Automated optimization of the solubility of a hyper-stable α-amylase.

Most successes in computational protein engineering to date have focused on enhancing one biophysical trait, while multi-trait optimization remains a challenge. Different biophysical properties are often conflicting, as mutations that improve one tend to worsen the others. In this study, we explored the potential of an automated computational design strategy, called CamSol Combination, to optimize solubility and stability of enzymes without affecting their activity. Specifically, we focus on Bacillus licheniformis α-amylase (BLA), a hyper-stable enzyme that finds diverse application in industry and biotechnology. We validate the computational predictions by producing 10 BLA variants, including the wild-type (WT) and three designed models harbouring between 6 and 8 mutations each. Our results show that all three models have substantially improved relative solubility over the WT, unaffected catalytic rate and retained hyper-stability, supporting the algorithm's capacity to optimize enzymes. High stability and solubility embody enzymes with superior resilience to chemical and physical stresses, enhance manufacturability and allow for high-concentration formulations characterized by extended shelf lives. This ability to readily optimize solubility and stability of enzymes will enable the rapid and reliable generation of highly robust and versatile reagents, poised to contribute to advancements in diverse scientific and industrial domains.

Phytochemical analysis, antioxidant, acetylcholinesterase, and α-amylase inhibitors from extract.

OBJECTIVE: To investigate the effects of Hippeastrum hybridum (HH) as a free radical scavenger, and an inhibitor of the two enzymes i-e Alpha-amylase (α-amylase) and acetylcholinesterase (AChE). METHODS: In this study, HH plant was preliminary analyzed for phytochemical screening and then tested for its antioxidant, anti-α-amylase, and anti-AChE efficiency via standard procedures. RESULTS: Phytochemical analysis shows the existence of different compounds; while Coumarins and quinones were absent. The total phenolic, flavonoid, and tannins content were found to be (78.52 ± 0.69) mg GAE/g, (2.01 ± 0.04) mg RUE/g, and (58.12 ± 0.23) mg TAE/g of plant extract respectively. 28.02% ± 0.02% alkaloid and 2.02% ± 0.05% saponins were present in the HH extract. The HH extract showed the anti-oxidant property with IC50 (50% inhibition) of (151.01 ± 0.13) (HH), (79.01 ± 0.04) (Ascorbic acid) for ferric reducing, (91.48 ± 0.13) (HH), (48.02 ± 0.11) (Ascorbic acid) against Ammonium molybdenum, (156.02 ± 0.31) (HH), (52.38 ± 0.21) (Ascorbic acid) against DPPH, 136.01 ± 0.21 (HH), 52.02± 0.31 (Ascorbic acid) against H2O2, and 154.12 ± 0.03 (HH), (40.05 ± 0.15) (Ascorbic acid) µg/mL against ABTS respectively. Statistical analysis indicated that HH caused a competitive type of inhibition of α-amylase (Vmax remained constant and Km increases from 10.65 to 84.37%) while Glucophage caused the un-competitive type of inhibition i-e both Km and Vmax decreased from 40.49 to 69.15% and 38.86 to 69.61% respectively. The Ki, (inhibition constant); KI, (dissociation constant), Km, (Michaelis-Menten constant), and IC50 were found to be 62, 364, 68.1, and 38.08 ± 0.22 for HH and 12, 101.05, 195, 34.01 ± 0.21 for Glucophage. Similarly, HH causes an anon-competitive type of inhibition of AChE i-e Km remains constant while Vmax decreases from 60.5% to 74.1%. The calculated Ki, KI, Km, and IC50 were found to be 32, 36.2, 0.05, and 18.117 ± 0.018. CONCLUSION: From the current results, it is concluded that HH extract contains bioactive compounds, and could be a good alternative to controlling oxidants, Alzheimer's and Type-II diabetic diseases.

Structural and functional insights of starch processing α-amylase from hyperthermophilic archaeon Pyrococcusabyssi.

