum dot as a new stimuli-responsive optical nanoprobe. An azobenzene-carrying compound bis [4, 4'-(dithiophenyl azo)-1, 3-benzenediamine] (DTPABDA) is for the first time reported to be used for conjugation with CdSe/ZnS core/shell quantum dots (QDs) via the ligand exchange reaction. Due to the photo-induced electron-transfer (PET) effect, the electron-withdrawing azobenzene groups of DTPABDA can significantly cause the photoluminescence (PL) of QDs quenched. The QDs' PL can be subsequently reignited by the removal of azo moiety cleavable through three types of specific reactions: the dithionite reduction, hypochlorite oxidation, and azoreductase enzymatic catalysis, respectively. By monitoring of reaction-induced recovery of FL signals at 560 nm with an excitation of 450 nm, such azobenzene-QDs conjugates served as a new nanoprobe enabling the fluorescence turn-on sensing of dithionite, hypochlorite, and azoreductase with high sensitivity, broad linear range, and good selectivity. The successful detection of target analytes in real samples reveals the potential of our method in practical applications, such as biosensing, environmental and industrial monitoring. Graphical abstract A new stimuli-responsive fluorescence probe is reported for the sensitive detection of sodium dithionite, hypochlorite, and azoreductase. The probe consists of QDs with an azobenzene-carrying compound as a ligand. The fluorescence of QDs could be quenched by the azo group and subsequently recovered via the removal of azo group by these three compounds, resulting in the "turn-on" sensing of these compounds with high sensitivity, broad linear range, and good selectivity. The successful detection of azoreductase in serum samples reveals the practical use of this method.

Synthesis of Se-polysaccharide mediated by selenium oxychloride: Structure features and antiproliferative activity.

Selenium oxychloride (SOC) was employed as a highly reactive selenide reagent to synthesize selenized Artemisia sphaerocephala polysaccharides (SeASP). Se content of SeASP was significantly increased (∼22,400 µg/g) as compared to HNO3/H2SeO3 selenylation method (1703 µg/g). Furthermore, selenized ASP was prepared by using microwave-assisted synthesis which obviously enhanced selenylation kinetics. FT-IR, Raman, XPS and NMR results exhibited seleno-group was substituted at C6 position in the form of selenite (Se4+). SEC-MALLS suggested SOC system could effectively avoid the degradation of polysaccharide chain. Meanwhile, MALLS calculation, MB spectrophotometric method and AFM observation showed SeASP appeared spherical and rod-shaped conformation after selenylation. Seleno-groups were more likely to affect the conformational transformation of polysaccharide chains. Moreover, SeASP could significantly enhance antiproliferative activity against three tumor cells, of which the IC50 value of HepG2 was calculated as 24.35 µg/mL. It was found that higher Se content could effectively improve the antitumor activities of Se-polysaccharides in vitro.

Enzymatic in situ generation of covalently conjugated electron acceptor of PbSe quantum dots for high throughput and versatile photoelectrochemical bioanalysis.

Most of the photoelectrochemical (PEC) bioassays need to immobilize biomolecules on electrodes, which lead to tedious modification processes, damaged biomolecules, as well as crippled sensitivity/accuracy and low throughput of the performances. To overcome these drawbacks, we now introduce an exquisitely split-mode (which separates the bioreaction (performed in microplates) from the PEC detection (conducted in PEC cell)) cathodic photoelectrochemistry for probing versatile biocatalytic events with high throughput. Specifically, the enzymatically in situ generated 1,2-bezoquinone was covalently attached onto the PbSe quantum dots (QDs) modified indium tin oxide (ITO) (ITO/PbSe) photocathode through the connector of chitosan (CS). And the attached 1,2-bezoquinone acted as an efficient electron acceptor to promote the cathodic photocurrent of the ITO/PbSe electrode, enabling us to probe quinones-generating oxidoreductase (by taking horseradish peroxidase (HRP) as a model) coupled biocatalytic cascades including the alkaline phosphatase (ALP)/HRP and the glucose oxidase (GOx)/HRP cascades. Quantitative probing for ALP activity in a wide linear range of 5.0 × 10-3 to 10 U/L with the detection limit of 1.2 × 10-3 U/L was realized. While a wide linear range of 5.0 × 10-8 to 1.0 × 10-4 moL/L with a quite low detection limit of 1.0 × 10-8 moL/L was obtained for the glucose assay. In addition, this testing protocol was also extended to an immunoassay (taking carcinoembryonic antigen (CEA) as an example) using HRP as a catalytic tracer. The developed bioassays show high sensitivity and good selectivity for CEA detection in the linear range from 0.1 pg/mL to 100 ng/mL with a detection limit of 0.02 pg/mL. Moreover, the proposed detection has distinctive merits because it not only avoids the adverse effects of the surface confined biomolecules for crippling the signal transduction, but also it has enhanced throughput.

