Using Capillary Electrophoresis to Investigate Protein Conformational and Compositional Heterogeneity.

Detailed insights into protein structure/function relationships require robust characterization methodologies. Free-solution capillary electrophoresis (CE) is a unique separation technique which is sensitive to the conformation and/or composition of proteins, and therefore provides information on the heterogeneity of these properties. Three unrelated, conformationally/compositionally-altered proteins were separated by CE. An electrophoretic mobility distribution was determined for each protein along with its conformational and/or compositional heterogeneity. The CE results were compared with molar mass distributions obtained from size-exclusion chromatography coupled to light scattering (SEC-MALS). Bovine serum albumin multimers and two monomeric species were separated, highlighting variations in conformational/compositional heterogeneity among the multimers. Analysis of yeast alcohol dehydrogenase resolved two monomeric conformers and various tetrameric species, illustrating the impact of zinc ion removal and disulfide bond reduction on the protein's heterogeneity. The apo (calcium-free) and holo forms of bovine α-lactalbumin were separated and differences in the species' heterogeneity were measured; by contrast, the SEC-MALS profiles were identical. Comparative analysis of these structurally unrelated proteins provided novel insights into the interplay between molar mass and conformational/compositional heterogeneity. Overall, this study expands the utility of CE by demonstrating its capacity to discern protein species and their heterogeneity, properties which are not readily accessible by other analytical techniques.

Assessing the quantification of acetylation in konjac glucomannan via ATR-FTIR and solid-state NMR spectroscopy.

Dietary fiber like konjac glucomannan (KGM) is important in maintaining good human health. There is no established method for quantifying the average degree of acetylation DA of this polysaccharide. Polysaccharides are notoriously difficult to dissolve. In this study, KGM could not be fully dissolved in common solvents and was characterized in the solid state. ATR-FTIR spectroscopy enabled a fast qualitative assessment of acetylation, selective to the outer layer of KGM particles, and identifying excipients like magnesium stearate. Average DA was quantified for the first time with solid-state 13C NMR in KGM: semi-quantitative measurements on the same arbitrary scale by cross polarization (1 to 2 days) were calibrated with a few longer single-pulse excitation measurements (approximately 1 week). DA values ranged from 4 to 8% of the hexoses in the backbone, in agreement with previously reported values. This method could be used for quality control and standardization of KGM products.

Engineering the Distinct Structure Interface of Subnano-alumina Domains on Silica for Acidic Amorphous Silica-Alumina toward Biorefining.

Amorphous silica-aluminas (ASAs) are important solid catalysts and supports for many industrially essential and sustainable processes, such as hydrocarbon transformation and biorefining. However, the wide distribution of acid strength on ASAs often results in undesired side reactions, lowering the product selectivity. Here we developed a strategy for the synthesis of a unique class of ASAs with unvarying strength of Brønsted acid sites (BAS) and Lewis acid sites (LAS) using double-flame-spray pyrolysis. Structural characterization using high-resolution transmission electron microscopy (TEM) and solid-state nuclear magnetic resonance (NMR) spectroscopy showed that the uniform acidity is due to a distinct nanostructure, characterized by a uniform interface of silica-alumina and homogeneously dispersed alumina domains. The BAS population density of as-prepared ASAs is up to 6 times higher than that obtained by classical methods. The BAS/LAS ratio, as well as the population densities of BAS and LAS of these ASAs, could be tuned in a broad range. In cyclohexanol dehydration, the uniform Brønsted acid strength provides a high selectivity to cyclohexene and a nearly linear correlation between acid site densities and cyclohexanol conversion. Moreover, the concerted action of these BAS and LAS leads to an excellent bifunctional Brønsted-Lewis acid catalyst for glucose dehydration, affording a superior 5-hydroxymethylfurfural yield.

Characterization of oligo(acrylic acid)s and their block co-oligomers.

