Formation of Strong Boron Lewis Acid Sites on Silica.

Bis(1-methyl-ortho-carboranyl)borane (HBMeoCb2) is a very strong Lewis acid that reacts with the isolated silanols present on silica partially dehydroxylated at 700 °C (SiO2-700) to form the well-defined Lewis site MeoCb2B(OSi≡) (1) and H2. 11B{1H} magic-angle spinning (MAS) nuclear magnetic resonance (NMR) data of 1 are consistent with that of a three-coordinate boron site. Contacting 1 with O═PEt3 (triethylphosphine oxide TEPO) and measuring 31P{1H} MAS NMR spectra show that 1 preserves the strong Lewis acidity of HBMeoCb2. Hydride ion affinity and fluoride ion affinity calculations using small molecules analogs of 1 also support the strong Lewis acidity of the boron sites in this material. Reactions of 1 with Cp2Hf(13CH3)2 show that the Lewis sites are capable of abstracting methide groups from Hf to form [Cp2Hf-13CH3][H313C-B(MeoCb2)OSi≡], but with a low overall efficiency.

Geometry and electronic structure of Yb(III)[CH(SiMe3)2]3 from EPR and solid-state NMR augmented by computations.

Characterization of paramagnetic compounds, in particular regarding the detailed conformation and electronic structure, remains a challenge, and - still today it often relies solely on the use of X-ray crystallography, thus limiting the access to electronic structure information. This is particularly true for lanthanide elements that are often associated with peculiar structural and electronic features in relation to their partially filled f-shell. Here, we develop a methodology based on the combined use of state-of-the-art magnetic resonance spectroscopies (EPR and solid-state NMR) and computational approaches as well as magnetic susceptibility measurements to determine the electronic structure and geometry of a paramagnetic Yb(III) alkyl complex, Yb(III)[CH(SiMe3)2]3, a prototypical example, which contains notable structural features according to X-ray crystallography. Each of these techniques revealed specific information about the geometry and electronic structure of the complex. Taken together, both EPR and NMR, augmented by quantum chemical calculations, provide a detailed and complementary understanding of such paramagnetic compounds. In particular, the EPR and NMR signatures point to the presence of three-centre-two-electron Yb-γ-Me-ß-Si secondary metal-ligand interactions in this otherwise tri-coordinate metal complex, similarly to its diamagnetic Lu analogues. The electronic structure of Yb(III) can be described as a single 4f13 configuration, while an unusually large crystal-field splitting results in a thermally isolated ground Kramers doublet. Furthermore, the computational data indicate that the Yb-carbon bond contains some π-character, reminiscent of the so-called α-H agostic interaction.

A Supported Ziegler-Type Organohafnium Site Metabolizes Polypropylene.

Cp2Hf(CH3)2 reacts with silica containing strong aluminum Lewis sites to form Cp2Hf-13CH3+ paired with aluminate anions. Solid-state NMR studies show that this reaction also forms neutral organohafnium and hafnium sites lacking methyl groups. Cp2Hf-13CH3+ reacts with isotatic polypropylene (iPP, Mn = 13.3 kDa; D = 2.4; mmmm = 94%; ∼110 C3H6/Hf) and H2 to form oils with moderate molecular weights (Mn = 290-1200 Da) in good yields. The aliphatic oils show characteristic 13C{1H} NMR properties consistent with complete loss of diastereoselectivity and formation of regioirregular errors under 1 atm H2. These results show that a Ziegler-Natta-type active site is compatible in a common reaction used to digest waste plastic into smaller aliphatic fragments.

Effects of surface acidity on the structure of organometallics supported on oxide surfaces.

