Valorisation of walnut shell and pea pod as novel sources for the production of xylooligosaccharides.

According to the high interest in agro-industrial waste reutilisation, underutilised lignocellulosic materials, such as walnut shell (WS) and pea pod (PP), come in focus. The aim of this paper was to evaluate WS and PP as sources for the production of xylooligosaccharides (XOS). Hemicelluloses from WS and PP were recovered by combining varying parameters of delignification and alkaline extraction. At optimal recovery conditions, the fractions were further hydrolysed to XOS using GH11 endo-xylanase, by varying time and enzyme concentration. Xylose was predominant in the monomeric composition of the obtained hemicelluloses, building low-branched (arabino)glucuronoxylan, in WS exclusively, while in PP some xyloglucan as well. Delignification was essential for high recovery of total xylose from the materials, up to at least 70 %. High xylan conversions were obtained for 24 h hydrolysis, resulting in xylobiose and xylotriose when using low enzyme concentration, while in xylose and xylobiose with high enzyme concentration.

Extraction and characterization of xylan from sugarcane tops as a potential commercial substrate.

Xylan is the major hemicellulose present in sugarcane stem secondary cell walls. Xylan is composed of xylose backbone with a high degree of substitutions, which affects its properties. In the present study, the xylan from sugarcane tops (SCT) was extracted and characterized. Compositional analysis of xylan extracted from SCT (SCTx) displayed the presence of 74% of d-xylose residues, 16% of d-glucuronic acid residues and 10% of l-arabinose. High performance size exclusion chromatographic analysis of SCTx displayed a single peak corresponding to a molecular mass of ∼57 kDa. The Fourier transform infrared spectroscopic analysis of SCTx displayed the peaks corresponding to those obtained from commercial xylan. FESEM analysis of SCTx showed the granular and porous surface structure. Differential thermogravimetric analysis (DTG) of SCTx displayed two thermal degradation temperatures (Td) of 228°C, due to breakdown of the side chains of glucuronic acid and arabinose and 275°C, due to breakdown of xylan back bone. The presence of arabinose and glucuronic acid as a side chains was confirmed by the DTG and thermogravimetric analysis. The CHNS analysis of SCTx showed the presence of only carbon and hydrogen supporting its purity. The recombinant xylanase (CtXyn11A) from Clostridium thermocellum displayed a specific activity of 1394 ± 51 U/mg with SCTx, which was higher than those with commercial xylans. The thin layer chromatography and electrospray ionization mass spectroscopy analyses of CtXyn11A hydrolysed SCTx contained a series of linear xylo-oligosaccharides ranging from degree of polymerization 2-6 and no substituted xylo-oligosaccharides because of the endolytic activity of enzyme. The extracted xylan from SCT can be used as an alternative commercial substrate and for oligo-saccharide production.

Composition, physicochemical properties, and anti-fatigue activity of water-soluble okra (Abelmoschus esculentus) stem pectins.

Okra, Abelmoschus esculentus (L.) Moench, an annual herbaceous plant, is widely distributed in tropical and subtropical regions. Water-soluble pectic hydrocolloids from okra stems (HOS) were extracted and purified using polydivinylbenzene HP-20 resins. The sugar composition of the purified HOS with an weight-average molecular weight of 178.4 ± 2.1 kDa and a polydispersity index of 1.02 ± 0.02 contained galacturonic acid (34%), galactose (31%), rhamnose (21%), arabinose (4.2%), glucuronic acid (2.5%), xylose (1.2%), and other monosaccharides (6.1%) by weight. Its favorable rheological behaviors were evident on relatively higher concentrations (20, 25, and 30 mg/mL) and moderately lower pH levels (3 and 5) of HOS. The anti-fatigue experiments in vivo demonstrated that a high dose of HOS (450 mg/kg feed) prolonged the exhaustive swimming time of mice, significantly induced an increase in blood glucose and glycogen, and decreased lactic acid and serum urea nitrogen levels. HOS digestion in vivo was fairly conducive to the improvement of energy storage capacity and renal function for physically induced fatigue, compared with the conventional herbal supplement Panax quinquefolium. Accordingly, HOS exhibits potential for reutilization of okra stem waste.

Immunoactive polysaccharides produced by heterotrophic mutant of green microalga Parachlorella kessleri HY1 (Chlorellaceae).