Oligo(acrylic acid), oligoAA are important species currently used industrially in the stabilization of paints and also for the production of self-assembled polymer structures which have been shown to have useful applications in analytical separation methods and potentially in drug delivery systems. To properly tailor the synthesis of oligoAA, and its block co-oligomers synthesized by Reversible-Addition Fragmentation chain Transfer (RAFT) polymerization to applications, detailed knowledge about the chemical structure is needed. Commonly used techniques such as Size Exclusion Chromatography (SEC) and Electrospray Ionization-Mass Spectrometry (ESI-MS) suffer from poor resolution and non-quantitative distributions, respectively. In this work free solution Capillary Electrophoresis (CE) has been thoroughly investigated as an alternative, allowing for the separation of oligoAA by molar mass and the RAFT agent end group. The method was then extended to block co-oligomers of acrylic acid and styrene. Peak capacities up to 426 were observed for these 1D CE separations, 10 times greater than what has been achieved for Liquid Chromatography (LC) of oligostyrenes. To provide a comprehensive insight into the chemical structure of these materials 1H and 13C Nuclear Magnetic Resonance (NMR) spectroscopy was used to provide an accurate average chain length and reveal the presence of branching. The chain length at which branching is detected was investigated with the results showing a degree of branching of 1% of the monomer units in oligoAA with an average chain length of 9 monomer units, which was the shortest chain length at which branching could be detected. This branching is suspected to be a result of both intermolecular and intramolecular transfer reactions. The combination of free solution CE and NMR spectroscopy is shown to provide a near complete elucidation of the chemical structure of oligoAA including the average chain length and branching as well as the chain length and RAFT agent end group distribution. Furthermore, the purity in terms of the dead chains and unreacted RAFT agent was quantified. The use of free solution CE and 1H NMR spectroscopy demonstrated in this work can be routinely applied to oligoelectrolytes and their block co-oligomers to provide an accurate characterization which allows for better design of the materials produced from these oligomers.

Determination of the distributions of degrees of acetylation of chitosan.

Chitosan is often characterized by its average degree of acetylation. To increase chitosan's use in various industries, a more thorough characterization is necessary as the acetylation of chitosan affects properties such as dissolution and mechanical properties of chitosan films. Despite the poor solubility of chitosan, free solution capillary electrophoresis (CE) allows a robust separation of chitosan by the degree of acetylation. The distribution of degrees of acetylation of various chitosan samples was characterized through their distributions of electrophoretic mobilities. These distributions can be obtained easily and with high precision. The heterogeneity of the chitosan chains in terms of acetylation was characterized through the dispersity of the electrophoretic mobility distributions obtained. The relationship between the number-average degree of acetylation obtained by solid-state NMR spectroscopy and the weight-average electrophoretic mobilities was established. The distribution of degrees of acetylation was determined using capillary electrophoresis in the critical conditions (CE-CC).

Capillary Electrophoresis to Monitor Peptide Grafting onto Chitosan Films in Real Time.

Free-solution capillary electrophoresis (CE) separates analytes, generally charged compounds in solution through the application of an electric field. Compared to other analytical separation techniques, such as chromatography, CE is cheap, robust and effectively requires no sample preparation (for a number of complex natural matrices or polymeric samples). CE is fast and can be used to follow the evolution of mixtures in real time (e.g., chemical reaction kinetics), as the signals observed for the separated compounds are directly proportional to their quantity in solution. Here, the efficiency of CE is demonstrated for monitoring the covalent grafting of peptides onto chitosan films for subsequent biomedical applications. Chitosan's antimicrobial and biocompatible properties make it an attractive material for biomedical applications such as cell growth substrates. Covalently grafting the peptide RGDS (arginine - glycine - aspartic acid - serine) onto the surface of chitosan films aims at improving cell attachment. Historically, chromatography and amino acid analysis have been used to provide a direct measurement of the amount of grafted peptide. However, the fast separation and absence of sample preparation provided by CE enables equally accurate yet real-time monitoring of the peptide grafting process. CE is able to separate and quantify the different components of the reaction mixture: the (non-grafted) peptide and the chemical coupling agents. In this way the use of CE results in improved films for downstream applications. The chitosan films were characterized through solid-state NMR (nuclear magnetic resonance) spectroscopy. This technique is more time-consuming and cannot be applied in real time, but yields a direct measurement of the peptide and thus validates the CE technique.

Structural modifications of cellulose samples after dissolution into various solvent systems.

This work deals with the modifications resulting from the dissolution of four commercial cellulosic samples, with different crystallinity rates and degrees of polymerization (DPs), in four solvent systems, known and used to dissolve cellulose. The dissolution conditions were optimized for the 16 various systems and followed by turbidity measurements. After regeneration, the samples were analyzed by thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), and X-ray diffractometry (XRD) to study their modification. Viscosimetry measurements were used to evaluate the potential decrease of the DP after dissolution. The observed structural modifications established that, for low DP, all the solvent systems were efficient in dissolving the cellulose without altering the DP, except BMIM [Cl], which provoked a decrease of up to 40 % and a decrease of around 20 % of the degradation temperature (onset temperature, T o). For high molecular weight (MW) celluloses, DMSO/TBAF was the only system to allow a complete dissolution without any molar mass loss and degradation temperature modification.

Towards a less biased dissolution of chitosan.