The genomic screening of hyper-thermophilic Pyrococcus abyssi showed uncharacterized novel α-amylase sequences. Homology modelling analysis revealed that the α-amylase from P. abyssi consists of an N-terminal GH57 catalytic domain, α-amylase central, and C-terminal domain. Current studies emphasize in-silico structural and functional analysis, recombinant expression, characterization, structural studies through CD spectroscopy, and ligand binding studies of the novel α-amylase from P. abyssi. The soluble expression of PaAFG was observed in the E. coli Rosetta™ (DE3) pLysS strain upon incubation overnight at 18 °C in an orbital shaker. The optimum temperature and pH of the PaAFG were observed at 90 °C in 50 mM phosphate buffer pH 6. The Km value for PaAFG against wheat starch was determined as 0.20 ± 0.053 mg while the corresponding Vmax value was 25.00 ± 0.67 µmol min-1 mg-1 in the presence of 2 mM CaCl2 and 12.5 % glycerol. The temperature ramping experiments through CD spectroscopy reveal no significant change in the secondary structures and positive and negative ellipticities of the CD spectra showing the proper folding and optimal temperature of PaAFG protein. The RMSD and RMSF of the PaAFG enzyme determined through molecular dynamic simulation show the significant protein's stability and mobility. The soluble production, thermostability and broad substrate specificity make this enzyme a promising choice for various industrial applications.

Enzyme-integrated metal-organic framework platform for cascade detection of α-amylase.

As one of the most important industrial enzymes, α-amylase is widely used in food processing, such as starch sugar and fermentation, bringing high added value to industry of more than a trillion dollars. We developed a multi-enzyme system (Glu&Gox@Cu-MOF-74) prepared by embedding α-glucosidase (Glu) and glucose oxidase (Gox) into the biomimetic metal-organic framework Cu-MOF-74 using in situ encapsulation within 15 min at room temperature for efficient and sensitive detection of α-amylase activity. Benefitting from the remarkable peroxidase-mimicking property and rigid skeleton of Cu-MOF-74, the biocatalytic platform exhibited excellent cascade activity and tolerance in various extremely harsh environments compared to natural enzymes. On this basis, a cascade biocatalytic platform was constructed for the detection of α-amylase activity with wide linear range (5-100 U/L) and low limit of detection (1.45 U/L). The colorimetric cascade scheme is important for the sensitive and selective determination of α-amylase in complex fermentation samples, and the detection time is short (∼0.5 h). This work provides new ideas for the detection of α-amylase based on the cascade amplification method.

Enzymatic Assembly of Chitosan-Based Network Polysaccharides and Their Encapsulation and Release of Fluorescent Dye.

We prepared network polysaccharide nanoscopic hydrogels by crosslinking water-soluble chitosan (WSCS) with a carboxylate-terminated maltooligosaccharide crosslinker via condensation. In this study, the enzymatic elongation of amylose chains on chitosan-based network polysaccharides by glucan phosphorylase (GP) catalysis was performed to obtain assembly materials. Maltoheptaose (Glc7) primers for GP-catalyzed enzymatic polymerization were first introduced into WSCS by reductive amination. Crosslinking of the product with the above-mentioned crosslinker by condensation was then performed to produce Glc7-modified network polysaccharides. The GP-catalyzed enzymatic polymerization of the α-d-glucose 1-phosphate monomer from the Glc7 primers on the network polysaccharides was conducted, where the elongated amylose chains formed double helices. Enzymatic disintegration of the resulting network polysaccharide assembly successfully occurred by α-amylase-catalyzed hydrolysis of the double helical amyloses. The encapsulation and release of a fluorescent dye, Rhodamine B, using the CS-based network polysaccharides were also achieved by means of the above two enzymatic approaches.

Influences of superfine-grinding and enzymolysis separately assisted with carboxymethylation and acetylation on the in vitro hypoglycemic and antioxidant activities of oil palm kernel expeller fibre.