Well-defined organometallics supported on high surface area oxides are promising heterogeneous catalysts. An important design factor in these materials is how the metal interacts with the functionalities on an oxide support, commonly anionic X-type ligands derived from the reaction of an organometallic M-R with an -OH site on the oxide. The metal can either form a covalent M-O bond or form an electrostatic M+⋯-O ion-pair, which impacts how well-defined organometallics will interact with substrates in catalytic reactions. A less common reaction pathway involves the reaction of a Lewis site on the oxide with the organometallic, resulting in abstraction to form an ion-pair, which is relevant to industrial olefin polymerization catalysts. This Feature Article views the spectrum of reactivity between an organometallic and an oxide through the prism of Brønsted and/or Lewis acidity of surface sites and draws analogies to the molecular frame where Lewis and Brønsted acids are known to form reactive ion-pairs. Applications of the well-defined sites developed in this article are also discussed.

Cationic Tantalum Hydrides Catalyze Hydrogenolysis and Alkane Metathesis Reactions of Paraffins and Polyethylene.

Sulfated aluminum oxide (SAO), a high surface area material containing sulfate anions that behave like weakly coordinating anions, reacts with Ta(═CHtBu)(CH2tBu)3 to form [Ta(CH2tBu)2(O-)2][SAO] (1). Subsequent treatment with H2 forms Ta-H+ sites supported on SAO that are active in hydrogenolysis and alkane metathesis reactions. In both reactions Ta-H+ is more active than related neutral Ta-H sites supported on silica. This reaction chemistry extends to melts of high-density polyethylene (HDPE), where Ta-H+ converts 30% of a low molecular weight HDPE (Mn = 2.5 kg mol-1; D = 3.6) to low molecular weight paraffins under hydrogenolysis conditions. Under alkane metathesis conditions Ta-H+ converts this HDPE to a high MW fraction (Mn = 6.2 kDa; D = 2.3) and low molecular weight alkane products (C13-C32). These results show that incorporating charge as a design element in supported d0 metal hydrides is a viable strategy to increase the reaction rate in challenging reactions involving reorganization of C-C bonds in alkanes.

Ring Contraction of a Tungstacyclopentane Supported on Silica: Direct Conversion of Ethylene to Propylene.

The reaction of W(NAr)(13C4H8)(OSiPh3)2 (1) (NAr = 2,6-diisopropylphenylimido) with silica partially dehydroxylated at 700 °C (SiO2-700) is highly dependent on the reaction conditions. The primary product of this reaction is W(NAr)(13C4H8)(OSiPh3)(OSi(O-)3) (2) when the reaction is carried out in the dark. Grafting 1 onto SiO2-700 in ambient lab light results in the formation of 2, W(NAr)(13CH213CH2)(OSiPh3)(OSi(O-)3) (4), and one isomer of square-pyramidal W(NAr)(13CH213CH(13Me)13CH2)(OSiPh3)(OSi(O-)3) (3). Heating 2 to 85 °C for 6 h results in the formation of 3, 4, W(NAr)(13CH(13Me)13CH213CH2)(OSiPh3)(OSi(O-)3) (5), and W(NAr)((13CH2)213CH(13Me)(13CH2)2)(OSiPh3)(OSi(O-)3) (6). Photolysis of 2 with blue LEDs (λmax = 450 nm) produces 4, both isomers of 3, 5, and free ethylene. In the presence of excess ethylene and blue LED irradiation at 85 °C, 1/SiO2-700 catalyzes the direct conversion of ethylene to propylene.

Formation of a Strong Heterogeneous Aluminum Lewis Acid on Silica.

Al(OC(CF3 )3 )(PhF) reacts with silanols present on partially dehydroxylated silica to form well-defined ≡SiOAl(OC(CF3 )3 )2 (O(Si≡)2 ) (1). 27 Al NMR and DFT calculations with a small cluster model to approximate the silica surface show that the aluminum in 1 adopts a distorted trigonal bipyramidal coordination geometry by coordinating to a nearby siloxane bridge and a fluorine from the alkoxide. Fluoride ion affinity (FIA) calculations follow experimental trends and show that 1 is a stronger Lewis acid than B(C6 F5 )3 and Al(OC(CF3 )3 )(PhF) but is weaker than Al(OC(CF3 )3 ) and i Pr3 Si+ . Cp2 Zr(CH3 )2 reacts with 1 to form [Cp2 ZrCH3 ][≡SiOAl(OC(CF3 )3 )2 (CH3 )] (3) by methide abstraction. This reactivity pattern is similar to reactions of organometallics with the proposed strong Lewis acid sites present on Al2 O3 .