Photothermal Soft Nanoballs Developed by Loading Plasmonic Cu2- xSe Nanocrystals into Liposomes for Photothermal Immunoassay of Aflatoxin B1.

Photothermal effects (PTEs) have been greatly concerned with the fast development of new photothermal nanomaterials. Herein we propose a photothermal immunoassay (PTIA) by taking mycotoxins (AFB1) as an example based on the PTEs of plasmonic Cu2- xSe nanocrystals (NCs). By loading plasmonic Cu2- xSe NCs into liposomes to form photothermal soft nanoballs (ptSNBs), on which aptamer of AFB1 previously assembled, a sandwich structure of AFB1 could be formed with the aptamer on ptSNBs and capture antibody. The heat released from the ptSNBs under NIR irradiation, owing to the plasmonic photothermal light-to-heat conversion through photon-electron-phonon coupling, makes the temperature of substrate solution increased, and the increased temperature has a linear relationship with the AFB1 content. Owing to the large amounts of plasmonic Cu2- xSe NCs in the ptSNBs, the PTEs get amplified, making AFB1 higher than 1 ng/mL detectable in food even if with a rough homemade immunothermometer. The proposal of PTIA opens a new field of immunoassay including developing photothermal nanostructures, new thermometers, PTIA theory, and so on.

Photoelectrochemical DNA biosensor based on g-C3N4/MoS2 2D/2D heterojunction electrode matrix and co-sensitization amplification with CdSe QDs for the sensitive detection of ssDNA.

A novel enhanced photoelectrochemical (PEC) DNA biosensor, based on a compact heterojunction g-C3N4/MoS2 and co-sensitization effect with CdSe quantum dots (QDs), was first proposed for simple and accurate analysis of a short ssDNA. In this work, the g-C3N4/MoS2 was successfully synthesized and used as the electrode matrix material to construct PEC biosensor. 2D/2D heterojunction was formed between g-C3N4 and MoS2, which could promote the separation of photogenerated electron-hole pairs resulting in an enhanced photocurrent. In the presence of target DNA, CdSe QDs labeled reporter DNA was complementary pairing with target DNA which was specific recognized by capture DNA loading on self-assembled CdS QDs film, leading to close contact between CdSe QDs and g-C3N4/MoS2 modified electrode surface, thereby resulting in the enhanced photocurrent intensity due to the co-sensitization effect. Under the optimal operating conditions, the photoelectrochemical biosensor demonstrated favorable accuracy and could respond to 0.32 pM (S/N = 3) with a linear concentration range from 1.0 pM to 2.0 µM. Moreover, the proposed PEC DNA biosensor exhibits high sensitivity, excellent specificity, acceptable reproducibility and accuracy, showing a promising potential in DNA bioanalysis and other relative fields.

Mo2 C as Non-Noble Metal Co-Catalyst in Mo2 C/CdS Composite for Enhanced Photocatalytic H2 Evolution under Visible Light Irradiation.

Co-catalysts are a major factor to enhance photocatalytic H2 activity; they are mainly composed of expensive noble metals. Here, we reported a new non-noble-metal co-catalyst Mo2 C that efficiently improves the photocatalytic H2 evolution of CdS under visible light irradiation. Mo2 C is prepared by temperature-programmed reaction with molybdenum oxide as precursor, and the Mo2 C/CdS composite is prepared by deposition of CdS on Mo2 C. The optimum composite 2.0 % Mo2 C/CdS shows a high H2 evolution rate of 161 µmol h(-1) , which is ten times higher than that of CdS alone and 2.3 times higher than the optimum for 1.0 % Pt/CdS. Moreover, the Mo2 C/CdS is stable for 50 h. This study presents a new low-cost non-noble-metal co-catalyst as a photocatalyst to achieve highly efficient H2 evolution.