The synergistic effects of ultrafine grinding and enzymolysis (cellulase and Laccase hydrolysis) alone or combined with carboxymethylation or acetylation on the hypoglycemic and antioxidant activities of oil palm kernel fibre (OPKEF) were studied for the first time. After these synergistic modifications, the microstructure of OPKEF became more porous, and its soluble fibre and total polyphenols contents, and surface area were all improved (P < 0.05). Superfine-grinding and enzymolysis combined with carboxymethylation treated OPKEF exhibited the highest viscosity (13.9 mPa∙s), inhibition ability to glucose diffusion (38.18%), and water-expansion volume (3.58 mL∙g-1). OPKEF treated with superfine-grinding and enzymolysis combined with acetylation showed the highest surface hydrophobicity (50.93) and glucose adsorption capacity (4.53 µmol∙g-1), but a lower α-amylase-inhibition ability. Moreover, OPKEF modified by superfine-grinding and enzymolysis had the highest inhibiting activity against α-amylase (25.78%). Additionally, superfine-grinding and enzymolysis combined with carboxymethylation or acetylation both improved the content and antioxidant activity of OPEKF's bounding polyphenols (P < 0.05).

Site-Directed Mutagenesis: Improving the Acid Resistance and Thermostability of Bacillus velezensis α-Amylase and Its Preliminary Feed Application.

The current study aimed to improve the acid resistance and thermostability of Bacillus velezensis α-amylase through site-directed mutagenesis, with a specific focus on its applicability to the feed industry. Four mutation sites, P546E, H572D, A614E, and K622E, were designed in the C domain of α-amylase, and three mutants, Mut1 (E), Mut2 (ED), and Mut3 (EDEE), were produced. The results showed that the specific activity of Mut3 was 50 U/mg higher than the original α-amylase (Ori) after incubation at 40 °C for 4 h. Compared to Ori, the acid resistance of Mut3 showed a twofold increase in specific activity at pH 2.0. Moreover, the results of preliminary feed hydrolysis were compared between Ori and Mut3 by designing three factors, three levels of orthogonal experiment for enzymatic hydrolysis time, feed quantity, and amount of amylase. It was observed that the enzymatic hydrolysis time and feed quantity showed an extremely significant difference (p < 0.01) in Mut3 compared to Ori. However, the amount of enzyme showed significant (p < 0.05) improvement in the enzymatic hydrolysis in Mut3 as compared to Ori. The study identified Mut3 as a promising candidate for the application of α-amylase in the feed industry.

Enhancing the anti-thixotropic properties of waxy maize starch modified by different α-amylases and its underlying molecular mechanism.

The large thixotropy of the starch-thickened foods is often unfavorable in many applications. This study examined the contribution of the proportion of amylopectin chain length to time-dependence of starch gels. The α-amylase (AM) from Bacillus stearothermophilus and maltogenic α-amylase (MA) from Bacillus subtilis were used to trim amylopectin in different reaction patterns. HPLC, HPAEC and IBC data suggested AM attacked B-chains (DP 12-36), causing an increment in number of the chains with DP 6-12, whereas MA primarily trimmed the short B-chains (DP 12-18) and partial A-chains (DP 9-12) to generate short chains with DP 6-9. Interestingly, the recovery of AM-gels was faster than MA-gels at the same degree of hydrolysis when subjected to shear according to the linear correlation analysis. When releasing the same mass of sugar, shortening of the long internal chains played an important role in reducing time dependence of starch gel rather than the external side chains. Possible models were proposed to illustrate the differences in the mechanism of rapid-recovery caused by different side-chain distributions. The outcome provided a new perspective to regulate the thixotropy behavior of starch through enzyme strategies in the granular state.

Novel molecular hybrids of EGCG and quinoxaline: Potent multi-targeting antidiabetic agents that inhibit α-glucosidase, α-amylase, and oxidative stress.

