High-Energy Earth-Abundant Cathodes with Enhanced Cationic/Anionic Redox for Sustainable and Long-Lasting Na-Ion Batteries.

Layered iron/manganese-based oxides are a class of promising cathode materials for sustainable batteries due to their high energy densities and earth abundance. However, the stabilization of cationic and anionic redox reactions in these cathodes during cycling at high voltage remain elusive. Here, an electrochemically/thermally stable P2-Na0.67Fe0.3Mn0.5Mg0.1Ti0.1O2 cathode material with zero critical elements is designed for sodium-ion batteries (NIBs) to realize a highly reversible capacity of ≈210 mAh g-1 at 20 mA g-1 and good cycling stability with a capacity retention of 74% after 300 cycles at 200 mA g-1, even when operated with a high charge cut-off voltage of 4.5 V versus sodium metal. Combining a suite of cutting-edge characterizations and computational modeling, it is shown that Mg/Ti co-doping leads to stabilized surface/bulk structure at high voltage and high temperature, and more importantly, enhances cationic/anionic redox reaction reversibility over extended cycles with the suppression of other undesired oxygen activities. This work fundamentally deepens the failure mechanism of Fe/Mn-based layered cathodes and highlights the importance of dopant engineering to achieve high-energy and earth-abundant cathode material for sustainable and long-lasting NIBs.

Critical Contribution of Imbalanced Charge Loss to Performance Deterioration of Si-Based Lithium-Ion Cells during Calendar Aging.

Increasing the energy density of lithium-ion batteries, and thereby reducing costs, is a major target for industry and academic research. One of the best opportunities is to replace the traditional graphite anode with a high-capacity anode material, such as silicon. However, Si-based lithium-ion batteries have been widely reported to suffer from a limited calendar life for automobile applications. Heretofore, there lacks a fundamental understanding of calendar aging for rationally developing mitigation strategies. Both open-circuit voltage and voltage-hold aging protocols were utilized to characterize the aging behavior of Si-based cells. Particularly, a high-precision leakage current measurement was applied to quantitatively measure the rate of parasitic reactions at the electrode/electrolyte interface. The rate of parasitic reactions at the Si anode was found 5 times and 15 times faster than those of LiNi0.8Mn0.1Co0.1O2 and LiFePO4 cathodes, respectively. The imbalanced charge loss from parasitic reactions plays a critical role in exacerbating performance deterioration. In addition, a linear relationship between capacity loss and charge consumption from parasitic reactions provides fundamental support to assess calendar life through voltage-hold tests. These new findings imply that longer calendar life can be achieved by suppressing parasitic reactions at the Si anode to balance charge consumption during calendar aging.

Investigating links between Internet literacy, Internet use, and Internet addiction among Chinese youth and adolescents in the digital age.

Introduction: In current digital era, adolescents' Internet use has increased exponentially, with the Internet playing a more and more important role in their education and entertainment. However, due to the ongoing cognitive, emotion, and social development processes, youth and adolescents are more vulnerable to Internet addiction. Attention has been paid to the increased use of Internet during the COVID-19 pandemic and the influence of Internet literacy in prevention and intervention of Internet addiction. Methods: The present study proposes a conceptual model to investigate the links between Internet literacy, Internet use of different purpose and duration, and Internet addiction among Chinese youth and adolescents. In this study, N = 2,276 adolescents studying in primary and secondary schools in East China were recruited, and they completed self-reports on sociodemographic characteristics, Internet literacy scale, Internet use, and Internet addiction scale. Results: The results showed a significant relationship between Internet use and Internet addiction. To be specific, the duration of Internet use significantly and positively affected Internet addiction. With different dimensions of Internet literacy required, entertainment-oriented Internet use had positive impact on Internet addiction, while education-oriented Internet use exerted negative effects on Internet addiction. As for Internet literacy, knowledge and skills for Internet (positively) and Internet self-management (negatively) significantly influenced the likelihood of Internet addiction. Discussion: The findings suggest that Internet overuse increases the risk of Internet addiction in youth and adolescents, while entertainment-oriented rather than education-oriented Internet use is addictive. The role of Internet literacy is complicated, with critical Internet literacy preventing the development of Internet addiction among youth and adolescents, while functional Internet literacy increasing the risk.

Whole-Voltage-Range Solid-Solution Reaction in Layered Oxide Cathode of Sodium-Ion Batteries.

