Characterization of the Edge States in Colloidal Bi2Se3 Platelets.

The remarkable development of colloidal nanocrystals with controlled dimensions and surface chemistry has resulted in vast optoelectronic applications. But can they also form a platform for quantum materials, in which electronic coherence is key? Here, we use colloidal, two-dimensional Bi2Se3 crystals, with precise and uniform thickness and finite lateral dimensions in the 100 nm range, to study the evolution of a topological insulator from three to two dimensions. For a thickness of 4-6 quintuple layers, scanning tunneling spectroscopy shows an 8 nm wide, nonscattering state encircling the platelet. We discuss the nature of this edge state with a low-energy continuum model and ab initio GW-Tight Binding theory. Our results also provide an indication of the maximum density of such states on a device.

Achievements of DFT for the investigation of graphene-related nanostructures.

CONSPECTUS: Graphene-related nanostructures stand out as exceptional materials due to both their wide range of properties and their expanse of interest in both applied and fundamental research. They are good examples of nanoscale materials for which the properties do not necessarily replicate those of the bulk. For the description and the understanding of their properties, it is clear that a general quantum-mechanical approach is mandatory. The remarkable result of density functional theory (DFT) is that the quantum-mechanical description of materials at the ground state is made amenable to simulations at a relatively low computational cost. The knowledge of materials has undergone a revolution after the introduction of DFT as an unrivaled instrument for the investigation of materials properties through computer experiments. Their deeper understanding comes from a variety of tools developed from concepts intrinsically present in DFT, notably the total energy and the charge density. Such tools allow the prediction of a diverse set of physicochemical properties relevant for material scientists. This Account lays out an example-driven tour through the achievements of ground-state DFT applied to the description of graphene-related nanostructures and to the deep understanding of their outstanding properties. After a brief introduction to DFT, the survey starts with the determination of the most basic properties that can be obtained from DFT, that is, band structures, lattice parameters, and spin ground state. Next follows an exploration of how total energies of different systems can give information about relative stability, formation energies, and reaction paths. Exploiting the derivatives of the energy with respect to displacements leads the way toward the extraction of vibrational and mechanical properties. In addition, a close examination of the charge density gives information about charge transfer mechanisms, which can be linked to chemical reactivity. The ground state density and Hamiltonian finally connect to the concepts behind transport phenomena, which drive much of the application-oriented research on graphene and graphene-related nanostructures. In each section, a selection of cases that are of current importance are used to illustrate the use and relevance of DFT-based techniques. In summary, this Account presents an introductory landscape of the possibilities of ground-state DFT for the study of graphene-related nanostructures. The prospect is rich, and the use of DFT for the study of graphene-related nanostructures will continue to be fruitful for the advancement of these and other materials.

Unconventional molecule-resolved current rectification in diamondoid-fullerene hybrids.

The unimolecular rectifier is a fundamental building block of molecular electronics. Rectification in single molecules can arise from electron transfer between molecular orbitals displaying asymmetric spatial charge distributions, akin to p-n junction diodes in semiconductors. Here we report a novel all-hydrocarbon molecular rectifier consisting of a diamantane-C60 conjugate. By linking both sp(3) (diamondoid) and sp(2) (fullerene) carbon allotropes, this hybrid molecule opposingly pairs negative and positive electron affinities. The single-molecule conductances of self-assembled domains on Au(111), probed by low-temperature scanning tunnelling microscopy and spectroscopy, reveal a large rectifying response of the molecular constructs. This specific electronic behaviour is postulated to originate from the electrostatic repulsion of diamantane-C60 molecules due to positively charged terminal hydrogen atoms on the diamondoid interacting with the top electrode (scanning tip) at various bias voltages. Density functional theory computations scrutinize the electronic and vibrational spectroscopic fingerprints of this unique molecular structure and corroborate the unconventional rectification mechanism.

Correlating atomic structure and transport in suspended graphene nanoribbons.

Graphene nanoribbons (GNRs) are promising candidates for next generation integrated circuit (IC) components; this fact motivates exploration of the relationship between crystallographic structure and transport of graphene patterned at IC-relevant length scales (<10 nm). We report on the controlled fabrication of pristine, freestanding GNRs with widths as small as 0.7 nm, paired with simultaneous lattice-resolution imaging and electrical transport characterization, all conducted within an aberration-corrected transmission electron microscope. Few-layer GNRs very frequently formed bonded-bilayers and were remarkably robust, sustaining currents in excess of 1.5 µA per carbon bond across a 5 atom-wide ribbon. We found that the intrinsic conductance of a sub-10 nm bonded bilayer GNR scaled with width as GBL(w) ≈ 3/4(e(2)/h)w, where w is the width in nanometers, while a monolayer GNR was roughly five times less conductive. Nanosculpted, crystalline monolayer GNRs exhibited armchair-terminated edges after current annealing, presenting a pathway for the controlled fabrication of semiconducting GNRs with known edge geometry. Finally, we report on simulations of quantum transport in GNRs that are in qualitative agreement with the observations.

Electrical transport measured in atomic carbon chains.