Hot water extract from biomass of heterotrophic mutant green alga Parachlorella kessleri HY1 (Chlorellaceae) was deproteinised, and three polysaccharidic fractions were obtained by preparative chromatography. The low-molecular fraction (1.5 × 104g mol-1) was defined mainly as branched O-2-ß-xylo-(1→3)-ß-galactofuranan where xylose is partially methylated at O-4. Two high-molecular fractions (3.05 × 105 and 9.84 × 104g mol-1) were complex polysaccharides containing α-l-rhamnan and xylogalactofuranan parts in different ratios. The polysaccharides were well soluble in hot water and, upon cooling, tended to self-segregate. Immunomodulatory activities of the obtained fractions were preliminary tested using ELISA, FACS and ImmunoSpot kits. The polysaccharides increased the TNF-α production in melanoma bearing mice with much higher intensity than in healthy mice. This was in agreement with the FACS results on T and B cells indicating their possibly secondary activation by innate immunity cells.

Single cell oil production by a novel yeast Trichosporon mycotoxinivorans for complete and ecofriendly valorization of paddy straw

Background: Oleaginous yeasts can be grown on different carbon sources, including lignocellulosic hydrolysate containing a mixture of glucose and xylose. However, not all yeast strains can utilize both the sugars for lipogenesis. Therefore, in this study, efforts were made to isolate dual sugar-utilizing oleaginous yeasts from different sources. Results: A total of eleven isolates were obtained, which were screened for their ability to utilize various carbohydrates for lipogenesis. One promising yeast isolate Trichosporon mycotoxinivorans S2 was selected based on its capability to use a mixture of glucose and xylose and produce 44.86 ± 4.03% lipids, as well as its tolerance to fermentation inhibitors. In order to identify an inexpensive source of sugars, nondetoxified paddy straw hydrolysate (saccharified with cellulase), supplemented with 0.05% yeast extract, 0.18% peptone, and 0.04% MgSO4 was used for growth of the yeast, resulting in a yield of 5.17 g L−1 lipids with conversion productivity of 0.06 g L−1 h−1 . Optimization of the levels of yeast extract, peptone, and MgSO4 for maximizing lipid production using Box­Behnken design led to an increase in lipid yield by 41.59%. FAME analysis of single cell oil revealed oleic acid (30.84%), palmitic acid (18.28%), and stearic acid (17.64%) as the major fatty acids. Conclusion: The fatty acid profile illustrates the potential of T. mycotoxinivorans S2 to produce single cell oil as a feedstock for biodiesel. Therefore, the present study also indicated the potential of selected yeast to develop a zero-waste process for the complete valorization of paddy straw hydrolysate without detoxification

Isolations, characterizations and bioactivities of polysaccharides from the seeds of three species Glycyrrhiza.

In this paper, polysaccharides from the seeds of three species of genus Glycyrrhiza were extracted to investigate the physicochemical properties, structural characteristics and antioxidant activities. The polysaccharides were composed of xylose, mannose, galactose, and glucose with different molar ratio. Fourier transform infrared spectroscopy showed the presence of key functional groups of polysaccharides whereas scanning electron microscopy analysis revealed the characteristic morphology of different polysaccharides, and thermogravimetric analysis exhibited good thermal stability of all samples. The antioxidant activities of polysaccharides were evaluated in vitro. All the three polysaccharides demonstrated strong reducing power, as well as scavenging activity against DPPH, ABTS, and hydroxyl free radicals. Antioxidant assays indicated that all the polysaccharides have obvious antioxidant activities and possess a potential development and application value in food, cosmetics as well as pharmaceutical industries.

Sequential ultrasonication and deep eutectic solvent pretreatment to remove lignin and recover xylose from oil palm fronds.

This study demonstrated the effect of two-pot sequential pretreatment, comprising of ultrasound assisted deep eutectic solvent (DES) with the aim to investigate the effects of ultrasound amplitude and duration in enhancing delignification. Oil palm fronds (OPF) were ultrasonicated in a water medium, followed by a pretreatment using DES (choline chloride:urea). Fourier transform infra-red spectroscopy, X-ray diffraction, field emission scanning electron microscope, Brunauer-Emmet-Teller and solubilised lignin concentration were conducted to confirm the effectiveness of ultrasound assisted DES on the pretreatment of OPF. The recommended ultrasound conditions were determined to be 70% amplitude and duration of 30 min, where the sequential DES pretreatment was able to reduce lignin content of OPF to 14.01%, while improving xylose recovery by 58%.

Xylose rich heteroglycan from flaxseed gum mediates the immunostimulatory effects on macrophages via TLR2 activation.