Tungstacyclopentane Ring Contraction Yields Olefin Metathesis Catalysts.

Exposure of a solution of the square pyramidal tungstacyclopentane complex W(NAr)(OSiPh3)2(C4H8) (Ar = 2,6-i-Pr2C6H3) to ethylene at 22 °C in ambient (fluorescent) light slowly leads to the formation of propylene and the square pyramidal tungstacyclobutane complex W(NAr)(OSiPh3)2(C3H6). No reaction takes place in the dark, but the reaction is >90% complete in ∼15 min under blue LED light (∼450 nm λmax). The intermediates are proposed to be (first) an α methyl tungstacyclobutane complex (W(NAr)(OSiPh3)2(αMeC3H5)), and then from it, a ß methyl version. The TBP versions of each can lose propylene and form a methylene complex, and in the presence of ethylene, the unsubstituted tungstacyclobutane complex W(NAr)(OSiPh3)2(C3H6). The W-Cα bond in an unobservable TBP W(NAr)(OSiPh3)2(C4H8) isomer in which the C4H8 ring is equatorial is proposed to be cleaved homolytically by light. A hydrogen atom moves or is moved from C3 to the terminal C4 carbon in the butyl chain as the bond between W and C3 forms to give the TBP α methyl tungstacyclobutane complex. Essentially, the same behavior is observed for W(NCPh3)(OSiPh3)2(C4H8) as for W(NAr)(OSiPh3)2(C4H8), except that the rate of consumption of W(NCPh3)(OSiPh3)2(C4H8) is about half that of W(NAr)(OSiPh3)2(C4H8). In this case, an α methyl-substituted tungstacyclobutane intermediate is observed, and the overall rate of formation of W(NCPh3)(OSiPh3)2(C3H6) and propylene from W(NCPh3)(OSiPh3)2(C4H8) is ∼20 times slower than in the NAr system. These results constitute the first experimentally documented examples of forming a metallacyclobutane ring from a metallacyclopentane ring (ring contraction) and establish how metathesis-active methylene and metallacyclobutane complexes can be formed and reformed in the presence of ethylene. They also raise the possibility that ambient light could play a role in some metathesis reactions that involve ethylene and tungsten-based imido alkylidene olefin metathesis catalysts, if not others.

A Heterogeneous Iridium Catalyst for the Hydroboration of Pyridines.

Sulfated zirconium oxide (SZO) capped with silylium-like ions reacts with (cod)Ir(py)Cl (cod = 1,5-cyclooctadiene; py = pyridine) to form [Ir(cod)py][SZO] (1) and Me3SiCl. 1 can also be formed in reactions of phosphonium functionalized SZO and [Ir(cod)(OSi(OtBu)3]2, which forms [Ir(cod)P(tBu)2Ph][SZO] (2), followed by reaction with pyridine to form 1. FTIR and 15N{1H} MAS NMR spectroscopy are consistent with coordination of pyridine in 1 to an electrophilic iridium. 1 is moderately active in the dearomative hydroboration of pyridine. The primary product of this reaction is 1,2-dihydropyridine, which converts to the 1,4-dihydropyridine product at long reaction times. 1 catalyzes the dearomative hydroboration of a variety of substituted pyridines and is also reactive toward pyrazines and N-methylimidazole.

The coordination chemistry of oxide and nanocarbon materials.

