Enhancing Hybrid Photovoltaic-Thermal System Efficiency with Boron Dipyrromethene Dyes.

A library of boron dipyrromethene (BODIPY) compounds was studied to assess their efficacy as components of a working liquid in hybrid photovoltaic-thermal (PVT) systems. Two series of BODIPY dyes were investigated: series I included alkylBODIPYs with varying substitution patterns, while series II included 1,3,5,7-tetramethyl-substituted BODIPYs featuring electron-rich aromatic groups in the meso position, such as naphthalene, anthracene, and carbazole. Series II dyes were designed to exhibit luminescence downshifting due to enhanced UV absorption (300-400 nm) and excited-state energy transfer, leading to visible-region fluorescence under UV excitation. Samples of PVT liquids based on decalin and containing each individual BODIPY dye were tested on a standard a-Si solar cell to evaluate their impact on solar energy conversion efficiency. The thermal behavior of the working liquid and the cell during the illumination cycle was monitored, alongside the cell's electrical characteristics. Energy conversion pathways and the overall effects of the dyes on the system performance were scrutinized. Results indicated that all BODIPY dyes enhanced both the electrical conversion efficiency (up to 2.41% increase) and thermal energy generation (up to 6.87%) compared to the solvent alone. These findings highlight the potential of BODIPY dyes to significantly improve the performance of PVT systems.

Investigation of factors that may affect the foveal avascular zone: An optical coherence tomography angiography study.

SIGNIFICANCE: An understanding of factors that affect the foveal avascular zone (FAZ) in healthy eyes may aid in the early identification of patients at risk of retinal pathology, thereby allowing better management and preventive measures to be implemented. PURPOSE: The size and shape of the FAZ can change due to retinal diseases associated with oxidative stress, including diabetic retinopathy, glaucoma, and macular degeneration. This study aimed to assess the relationship, if any, between factors that may affect the superficial FAZ (i.e., vessel density, vessel perfusion, overweight/obesity) and possible links with macular pigment optical density in young, healthy participants. METHODS: One hundred thirty-nine participants aged 18 to 35 years were recruited to this cross-sectional study. The superficial FAZ area, foveal vascularity, and central macular thickness (CMT) were assessed using the Cirrus 5000. Health parameters, body mass index, trunk fat %, and macular pigment were analyzed to determine possible associations with the superficial FAZ. RESULTS: Mean FAZ area was 0.23 ± 0.08 mm2. Females had a significantly larger mean FAZ area than males (p=0.002). The FAZ area was positively correlated with body mass index (Pearson's r = 0.189, p=0.026). Significant correlates of the FAZ area in the multivariate model included vessel perfusion (central), CMT, and trunk fat %, collectively explaining 65.1% of the overall variability. CONCLUSIONS: Study findings suggest that reduced vessel perfusion, thinner CMT, and higher trunk fat % are plausible predictors of a larger FAZ area in healthy Caucasian adults. Low macular pigment optical density was, however, not associated with increased FAZ size in young healthy eyes. Noninvasive optical coherence tomography angiography testing, in association with these predictors, may aid in the early detection and monitoring of retinal diseases associated with oxidative stress.

The Development of Optomechanical Sensors-Integrating Diffractive Optical Structures for Enhanced Sensitivity.

The term optomechanical sensors describes devices based on coupling the optical and mechanical sensing principles. The presence of a target analyte leads to a mechanical change, which, in turn, determines an alteration in the light propagation. Having higher sensitivity in comparison with the individual technologies upon which they are based, the optomechanical devices are used in biosensing, humidity, temperature, and gases detection. This perspective focuses on a particular class, namely on devices based on diffractive optical structures (DOS). Many configurations have been developed, including cantilever- and MEMS-type devices, fiber Bragg grating sensors, and cavity optomechanical sensing devices. These state-of-the-art sensors operate on the principle of a mechanical transducer coupled with a diffractive element resulting in a variation in the intensity or wavelength of the diffracted light in the presence of the target analyte. Therefore, as DOS can further enhance the sensitivity and selectivity, we present the individual mechanical and optical transducing methods and demonstrate how the DOS introduction can lead to an enhanced sensitivity and selectivity. Their (low-) cost manufacturing and their integration in new sensing platforms with great adaptability across many sensing areas are discussed, being foreseen that their implementation on wider application areas will further increase.