The dissolution of polysaccharides is notoriously challenging, especially when one needs a "true" solution. Factors influencing chitosan's solubility include composition, also known as degree of acetylation (DA). The dissolution of chitosan was investigated by visual observation, size-exclusion chromatography (SEC), pressure mobilization (PM), free-solution capillary electrophoresis (CE) and real-time solution-state NMR spectroscopy. Aqueous HCl dissolves around 15% more chitosan than the commonly used aqueous acetic acid (AcOH), however aggregates were detected in SEC suggesting incomplete dissolution. Significant deacetylation of chitosan over the period needed for dissolution at high temperature was observed by NMR spectroscopy in DCl by about 20% of the initial DA value. Accurate DA determination by NMR spectroscopy may thus be possible only in the solid state (with a precision within 1% on the DA % scale above a DA of 10%). Overall a compromise between maximum solubilization and minimum degradation is required in attempting to obtain a "true" solution of chitosan. The completeness of the dissolution may be more influenced by the average DA than by molar mass.

Quantifying the Heterogeneity of Chemical Structures in Complex Charged Polymers through the Dispersity of Their Distributions of Electrophoretic Mobilities or of Compositions.

The complexity of synthetic and natural polymers used in industrial and medical applications is expanding; thus, it becomes increasingly important to improve and develop methods for their molecular characterization. Free-solution capillary electrophoresis is a robust technique for the separation and characterization of both natural and synthetic complex charged polymers. In the case of polyelectrolytes, free-solution capillary electrophoresis is in the "critical conditions" (CE-CC): it allows their separation by factors other than molar mass for molar masses typically higher than 20000 g/mol. This method is thus complementary to size-exclusion chromatography (SEC). SEC is widely used to determine molar mass distributions and their dispersities. Utilizing CE-CC, an analogous calculation of dispersity based on the distributions of electrophoretic mobilities was derived and the heterogeneity of composition or branching in different polysaccharides or synthetic polymers was obtained in a number of experimental cases. Calculations are based on a ratio of moments and could therefore be compared to simulations of polymerization processes, in analogy to the work performed on molar mass distributions. Among four possible types of dispersity, the most precise values were obtained with the calculation analogous with the dispersity of molar mass distribution Mw/Mn. In addition, the dispersity value allows conclusions based on a single value: the closer the dispersity is to 1, the more homogeneous the polymer is in terms of composition or branching. This approach allows the analysis of dispersity of important molecular attributes of polymers other than molar mass and aims at improving the overall molecular characterization of both synthetic and natural polymers. The dispersity can also be monitored online while performing a chemical reaction within the CE instrument.

Cellular Response to Linear and Branched Poly(acrylic acid).

Poly(acrylic acid-co-sodium acrylate) (PNaA) is a pH-responsive polymer with potential in anticancer drug delivery. The cytotoxicity and intracellular effects of 3-arm star, hyperbranched and linear PNaA were investigated with L1210 progenitor leukemia cells and L6 myoblast cells. Free solution capillary electrophoresis demonstrated interactions of PNaA with serum proteins. In a 72 h MTT assay most PNaAs exhibited a IC50 between 7 and 14 mmol L(-1), showing that precipitation may be a sufficient purification for PNaA dilute solutions. Dialyzed 3-arm star and hyperbranched PNaA caused an increase in L6 cell viability, challenging the suitability of MTT as cytotoxicity assay for PNaA. Fluorescent confocal microscopy revealed merging of cellular lipids after exposure to PNaA, likely caused by serum starvation.

Quantification of sugars in breakfast cereals using capillary electrophoresis.

About 80% of the Australian population consumes breakfast cereal (BC) at least five days a week. With high prevalence rates of obesity and other diet-related diseases, improved methods for monitoring sugar levels in breakfast cereals would be useful in nutrition research. The heterogeneity of the complex matrix of BCs can make carbohydrate analysis challenging or necessitate tedious sample preparation leading to potential sugar loss or starch degradation into sugars. A recently established, simple and robust free solution capillary electrophoresis (CE) method was used in a new application to 13 BCs (in Australia) and compared with several established methods for quantification of carbohydrates. Carbohydrates identified in BCs by CE included sucrose, maltose, glucose and fructose. The CE method is simple requiring no sample preparation or derivatization and carbohydrates are detected by direct UV detection. CE was shown to be a more robust and accurate method for measuring carbohydrates than Fehling method, DNS (3,5-dinitrosalicylic acid) assay and HPLC (high performance liquid chromatography).

Investigation of photochemical reactions of saccharides during direct ultraviolet absorbance detection in capillary electrophoresis.