Layered manganese-based oxides (LMOs) are promising cathode materials for sodium-ion batteries (SIBs) due to their versatile structures. However, the Jahn-Teller effect of Mn3+ induces severe distortion of MnO6 octahedra, and the resultant low symmetry is responsible for the gliding of MnO2 layers and then inferior multiple-phase transitions upon Na+ extraction/insertion. Here, hexagonal P2-Na0.643 Li0.078 Mn0.827 Ti0.095 O2 is synthesized through the incorporation of Li and Ti into the distorted orthorhombic P'2-Na0.67 MnO2 to function as a phase-transition-free oxide cathode. It is revealed that Li in both the transition-metal and Na layers enhances the covalency of Mn-O bonds and allows degeneracy of Mn 3d eg orbitals to favor the formation of hexagonal phase, and the high strength of Ti-O bonds reduces the electrostatic interaction between Na and O for suppressed Na+ /vacancy rearrangements. These collectively lead to a whole-voltage-range solid-solution reaction between 1.8 and 4.3 V with a small volume variation of 1.49%. This rewards its excellent cycling stability (capacity retention of 90% after 500 cycles) and rate capability (89 mAh g-1 at 2000 mA g-1 ).

IL-6 promotes pluripotency of mouse embryonic stem cells and regulates cardiac differentiation in a development-dependent manner.

Interleukin 6 (IL-6), an important component of cardiac microenvironment, favors cardiac repair by improving cardiomyocyte regeneration in different models. This study aimed to investigate the effects of IL-6 on stemness maintenances and cardiac differentiation of mouse embryonic stem cells (mESCs). The mESCs were treated with IL-6 for two days, and then subjected to CCK-8 essay for proliferation analysis and quantitative real-time PCR (qPCR) to evaluate the mRNA expression of genes related to stemness and germinal layers differentiation. Phosphorylation levels of stem cell-related signal pathways were detected by Western blot. siRNA was used to interfere the function of STAT3 phosphorylation. Cardiac differentiation was investigated by the percentage of beating embryoid bodies (EBs) and qPCR analysis of cardiac progenitor markers and cardiac ion channels. IL-6 neutralization antibody was applied to block the endogenous IL-6 effects since the onset of cardiac differentiation (embryonic day of 0, EB0). The EBs were collected on EB7, EB10 and EB15 to investigate the cardiac differentiation by qPCR. On EB15, Western blot was applied to investigate the phosphorylation of several signaling pathways, and immunochemistry staining was adopted to trace the cardiomyocytes. IL-6 antibody was administered for two days (short term) on EB4, EB7, EB10 or EB15, and percentages of beating EBs at late developmental stage were recorded. The results showed that exogenous IL-6 promoted mESCs proliferation and favored maintenances of pluripotency, evidenced by up-regulated mRNA expression of oncogenes (c-fos, c-jun) and stemness markers (oct4, nanog), down-regulated mRNA expression of germ layer genes (branchyury, FLK-1, pecam, ncam, sox17), and increased phosphorylation of ERK1/2 and STAT3. siRNA targeting JAK/STAT3 partially attenuated the effects of IL-6 on cell proliferation and mRNA expression of c-fos and c-jun. During differentiation, long term IL-6 neutralization antibody application decreased the percentage of beating EBs, down-regulated mRNA expression of ISL1, GATA4, α-MHC, cTnT, kir2.1, cav1.2, and declined the fluorescence intensity of cardiac α actinin in EBs and single cell. Long term IL-6 antibody treatment decreased the phosphorylation of STAT3. In addition, short term (2 d) IL-6 antibody treatment starting from EB4 significantly reduced the percentage of beating EBs in late development stage, while short term IL-6 antibody treatment starting from EB10 significantly increased the percentage of beating EBs on EB16. These results suggest that exogenous IL-6 promotes mESCs proliferation and favors stemness maintenance. Endogenous IL-6 regulates mESC cardiac differentiation in a development-dependent manner. These findings provide important basis for the study of microenvironment on cell replacement therapy, as well as a new perspective for understanding the pathophysiology of heart diseases.

[Effect of Mycobacterium tuberculosis higBA on Bacterial Stress Response and Intracellular Infection and Immunity].

