The longevity of tooth-coloUred materials used for restoration of tooth wear: an evidence-based approach.

Patients with tooth wear are commonly encountered in general dental practice. When indicated, restorative rehabilitation is often accompanied by a request from the patient for an aesthetic, tooth-coloured outcome. This article seeks to provide an evidence-based approach, focussing on the longevity of the materials which can be used for the restorative treatment of tooth wear, as well as their modes of failure and observed performance.

The clinical performance of bulk-fill versus the incremental layered application of direct resin composite restorations: a systematic review.

OBJECTIVES: To systematically review the scientific evidence comparing the clinical effectiveness of bulk-fill versus incrementally layered conventional resin composites and to evaluate if one method offers clear merits with specific clinical outcomes. MATERIALS AND METHODS: Using relevant mesh terms and pre-established eligibility criteria in PubMed, Embase, Scopus and Web of Science, a thorough scientific search was conducted with an end-date of 30.04.2023. Randomized controlled clinical trials that involved the direct comparison of Class I and Class II resin composite restorations applied using incremental layering techniques versus bulk-filled in permanent teeth with an observation period of at least six months were considered. To evaluate the bias risk of the finalized records, a revised version of the Cochrane risk-of-bias tool for randomized trials was implemented. RESULTS: Out of the 1445 records determined, 18 eligible reports were chosen for qualitative analysis. Data obtained was categorized as per, the cavity design, the intervention, the comparator(s), the methods of success/failure assessment, the outcomes, and follow-up. Two studies demonstrated an overall low-risk of bias, fourteen studies raised some concerns, and two studies exhibited high-risk. CONCLUSION: Bulk filled resin composite restorations demonstrated clinical outcomes similar to those of incrementally layered resin composite restorations within a review interval of 6 months to 10 years.

A self-etch bonding system with potential to eliminate selective etching and resist proteolytic degradation.

OBJECTIVES: Bonded restorations using self-etch (SE) systems exhibit a limited lifespan due to their susceptibility to hydrolytic, enzymatic or fatigue degradation and poor performance on enamel. This study was conducted to develop and assess the performance of a two-step SE system using a functional monomer bis[2-(methacryloyloxy)ethyl]phosphate (BMEP) and demonstrate a strategy to enhance stability of bonded resin composite restorations to both enamel and dentine. METHODS: A two-step SE system was formulated with a primer containing BMEP, with an adhesive with or without BMEP, and compared to a commercial 10-MDP-containing system, ClearfilTM SE Bond 2 (CFSE). The systems were evaluated on enamel for surface roughness and microshear bond strength (µSBS) and on dentine for microtensile bond strength (µTBS), nanoleakage, MMP inhibition and cyclic flexural fatigue. RESULTS: Whilst all bonding systems resulted in statistically similar µSBS, BMEP-based primers yielded greater enamel surface roughness than the CFSE primer. The BMEP-free adhesives resulted in statistically similar or higher µTBS and lower nanoleakage compared to CFSE. In situ zymography revealed minimal to no MMP activity within the hybrid layer of BMEP-based systems. The BMEP-free adhesive exhibited flexural strength and fatigue resistance statistically similar to CFSE. CONCLUSIONS: Incorporation of BMEP in the primer led to satisfactory bond strengths with both enamel and dentine, potentially eliminating the need for selective enamel etching. Combined with an adhesive formulation that is solvent-free and hydrophobic, and confining the acidic functional monomer in the primer resulted in minimal interfacial leakage, and resistance to proteolytic degradation and the cyclic nature of chewing. CLINICAL SIGNIFICANCE: The SE bonding system containing BMEP combines the potent etching of phosphoric acid with the therapeutic function of the phosphate-based monomer in creating a homogenous hybrid layer with protection against endogenous proteolytic enzymes. This strategy may overcome current challenges that arise during selective enamel etching.

Evaluation of dental practitioner habits with occlusal assessment and the clinical application of practical techniques in occlusion, amongst a cohort of participants based in the UK, South Africa, Malta and Malaysia.