Immunostimulatory activity of the flaxseed gum neutral fraction (NFG) was investigated. NFG was characterized as a xylose rich heteroglycan through monosaccharide composition analysis, FT-IR, methylation/GC-MS, and 1D/2D-NMR. NFG stimulated NO production and phagocytic activity of macrophages. Secretion of interleukin-6, interleukin-1ß, and tumor necrosis factor-α (254.7 pg/mL, 2.5 ng/mL, and 42.9 pg/mL, respectively) was significantly induced by NFG. Mitogen-activated protein kinases of JNK and P38 were activated by NFG with increased phosphorylation of JNK and P38, while NO production was reduced to 6.05 and 4.42 µM by JNK and P38 inhibitor, respectively. Nuclear factor-κB signaling pathway was also activated by NFG with the suppression of IκBα and up-regulation of phosphorylation of IκBα and nuclear factor-κB P65. Toll like receptor-2 was the molecular target of NFG and responsible for the activation of down-stream signaling pathways. Thus, NFG from flaxseed gum may potentially be used as a natural immunomodulator in functional foods.

Efficient Preparation of Xylonic Acid from Xylonate Fermentation Broth by Bipolar Membrane Electrodialysis.

Preparation of xylonic acid from xylonate fermentation broth was studied in a four-chamber bipolar membrane electrodialysis (BMED) setup. The effects of metal-ion size, current density, and xylonate concentration on BMED were evaluated principally with respect to acid yield and partially with respect to efficiency and energy consumption. Sodium xylonate was more successful than potassium xylonate because of its smaller size and easier membrane penetrability for BMDE. Efficient electrodialysis was achieved using 50 mA/cm2 current density for 14 min; thus, we obtained 92% xylonic acid from 100 g/L sodium xylonate fermentation broth. In conclusion, BMED can be used for producing xylonic acid from fermentation broth. Moreover, this study highlights ways of improving the efficiency of BMED.

Hepatoprotective effects of Auricularia cornea var. Li. polysaccharides against the alcoholic liver diseases through different metabolic pathways.

The present work was designed to evaluate the antioxidation and hepatoprotective effects of Auricularia cornea var. Li. polysaccharides (APS) and enzymatic-extractable APS (EAPS) on the acute alcohol-induced alcoholic liver diseases (ALD). The in vitro antioxidant activities demonstrated that both APS and EAPS had strong reducing power and potential effects on scavenging reactive oxygen species. The in vivo mice experiments showed that the pretreatment with APS or EAPS showed potential hepatoprotective effects on the ALD possibly by increasing the antioxidant activities, reducing the lipid peroxidation, improving the alcohol metabolism, inhibiting the expression levels of inflammatory mediators and preventing the alcohol-induced histopathological alterations. In addition, the fourier-transform infrared (FT-IR), 1H and 13C nuclear magnetic resonance spectroscopy (NMR) and gas chromatography (GC) had been analyzed to obtained the primarily characteristics. The results indicated that abundant xylose and glucose contents probably had potential effects on possessing the bioactivities. The findings suggested that the A. cornea var. Li. might be considered as promising natural resource on exploring clinical drugs for the prevention and treatment with ALD and its complications.

Extraction, characterisation and antioxidant activity of polysaccharides from Chinese watermelon.

Extraction and antioxidant activity of polysaccharides from the Chinese watermelon was investigated. The polysaccharides were obtained by hot water extraction, ethanol precipitation, and deproteinization with HCl, respectively. The molecular weight was 3.02 × 104. It showed by high performance liquid chromatography (HPLC) and TLC that Chinese watermelon polysaccharides consisted of six monosaccharides, namely glucose, galactose, mannose, xylose, arabinose, and rhamnose. The polysaccharides contained the ß-glycosidic bond. Moreover, it was proved that the polysaccharides had high scavenging ability to superoxide anions.

Standing wave design and optimization of a simulated moving bed chromatography for separation of xylobiose and xylose under the constraints on product concentration and pressure drop.

The feasibility of a simulated moving bed (SMB) technology for the continuous separation of high-purity xylobiose (X2) from the output of a ß-xylosidase X1→X2 reaction has recently been confirmed. To ensure high economical efficiency of the X2 production method based on the use of xylose (X1) as a starting material, it is essential to accomplish the comprehensive optimization of the X2-separation SMB process in such a way that its X2 productivity can be maximized while maintaining the X2 product concentration from the SMB as high as possible in consideration of a subsequent lyophilization step. To address this issue, a suitable SMB optimization tool for the aforementioned task was prepared based on standing wave design theory. The prepared tool was then used to optimize the SMB operation parameters, column configuration, total column number, adsorbent particle size, and X2 yield while meeting the constraints on X2 purity, X2 product concentration, and pressure drop. The results showed that the use of a larger particle size caused the productivity to be limited by the constraint on X2 product concentration, and a maximum productivity was attained by choosing the particle size such that the effect of the X2-concentration limiting factor could be balanced with that of pressure-drop limiting factor. If the target level of X2 product concentration was elevated, higher productivity could be achieved by decreasing particle size, raising the level of X2 yield, and increasing the column number in the zones containing the front and rear of X2 solute band.