The first electrical-transport measurements of monatomic carbon chains are reported in this study. The chains were obtained by unraveling carbon atoms from graphene ribbons while an electrical current flowed through the ribbon and, successively, through the chain. The formation of the chains was accompanied by a characteristic drop in the electrical conductivity. The conductivity of the chains was much lower than previously predicted for ideal chains. First-principles calculations using both density functional and many-body perturbation theory show that strain in the chains has an increasing effect on the conductivity as the length of the chains increases. Indeed, carbon chains are always under varying nonzero strain that transforms their atomic structure from the cumulene to the polyyne configuration, thus inducing a tunable band gap. The modified electronic structure and the characteristics of the contact to the graphitic periphery explain the low conductivity of the locally constrained carbon chain.

Nitrogen-doped graphene: beyond single substitution and enhanced molecular sensing.

Graphene is a two-dimensional network in which sp(2)-hybridized carbon atoms are arranged in two different triangular sub-lattices (A and B). By incorporating nitrogen atoms into graphene, its physico-chemical properties could be significantly altered depending on the doping configuration within the sub-lattices. Here, we describe the synthesis of large-area, highly-crystalline monolayer N-doped graphene (NG) sheets via atmospheric-pressure chemical vapor deposition, yielding a unique N-doping site composed of two quasi-adjacent substitutional nitrogen atoms within the same graphene sub-lattice (N(2)(AA)). Scanning tunneling microscopy and spectroscopy (STM and STS) of NG revealed the presence of localized states in the conduction band induced by N(2)(AA)-doping, which was confirmed by ab initio calculations. Furthermore, we demonstrated for the first time that NG could be used to efficiently probe organic molecules via a highly improved graphene enhanced Raman scattering.

Quantum transport in graphene nanonetworks.

The quantum transport properties of graphene nanoribbon networks are investigated using first-principles calculations based on density functional theory. Focusing on systems that can be experimentally realized with existing techniques, both in-plane conductance in interconnected graphene nanoribbons and tunneling conductance in out-of-plane nanoribbon intersections were studied. The characteristics of the ab initio electronic transport through in-plane nanoribbon cross-points is found to be in agreement with results obtained with semiempirical approaches. Both simulations confirm the possibility of designing graphene nanoribbon-based networks capable of guiding electrons along desired and predetermined paths. In addition, some of these intersections exhibit different transmission probability for spin up and spin down electrons, suggesting the possible applications of such networks as spin filters. Furthermore, the electron transport properties of out-of-plane nanoribbon cross-points of realistic sizes are described using a combination of first-principles and tight-binding approaches. The stacking angle between individual sheets is found to play a central role in dictating the electronic transmission probability within the networks.

Millimeter-long carbon nanotubes: outstanding electron-emitting sources.

We are reporting the fabrication of a very efficient electron source using millimeter-long and highly crystalline carbon nanotubes. These devices start to emit electrons at fields as low as 0.17 V/µm and reach threshold emission at 0.24 V/µm. In addition, these electron sources are very stable and can achieve a peak current density of 750 mA cm(-2) at only 0.45 V/µm. In order to demonstrate intense electron beam generation, these devices were used to produce visible light by cathodoluminescence. Finally, density functional theory calculations were used to rationalize the measured electronic field emission properties in open carbon nanotubes of different lengths. The modeling establishes a clear correlation between length and field enhancement factor.

Longitudinal cutting of pure and doped carbon nanotubes to form graphitic nanoribbons using metal clusters as nanoscalpels.

We report the use of transition metal nanoparticles (Ni or Co) to longitudinally cut open multiwalled carbon nanotubes in order to create graphitic nanoribbons. The process consists of catalytic hydrogenation of carbon, in which the metal particles cut sp(2) hybridized carbon atoms along nanotubes that results in the liberation of hydrocarbon species. Observations reveal the presence of unzipped nanotubes that were cut by the nanoparticles. We also report the presence of partially open carbon nanotubes, which have been predicted to have novel magnetoresistance properties.(1) The nanoribbons produced are typically 15-40 nm wide and 100-500 nm long. This method offers an alternative approach for making graphene nanoribbons, compared to the chemical methods reported recently in the literature.

Spin polarized conductance in hybrid graphene nanoribbons using 5-7 defects.

We present a class of intramolecular graphene heterojunctions and use first-principles density functional calculations to describe their electronic, magnetic, and transport properties. The hybrid graphene and hybrid graphene nanoribbons have both armchair and zigzag features that are separated by an interface made up of pentagonal and heptagonal carbon rings. Contrary to conventional graphene sheets, the computed electronic density of states indicates that all hybrid graphene and nanoribbon systems are metallic. Hybrid nanoribbons are found to exhibit a remarkable width-dependent magnetic behavior and behave as spin polarized conductors.

Magnetic behavior in zinc oxide zigzag nanoribbons.

We use first principles calculations to investigate the magnetic properties of zinc oxide nanoribbons with zigzag-terminated edges. The polarized spin density of states is calculated as a function of the nanoribbons width and thickness. All nanoribbons formed by a single layer exhibit a magnetic behavior independently of the width. By analyzing the charge density and spin density, we determine that the oxygen-dominated edge exhibits unpaired spins. When the thickness of the ribbons is increased, a magnetic moment is observed only for specific thicknesses.