Aerogels from CdSe/CdS Nanorods with Ultra-long Exciton Lifetimes and High Fluorescence Quantum Yields.

Hydrogels are fabricated from CdSe/CdS seeded nanorod building blocks by the addition of hydrogen peroxide and converted to aerogels by supercritical drying. The aerogels show higher photoluminescence quantum yields and longer lifetimes than the hydrogels and the nanoparticle solutions. A model for this observation is derived.

Recombinant protein (EGFP-Protein G)-coated PbS quantum dots for in vitro and in vivo dual fluorescence (visible and second-NIR) imaging of breast tumors.

We report a one-step synthetic strategy for the preparation of recombinant protein (EGFP-Protein G)-coated PbS quantum dots for dual (visible and second-NIR) fluorescence imaging of breast tumors at the cellular and whole-body level.

Construction of photoelectrochemical thrombin aptasensor via assembling multilayer of graphene-CdS nanocomposites.

A photoelectrochemical (PEC) aptasensor for highly sensitive and specific detection of thrombin was developed by using graphene­CdS nanocomposites multilayer as photoactive species and electroactive mediator hexaammineruthenium(III) chloride (Ru(NH(3))(6)(3+)) as signal enhancer. Graphene­CdS nanocomposites (G­CdS) were synthesized by one-pot reduction of oxide graphene and CdCl2 with thioacetamide. The photoactive multilayer was prepared by alternative assembly of the negatively charged 3-mercaptopropionic acid modified graphene­CdS nanocomposites (MPA-G­CdS) and the positively charged polyethylenimine (PEI) on ITO electrode. This layer-by-layer assembly method enhanced the stability and homogeneity of the photocurrent readout of G­CdS. Thrombin aptamer was covalently bound to the multilayer by using glutaraldehyde as cross-linking. Electroactive mediator (Ru(NH(3))(6)(3+)) could interact with the DNA phosphate backbone and thus facilitated the electron transfer between G­CdS multilayer and electrode and enhanced the photocurrent. Hybridizing of a long complementary DNA with thrombin aptamer could increase the adsorption amount of (Ru(NH(3))(6)(3+)), which in turn boosted the signal readout. In the presence of target thrombin, the affinity interaction between thrombin and its aptamer resulted in the long complementary DNA releasing from the G­CdS multilayer and decreasing of photocurrent signal. On the basis of G­CdS multilayer as the photoactive species, (Ru (NH(3))(6)(3+)) as an electroactive mediator, and aptamer as a recognition module, a high sensitive PEC aptasensor for thrombin detection was proposed. The thrombin aptasensor displayed a linear range from 2.0 pM to 600.0 pM and a detection limit of 1.0 pM. The present strategy provided a promising ideology for the future development of PEC biosensor.

Vectorial electron transfer for improved hydrogen evolution by mercaptopropionic-acid-regulated CdSe quantum-dots-TiO2 -Ni(OH)2 assembly.

A visible-light-induced hydrogen evolution system based on a CdSe quantum dots (QDs)-TiO2 -Ni(OH)2 ternary assembly has been constructed under an ambient environment, and a bifunctional molecular linker, mercaptopropionic acid, is used to facilitate the interaction between CdSe QDs and TiO2 . This hydrogen evolution system works effectively in a basic aqueous solution (pH 11.0) to achieve a hydrogen evolution rate of 10.1 mmol g(-1) h(-1) for the assembly and a turnover frequency of 5140 h(-1) with respect to CdSe QDs (10 h); the latter is comparable with the highest value reported for QD systems in an acidic environment. X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and control experiments demonstrate that Ni(OH)2 is an efficient hydrogen evolution catalyst. In addition, inductively coupled plasma optical emission spectroscopy and the emission decay of the assembly combined with the hydrogen evolution experiments show that TiO2 functions mainly as the electron mediator; the vectorial electron transfer from CdSe QDs to TiO2 and then from TiO2 to Ni(OH)2 enhances the efficiency for hydrogen evolution. The assembly comprises light antenna CdSe QDs, electron mediator TiO2 , and catalytic Ni(OH)2 , which mimics the strategy of photosynthesis exploited in nature and takes us a step further towards artificial photosynthesis.