Direct UV detection of saccharides in capillary electrophoresis is possible due to a base-catalyzed conversion into UV absorbing substances initiated by the light of the UV detector lamp. In the present study the compounds formed during this reaction were investigated with capillary electrophoresis using an additional UV lamp for online irradiation at a certain distance before the detector resulting in a separation of the conversion products. It was found that for all investigated saccharides (glucose, ribose and sucrose) the major portion of the UV absorption in direct UV detection resulted from one and the same substance. By CE-UV, CE-MS as well as HPLC-MS measurements this substance was demonstrated to be malondialdehyde, present as its conjugate base malonenolate under alkaline conditions. Additional experiments revealed that the conversion reaction is highly sensitive to the residence time under the UV light as malondialdehyde can further degrade into non-UV absorbing products. NMR measurements showed that under alkaline conditions this degradation proceeds slowly even without UV irradiation.

Real-time monitoring of peptide grafting onto chitosan films using capillary electrophoresis.

Chitosan, being antimicrobial and biocompatible, is attractive as a cell growth substrate. To improve cell attachment, arginine-glycine-aspartic acid-serine (RGDS) peptides were covalently grafted to chitosan films, through the widely used coupling agents 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC-HCl) and N-hydroxysuccinimide (NHS), via the carboxylic acid function of the RGDS molecule. The grafting reaction was monitored, for the first time, in real time using free-solution capillary electrophoresis (CE). This enabled fast separation and determination of the peptide and all other reactants in one separation with no sample preparation. Covalent RGDS peptide grafting onto the chitosan film surface was demonstrated using solid-state NMR of swollen films. CE indicated that oligomers of RGDS, not simply RGDS, were grafted on the film, with a likely hyperbranched structure. To assess the functional properties of the grafted films, cell growth was compared on control and peptide-grafted chitosan films. Light microscopy and polymerase chain reaction (PCR) analysis demonstrated greatly improved cell attachment to RGDS-grafted chitosan films.

Simple and robust monitoring of ethanol fermentations by capillary electrophoresis.

Free-solution capillary electrophoresis (CE), or capillary zone electrophoresis, with direct UV detection was used for the first time for the determination of mono- and disaccharides, sugar alcohols, and ethanol in fermentation broths. Sample preparation proved to be minimal: no derivatization or specific sample purification was needed. The CE conditions can be adapted to the type of fermentation by simply altering the background electrolyte (BGE). KOH (130 mM) or NaOH (130 mM) as the BGE led to the fastest analysis time when monitoring simple fermentations. A mixture of 65 mM NaOH and 65 mM LiOH led to a 19% improvement in resolution for a complex mixture of carbohydrates. Quantification of a simple carbohydrate fermentation by CE showed values in close agreement with that of high-performance anion exchange chromatography and high-performance liquid chromatography (HPLC) on a cation exchange resin. For complex fermentations, quantification of carbohydrates by HPLC and CE led to similar results, whereas CE requires an injection volume of only 10-20 nL. Analysis of an ethanol fermentation of hydrolyzed plant fiber demonstrated the robustness of the separation and detection of carbohydrates, as well as ethanol. Ethanol determination is achieved by coupling the CE method to pressure mobilization, using the same instrument and the same sample.

Purity of double hydrophilic block copolymers revealed by capillary electrophoresis in the critical conditions.

Block copolymers enable combining properties of different polymers; double hydrophilic block copolymers are innovative examples. Size-exclusion chromatography (SEC or GPC) has a quasi-monopoly in separation-based characterization methods for polymers, including block copolymers. However, in terms of purity determination (unintended homopolymers present in the copolymers), SEC resolution proves insufficient except for the extreme compositions for which the second block is much larger than the first one. The free solution capillary electrophoresis (capillary zone electrophoresis) technique does not separate charged homopolymers by their molar mass and we thus named the corresponding method capillary electrophoresis in the critical condition (CE-CC). CE-CC provides a means to assess the purity of poly(acrylic acid-b-acrylamide) - P(AA-b-AM) - copolymers, as well as of the more challenging cationic poly(acrylamido-N-propyltrimethylammonium chloride-b-N-isopropylacrylamide)-P(APTAC-b-NIPAM). In addition it can identify that a block copolymer has been produced. It is to be noted that P(APTAC-b-NIPAM) block copolymers cannot be eluted in SEC due to their exceptional ability to adsorb onto surfaces, while some information is obtained from CE-CC. Both possible parent homopolymers can be detected and their quantity estimated in a single injection by CE-CC. In both cases, one of the parent homopolymers is neutral and comes with the electro-osmotic flow. If the electro-osmotic flow is weak (conditions used for the cationic copolymer) then pressure assisted CE-CC is used to detect this homopolymer.