BACKGROUND: Currently, there is a lack of data relating to dental practitioners' habits with clinical occlusal assessment and the application of practical techniques in occlusion. OBJECTIVES: The aim of this study was to investigate habits with clinical occlusal assessment and the practical application of established concepts in occlusion amongst a cohort of international dentists. METHODS: A piloted questionnaire with 20 statements was distributed by 5 recruiters. The recruiters were based in Malta (1), South Africa (1), Malaysia (1) and the UK (2). Outcomes were analysed using descriptives, chi-squared and Fisher's exact test. All the analyses were carried out in Stata, Version 12. Significance was inferred at p < .05. RESULTS: Four hundred thirty-five completed responses were included in the sample (response rate, 70.7%). Overall, high levels of agreement were reported with the provision of single-unit crown and onlay restorations (78.8%) and bridge prostheses (up to 3 units, 77.9%), respectively. One-third (33.6%) agreed to observing dynamic occlusal relationships during an adult patient dental examination, 40.7% reported using articulators for crown and bridge cases, and 25.1% agreed to taking facebow records. Under half (47.3%) of the dentists expressed dissatisfaction with their undergraduate training in occlusion, with no significant association with the variables of the number of years of experience, the country of practice or being in general practice (p ≥ .226). CONCLUSION: The results indicate a disparity between traditionally taught and applied concepts in clinical occlusion and the undertaking of occlusal assessments and the management of occlusion in clinical practice.

A multi-functional dentine bonding system combining a phosphate monomer with eugenyl methacrylate.

OBJECTIVE: The tooth-resin composite interface is frequently associated with failure because of microbial contamination, hydrolytic and collagenolytic degradation. Thus, designing a dentine bonding system (DBS) with an intrinsically antimicrobial polymerisable monomer is of significance especially if it can be used with self-etching primers enabling resistance to degradation of the interface. METHODS: Experimental adhesives were developed incorporating eugenyl methacrylate (EgMA) at concentrations of 0,10 or 20 wt%, designated as EgMA0, EgMA10 and EgMA20, respectively, for use as a two-step self-etch DBS with the functional monomer bis[2-(methacryloyloxy) ethyl] phosphate (BMEP) in the primer. The curing, thermal and wettability properties of the adhesives were determined, and hybrid layer formation was characterised by confocal laser scanning microscopy, microtensile bond strengths (µTBS) and nanoleakage by back-scattered SEM. In situ zymography was used to assess MMP inhibitory activity of the BMEP-EgMA DBS. RESULTS: EgMA in the adhesives lowered the polymerisation exotherm and resulted in higher Tg, without negatively affecting degree of conversion. Water sorption and solubility were significantly lower with higher concentrations of EgMA in the adhesive. The formation of a distinct hybrid layer was evident from confocal images with the different adhesives, whilst EgMA20 yielded the highest µTBS post water storage challenges and lowest nanoleakage after 6 months. The experimental DBS exhibited minimal to no MMP activity at 3 months. SIGNIFICANCE: The hydrophobic nature of EgMA and high cross-link density exerts considerable benefits in lowering water uptake and polymerisation exotherm. The application of EgMA, adhesives in conjunction with BMEP in a multi-functional self-etching DBS can resist MMP activity, hence, enhance longevity of the dentine-resin composite interface.

Esthetic, mechanical, and biological outcomes of various implant abutments for single-tooth replacement in the anterior region: a systematic review of the literature.

BACKGROUND: The choice of the appropriate implant abutment is a critical step for a successful outcome. Titanium abutments have demonstrated high survival rates, due to their excellent biocompatibility and high mechanical strength, although they often result in a grayish discoloration of the peri-implant mucosa. This esthetic concern culminated in the introduction of ceramic abutments. The aim of this review was to assess the esthetic, mechanical, and biological outcomes as well as the survival of the different types of abutments used for single-implant restorations in the anterior area. MATERIAL AND METHODS: An electronic search was conducted in Medline, Embase, and Cochrane Central databases using the appropriate Mesh terms and predetermined eligibility criteria. The quality of the studies was assessed using the ROB 2 tool. The last search was conducted on 18th of March 2020. RESULTS: From the 2074 records initially identified, 23 randomized controlled trials (32 publications) were included for qualitative analysis. Data were classified based on study information, specific characteristics of the intervention and comparator, and information related to the outcome measures. Seven studies exhibited an overall low risk of bias, while twelve studies raised some concerns. CONCLUSIONS: The rate of abutment failure was low and was associated with the ceramic abutments, especially those with internal connection. Limited correlation was noted between soft tissue thickness and color difference. Titanium abutments caused significantly more discoloration to the soft tissues than ceramic abutments, while hueing (gold or pink) slightly improved their color performance. Zirconia allowed a better color match than titanium or gold abutments, still discolored slightly the soft tissues. The submucosally modified zirconia abutments exhibited encouraging results. No significant difference was reported between materials or different types of retention on recession, papillary fill, and biological outcomes.

The impact of e-training on tooth wear assessments using the BEWE.