Sample-averaged biexciton quantum yield measured by solution-phase photon correlation.

The brightness of nanoscale optical materials such as semiconductor nanocrystals is currently limited in high excitation flux applications by inefficient multiexciton fluorescence. We have devised a solution-phase photon correlation measurement that can conveniently and reliably measure the average biexciton-to-exciton quantum yield ratio of an entire sample without user selection bias. This technique can be used to investigate the multiexciton recombination dynamics of a broad scope of synthetically underdeveloped materials, including those with low exciton quantum yields and poor fluorescence stability. Here, we have applied this method to measure weak biexciton fluorescence in samples of visible-emitting InP/ZnS and InAs/ZnS core/shell nanocrystals, and to demonstrate that a rapid CdS shell growth procedure can markedly increase the biexciton fluorescence of CdSe nanocrystals.

Highly efficient multiple-layer CdS quantum dot sensitized III-V solar cells.

In this review, the concept of utilization of solar spectrum in order to increase the solar cell efficiency is discussed. Among the three mechanisms, down-shifting effect is investigated in detail. Organic dye, rare-earth minerals and quantum dots are three most popular down-shift materials. While the enhancement of solar cell efficiency was not clearly observed in the past, the advances in quantum dot fabrication have brought strong response out of the hybrid platform of a quantum dot solar cell. A multiple layer structure, including PDMS as the isolation layer, is proposed and demonstrated. With the help of pulse spray system, precise control can be achieved and the optimized concentration can be found.

Characterization measurement of a thick CdTe detector for BNCT-SPECT - detection efficiency and energy resolution.

Author׳s group is carrying out development of BNCT-SPECT with CdTe device, which monitors the therapy effect of BNCT in real-time. From the design calculations, the dimensions were fixed to 1.5×2×30mm(3). For the collimator it was confirmed that it would have a good spatial resolution and simultaneously the number of counts would be acceptably large. After producing the CdTe crystal, the characterization measurement was carried out. For the detection efficiency an excellent agreement between calculation and measurement was obtained. Also, the detector has a very good energy resolution so that gamma-rays of 478keV and 511keV could be distinguished in the spectrum.

Stimulated emission and lasing from CdSe/CdS/ZnS core-multi-shell quantum dots by simultaneous three-photon absorption.

Three-photon pumped stimulated emission and coherent random lasing from colloidal CdSe/CdS/ZnS core-multishell quantum dots are achieved for the first time. These results can offer new possibilities in biology and photonics, as well as at their intersection of biophotonics.

Incidence of the core composition on the stability, the ROS production and the toxicity of CdSe quantum dots.

Mercaptosuccinic acid-capped CdSe and alloyed CdSe(S) QDs were prepared in aqueous solution at 100 and 170°C, respectively. These dots were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and UV-vis and photoluminescence spectroscopies. The dots were found to be of similar size (ca. 2nm) but differ in their composition and surface chemistry. The photostability of the QDs was found to correlate with their ability to produce reactive oxygen species (ROS) upon light activation. CdSe QDs produce hydroxyl radicals immediately after irradiation due to their modest photostability, while CdSe(S) QDs start to generate the hydroxyl radicals only once they start to be bleached (ca. 30min). Cytotoxicity experiments conducted on Escherichia coli cells revealed that CdSe QDs were the more toxic despite being the least loaded in cadmium. In addition, consistent with ROS assays, the cytotoxicity of the CdSe QDs appeared light-dependent and is in accordance with a light-dependent oxidative stress observed with an oxyR-based whole cell biosensor. Our results demonstrate the crucial role played by nanoparticles synthesis process on their PL properties, their stability and their toxicity.