Enantioresolution and quantification of monosaccharides by comprehensive two-dimensional gas chromatography.

This work presents the development of a simple and efficient analytical protocol for the direct enantioselective resolution of sugars. A racemic mixture of the C3 sugar d,l-glyceraldehyde and the C5 monosaccharides d,l-arabinose, d,l-ribose, d,l-xylose, and d,l-lyxose was subjected to derivatization with trifluoroacetic anhydride, and corresponding derivatives were separated on a ß-cyclodextrin column with excellent resolution factors. Even though each aldopentose shows beside the linear form four predominant cyclic hemiacetals being the α- and ß-furanose along with the α- and ß-pyranose, we show that the overall enantiomeric excess of each compound can be precisely determined. Moreover, the measured detection limit for derivatized aldopentoses ranges from 0.015 to 0.019pmol on the column, while the quantification limit varies from 0.5 to 0.64pmol on the column.

A two-stage pretreatment process using dilute hydrochloric acid followed by Fenton oxidation to improve sugar recovery from corn stover.

A two-stage pretreatment process is proposed in this research in order to improve sugar recovery from corn stover. In the proposed process, corn stover is hydrolyzed by dilute hydrochloric acid to recover xylose, which is followed by a Fenton reagent oxidation to remove lignin. 0.7wt% dilute hydrochloric acid is applied in the first stage pretreatment at 120°C for 40min, resulting in 81.0% xylose removal. Fenton reagent oxidation (1g/L FeSO4·7H2O and 30g/L H2O2) is performed at room temperature (about 20°C) for 12 has a second stage which resulted in 32.9% lignin removal. The glucose yield in the subsequent enzymatic hydrolysis was 71.3% with a very low cellulase dosage (3FPU/g). This two-stage pretreatment is effective due to the hydrolysis of hemicelluloses in the first stage and the removal of lignin in the second stage, resulting in a very high sugar recovery with a low enzyme loading.

Low acid hydrothermal fractionation of Giant Miscanthus for production of xylose-rich hydrolysate and furfural.

Low acid hydrothermal (LAH) fractionation was developed for the effective recovery of hemicellulosic sugar (mainly xylose) from Miscanthus sacchariflorus Goedae-Uksae 1 (M. GU-1). The xylose yield was maximized at 74.75% when the M. GU-1 was fractionated at 180°C and 0.3wt.% of sulfuric acid for 10min. At this condition, the hemicellulose (mainly xylan) degradation was 86.41%. The difference between xylan degradation and xylose recovery yield, i.e., xylan loss, was 11.66%, as indicated by the formation of decomposed products. The furfural, the value added biochemical product, was also obtained by 0.42g/L at this condition, which was 53.82% of furfural production yield based on the xylan loss. After then, the furfural production continued to increase to a maximum concentration of 1.87g/L, at which point the xylan loss corresponded to 25.87%.

Removal of furan and phenolic compounds from simulated biomass hydrolysates by batch adsorption and continuous fixed-bed column adsorption methods.

It has been proposed to remove all potential inhibitors and sulfuric acid in biomass hydrolysates generated from dilute-acid pretreatment of biomass, based on three steps of sugar purification process. This study focused on its first step in which furan and phenolic compounds were selectively removed from the simulated hydrolysates using activated charcoal. Batch adsorption experiments demonstrated that the affinity of activated charcoal for each component was highest in the order of vanillic acid, 4-hydroxybenzoic acid, furfural, acetic acid, sulfuric acid, and xylose. The affinity of activated charcoal for furan and phenolic compounds proved to be significantly higher than that of the other three components. Four separation strategies were conducted with a combination of batch adsorption and continuous fixed-bed column adsorption methods. It was observed that xylose loss was negligible with near complete removal of furan and phenolic compounds, when at least one fixed-bed column adsorption was implemented in the strategy.

Extraction Optimization, Purification and Physicochemical Properties of Polysaccharides from Gynura medica.