OBJECTIVE: To investigate the impact of an e-training resource with the consistency of tooth wear scoring using the Basic Erosive Wear Examination (BEWE). METHODS: Gold standard (GS) BEWE scores were attained from a trained examiner using the photographic and dental cast records for three conveniently selected cases representing low, medium and severe tooth wear. Four successive cohorts of first year post-graduate students, (n = 76, mean age, 35.4 years) undertook a training exercise. Each was given written guidance on using the BEWE. Following e-training, scoring was repeated, and the results expressed as mean, confidence Intervals, (95% ci) and p-values (values <0.05 were considered statistically significant). RESULTS: The e-training resulted in a mean improvement in the agreement with the GS score by 15.6% and 15.3%, using the records of the medium and severe tooth wear cases, (cumulative BEWE scores of 13 and 15 respectively). Post-training reductions were reported, with the mean number of disagreements with the GS and the mean change in the size of disagreement with the GS scores with records for the medium and severe cases (p = 0.001 and p < 0.001). No significant difference was revealed for the low wear case. CONCLUSION: e-training resulted in significant improvements in scoring BEWE, compared to the gold standard. CLINICAL RELEVANCE: Online training resources can help provide training with the BEWE.

A study to investigate habits with tooth wear assessments among UK and non-UK dental practitioners.

Aim To assess the habits of tooth wear risk assessment and charting using a tooth wear index, by UK and non-UK dental practitioners.Design A questionnaire-based evaluation.Methods Three hundred and two completed questionnaires were returned and the outcomes analysed using descriptives, Chi-squared test and Fisher's exact test in SPSS. Significance was inferred at p <0.05.Results Based on a sample of 297 responses, 81% agreed to the need to undertake risk assessment for all dental patients attending for a first-time consultation. Fifty-nine percent undertook risk assessments for 'new patients' previously identified with signs of severe tooth wear. The routine use of a clinical index to perform tooth wear charting was described by 13.5%, with 5% documenting the frequent use of the BEWE tool. While specialist dental practitioners or those with further post-graduate training were more likely to use a tooth wear index (p <0.05), there were no other significant relationships between any of the variables in the sample and the practising habits assessed.Conclusion This investigation alludes to good levels of professional awareness of tooth wear. However, the need for improvement with the actual undertaking of risk assessments for tooth wear and consistency with tooth wear assessment and charting was determined. The need for appropriate professional guidance for the undertaking of tooth wear assessments is supported by the outcomes of this investigation.

Severe Tooth Wear: European Consensus Statement on Management Guidelines.

This paper presents European expert consensus guidelines on the management of severe tooth wear. It focuses on the definition of physiological vs pathological tooth wear and recommends diagnosis, prevention, counseling, and monitoring aimed at elucidating the etiology, nature, rate and means of controlling pathological tooth wear. Management decisions are multifactorial, depending principally on the severity and effects of the wear and the wishes of the patient. Restorative intervention is typically best delayed as long as possible. When such intervention is indicated and agreed upon with the patient, a conservative, minimally invasive approach is recommended, complemented by supportive preventive measures. Examples of adhesive, minimum-intervention management protocols are presented.

A Guided, Conservative Approach for the Management of Localized Mandibular Anterior Tooth Wear.

The successful management of the worn mandibular anterior dentition may present an awkward challenge to the dental operator. The purpose of this article is to describe a case report illustrating the use of a guided, three-dimensional protocol for the ultra-conservative and predictable restoration of the worn lower anterior dentition using direct resin composite. This technique utilizes information based on established biomechanical and occlusal principles to fabricate a diagnostic wax-up, which is duplicated in dental stone. This is used to prepare a vacuum-formed modified stent, assisting the clinician to place directly bonded resin composite restorations to restore the worn lower anterior dentition. The technique, described in 2012 and referred to as 'injection moulding' has the potential to offer optimal form, function and an aesthetic outcome in an efficient manner. CPD/Clinical Relevance: This article aims to describe an alternative technique to simplify the processes involved with restoration of worn lower anterior teeth.

Class II Resin Composites: Restorative Options.

Tooth-coloured, resin composite restorations are amongst the most frequently prescribed forms of dental restoration to manage defects in posterior teeth. The attainment of a desirable outcome when placing posterior resin composite restorations requires the clinician to have a good understanding of the benefits (as well as the limitations) posed by this material, together with a sound knowledge of placement technique. Numerous protocols and materials have evolved to assist the dental operator with this type of demanding posterior restoration. With the use of case examples, four techniques available are reported here. CPD/Clinical Relevance: This article explores varying techniques for the restoration of Class II cavities using resin composite.

Patient assessment: preparing for a predictable aesthetic outcome.