Diabetes mellitus is a multifactorial disease and its effective therapy often demands several drugs with different modes of action. Herein, we report a rational design and synthesis of multi-targeting novel molecular hybrids comprised of EGCG and quinoxaline derivatives that can effectively inhibit α-glucosidase, α-amylase as well as control oxidative stress by scavenging ROS. The hybrids showed superior inhibition of α-glucosidase along with similar α-amylase inhibition as compared to standard drug, acarbose. Most potent compound, 15c showed an IC50 of 0.50 µM (IC50 of acarbose 190 µM) against α-glucosidase. Kinetics studies with 15c revealed a competitive inhibition against α-glucosidase. Binding affinity of 15c (-9.5 kcal/mol) towards α-glucosidase was significantly higher than acarbose (-7.7 kcal/mol). 15c exhibited remarkably high antioxidant activity (IC50 = 18.84 µM), much better than vitamin C (IC50 = 33.04 µM). Of note, acarbose shows no antioxidant activity. Furthermore, α-amylase activity was effectively inhibited by 15c with an IC50 value of 16.35 µM. No cytotoxicity was observed for 15c (up to 40 µM) in MCF-7 cells. Taken together, we report a series of multi-targeting molecular hybrids capable of inhibiting carbohydrate hydrolysing enzymes as well as reducing oxidative stress, thus representing an advancement towards effective and novel therapeutic approaches for diabetes.

Raw starch degrading alkaline α-amylase from Geobacillus kaustophilus TSCCA02: Production, characterization, and its potential for application as a detergent additive.

Geobacillus kaustophilus TSCCA02, a newly isolated strain from cassava (Manihot esculenta L.) rhizosphere soil in Thailand, showed maximum raw starch degrading enzyme (RSDE) activity at 252.3 ± 9.32 U/mL with cassava starch and peptone at 5.0 and 3.0 g/L, respectively. 16 S ribosomal RNA (rRNA) sequencing and phylogenetic tree analyses indicated that the TSCCA02 strain was closely related to G. kaustophilus. The crude RSDE had optimal activity at 60°C and pH 9.0. This enzyme degraded various kinds of starch including potato starch, cassava starch, rice flour, corn starch, glutinous rice flour, and wheat flour to produce sugar syrup at 60°C, as confirmed by scanning electron microscopy (SEM), thin-layer chromatography (TLC), and Fourier-transform infrared spectroscopy (FTIR). The major end products of starch hydrolysis were maltose and maltotriose with a small amount of glucose, confirming this enzyme as an α-amylase. The enzyme improved the washing efficiency of cotton fabric with commercial detergent. Results indicated the potential of alkaline α-amylase produced from a new isolate of G. kaustophilus TSCCA02 for application as a detergent additive on an industrial scale.

Inhibition of α-amylase digestion by a Lonicera caerulea berry polyphenol starch complex revealed via multi-spectroscopic and molecular dynamics analyses.

Polyphenol-starch complexes exhibit synergistic and beneficial effects on both polyphenols and resistant starches. This study evaluates the inhibitory effects and mechanisms of α-amylase on a Lonicera caerulea berry polyphenol-wheat starch (LPWS) complex following high hydrostatic pressure treatments of 400 MPa for 30 min and 600 MPa for 30 min. The IC50 values for α-amylase inhibition by the complex were 3.61 ± 0.10 mg/mL and 3.42 ± 0.08 mg/mL at a 10 % (w/w) polyphenol content. This interaction was further supported by Fourier-transform infrared spectroscopy and circular dichroism, which confirmed that the alpha helix component of the secondary structure of α-amylase was reduced due to the complex. Multifluorescence spectroscopy revealed that the complex induces changes in the microenvironment of fluorophores surrounding the α-amylase active site. Molecular dynamics simulations and molecular docking revealed that the active site of amylose within the complex becomes enveloped in polyphenol clusters. This wrapping effect reduced the hydrogen bonds between amylose and α-amylase, decreasing from 16 groups to just one group. In summary, the LPWS complex represents a low-digestible carbohydrate food source, thus laying the groundwork for the research and development of functional foods aimed at postprandial hypoglycemic effects.

Biochemical exploration of family GH119 reveals a single α-amylase specificity and confirms shared catalytic machinery with GH57 enzymes.

