ABSTRACT
Highly transient boundary conditions affect mixing of dissolved solutes in groundwater. An example of these transient boundary conditions occurs at the surface water-groundwater interface, where the water level in rivers can change rapidly due to the operation of hydropower plants, leading to a regime known as hydropeaking. Inspired by this phenomenon, this work studies at laboratory scale the effects of fluctuating surface water bodies on solute transport in aquifers. We performed flow-through experiments at two different flow velocities and under steady and transient flow conditions where a conservative tracer was injected in the system and its concentration measured with optical imaging methods. The experimental results were quantitatively interpreted with numerical simulations implementing a non-linear velocity-dependent dispersive transport model. We estimated plume dilution by computing the dilution index and its evolution as well as two key geometrical metrics of the transient plumes: the perimeter and the area. We further investigated reactive mixing and mixing enhancement considering mixing-controlled bimolecular reactions using different critical mixing ratios. In general, highly transient boundary conditions lead to a larger area, perimeter and plume dilution and the results show greater relative enhancement for the scenarios with low groundwater flow velocity. A linear relationship was observed between the evolution of the area and the dilution index of the plumes for the transient flow scenarios investigated. Considering reactive transport and mixing-limited reactions at the surface water-groundwater interface, we identified different dilution and reaction dominated regimes, characterized, respectively, by increasing and decreasing plume entropies at different mixing ratios of the reactants. Furthermore, reactive mixing was enhanced by transient flows leading to a faster degradation of contaminant plumes compared to corresponding steady flow conditions.
Subject(s)
Groundwater , Water Pollutants, Chemical , Water Pollutants, Chemical/analysis , Water , Porosity , Water Movements , Models, TheoreticalABSTRACT
Transport processes in porous media are controlled by the characteristics of the flow field which are determined by the porous material properties and the boundary conditions of the system. This work provides experimental evidence of the relation between mixing and flow field topology in porous media at the continuum scale. The setup consists of a homogeneously packed quasi-two-dimensional flow-through chamber in which transient flow conditions, dynamically controlled by two external reservoirs, impact the transport of a dissolved tracer. The experiments were performed at two different flow velocities, corresponding to Péclet numbers of 191 and 565, respectively. The model-based interpretation of the experimental results shows that high values of the effective Okubo-Weiss parameter, driven by the changes of the boundary conditions, lead to high rates of increase of the Shannon entropy of the tracer distribution and, thus, to enhanced mixing. The comparison between a hydrodynamic dispersion model and an equivalent pore diffusion model demonstrates that despite the spatial and temporal variability in the hydrodynamic dispersion coefficients, the Shannon entropy remains almost unchanged because it is controlled by the Okubo-Weiss parameter. Overall, our work demonstrates that under highly transient boundary conditions, mixing dynamics in homogeneous porous media can also display complex patterns and is controlled by the flow topology.
ABSTRACT
Remote Sensing, as a driver for water management decisions, needs further integration with monitoring water quality programs, especially in developing countries. Moreover, usage of remote sensing approaches has not been broadly applied in monitoring routines. Therefore, it is necessary to assess the efficacy of available sensors to complement the often limited field measurements from such programs and build models that support monitoring tasks. Here, we integrate field measurements (2013-2019) from the Mexican national water quality monitoring system (RNMCA) with data from Landsat-8 OLI, Sentinel-3 OLCI, and Sentinel-2 MSI to train an extreme learning machine (ELM), a support vector regression (SVR) and a linear regression (LR) for estimating Chlorophyll-a (Chl-a), Turbidity, Total Suspended Matter (TSM) and Secchi Disk Depth (SDD). Additionally, OLCI Level-2 Products for Chl-a and TSM are compared against the RNMCA data. We observed that OLCI Level-2 Products are poorly correlated with the RNMCA data and it is not feasible to rely only on them to support monitoring operations. However, OLCI atmospherically corrected data is useful to develop accurate models using an ELM, particularly for Turbidity (R2 = 0.7). We conclude that remote sensing is useful to support monitoring systems tasks, and its progressive integration will improve the quality of water quality monitoring programs.