Objective: To investigate the effect of Mycobacterium tuberculosis ( Mtb) higBA on bacterial stress response and intracellular infection and immunity. Methods: The target gene amplified from Mtb H37Rv genome was cloned to the vector and then transferred to Mycobacterium smegmatis ( Ms) to construct a recombinant strain. Stress response experiment and Raw264.7 mouse macrophage infection was carried out with Ms_higBA, the recombinant strain, and Ms_ vec, the vector strain. Tests were conducted to measure bacterial colony forming unit (CFU) and transcriptional levels of cytokines, including interleukin ( IL)-1ß, IL-6, IL-10, IL-12 p40, interferon ( IFN)- γ, tumor necrosis factor ( TNF)- α, and inducible nitric oxide synthase ( iNOS). Results: The recombinant strain, Ms_higBA, was constructed successfully. According to the findings of the stress response experiment, higBA could indeed enhance bacterial survival under certain conditions of in vitro culture. Intracellular infection experiment demonstrated that higBA enhanced bacterial survival in macrophages and influenced the transcriptional level of cytokines. Conclusion: The higBA genes from Mtb play a role in bacterial stress response and intracellular infection and immunity.

Chasing protons in lithium-ion batteries.

Parasitic reactions between delithiated cathode materials and non-aqueous electrolytes have been a major barrier that limits the upper cutoff potential of cathode materials. It is of great importance to suppress such parasitic reactions to unleash the high-energy-density potential of high voltage cathode materials. Although major effort has been made to identify the chemical composition of the cathode electrolyte interface using various cutting edge characterization tools, the chemical nature of parasitic reactions remains a puzzle. This severely hinders the rational development of stable high voltage cathode/electrolyte pairs for high-energy density lithium-ion batteries. This feature article highlights our latest effort in understanding the chemical/electrochemical role of the cathode electrolyte interface using protons as a chemical tracer for parasitic reactions.

Suppressing electrolyte-lithium metal reactivity via Li+-desolvation in uniform nano-porous separator.

Lithium reactivity with electrolytes leads to their continuous consumption and dendrite growth, which constitute major obstacles to harnessing the tremendous energy of lithium-metal anode in a reversible manner. Considerable attention has been focused on inhibiting dendrite via interface and electrolyte engineering, while admitting electrolyte-lithium metal reactivity as a thermodynamic inevitability. Here, we report the effective suppression of such reactivity through a nano-porous separator. Calculation assisted by diversified characterizations reveals that the separator partially desolvates Li+ in confinement created by its uniform nanopores, and deactivates solvents for electrochemical reduction before Li0-deposition occurs. The consequence of such deactivation is realizing dendrite-free lithium-metal electrode, which even retaining its metallic lustre after long-term cycling in both Li-symmetric cell and high-voltage Li-metal battery with LiNi0.6Mn0.2Co0.2O2 as cathode. The discovery that a nano-structured separator alters both bulk and interfacial behaviors of electrolytes points us toward a new direction to harness lithium-metal as the most promising anode.

Native lattice strain induced structural earthquake in sodium layered oxide cathodes.

High-voltage operation is essential for the energy and power densities of battery cathode materials, but its stabilization remains a universal challenge. To date, the degradation origin has been mostly attributed to cycling-initiated structural deformation while the effect of native crystallographic defects induced during the sophisticated synthesis process has been significantly overlooked. Here, using in situ synchrotron X-ray probes and advanced transmission electron microscopy to probe the solid-state synthesis and charge/discharge process of sodium layered oxide cathodes, we reveal that quenching-induced native lattice strain plays an overwhelming role in the catastrophic capacity degradation of sodium layered cathodes, which runs counter to conventional perception-phase transition and cathode interfacial reactions. We observe that the spontaneous relaxation of native lattice strain is responsible for the structural earthquake (e.g., dislocation, stacking faults and fragmentation) of sodium layered cathodes during cycling, which is unexpectedly not regulated by the voltage window but is strongly coupled with charge/discharge temperature and rate. Our findings resolve the controversial understanding on the degradation origin of cathode materials and highlight the importance of eliminating intrinsic crystallographic defects to guarantee superior cycling stability at high voltages.

Editorial for focus on nanophase materials for next-generation lithium-ion batteries and beyond.

Lithium-ion batteries (LIBs) have revolutionized our society in many respects, and we are expecting even more favorable changes in our lifestyles with newer battery technologies. In pursuing such eligible batteries, nanophase materials play some important roles in LIBs and beyond technologies. Stimulated by their beneficial effects of nanophase materials, we initiated this Focus. Excitingly, this Focus collects 13 excellent original research and review articles related to the applications of nanophase materials in various rechargeable batteries, ranging from nanostructured electrode materials, nanoscale interface tailoring, novel separators, computational calculations, and advanced characterizations.

Role of Lithium Doping in P2-Na0.67Ni0.33Mn0.67O2 for Sodium-Ion Batteries.