While hundreds of starch- and glycogen-degrading enzymes have been characterized experimentally in historical families such as GH13, GH14, GH15, GH57 and GH126 of the CAZy database (www.cazy.org), the α-amylase from Bacillus circulans is the only enzyme that has been characterized in family GH119. Since glycosidase families have been shown to often group enzymes with different substrates or products, a single characterized enzyme in a family is insufficient to extrapolate enzyme function based solely on sequence similarity. Here we report the rational exploration of family GH119 through the biochemical characterization of five GH119 members. All enzymes shared single α-amylase specificity but display distinct product profile. We also report the first kinetic constants in family GH119 and the first experimental validation of previously predicted catalytic residues in family GH119, confirming that families GH119 and GH57 can be grouped in the novel clan GH-T of the CAZy database.

A starch-binding domain of α-amylase (AmyPG) disrupts the structure of raw starch.

Most raw starch-digesting enzymes possess at least one non-catalytic starch-binding domain (SBD), which enhances enzymatic hydrolysis of insoluble starch granules. Previous studies of SBD-starch interaction mainly focus on binding affinity for substrates, while the mechanism involved disruption of starch granules remains partially understood. Raw starch-digesting α-amylases AmyPG and AmyP were from Photobacterium gaetbulicola and an uncultured marine bacterium, respectively. Here, comparative studies on the two α-amylases and their SBDs (SBDPG and SBDAmyP) with high sequence identity were carried out. The degradation capacity of AmyPG towards raw starch was approximately 2-fold higher than that of AmyP, which was due to the stronger disruptive ability of SBDPG rather than the binding ability. Two non-binding amino acids (K626, T618) of SBDPG that specifically support the disruptive ability were first identified using affinity gel electrophoresis, amylose­iodine absorbance spectra, and differential scanning calorimetry. The mutants SBDPG-K626A and SBDPG-T618A exhibited stronger disruptive ability, while the corresponding mutants of AmyPG enhanced the final hydrolysis degree of raw starch. The results confirmed that the disruptive ability of SBD can independently affect raw starch hydrolysis. This advancement in the functional characterization of SBDs contributes to a better understanding of enzyme-starch granule interactions, pushing forward designs of raw starch-digesting enzymes.

Assessment of the Anti-Breast Cancer Effects of Urolithin with Molecular Docking Studies in the In Vitro Condition: Introducing a Novel Chemotherapeutic Drug.

A lot of research has been done on using natural items as diabetes treatment. The molecular docking study was conducted to evaluate the inhibitory activities of urolithin A against α-amylase, α-glucosidase, and aldose reductase. The molecular docking calculations indicated the probable interactions and the characteristics of these contacts at an atomic level. The results of the docking calculations showed the docking score of urolithin A against α-amylase was -5.169 kcal/mol. This value for α-glucosidase and aldose reductase was -3.657 kcal/mol and -7.635 kcal/mol, respectively. In general, the outcomes of the docking calculations revealed that urolithin A can construct several hydrogen bonds and hydrophobic contacts with the assessed enzymes and reduces their activities considerably. The properties of urolithin against common human breast cancer cell lines, i.e., SkBr3, MDA-MB-231, MCF-7, Hs578T, Evsa-T, BT-549, AU565 and 600MPE were evaluated. The IC50 of the urolithin was 400, 443, 392, 418, 397, 530, 566 and 551 against SkBr3, MDA-MB-231, MCF-7, Hs578T, Evsa-T, BT-549, AU565 and 600MPE, respectively. After doing the clinical trial studies, the recent molecule may be used as an anti-breast cancer supplement in humans. IC50 values of urolithin A on α-amylase, α-glucosidase, and aldose reductase enzymes were obtained at 16.14, 1.06 and 98.73 µM, respectively.

Purification and biochemical characterization of α- amylase from Aspergillus tamarii MTCC5152.