Extraction of polysaccharides from Gynura medica (GMPs) was optimized by response surface methodology (RSM). A central composition design including three parameters, namely extraction temperature (X1), ratio of water to raw material (X2) and extraction time (X3), was used. The best conditions were extraction temperature of 91.7 °C, extraction time of 4.06 h and ratio of water to raw material of 29.1 mL/g. Under the optimized conditions, the yield of GMPs was 5.56%, which was similar to the predicted polysaccharides yield of 5.66%. A fraction named GMP-1 was obtained after isolation and purification by DEAE-52 and Sephadex G-100 gel chromatography, respectively. GMP-1, with a molecular weight of 401 kDa, mainly consisted of galacturonic acid (GalA), xylose (Xyl), glucose (Glu). Infrared spectroscopy was used to characterize the major functional groups of GMP-1 and the results indicated that it was an acidic polysaccharide. The antioxidant and α-glucosidase inhibitory activities of GMPs and GMP-1 were determined in vitro. The results indicated that GMPs and GMP-1 show potential for use in functional foods or medicines.

Impact of AFEX™ Pretreatment and Extrusion Pelleting on Pellet Physical Properties and Sugar Recovery from Corn Stover, Prairie Cord Grass, and Switchgrass.

The effects of AFEX™ pretreatment, feedstock moisture content (5,10, and 15 % wb), particle size (screen sizes of 2, 4, and 8 mm), and extrusion temperature (75, 100, and 125 °C) on pellet bulk density, pellet hardness, and sugar recovery from corn stover, prairie cord grass, and switchgrass were investigated. Pellets were produced from untreated and AFEX™ pretreated feedstocks using a laboratory-scale extruder. AFEX™ pretreatment increased subsequent pellet bulk density from 453.0 to 650.6 kg m(-3) for corn stover from 463.2 to 680.1 kg m(-3) for prairie cord grass, and from 433.9 to 627.7 kg m(-3) for switchgrass. Maximum pellet hardness of 2342.8, 2424.3, and 1298.6 N was recorded for AFEX™ pretreated corn stover, prairie cord grass, and switchgrass, respectively. Glucose yields of AFEX™ corn stover pellets, prairie cord grass, and switchgrass pellets varied from 88.9 to 94.9 %, 90.1 to 94.9 %, and 87.0 to 92.9 %, respectively. Glucose and xylose yields of AFEX™ pellets were not affected by the extruder barrel temperature and the hammer mill screen size. The results obtained showed that low temperature and large particle size during the extrusion pelleting process can be employed for AFEX™-treated biomass without compromising sugar yields.

Recent advances in alcohol and organic acid fractionation of lignocellulosic biomass.

Organosolv fractionation is a promising process to separate lignocellulosic biomass for the preparation of multiply products including biofuels, chemicals, and materials. This review presents the state of art of different processes applying alcohols and organic acids to treat lignocellulosic biomass for the production of ethanol, lignin, xylose, etc. The major organosolv technologies using ethanol, formic acid, and acetic acid, are intensively introduced and discussed in depth. In addition, the structural modifications of the major components of lignocelluloses, the technical processes, and the applications of the products were also summarized. The object of the review is to provide recent information in the field of organosolv process for the integrated biorefinery. The perspectives of the challenge and opportunity related to this topic are also presented.

Simultaneous Enantioseparation of Aldohexoses and Aldopentoses Derivatized With L-Tryptophanamide by Reversed Phase HPLC Using Butylboronic Acid as a Complexation Reagent of Monosaccharides.

Three aldohexoses, glucose, galactose, and mannose, and three aldopentoses, arabinose, xylose, and ribose, were derivatized with L-tryptophanamide (L-TrpNH2 ) under alkaline conditions. Using a basic mobile phase (pH 9.2), the three aldohexoses or the three aldopentoses were simultaneously enantioseparated, respectively, but all the six monosaccharides could not be simultaneously enantioseparated. A large amount of nonreacted L-TrpNH2 was detected after the derivatized monosaccharides. In order to widen the separation window, a large portion of nonreacted L-TrpNH2 could be eliminated by liquid-liquid extraction with ethylacetate, and elution order of the derivatized monosaccharides and nonreacted L-TrpNH2 was found to be reversed using a neutral mobile phase. All of the six monosaccharides were simultaneously enantioseparated by reversed phase high-performance liquid chromatography (HPLC) using InertSustainSwift C18 column (4.6 mm i.d. × 150 mm) and a mobile phase containing 180 mM phosphate buffer (pH 7.6), 1.5 mM butylboronic acid, and 5% acetonitrile at 40 °C. Nomenclature of D and L for monosaccharides is based on the configurations of the asymmetric C4 center for aldopentoses and C5 center for aldohexoses. It was found that the enantiomer elution order of these six monosaccharides and fucose in the proposed method conformed to be the absolute configuration of the C2 center.