Ethanol determination using pressure mobilization and free solution capillary electrophoresis by photo-oxidation assisted ultraviolet detection.

Free solution capillary electrophoresis (CE) can separate and quantify carbohydrates using a simple direct UV detection based on a photo-oxidation reaction taking place in the detection window without any labeling. Ethanol interferes with this photo-oxidation reaction. We thus present the first detection and quantification of ethanol using either a simple pressure mobilization set-up or CE. Ethanol can be detected down to 34.9mgL(-1) and quantified in the range 117-1850mgL(-1) through the interference with photo-oxidization of 2gL(-1) sucrose. CE can thus separate and quantify both carbohydrates and ethanol, for example to monitor a lignocellulosic fermentation process. The method is not limited to ethanol and applies to alkyl amines and other alcohols and likely to most molecules possessing the ability to react with free radicals assuming they can be sufficiently separated from each other.

Understanding and improving direct UV detection of monosaccharides and disaccharides in free solution capillary electrophoresis.

Direct UV detection of carbohydrates in free solution capillary electrophoresis at 270 nm is made possible by a photo-oxidation reaction. Glucose, rhamnose and xylose were shown to have unique UV absorption spectra hypothesizing different UV absorbing intermediates for their respective photo-oxidation. NMR spectroscopy of the photo-oxidation end products proved they consisted of carboxylates and not malondialdehyde as previously theorized and that oxygen thus plays a key role in the photo-oxidation pathway. Adding the photo-initiator Irgacure(®) 2959 in the background electrolyte increased sensitivity by 40% at an optimum concentration of 1×10(-4) mM and 1×10(-8) mM for conventional 50 µm i.d. capillaries and for the corresponding extended light path capillaries, respectively.

Supramolecular organization of protonated aminosilicones in water.

This study deals with the ionically-driven self-assembly of oligomeric aminosilicones, judiciously protonated with a variety of organic acids. Depending on the length of the silicone and the strength of the associated acids, (inverse) water-in-silicone emulsions, small nanoparticles, or catanionic vesicles were prepared and characterized by conventional (TEM) or original (DIC optical microscopy, DOSY NMR) techniques. For chains longer than about 40 units, a specific PEG-based sulfonic acid was synthesized and used to generate a supramolecular block-like copolymer and ensure fast and efficient emulsification. In all instances, a simple impulse such as pH increase triggered phase separation of the colloidal objects.

Separation of poly(acrylic acid) salts according to topology using capillary electrophoresis in the critical conditions.

Branching was detected in polyacrylates synthesised through radical polymerization via solution-state NMR, while inconsistencies have been reported for the determination of the molar mass of hydrophilic polyacrylates using aqueous-phase and organic-phase size-exclusion chromatography. In this work, poly(sodium acrylate)s, PNaAs, of various topologies were separated for the first time using free-solution capillary electrophoresis (CE). Free-solution CE does not separate the PNaAs by their molar mass, similarly to separations by liquid chromatography in the critical conditions, rather by different topologies (linear, star branched, and hyperbranched). The electrophoretic mobility of PNaAs increases as the degree of branching decreases. Separation is shown to be not only by the topology but also by the end groups as expected for a separation in the critical conditions: replacing a relatively bulky nitroxide end group with hydrogen atom yielded a higher electrophoretic mobility. This novel method, capillary electrophoresis in the critical conditions enabled, for the first time, the separation of hydrophilic polyacrylates according to their topology (branching) and their chain ends. This will allow meaningful and accurate characterization of their branched topologies as well as molar masses and progress in for advanced applications such as drug delivery or flocculation.

Separation of chitosan by degree of acetylation using simple free solution capillary electrophoresis.

Chitosan is a biopolymer of increasing significance, as well as a renewable and sustainable material. Its main molecular characteristics are molar mass and degree of acetylation (composition). Precise average degrees of acetylation were measured by quantitative (1)H solution-state NMR spectroscopy. While number-average degrees of acetylation had already been determined by (1)H NMR spectroscopy, weight-average degrees of acetylation are also determined and may be more relevant for some properties, such as mechanical properties. We report the first separation of chitosan according to its degree of acetylation using free solution capillary electrophoresis. Capillary electrophoresis separates chitosan in the 'critical conditions': the molar mass plays little role and the separation is by the degree of acetylation. It characterises the heterogeneity of chitosan samples in terms of composition (dispersity of the distribution of degrees of acetylation). This heterogeneity (broad distribution of degrees of acetylation) cannot be neglected contrary to a common assumption found in the literature. This fast and easy separation will allow establishing a structure-property relationships.