Preparation and Evaluation of Clarithromycin Taste-Masking Dry Suspension Using Hot Melt Extrusion Based on Solid Dispersion Technology.

Clarithromycin (CLA) is the preferred drug for treating respiratory infections in pediatric patients, but it has the drawbacks of extreme bitterness and poor water solubility. The purpose of this study was to improve solubility and mask the extreme bitterness of CLA. We use Hot Melt Extrusion (HME) to convert CLA and Eudragit® E100 into Solid Dispersion (SD). Differential scanning calorimetry (DSC) and Powder X-ray diffraction (PXRD) were used to identify the crystalline form of the prepared SDs, which showed that the crystalline CLA was converted to an amorphous form. At the same time, an increase in dissolution rate was observed, which is one of the properties of SD. The results showed that the prepared SD significantly increased the dissolution rate of crystalline CLA. Subsequently, the SD of CLA was prepared into a dry suspension with excellent suspending properties and a taste-masking effect. The bitterness bubble chart and taste radar chart showed that the SD achieved the bitter taste masking of CLA. Principal components analysis (PCA) of the data generated by the electronic tongue showed that the bitter taste of CLA was significantly suppressed using the polymer Eudragit® E100. Subsequently, a dry suspension was prepared from the SD of CLA. In conclusion, this work illustrated the importance of HME for preparing amorphous SD of CLA, which can solve the problems of bitterness-masking and poor solubility. It is also significant for the development of compliant pediatric formulations.

Design of Experiments-Driven Optimization of Spray Drying for Amorphous Clotrimazole Nanosuspension.

This study employed a Quality by Design (QbD) approach to spray dry amorphousclotrimazole nanosuspension (CLT-NS) consisting of Soluplus® and microcrystallinecellulose. Using the Box-Behnken Design, a systematic evaluation was conducted toanalyze the impact of inlet temperature, % aspiration, and feed rate on the criticalquality attributes (CQAs) of the clotrimazole spray-dried nanosuspension (CLT-SDNS). In this study, regression analysis and ANOVA were employed to detect significantfactors and interactions, enabling the development of a predictive model for the spraydrying process. Following optimization, the CLT-SD-NS underwent analysis using Xraypowder diffraction (XRPD), Fourier transform infrared spectroscopy (FTIR), Dynamic Scanning Calorimetry (DSC), and in vitro dissolution studies. The resultsshowed significant variables, including inlet temperature, feed rate, and aspiration rate,affecting yield, redispersibility index (RDI), and moisture content of the final product. The models created for critical quality attributes (CQAs) showed statistical significanceat a p-value of 0.05. XRPD and DSC confirmed the amorphous state of CLT in theCLT-SD-NS, and FTIR indicated no interactions between CLT and excipients. In vitrodissolution studies showed improved dissolution rates for the CLT-SD-NS (3.12-foldincrease in DI water and 5.88-fold increase at pH 7.2 dissolution media), attributed torapidly redispersing nanosized amorphous CLT particles. The well-designed studyutilizing the Design of Experiments (DoE) methodology.

Dynamics of an aqueous suspension of short hyaluronic acid chains near a DPPC bilayer.

The synergy between hyaluronic acid (HA) and lipid molecules plays a crucial role in synovial fluids, cell coatings, etc. Diseased cells in cancer and arthritis show changes in HA concentration and chain size, impacting the viscoelastic and mechanical properties of the cells. Although the solution behavior of HA is known in experiments, a molecular-level understanding of the role of HA in the dynamics at the interface of HA-water and the cellular boundary is lacking. Here, we perform atomistic molecular dynamics simulation of short HA chains in an explicit water solvent in the presence of a DPPC bilayer, relevant in pathological cases. We identify a stable interface between HA-water and the bilayer where the water molecules are in contact with the bilayer and the HA chains are located away without any direct contact. Both translation and rotation of the interfacial waters in contact with the lipid bilayer and translation of the HA chains exhibit subdiffusive behavior. The diffusive behavior sets in slightly away from the bilayer, where the diffusion coefficients of water and HA decrease monotonically with increase in HA concentration. On the contrary, the dependence on HA chain size is only marginal due to enhanced chain flexibility as their size increases.

Modelling the effects of charge on antibiotic diffusion and adsorption in liquid crystalline virus suspensions.

We develop a microscopic model of antibiotic diffusion in virus suspensions in a liquid crystalline state. We then approximate this with an effective homogenised model that is more amenable to analytical investigation, to understand the effect of charge on the antibiotic tolerance. We show that liquid crystalline virus suspensions slow down antibiotics significantly, and that electric charge strongly contributes to this by influencing the effective diameter and adsorptive capacity of the liquid crystalline viruses so that charged antibiotics diffuse much slower than neutral ones; this can be directly and efficiently derived from the homogenised model and is in good agreement with experiments in microbiology. Charge is also found to affect the relationship between antibiotic diffusion and viral packing density in a nontrivial way. The results elucidate the effect of charge on antibiotic tolerance in liquid crystalline biofilms in a manner that is straightforwardly extendable to other soft matter systems.

Nanosuspension-Loaded Dissolving Microneedle Patches for Enhanced Transdermal Delivery of a Highly Lipophilic Cannabidiol.

