Agroindustrial Wastes as a Support for the Immobilization of Lipase from Thermomyces lanuginosus: Synthesis of Hexyl Laurate.

As a consequence of intense industrialization in the last few decades, the amount of agro-industrial wastes has increasing, where new forms of valorization are crucial. In this work, five residual biomasses from Maranhão (Brazil) were investigated as supports for immobilization of lipase from Thermomyces lanuginosus (TLL). The new biocatalysts BM-TLL (babaçu mesocarp) and RH-TLL (rice husk) showed immobilization efficiencies >98% and hydrolytic activities of 5.331 U g-1 and 4.608 U g-1, respectively, against 142 U g-1 by Lipozyme® TL IM. High esterification activities were also found, with 141.4 U g-1 and 396.4 U g-1 from BM-TLL and RH-TLL, respectively, against 113.5 U g-1 by TL IM. Results of porosimetry, SEM, and BET demonstrated BM and RH supports are mesoporous materials with large hydrophobic area, allowing a mixture of hydrophobic adsorption and confinement, resulting in hyperactivation of TLL. These biocatalysts were applied in the production of hexyl laurate, where RH-TLL was able to generate 94% conversion in 4 h. Desorption with Triton X-100 and NaCl confirmed that new biocatalysts were more efficient with 5 times less protein than commercial TL IM. All results demonstrated that residual biomass was able to produce robust and stable biocatalysts containing immobilized TLL with better results than commercial preparations.

Physicochemical and functional properties of native and modified agave fructans by acylation.

Native agave fructans were modified by an acylation reaction with lauric acid. Native and modified fructans were characterized using NMR, FTIR and various physicochemical and functional properties at different pHs were evaluated. NMR and FTIR spectra demonstrated the incorporation of lauric acid in the molecular structure of fructans. Modified agave fructans exhibited a color, moisture and water activity similar to native fructans, but properties such as solubility, swelling capacity, emulsifying activity and foam capacity were significantly modified by the acylation reaction mainly when the samples were analyzed at different pHs. The thermogram of the acylated fructans evidenced significant changes in thermal properties when compared with native fructans and acylated fructans were able to form micellar aggregates. In general, modified fructans showed improved functional properties in comparison with native fructans representing an important opportunity to improve the functionality of the foods in which it is incorporated.

Design, synthesis and valued properties of surfactin oversimplified analogues.

Surfactins are important lipopeptides produced by Bacillus subtilis that present strong surface activity. These biosurfactants find applications in various fields, from environmental remediation to medicine. The use of surfactins in remediation is hampered by production costs; the medical applications are also reframed because of the hemolytic activity of the cyclic peptide. To reduce costs and working time, the present work focused on the design, chemical synthesis and characterization of simple linear variants of surfactins having only L-amino acids and lauric acid at the N-terminal. Carboxyl-free and amidated analogues with negative, null and positive net charges at physiological pH were successfully obtained. The synthetic isoforms of surfactins showed high surface activity and ability to inhibit both growth and adhesion of Streptococcus mutans cells. Therefore, these properties make these low-cost synthetic peptides relevant and promising new compounds for science, industry and, mainly, dental care.

A Fatty Acids Mixture Reduces Anxiety-Like Behaviors in Infant Rats Mediated by GABAA Receptors.

Fatty acids (C6-C18) found in human amniotic fluid, colostrum, and maternal milk reduce behavioral indicators of experimental anxiety in adult Wistar rats. Unknown, however, is whether the anxiolytic-like effects of fatty acids provide a natural mechanism against anxiety in young offspring. The present study assessed the anxiolytic-like effect of a mixture of lauric acid, myristic acid, palmitic acid, palmitoleic acid, stearic acid, oleic acid, elaidic acid, and linoleic acid in Wistar rats on postnatal day 28. Infant rats were subjected to the elevated plus maze, defensive burying test, and locomotor activity test. Diazepam was used as a reference anxiolytic drug. A group that was pretreated with picrotoxin was used to explore the participation of γ-aminobutyric acid-A (GABAA) receptors in the anxiolytic-like effects. Similar to diazepam, the fatty acid mixture significantly increased the frequency of entries into and time spent on the open arms of the elevated plus maze and decreased burying behavior in the defensive burying test, without producing significant changes in spontaneous locomotor activity. These anxiolytic-like effects were blocked by picrotoxin. Results suggest that these fatty acids that are contained in maternal fluid may reduce anxiety-like behavior by modulating GABAergic neurotransmission in infant 28-day-old rats.

Self-association of sodium deoxycholate with EHEC cellulose cooperatively induced by sodium dodecanoate.

Some aspects of ethyl (hydroxyethyl) cellulose (EHEC) aqueous behavior in the presence of ionic surfactants are described in the literature; however, most of the studies reported address moderately concentrated solutions. Few studies have been carried out in the dilute regime using mixtures of biosurfactants. The main purpose of this work is to investigate the interaction of EHEC in the dilute regime and to verify the mixture of two surfactants: sodium deoxycholate (NaDC) and sodium dodecanoate (SDoD). The parameters of the surfactant to polymer association processes such as the critical aggregation concentration (cac) and saturation of the polymer by surfactants (psp) were determined from the plots of surface tension and specific conductivity versus surfactant concentration in basic conditions. The cmc of NaDC-SDoD mixtures showed non-ideal behavior. However, EHEC added to mixtures of SDoD and NaDC acts as a stabilizer for the mixed aggregate during the association process.