The purification and biochemical characterization of the extracellular alpha amylase from A.tamarii MTCC5152 were studied. The combined use of ion exchange and gel filtration chromatographic methods were used for purification studies. The specific activity was significantly increased (33 fold) and 19.41 fold purification of the enzyme α-amylase with 24% yield was achieved. The enzyme had an optimal pH of 6.5 and exhibited its highest activity at 55 °C. It is active over a wide range of pH 5-7 at room temperature. The enzyme is relatively stable in the temperature range of 25-35 °C for a period of 4 h hence, more suitable for industrial applications. Km and Vmax value of the enzyme was to be 5.882 mg/mL and 0.803 mg/mL/min respectively using starch as the substrate. The purified protein showed a single band on native and SDS PAGE and the molecular weight was found to be 31 kDa. Starch zymogram also revealed one clear zone of amylolytic activity which corresponded to the band obtained with native PAGE and SDS/PAGE. The characterization studies showed that the enzyme activity is inhibited by Ca2+, Mn2+, Hg2+, Fe2+.

Structural engineering and truncation of α-amylase from the hyperthermophilic archaeon Methanocaldococcus jannaschii.

Alpha amylases catalyse the hydrolysis of α-1, 4-glycosidic bonds in starch, yielding glucose, maltose, dextrin, and short oligosaccharides, vital to various industrial processes. Structural and functional insights on α-amylase from Methanocaldococcus jannaschii were computationally explored to evaluate a catalytic domain and its fusion with a small ubiquitin-like modifier (SUMO). The recombinant proteins' production, characterization, ligand binding studies, and structural analysis of the cloned amylase native full gene (MjAFG), catalytic domain (MjAD) and fusion enzymes (S-MjAD) were thoroughly analysed in this comparative study. The MjAD and S-MjAD showed 2-fold and 2.5-fold higher specific activities (µmol min-1 mg -1) than MjAFG at 95 °C at pH 6.0. Molecular modelling and MD simulation results showed that the removal of the extra loop (178 residues) at the C-terminal of the catalytic domain exposed the binding and catalytic residues near its active site, which was buried in the MjAFG enzyme. The temperature ramping and secondary structure analysis of MjAFG, MjAD and S-MjAD through CD spectrometry showed no notable alterations in the secondary structures but verified the correct folding of MjA variants. The chimeric fusion of amylases with thermostable α-glucosidases makes it a potential candidate for the starch degrading processes.

Finding structural requirements of structurally diverse α-glucosidase and α-amylase inhibitors through validated and predictive 2D-QSAR and 3D-QSAR analyses.

Diabetes mellitus (DM) is a chronic metabolic disorder characterized by hyperglycemic state. The α-glucosidase and α-amylase are considered two major targets for the management of Type 2 DM due to their ability of metabolizing carbohydrates into simpler sugars. In the current study, cheminformatics analyses were performed to develop validated and predictive models with a dataset of 187 α-glucosidase and α-amylase dual inhibitors. Separate linear, interpretable and statistically robust 2D-QSAR models were constructed with datasets containing the activities of α-glucosidase and α-amylase inhibitors with an aim to explain the crucial structural and physicochemical attributes responsible for higher activity towards these targets. Consequently, some descriptors of the models pointed out the importance of specific structural moieties responsible for the higher activities for these targets and on the other hand, properties such as ionization potential and mass of the compounds as well as number of hydrogen bond donors in molecules were found to be crucial in determining the binding potentials of the dataset compounds. Statistically significant 3D-QSAR models were developed with both α-glucosidase and α-amylase inhibition datapoints to estimate the importance of 3D electrostatic and steric fields for improved potentials towards these two targets. Molecular docking performed with selected compounds with homology model of α-glucosidase and X-ray crystal structure of α-amylase largely supported the interpretations obtained from the cheminformatic analyses. The current investigation should serve as important guidelines for the design of future α-glucosidase and α-amylase inhibitors. Besides, the current investigation is entirely performed by using non-commercial open-access tools to ensure easy accessibility and reproducibility of the investigation which may help researchers throughout the world to work more on drug design and discovery.