Understanding how a ligand affects the steric and electronic properties of a metal is the cornerstone of the inorganic chemistry enterprise. What happens when the ligand is an extended surface? This question is central to the design and implementation of state-of-the-art functional materials containing transition metals. This perspective will describe how these two very different sets of extended surfaces can form well-defined coordination complexes with metals. In the Green formalism, functionalities on oxide surfaces react with inorganics to form species that contain X-type or LX-type interactions between the metal and the oxide. Carbon surfaces are neutral L-type ligands; this perspective focuses on carbons that donate six electrons to a metal. The nature of this interaction depends on the curvature, and thereby orbital overlap, between the metal and the extended π-system from the nanocarbon.

A Heterogeneous Palladium Catalyst for the Polymerization of Olefins Prepared by Halide Abstraction Using Surface R3 Si+ Species.

The silylium-like surface species [i Pr3 Si][(RF O)3 Al-OSi≡)] activates (N^N)Pd(CH3 )Cl (N^N=Ar-N=CMeMeC=N-Ar, Ar=2,6-bis(diphenylmethyl)-4-methylbenzene) by chloride ion abstraction to form [(N^N)Pd-CH3 ][(RF O)3 Al-OSi≡)] (1). A combination of FTIR, solid-state NMR spectroscopy, and reactions with CO or vinyl chloride establish that 1 shows similar reactivity patterns as (N^N)Pd(CH3 )Cl activated with Na[B(ArF )4 ]. Multinuclear 13 C{27 Al} RESPDOR and 1 H{19 F} S-REDOR experiments are consistent with a weakly coordinated ion-pair between (N^N)Pd-CH3 + and [(RF O)3 Al-OSi≡)]. 1 catalyzes the polymerization of ethylene with similar activities as [(N^N)Pd-CH3 ]+ in solution and incorporates up to 0.4 % methyl acrylate in copolymerization reactions. 1 produces polymers with significantly higher molecular weight than the solution catalyst, and generates the highest molecular weight polymers currently reported in copolymerization reactions of ethylene and methylacrylate.

Solid-state 11B NMR studies of coinage metal complexes containing a phosphine substituted diboraanthracene ligand.

Transition metal interactions with Lewis acids (M → Z linkages) are fundamentally interesting and practically important. The most common Z-type ligands contain boron, which contains an NMR active 11B nucleus. We measured solid-state 11B{1H} NMR spectra of copper, silver, and gold complexes containing a phosphine substituted 9,10-diboraanthracene ligand (B2P2) that contain planar boron centers and weak M → BR3 linkages ([(B2P2)M][BArF4] (M = Cu (1), Ag (2), Au (3)) characterized by large quadrupolar coupling (CQ) values (4.4-4.7 MHz) and large span (Ω) values (93-139 ppm). However, the solid-state 11B{1H} NMR spectrum of K[Au(B2P2)]- (4), which contains tetrahedral borons, is narrow and characterized by small CQ and Ω values. DFT analysis of 1-4 shows that CQ and Ω are expected to be large for planar boron environments and small for tetrahedral boron, and that the presence of a M → BR3 linkage relates to the reduction in CQ and 11B NMR shielding properties. Thus solid-state 11B NMR spectroscopy contains valuable information about M → BR3 linkages in complexes containing the B2P2 ligand.

Interconversion of Molybdenum or Tungsten d2 Styrene Complexes with d0 1-Phenethylidene Analogues.