The flux of patients seeking to make changes to the appearance of their smile zone appears to be on a pathway of continual increase. This is possibly due to an increase in awareness towards oral health, and perhaps social, peer and media pressures, respectively. Cohorts of dental practitioners have thus responded to the latter demands by attending a plethora of educational courses, often focusing on either restorative techniques or other disciplines, notably orthodontics and clear aligners in particular. Consequently, treatment planning and thus treatment provision may carry the risk of being biased or indeed 'outcome driven' whereby the skills and knowledge of any clinician towards a particular faculty may significantly influence the ultimate treatment plan, with the unfortunate tendency sometimes to overlook the role of the interdisciplinary approach of concomitant restorative and contemporary techniques. The role of orthodontics to facilitate the provision of such treatment, along with predictable enamel bonding, has the distinct advantage of providing an acceptable aesthetic result with minimal biological intervention. However, to achieve an optimal result in such cases requires meticulous treatment planning and patient selection to avoid pitfalls with regards to long-term stability and function. This article suggests a standardized approach to patient assessment, with an interdisciplinary perspective in mind. Clinical Relevance: With the growth of patient demand for improving the appearance of the smile, a meticulous assessment protocol is required along with effective interdisciplinary communication. This enables a comprehensive treatment plan to be developed with the correct priorities.

Anterior tooth alignment--recommendations for stability.

UNLABELLED: This article considers the importance of current orthodontic practice in retention and stability when considering anterior tooth alignment. CLINICAL RELEVANCE: With the exponential increase of general dentist-based orthodontic systems for anterior tooth alignment, with considerably shorter treatment times, practical recommendations along with a current literature review are required to improve success and outcome of the long-term result.

Aesthetic resin onlay restorations: 'rationale and methods'.

UNLABELLED: Resin composite restorations have gained increasing popularity over the past two decades. This has been largely driven by a patient-orientated demand for the use of aesthetic restorative materials. It has occurred concomitantly with an improvement in the mechanical properties of available materials, and advances in our knowledge of resin bonding. Onlay restorations are advocated for a plethora of clinical applications. This paper considers the role of adhesive onlay restorations fabricated in resin composite in contemporary restorative practice, including the presentation of two case reports. CLINICAL RELEVANCE: This case report describes a minimally invasive, aesthetic solution to provide cuspal coverage by means of either a direct or indirect resin composite onlay restoration, respectively.

Aesthetic smile evaluation--a non-invasive solution.

UNLABELLED: Enhancement of the aesthetic zone is a common reason for patients to seek dental care. This article describes a protocol for the examination, assessment and treatment planning for a patient seeking a solution to an aesthetic concern. The technique of undertaking an intra-oral'mock-up' using resin composite as a diagnostic approach can be particularly helpful when planning for future prosthodontic rehabilitation. The latter can allow the operator and patient to visualize crudely what is aesthetically and functionally possible, given the constraints imposed by that patient. The patient has ultimately managed in a minimally invasive manner. CLINICAL RELEVANCE: It can be very tempting for a dental operator to impose his/her concepts of the'artistic ideal' when planning for care in the smile zone. Such ideals are largely based on established universal aesthetic principles of tooth colour, size, shape, form, position, symmetry and proportion. However, beauty is a very subjective matter. It is essential for the operator to listen attentively to his/her patient's concerns. Meticulous patient examination and assessment are absolutely critical factors in attempting to attain a successful outcome. The use of reversible, chairside intra-oral mock-up techniques can not only help with the transference of essential information to the dental technician when planning for restorative intervention in the smile zone, but can also allow the patient to gain an insight and indeed contribute his/her views to the possible restorative endpoint, respectively.

Aesthetic composite veneers for an adult patient with amelogenesis imperfecta: a case report.

UNLABELLED: This case has been presented as part of the continual assessment requirement for the MSc in Aesthetic Dentistry, King's College Dental Institute. Amelogenesis imperfecta (AI) is a hereditary disorder of enamel formation, affecting both the permanent and deciduous dentitions. It can be classified into hypoplastic, hypomaturation and hypocalcified types and presents with different hereditary patterns. The aim of this article is to provide an overview of amelogenesis imperfecta, including a detailed case report for an aesthetically concerned adult patient presenting in general practice with a Witkop's Type IA defect managed with the placement of direct, layered resin composite veneers. CLINICAL RELEVANCE: Amelogenesis imperfecta patients are susceptible to the restorative cycle of replacement restorations like any other patient, but start with a distinct disadvantage.This case report demonstrates a minimally invasive, relatively simple and cost-effective option for the aesthetic correction of a case of hypoplastic amelogenesis imperfecta with layered composite veneers. Dent Update 2011; 38:594-603