Enhanced Thermostability of Geobacillus stearothermophilus α-Amylase by Rational Design of Disulfide Bond and Application in Corn Starch Liquefaction and Bread Quality Improvement.

α-Amylase (EC 3.2.1.1) from Geobacillus stearothermophilus (generally recognized as safe) exhibited thermal inactivation, hampering its further application in starch-based industries. To address this, we performed structural analyses based on molecular dynamics targeting the flexible regions of α-amylase. Subsequently, we rationally designed a thermostable mutant, AmyS1, by introducing disulfide bonds to stabilize the flexible regions. AmyS1 showed excellent thermostability without any stability-activity trade-off, giving a 40-fold longer T1/2 (1359 min) at 90 °C. Thermostability mechanism analysis revealed that the introduction of disulfide bonds in AmyS1 refined weak spots and reconfigured the protein's force network. Moreover, AmyS1 exhibited improved pH compatibility and enhanced corn starch liquefaction at 100 °C with a 5.1-fold increased product concentration. Baking tests confirmed that AmyS1 enhanced bread quality and extended the shelf life. Therefore, mutant AmyS1 is a robust candidate for the starch-based industry.

Challenges and prospects of microbial α-amylases for industrial application: a review.

α-Amylases are essential biocatalysts representing a billion-dollar market with significant long-term global demand. They have varied applications ranging from detergent, textile, and food sectors such as bakery to, more recently, biofuel industries. Microbial α-amylases have distinct advantages over their plant and animal counterparts owing to generally good activities and better stability at temperature and pH extremes. With the scope of applications expanding, the need for new and improved α-amylases is ever-growing. However, scaling up microbial α-amylase technology from the laboratory to industry for practical applications is impeded by several issues, ranging from mass transfer limitations, low enzyme yields, and energy-intensive product recovery that adds to high production costs. This review highlights the major challenges and prospects for the production of microbial α-amylases, considering the various avenues of industrial bioprocessing such as culture-independent approaches, nutrient optimization, bioreactor operations with design improvements, and product down-streaming approaches towards developing efficient α-amylases with high activity and recyclability. Since the sequence and structure of the enzyme play a crucial role in modulating its functional properties, we have also tried to analyze the structural composition of microbial α-amylase as a guide to its thermodynamic properties to identify the areas that can be targeted for enhancing the catalytic activity and thermostability of the enzyme through varied immobilization or selective enzyme engineering approaches. Also, the utilization of inexpensive and renewable substrates for enzyme production to isolate α-amylases with non-conventional applications has been briefly discussed.

Purification and characterization of amylases from three freshwater fish species providing new insight application as enzyme molecular markers for zymography.

Purification of amylases from digestive tracts of three freshwater fish species with Q-Sepharose Fast Flow and Sephacryl S-200 columns displayed two isoforms of amylases from Osteochilus hasselti (O1, O2) and three isoforms of those from both Hampala dispar (UB, H1, H2) and Puntioplites proctozystron (P1, P2, P3). The optimum pH values displayed at 7.0 and 8.0, while the optimum temperatures revealed at 40 and 50 °C. Almost isoenzyme activities were activated by NaCl and CaCl2, whereas EDTA and SDS strongly inhibited all enzymatic activities. Verification with an atomic absorption spectrophotometry exhibited the presence of Ca2+ ions in the range of 0.02-13.53 ppm per mg protein indicating that amylases are Ca2+ dependent. Molecular weight analysis revealed 12 to 147 kDa. The UB, O1, and H2 amylases with appropriate molecular masses of 64, 49, and 25 kDa validated with LC-MS/MS were selected. Three certain enzymes revealed high stability in a sample buffer after five cycles of freeze-thawing process upon storage at - 20 °C for 12 weeks. No protein degradation was observed on polyacrylamide gel, and the enzymes still displayed sharp and clear bands on zymograms. The result suggested that the purified fish amylases, which expressed high activities and stabilities, were potentially used as enzyme molecular weight markers for zymography.