Cantilever-Based Sensor Utilizing a Diffractive Optical Element with High Sensitivity to Relative Humidity.

High-sensitivity and simple, low-cost readout are desirable features for sensors independent of the application area. Micro-cantilever sensors use the deflection induced by the analyte presence to achieve high-sensitivity but possess complex electronic readouts. Current holographic sensors probe the analyte presence by measuring changes in their optical properties, have a simpler low-cost readout, but their sensitivity can be further improved. Here, the two working principles were combined to obtain a new hybrid sensor with enhanced sensitivity. The diffractive element, a holographically patterned thin photopolymer layer, was placed on a polymer (polydimethylsiloxane) layer forming a bi-layer macro-cantilever. The different responses of the layers to analyte presence lead to cantilever deflection. The sensitivity and detection limits were evaluated by measuring the variation in cantilever deflection and diffraction efficiency with relative humidity. It was observed that the sensitivity is tunable by controlling the spatial frequency of the photopolymer gratings and the cantilever thickness. The sensor deflection was also visible to the naked eye, making it a simple, user-friendly device. The hybrid sensor diffraction efficiency response to the target analyte had an increased sensitivity (10-fold when compared with the cantilever or holographic modes operating independently), requiring a minimum upturn in the readout complexity.

Nanofluid Development Using Silver Nanoparticles and Organic-Luminescent Molecules for Solar-Thermal and Hybrid Photovoltaic-Thermal Applications.

Exploiting solar energy using photo-thermal (PT) and/or hybridised photovoltaic/thermal (PVT) systems can represent a viable alternative to the growing demand for renewable energy. For large-scale implementation, such systems require thermal fluids able to enhance the combined conversion efficiency achievable by controlling the 'thermal' and 'electrical' components of the solar spectrum. Nanofluids are typically employed for these purposes and they should exhibit high heat-transfer capabilities and optical properties tuned towards the peak performance spectral window of the photovoltaic (PV) component. In this work, novel nanofluids, composed of highly luminescent organic molecules and Ag nanoparticles dispersed within a base fluid, were tested for PT and PVT applications. These nanofluids were designed to mimic the behaviour of luminescent down-shifting molecules while offering enhanced thermo-physical characteristics over the host base fluid. The nanofluids' conversion efficiency was evaluated under a standard AM1.5G weighted solar spectrum. The results revealed that the Ag nanoparticles' inclusion in the composite fluid has the potential to improve the total solar energy conversion. The nanoparticles' presence minimizes the losses in the electrical power component of the PVT systems as the thermal conversion increases. The enhanced performances recorded suggest that these nanofluids could represent suitable candidates for solar energy conversion applications.

Silicon Microcantilever Sensors to Detect the Reversible Conformational Change of a Molecular Switch, Spiropyan.

The high sensitivity of silicon microcantilever sensors has expanded their use in areas ranging from gas sensing to bio-medical applications. Photochromic molecules also represent promising candidates for a large variety of sensing applications. In this work, the operating principles of these two sensing methods are combined in order to detect the reversible conformational change of a molecular switch, spiropyran. Thus, arrays of silicon microcantilever sensors were functionalized with spiropyran on the gold covered side and used as test microcantilevers. The microcantilever deflection response was observed, in five sequential cycles, as the transition from the spiropyran (SP) (CLOSED) to the merocyanine (MC) (OPEN) state and vice-versa when induced by UV and white light LED sources, respectively, proving the reversibility capabilities of this type of sensor. The microcantilever deflection direction was observed to be in one direction when changing to the MC state and in the opposite direction when changing back to the SP state. A tensile stress was induced in the microcantilever when the SP to MC transition took place, while a compressive stress was observed for the reverse transition. These different type of stresses are believed to be related to the spatial conformational changes induced in the photochromic molecule upon photo-isomerisation.