P2-structured Na0.67Ni0.33Mn0.67O2 (PNNMO) is a promising Na-ion battery cathode material, but its rapid capacity decay during cycling remains a hurdle. Li doping in layered transition-metal oxide (TMO) cathode materials is known to enhance their electrochemical properties. Nevertheless, the influence of Li at different locations in the structure has not been investigated. Here, the crystallographic role and electrochemical impact of lithium on different sites in PNNMO is investigated in Li x Na0.67-y Ni0.33Mn0.67O2+δ (0.00 ≤ x ≤ 0.2, y = 0, 0.1). Lithium occupancy on prismatic Na sites is promoted in Na-deficient (Na < 0.67) PNNMO, evidenced by ex situ and operando synchrotron X-ray diffraction, X-ray absorption spectroscopy, and 7Li solid-state nuclear magnetic resonance. Partial substitution of Na with Li leads to enhanced stability and slightly increased specific capacity compared to PNNMO. In contrast, when lithium is located primarily on octahedral TM sites, capacity is increased but at the cost of stability.

In situ observation of thermal-driven degradation and safety concerns of lithiated graphite anode.

Graphite, a robust host for reversible lithium storage, enabled the first commercially viable lithium-ion batteries. However, the thermal degradation pathway and the safety hazards of lithiated graphite remain elusive. Here, solid-electrolyte interphase (SEI) decomposition, lithium leaching, and gas release of the lithiated graphite anode during heating were examined by in situ synchrotron X-ray techniques and in situ mass spectroscopy. The source of flammable gas such as H2 was identified and quantitively analyzed. Also, the existence of highly reactive residual lithium on the graphite surface was identified at high temperatures. Our results emphasized the critical role of the SEI in anode thermal stability and uncovered the potential safety hazards of the flammable gases and leached lithium. The anode thermal degradation mechanism revealed in the present work will stimulate more efforts in the rational design of anodes to enable safe energy storage.

Improvement of the immunogenicity of ESAT-6 via fusion with the dodecameric protein dodecin of Mycobacterium tuberculosis.

Tuberculosis (TB) is a chronic infectious disease that creates a heavy medical burden worldwide. The only approved vaccine, Bacillus Calmette-Guérin (BCG), cannot fully protect adolescents and adults from TB. Therefore, there is an urgent need to develop an effective new vaccine. Previous studies have found that dodecin, a flavin-binding protein of Mycobacterium tuberculosis (Mtb), can form stable dodecamers and has the potential to improve the immunogenicity of Mtb antigens. In this study, we constructed the fusion protein dodecin-ESAT-6 and evaluated the immunogenicity of dodecin, ESAT-6, and dodecin-ESAT-6 separately. Our results showed that dodecin-ESAT-6 is a dodecameric protein that can withstand heat at 95 °C and under SDS-PAGE conditions. Dodecin-ESAT-6 increased the expression of the costimulatory molecules CD80, CD86, and major histocompatibility complex class II (MHC-II) on the surface of RAW264.7 macrophages. Mice immunized with dodecin-ESAT-6 exhibited higher percentages of antigen-specific CD4+ and CD8+ T lymphocytes, higher levels of spleen lymphocyte proliferation and IFN-γ and IL-2 secretion, and a lower level of IL-4 secretion than those immunized with ESAT-6. The IgG, IgG1, and IgG2a titers of the dodecin-ESAT-6 group were significantly higher than those of the ESAT-6 group. Dodecin-ESAT-6 elicited a high IgG2a/IgG1 ratio and tended to produce a predominantly Th1-like response. These results support the conclusion that the dodecin-ESAT-6 dodecameric protein induced strong Th1 immune responses and improved the immunogenicity of ESAT-6, which provides a new strategy for TB vaccine development.

Compensatory effects of M. tuberculosis rpoB mutations outside the rifampicin resistance-determining region.

