RESUMEN
BACKGROUND: We previously reported a flow path-ultraviolet C (UVC) irradiation system for platelet concentrates (PCs) with platelet additive solution (PAS) to minimize contamination by bacteria. Here, we investigated functionalities of irradiated platelets (PLTs) in in vitro thrombus formation and in vivo hemostasis. STUDY DESIGN AND METHODS: PAS-PCs were irradiated with flash UVC using the flow path system. Their variables (PLT count, mean platelet volume, pH, glucose, lactate, glycoprotein [GP] Ib, and activated integrin αIIbß3) were evaluated. Static adhesion to collagen or fibrinogen was analyzed using fluorescent microscopy. Thrombus formation under flow conditions was assessed using a collagen-coated bead column. Adenosine diphosphate (ADP)-induced Akt phosphorylation was determined by western blot. In vivo hemostasis and circulatory survival of PLTs were assessed with a rabbit bleeding model. RESULTS: All variables, except for GPIb expression, were slightly, but significantly, impaired after flash UVC irradiation throughout the 6-day storage period. No difference was observed in static adhesion to either collagen or fibrinogen between irradiated and nonirradiated PAS-PCs. In vitro thrombus formation of flash UVC-irradiated PAS-PCs was significantly greater than that of nonirradiated PAS-PCs. ADP-induced Akt phosphorylation was enhanced in irradiated PAS-PCs. In vivo hemostatic efficacy was comparable between the groups on Day 1. The efficacy declined in nonirradiated PAS-PCs on Day 5, while it was retained in flash UVC-irradiated PAS-PCs. Circulatory survival of PLTs was lower in irradiated PAS-PCs. CONCLUSIONS: PAS-PCs irradiated with UVC from xenon flash have favorable properties to achieve hemostasis compared with nonirradiated PAS-PCs.
Asunto(s)
Plaquetas/metabolismo , Hemostasis/fisiología , Trombosis/metabolismo , Rayos Ultravioleta/efectos adversos , Xenón/efectos adversos , Adenosina Difosfato/metabolismo , Animales , Bacterias/efectos de la radiación , Plaquetas/efectos de la radiación , Colágeno/metabolismo , Colágeno/efectos de la radiación , Fibrinógeno/metabolismo , Fibrinógeno/efectos de la radiación , Hemostasis/efectos de la radiación , Humanos , Masculino , Volúmen Plaquetario Medio/estadística & datos numéricos , Microscopía Fluorescente/métodos , Modelos Animales , Complejo GPIIb-IIIa de Glicoproteína Plaquetaria/metabolismo , Complejo GPIIb-IIIa de Glicoproteína Plaquetaria/efectos de la radiación , Complejo GPIb-IX de Glicoproteína Plaquetaria/metabolismo , Complejo GPIb-IX de Glicoproteína Plaquetaria/efectos de la radiación , Plaquetoferesis/métodos , Conejos , Xenón/efectos de la radiaciónRESUMEN
This paper described the utility of tetragonal nano-zirconia (t-ZrO2) to remove trace levels of ¹³4Cs and ¹³7Cs contaminants from ¹²5I solution obtained from neutron irradiation of natural Xe target. A careful scrutiny of the adsorption parameters of t-ZrO2 was considered worthwhile investigating to arrive at the optimum conditions to perform the purification as well as concentration of ¹²5I solution. The procedure proposed herein provides ¹²5I of acceptable purity and radioactive concentration for clinical application. The compatibility of the separated product in the preparation of ¹²5I brachytherapy sources was found to be satisfactory.
Asunto(s)
Radioisótopos de Yodo/aislamiento & purificación , Nanopartículas del Metal , Circonio , Adsorción , Braquiterapia , Radioisótopos de Cesio/aislamiento & purificación , Cromatografía Liquida , Contaminación de Medicamentos , Humanos , Radioisótopos de Yodo/uso terapéutico , Generadores de Radionúclidos , Radiofármacos/aislamiento & purificación , Radiofármacos/uso terapéutico , Soluciones , Xenón/efectos de la radiaciónRESUMEN
The synchrotron radiation (SR) stimulated etching of silicon elastomer polydimethylsiloxane (PDMS) using XeF(2) as an etching gas has been demonstrated. An etching system with differential pumps and two parabolic focusing mirrors was constructed to perform the etching. The PDMS was found to be effectively etched by the SR irradiation under the XeF(2) gas flow, and the etching process was area-selective and anisotropic. An extremely high etching rate of 40-50 microm (10 min)(-1) was easily obtained at an XeF(2) gas pressure of 0.2-0.4 torr. This suggests that SR etching using XeF(2) gas provides a new microfabrication technology for thick PDMS membranes, which can open new applications such as the formation of three-dimensional microfluidic circuits.