Stability of ultrathin nanocomposite polymer films controlled by the embedding of gold nanoparticles.

Thin and ultrathin polymer films combined with nanoparticles (NPs) are of significant interest as they are used in a host of industrial applications. In this paper we describe the stability of such films (hpoly ≤ 30 nm) to dewetting, specifically, how the development of a spinodal instability in a composite NP-polymer layer is controlled by the embedding of Au NPs. At working temperatures (T = 170 °C) above the polymer glass transition temperature (Tg ≈ 100 °C) the absence of Au NPs leads to film rupture by nucleation dewetting, while their presence over a large surface area enhances the development of a spinodal instability without destroying the film continuity. When the NPs embed, the surface undulations are suppressed. The dynamics change from an unstable to a stable state, and the thin composite NP-polymer layer returns to a flat configuration, while the wavelength of the pattern remains constant. Moreover, we demonstrate from a thermodynamic perspective that NPs will remain on the surface or embed in the polymer film depending on their free energy, which is determined by the NP interactions with the underlying polymer, the native SiOx layer, and the Si substrate.

Fractal patterning of nanoparticles on polymer films and their SERS capabilities.

We demonstrate control, via electro-hydrodynamic (EHD) induced polymer instabilities and nanoparticle mobility, of hierarchical fractal arrangements of gold nanoparticles on patterned thin polymer films. The induced changes in the film curvature enhance fractal formation for high and not for low mobility nanoparticles. The high mobility nanoparticles cluster in circular fractal networks on the rims of a hexagonally ordered array of EHD-induced polymer peaks. These arrangements exhibit plasmonic properties for surface-enhanced Raman scattering (SERS) spectroscopy.

Effect of Au nanoparticle spatial distribution on the stability of thin polymer films.

The stability of thin poly(methyl-methacrylate) (PMMA) films of low molecular weight on a solid substrate is controlled by the areal coverage of gold nanoparticles (NPs) present at the air-polymer interface. As the polymer becomes liquid the Au NPs are free to diffuse, coalesce, and aggregate while the polymer film can change its morphology through viscous flow. These processes lead at the same time to the formation of a fractal network of Au NPs and to the development of spinodal instabilities of the free surface of the polymer films. For thinner films a single wavelength is observed, while for thicker films two wavelengths compete. With continued heating the aggregation process results in a decrease in coverage, the networks evolve into disordered particle assemblies, while the polymer films flatten again. The disordering occurs first on the smallest scales and coincides (in thicker films) with the disappearance of the smaller wavelength. The subsequent disordering on larger scales causes the films to flatten.

Laser-heated emissive plasma probe.

Emissive probes are standard tools in laboratory plasmas for the direct determination of the plasma potential. Usually they consist of a loop of refractory wire heated by an electric current until sufficient electron emission. Recently emissive probes were used also for measuring the radial fluctuation-induced particle flux and other essential parameters of edge turbulence in magnetized toroidal hot plasmas [R. Schrittwieser et al., Plasma Phys. Controlled Fusion 50, 055004 (2008)]. We have developed and investigated various types of emissive probes, which were heated by a focused infrared laser beam. Such a probe has several advantages: higher probe temperature without evaporation or melting and thus higher emissivity and longer lifetime, no deformation of the probe in a magnetic field, no potential drop along the probe wire, and faster time response. The probes are heated by an infrared diode laser with 808 nm wavelength and an output power up to 50 W. One probe was mounted together with the lens system on a radially movable probe shaft, and radial profiles of the plasma potential and of its oscillations were measured in a linear helicon discharge.