Mycobacterium tuberculosis has been observed to develop resistance to the frontline anti-tuberculosis drug rifampicin, primarily through mutations in the rifampicin resistance-determining region (RRDR) of rpoB. While these mutations have been determined to confer a fitness cost, compensatory mutations in rpoA and rpoC that may enhance the fitness of resistant strains have been demonstrated. Recent genomic studies identified several rpoB non-RRDR mutations that co-occurred with RRDR mutations in clinical isolates without rpoA/rpoC mutations and may confer fitness compensation. In this study, we identified 33 evolutionarily convergent rpoB non-RRDR mutations through phylogenomic analysis of public genomic data for clinical M. tuberculosis isolates. We found that none of these mutations, except V170F and I491F, can cause rifampin resistance in Mycolicibacterium smegmatis. The compensatory effects of five representative mutations across rpoB were evaluated by an in vitro competition assay, through which we observed that each of these mutations can significantly improve the relative fitness of the initial S450L mutant (0.97-1.08 vs 0.87). Furthermore, we observed that the decreased RNAP transcription efficiency introduced by S450L was significantly alleviated by each of the five mutations. Structural analysis indicated that the fitness compensation observed for the non-RRDR mutations might be achieved by modification of the RpoB active centre or by changes in interactions between RNAP subunits. Our results provide experimental evidence supporting that compensatory effects are exerted by several rpoB non-RRDR mutations, which could be utilized as additional molecular markers for predicting the fitness of clinical rifampin-resistant M. tuberculosis strains.

Kinetic Limitations in Single-Crystal High-Nickel Cathodes.

High-nickel cathodes attract immense interest for use in lithium-ion batteries to boost Li-storage capacity while reducing cost. For overcoming the intergranular-cracking issue in polycrystals, single-crystals are considered an appealing alternative, but aggravating concerns on compromising the ionic transport and kinetic properties. We report here a quantitative assessment of redox reaction in single-crystal LiNi0.8 Mn0.1 Co0.1 O2 using operando hard X-ray microscopy/spectroscopy, revealing a strong dependence of redox kinetics on the state of charge (SOC). Specifically, the redox is sluggish at low SOC but increases rapidly as SOC increases, both in bulk electrodes and individual particles. The observation is corroborated by transport measurements and finite-element simulation, indicating that the sluggish kinetics in single-crystals is governed by ionic transport at low SOC and may be alleviated through synergistic interaction with polycrystals integrated into a same electrode.

Probing the Thermal-Driven Structural and Chemical Degradation of Ni-Rich Layered Cathodes by Co/Mn Exchange.

The intrinsic poor thermal stability of layered LiNixCoyMn1-x-yO2 (NCM) cathodes and the exothermic side reactions triggered by the associated oxygen release are the main safety threats for their large-scale implantation. In the NCM family, it is widely accepted that Ni is the stability troublemaker, while Mn has long been considered as a structure stabilizer, whereas the role of Co remains elusive. Here, via Co/Mn exchange in a Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode, we demonstrate that the chemical and structural stability of the deep delithiated NCM cathodes are significantly dominated by Co rather than the widely reported Mn. Operando synchrotron X-ray characterization coupling with in situ mass spectrometry reveal that the Co4+ reduces prior to the reduction of Ni4+ and could thus prolong the Ni migration by occupying the tetrahedra sites and, hence, postpone the oxygen release and thermal failure. In contrast, the Mn itself is stable, but barely stabilizes the Ni4+. Our results highlight the importance of evaluating the intrinsic role of compositional tuning on the Ni-rich/Co-free layered oxide cathode materials to guarantee the safe operation of high-energy Li-ion batteries.

Cardiac fibroblast paracrine factors modulate mouse embryonic stem cells.

The study aims to investigate the effects of cardiac fibroblast (CF) paracrine factors on murine embryonic stem cells (ESCs). Conditioned mediums from either neonatal cardiac fibroblasts (ConM-NCF) or adult cardiac fibroblasts (ConM-ACF) were diluted by 1:50 and 1:5, respectively, to investigate whether these conditioned mediums impact murine ESCs distinctly with RT-real time PCR techniques, cell proliferation essay, ELISA and by counting percentage of beating embryoid bodies (EBs) during ESCs differentiation. The data showed that the paracrine ability of CFs changed dramatically during development, in which interleukin 6 (IL6) increased with maturation. ConM-NCF 1:50 and ConM-NCF 1:5 had opposite effects on the pluripotent markers, although they both reduced mouse ESC proliferation. ConM-ACF 1:50 promoted ESCs pluripotent markers and proliferation, while ConM-ACF 1:5 exerted negative effects. All CF-derived conditioned mediums inhibited cardiac differentiation, but with distinguishable features: ConM-NCF 1:50 slightly decreased the early cardiac differentiation without altering the maturation tendency or cardiac specific markers in EBs at differentiation of day 17; ConM-ACF 1:50 had more significant inhibitory effects on early cardiac differentiation than ConM-NCF 1:50 and impeded cardiac maturation with upregulation of cardiac specific markers. In addition, IL6 neutralization antibody attenuated positive effect of ConM-ACF 1:50 on ESCs proliferation, but had no effects on ConM-NCF 1:50. Long-term IL6 neutralization reduced the percentage of beating EBs at early developmental stage, but did not alter the late cardiac differentiation. Taken together, both the quality and quantity of factors and cytokines secreted by CFs are critical for the ESC fate. IL6 could be a favorable cytokine for ESC pluripotency and the early cardiac differentiation.