Purpose: Transdermal Drug Delivery System (TDDS) offers a promising alternative for delivering poorly soluble drugs, challenged by the stratum corneum's barrier effect, which restricts the pool of drug candidates suitable for TDDS. This study aims to establish a delivery platform specifically for highly lipophilic drugs requiring high doses (log P > 5, dose > 10 mg/kg/d), to improve their intradermal delivery and enhance solubility. Methods: Cannabidiol (CBD, log P = 5.91) served as the model drug. A CBD nanosuspension (CBD-NS) was prepared using a bottom-up method. The particle size, polydispersity index (PDI), zeta potential, and concentration of the CBD-NS were characterized. Subsequently, CBD-NS was incorporated into dissolving microneedles (DMNs) through a one-step manufacturing process. The intradermal dissolution abilities, physicochemical properties, mechanical strength, insertion depth, and release behavior of the DMNs were evaluated. Sprague-Dawley (SD) rats were utilized to assess the efficacy of the DMN patch in treating knee synovitis and to analyze its skin permeation kinetics and pharmacokinetic performance. Results: The CBD-NS, stabilized with Tween 80, exhibited a particle size of 166.83 ± 3.33 nm, a PDI of 0.21 ± 0.07, and a concentration of 46.11 ± 0.52 mg/mL. The DMN loaded with CBD-NS demonstrated favorable intradermal dissolution and mechanical properties. It effectively increased the delivery of CBD into the skin, extended the action's duration in vivo, and enhanced bioavailability. CBD-NS DMN exhibited superior therapeutic efficacy and safety in a rat model of knee synovitis, significantly inhibiting TNF-α and IL-1ß compared with the methotrexate subcutaneous injection method. Conclusion: NS technology effectively enhances the solubility of the poorly soluble drug CBD, while DMN facilitates penetration, extends the duration of action in vivo, and improves bioavailability. Furthermore, CBD has shown promising therapeutic outcomes in treating knee synovitis. This innovative drug delivery system is expected to offer a more efficient solution for the administration of highly lipophilic drugs akin to CBD, thereby facilitating high-dose administration.

Effect of high acyl gellan gum and pH on the structural and foaming properties of heated whey protein suspensions.

Effects of association between high-acyl gellan gum and whey protein on heat-induced aggregation and foaming properties of aggregates were assessed in aqueous suspensions. Associative complexes were identified by turbidity and colloidal charge below pH 6, and a balance of charge in the complexes was achieved at pH 5 with a 5:1 protein:polysaccharide ratio. As gellan gum content increased, size of aggregates formed by heating at pH 5 decreased (>1000 nm to 200-300 nm). Microscopy showed polysaccharide chains adhered to spherical aggregates at pH 5 and 6. Gellan gum added to protein before heating did not increase foam volume yet doubled foam half-life at pH 5 when used at a 2:1 protein-to-polysaccharide ratio. Microscopy showed that protein aggregates with attached gellan gum were present in drained foams. These findings indicate that gellan gum improves foam stability of heated whey protein at pH 5 by reducing aggregate size and adhering to aggregates.

Viscosity of Suspensions of Strongly Bonded Spherical Particles of Nickel-Manganese-Cobalt Mixed Oxides (NMC) in Molten Poly(Ethylene Carbonate) for Batteries.

Ionically conductive polymers highly filled with active materials, such as metal oxides are increasingly studied for their potential use in all solid-state batteries. They offer the desirable processing ease of polymers for mass production despite interfacial issues that remain to be solved. In this study, it is shown that spherical particles of transition metal oxides can be introduced in co-polymers of alkene carbonate and ethylene oxide at loading close to the maximum packing fraction, without imparting the processability in the melt of the material. In particular, the viscosity does not show any yield stress and the increase of viscosity shows that the intrinsic viscosity of the filler does not match with the usual 2.5 value in the limit of the Einstein's equation. Conversely, rheological data show that the value is rather close to unity consistently with theoretical arguments that predicted that this scaling factor should be unity when particle rotation is precluded. In the present case, this behavior is attributed to strong bonding between polymer and filler that is proved by electronic microscopy and by dynamical mechanical spectroscopy showing a relaxation due to bound polymer.

Tracking colloidal silica particles to evaluate their dispersion and interactions in concentrated suspensions under shear force applications.

This study aimed to characterize interactions within colloidal silica particles in their concentrated suspensions, using rheo-confocal measurements and imaging, followed by image analysis. We studied the effect of shear rate (0-500 s-1) and solution pH (6, 10) on the dispersion degree of colloidal silica particles via the determination and comparison of interparticle distances and their modeling. Images corresponding to different shear rates were analyzed to identify the coordinates of the particles. These coordinates were further analyzed to calculate the distance among the particles and then their surface-to-surface distance normalized by the particle diameter (H/D). It was found that the population of the particles per unit area of the image and H/D varied with increasing shear rate. The comparison between experimentally measured and theoretically calculated H/D identified that for some particles, the former was shorter than the latter, indicating the unexpected attractions among them against the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. Then, the modification of previously reported equations for H/D was suggested and confirmed its validity. Assuming pair potential interaction and hydrodynamic interaction were the main non-DLVO interactions, their magnitudes were calculated and confirmed the significance of pH and shear application strength on particle dispersion/coagulation.