Asunto(s)
Fluoruros/química , Nanoestructuras/química , Nanoestructuras/ultraestructura , Nanotecnología/métodos , Sincrotrones , Xenón/química , Fluoruros/efectos de la radiación , Gases/química , Gases/efectos de la radiación , Ensayo de Materiales , Nanoestructuras/efectos de la radiación , Propiedades de Superficie , Rayos X , Xenón/efectos de la radiaciónRESUMEN
A cryogenic Xe jet system with an annular nozzle has been developed in order to continuously fast supply a Xe capillary target for generating a laser-plasma extreme ultraviolet (EUV) source. The cooling power of the system was evaluated to be 54 W, and the temperature stability was +/-0.5 K at a cooling temperature of about 180 K. We investigated experimentally the influence of pressure loss inside an annular nozzle on target formation by shortening the nozzle length. Spraying caused by cavitation was mostly suppressed by mitigating the pressure loss, and a focused jet was formed. Around a liquid-solid boundary, a solid-Xe capillary target (10070 microm phi) was formed with a velocity of < or =0.01 ms. Laser-plasma EUV generation was tested by focusing a Nd:YAG laser beam on the target. The results suggested that an even thinner-walled capillary target is required to realize the inertial confinement effect.
Asunto(s)
Rayos Láser , Microfluídica/instrumentación , Refrigeración/instrumentación , Rayos Ultravioleta , Xenón/química , Xenón/efectos de la radiación , Acción Capilar , Gases/química , Microfluídica/métodos , Refrigeración/métodos , Dispersión de RadiaciónRESUMEN
The interaction of xenon with beta-cryptogein, a basic 10 kDa protein belonging to the elicitin family, has been studied by using dissolved thermal and laser-polarized gas in liquid-state NMR. 13C and 1H chemical-shift-mapping experiments were unfruitful, the proton lines only experienced a slight narrowing but no significant frequency variation when the xenon concentration was increased. Nevertheless magnetization transfer from hyperpolarized xenon to protons of the protein demonstrates an undoubted interaction and enables localization of the noble-gas-binding site. Due to the proton-proton cross-relaxation efficiency, however, this experiment is subjected to important spin-diffusion. An automatic procedure that takes spin-diffusion into account when assigning the protons that interact with xenon is then used. The binding site, as defined by 30 Xe--H interactions, is situated in the inner core of the protein. The protons that interact with xenon border the channel by which sterols are known to enter into the cavity. These results support the idea that xenon is a good probe for hydrophobic protein regions.
Asunto(s)
Proteínas Algáceas/química , Interacciones Hidrofóbicas e Hidrofílicas , Rayos Láser , Espectroscopía de Resonancia Magnética/métodos , Espectroscopía de Resonancia Magnética/normas , Xenón/química , Sitios de Unión , Isótopos de Carbono , Cristalografía por Rayos X , Proteínas Fúngicas , Modelos Moleculares , Conformación Proteica , Protones , Estándares de Referencia , Sensibilidad y Especificidad , Xenón/efectos de la radiaciónRESUMEN
A single-shot pulsed gradient stimulated echo sequence is introduced to address the challenges of diffusion measurements of laser polarized 3He and 129Xe gas. Laser polarization enhances the NMR sensitivity of these noble gases by >10(3), but creates an unstable, nonthermal polarization that is not readily renewable. A new method is presented which permits parallel acquisition of the several measurements required to determine a diffusive attenuation curve. The NMR characterization of a sample's diffusion behavior can be accomplished in a single measurement, using only a single polarization step. As a demonstration, the diffusion coefficient of a sample of laser-polarized 129Xe gas is measured via this method.