[Preliminary Study on the Secretory Performance of Mycobacterium tuberculosis Hypoxic Response Protein 1 (Rv2626c)].

OBJECTIVE: To verify the secretory ability of the hypoxic response protein 1 (HRP1) encoded by Mycobacterium tuberculosis (Mtb) Rv2626c. METHODS: The target gene attached with His tag was amplified from the genome of Mtb standard virulence strain H37Rv. The recombinant plasmid contained the above amplified product was constructed and electroporated into Mycobacterium smegmatis (Ms) (MC 2155) to construct a recombinant strain. Protein expression was induced under heat condition, and the expression of protein from the culture filtrates and the bacterial lysates was detected afterward. The 10 kDa culture filtrate antigen (CFP-10) (Ms) and CFP-10 (Mtb) were used as positive controls, and the cytoplasmic protein heat shock protein 65 (GroEL2) (Mtb) was used as negative controls. RESULTS: The HRP1, GroEL2 (Mtb), CFP-10 (Mtb) and CFP-10 (Ms) were successfully amplified by PCR from recombinant plasmid, and sequencing results of the recombinant plasmid is right, confirming the successful construction of the recombinant plasmid. The recombinant Ms was successfully constructed and it could express the proteins GroEL2 (Mtb), HRP1, CFP-10 (Mtb) and CFP-10 (Ms). The target protein HRP1 was detected in both of the lysate and the culture filtrate of the recombinant strain by Western blot, which was consistent with the positive control CFP-10. The negative control GroEL2 (Mtb) was only detected in the bacterial lysate, but not detected in the culture filtrate. CONCLUSION: The protein HRP1 encoded by Mtb Rv2626c can be secreted out of Ms by the secretion system of Ms. It may be a secreted protein and play an important role in the pathogenesis of Mtb.

A polymeric composite protective layer for stable Li metal anodes.

Lithium (Li) metal is a promising anode for high-performance secondary lithium batteries with high energy density due to its highest theoretical specific capacity and lowest electrochemical potential among anode materials. However, the dendritic growth and detrimental reactions with electrolyte during Li plating raise safety concerns and lead to premature failure. Herein, we report that a homogeneous nanocomposite protective layer, prepared by uniformly dispersing AlPO4 nanoparticles into the vinylidene fluoride-co-hexafluoropropylene matrix, can effectively prevent dendrite growth and lead to superior cycling performance due to synergistic influence of homogeneous Li plating and electronic insulation of polymeric layer. The results reveal that the protected Li anode is able to sustain repeated Li plating/stripping for > 750 cycles under a high current density of 3 mA cm-2 and a renders a practical specific capacity of 2 mAh cm-2. Moreover, full-cell Li-ion battery is constructed by using LiFePO4 and protected Li as a cathode and anode, respectively, rendering a stable capacity after 400 charge/discharge cycles. The current work presents a promising approach to stabilize Li metal anodes for next-generation Li secondary batteries.

A Facile Approach to High Precision Detection of Cell-to-Cell Variation for Li-ion Batteries.

Over the past decade, it has been repeatedly demonstrated that homogeneity in electrochemical performance of lithium-ion cells plays a major role in determining the life and safety of lithium-ion battery modules or packs. Generally, the homogeneity of a battery pack is evaluated by characterizing the cells individually in terms of capacity, mass, impedance. Particularly, high quality electrochemical data heavily relies on the availability of high precision current source to minimize the discrepancy induced by the channel-to-channel variation. Here, a facile and precise measurement method is reported for screening cell-to-cell variations, in which voltage is the only indicator parameter independent of high precision current source. In detail, by connecting the cells in series (CiS), the measurement error of electrochemical data caused by stability and discrepancy of current sources among different charge/discharge equipment can be effectively avoided. The findings of this work showed that the cell-to-cell variations can be simply and sensitively detected with CiS configuration. For example, the relative standard deviation, which is the evaluation criterion of battery homogeneity, was 2.14% based on CiS while it was 0.43% based on individual measurements. The simple and precise CiS measurement is promising for evaluation of cell quality or module integration quality. In addition, this work can also provide a solid foundation for the development of detection algorithms for battery management systems to rapidly monitor battery homogeneity.