Acid activated montmorillonite as catalysts in methyl esterification reactions of lauric acid.

The catalytic activity of acid activated montmorillonite in the esterification of free fatty acids (FFA) is reported. Standard Montmorillonite (MMT) type STx-1 provided by the Clay Mineral Society repository was activated using phosphoric, nitric and sulphuric acids under different conditions and the resulting materials were characterized and evaluated as catalysts in the methyl esterification of lauric acid. Blank reactions carried out in the absence of any added catalyst presented conversions of 32.64, 69.79 and 79.23%, for alcohol:lauric acid molar ratios of 60:1, 12:1 and 6:1, respectively. In the presence of the untreated clay and using molar ratios of 12:1 and 6:1 with 12% of catalyst, conversions of 70.92 and 82.30% were obtained, respectively. For the acid activated clays, conversions up to 93.08% of lauric acid to methyl laurate were obtained, much higher than those observed for the thermal conversion or using untreated montmorillonite. Relative good correlations were observed between the catalytic activity and the development of acid sites and textural properties of the resulting materials. Therefore, a simple acid activation was able to improve the catalytic activity and produce clay catalysts that are environmental friendly, cost effective, noncorrosive and reusable.

The solid-liquid phase diagrams of binary mixtures of consecutive, even saturated fatty acids.

For the first time, the solid-liquid phase diagrams of five binary mixtures of saturated fatty acids are here presented. These mixtures are formed of caprylic acid (C(8:0))+capric acid (C(10:0)), capric acid (C(10:0))+lauric acid (C(12:0)), lauric acid (C(12:0))+myristic acid (C(14:0)), myristic acid (C(14:0))+palmitic acid (C(16:0)) and palmitic acid (C(16:0))+stearic acid (C(18:0)). The information used in these phase diagrams was obtained by differential scanning calorimetry (DSC), X-ray diffraction (XRD), FT-Raman spectrometry and polarized light microscopy, aiming at a complete understanding of the phase diagrams of the fatty acid mixtures. All of the phase diagrams reported here presented the same global behavior and it was shown that this was far more complex than previously imagined. They presented not only peritectic and eutectic reactions, but also metatectic reactions, due to solid-solid phase transitions common in fatty acids and regions of solid solution not previously reported. This work contributes to the elucidation of the phase behavior of these important biochemical molecules, with implications in various industrial applications.

Enzymatic synthesis of monolaurin.

The aim of this study was to produce monolaurin utilizing a commercial immobilized lipase (Lipozyme IM-20; Novo Nordisk, Bagsvaerd, Denmark) through the direct esterification of lauric acid and glycerol in a solvent-free system. The influence of fatty acid/glycerol molar ratio, temperature, and Lipozyme (IM-20) concentration on the molar fraction of monolaurin were determined using an experimental design. The best conditions employed were 55 degrees C, lauric acid/glycerol molar ratio of 1.0, and 3.0% (w/w) enzyme concentration. The final product, obtained after 6 h of reaction, was 45.5% monolaurin, 26.8% dilaurin, 3.1% trilaurin, and 24.6% lauric acid. The reusability of the enzyme was also studied.

Lipase-catalyzed synthesis of monoacylglycerol in a homogeneous system.

The 1,3-regiospecifique lipase, Lipozyme IM, catalyzed the esterification of lauric acid and glycerol in a homogeneous system. To overcome the drawback of the insolubility of glycerol in hexane, which is extensively used in enzymatic synthesis, a mixture of n-hexane/tert-butanol (1:1, v/v) was used leading to a monophasic system. The conversion of lauric acid into monolaurin was 65% in 8 h, when a molar ratio of glycerol to fatty acid (5:1) was used with the fatty acid at 0.1 M, and the phenomenon of acyl migration was minimized.

Raman spectroscopy in magnetic fluids.

In this work Raman spectroscopy was used to investigate uncoated magnetic fluids (UMF's) and coated magnetic fluids (CMF's). The coating agents were N-oleoylsarcosine, dodecanoic acid, and ethoxylated polyalcohol. The Raman probe is the hydroxyl (OH) group chemisorbed at the magnetic nanoparticle surface and the measurements were performed in the typical OH bending and OH stretching regions. The room temperature Raman data obtained from the UMF's and CMF's are compared to each other and with the data obtained from liquid water. Suppression of Raman modes from the MF's are discussed in terms of symmetry reduction and in terms of the interaction between the chemisorbed OH-group and the surrounding medium. The relative grafting coefficient associated to different coatings are estimated from the Raman data. The highest grafting coefficient is achieved with a single coating of dodecanoic acid in the hydrocarbon-based MF. The surface-grafting coefficient of the N-oleoylsarcosine-coated MF reduces when the polar liquid carrier replaces the non-polar liquid carrier. In comparison to liquid water, it was found that the hydrogen bonding between the chemisorbed OH-group and the solvent was enhanced in UMF's and reduced in CMF's.