Upon addition of 5-15% PhNMe2H+X- (X = B(3,5-(CF3)2C6H3)4 or B(C6F5)4) to Mo(NAr)(styrene)(OSiPh3)2 (Ar = N-2,6-i-Pr2C6H3) in C6D6 an equilibrium mixture of Mo(NAr)(styrene)(OSiPh3)2 and Mo(NAr)(CMePh)(OSiPh3)2 is formed over 36 h at 45 °C (Keq = 0.36). A plausible intermediate in the interconversion of the styrene and 1-phenethylidene complexes is the 1-phenethyl cation, [Mo(NAr)(CHMePh)(OSiPh3)2]+, which can be generated using [(Et2O)2H][B(C6F5)4] as the acid. The interconversion can be modeled as two equilibria involving protonation of Mo(NAr)(styrene)(OSiPh3)2 or Mo(NAr)(CMePh)(OSiPh3)2 and deprotonation of the α or ß phenethyl carbon atom in [Mo(NAr)(CHMePh)(OSiPh3)2]+. The ratio of the rate of deprotonation of [Mo(NAr)(CHMePh)(OSiPh3)2]+ by PhNMe2 in the α position versus the ß position is ∼10, or ∼30 per Hß. The slow step is protonation of Mo(NAr)(styrene)(OSiPh3)2 (k1 = 0.158(4) L/(mol·min)). Proton sources such as (CF3)3COH or Ph3SiOH do not catalyze the interconversion of Mo(NAr)(styrene)(OSiPh3)2 and Mo(NAr)(CMePh)(OSiPh3)2, while the reaction of Mo(NAr)(styrene)(OSiPh3)2 with pyridinium salts generates only a trace (∼2%) of Mo(NAr)(CMePh)(OSiPh3)2 and forms a monopyridine adduct, [Mo(NAr)(CHMePh)(OSiPh3)2(py)]+ (two diastereomers). The structure of [Mo(NAr)(CHMePh)(OSiPh3)2]+ has been confirmed in an X-ray study; there is no structural indication that a ß proton is activated through a CHß interaction with the metal. W(NAr)(CMePh)(OSiPh3)2 is also converted into a mixture of W(NAr)(CMePh)(OSiPh3)2 and W(NAr)(styrene)(OSiPh3)2 (Keq = 0.47 at 45 °C in favor of the styrene complex) with 10% [PhNMe2H][B(C6F5)4] as the catalyst; the time required to reach equilibrium is approximately the same as in the Mo system.

Active Sites in a Heterogeneous Organometallic Catalyst for the Polymerization of Ethylene.

Heterogeneous derivatives of catalysts discovered by Ziegler and Natta are important for the industrial production of polyolefin plastics. However, the interaction between precatalysts, alkylaluminum activators, and oxide supports to form catalytically active materials is poorly understood. This is in contrast to homogeneous or model heterogeneous catalysts that contain resolved molecular structures that relate to activity and selectivity in polymerization reactions. This study describes the reactivity of triisobutylaluminum with high surface area aluminum oxide and a zirconocene precatalyst. Triisobutylaluminum reacts with the zirconocene precatalyst to form hydrides and passivates -OH sites on the alumina surface. The combination of passivated alumina and zirconium hydrides formed in this mixture generates ion pairs that polymerize ethylene.

Ethylene Polymerization Activity of (R3P)Ni(codH)+ (cod = 1,5-cylcooctadiene) Sites Supported on Sulfated Zirconium Oxide.

PAr3 containing o-OMe, o-Me, or o-Et substituents reacts with Brønsted sites on sulfated zirconium oxide (SZO) to form [HPAr3][SZO]. The phosphonium sites on this material react with bis(cyclooctadiene)nickel [Ni(cod)2] to form [Ni(PAr3)(codH)][SZO] that are active in ethylene polymerization reactions. Selective poisoning studies with pyridine show that ∼90% of the Ni(PAr3)(codH)+ sites in this material are active in polymerization reactions.

Origin of the 29Si NMR chemical shift in R3Si-X and relationship to the formation of silylium (R3Si+) ions.

The origin in deshielding of 29Si NMR chemical shifts in R3Si-X, where X = H, OMe, Cl, OTf, [CH6B11X6], toluene, and OX (OX = surface oxygen), as well as iPr3Si+ and Mes3Si+ were studied using DFT methods. At the M06-L/6-31G(d,p) level of theory the geometry optimized structures agree well with those obtained experimentally. The trends in 29Si NMR chemical shift also reproduce experimental trends; iPr3Si-H has the most shielded 29Si NMR chemical shift and free iPr3Si+ or isolable Mes3Si+ have the most deshielded 29Si NMR chemical shift. Natural localized molecular orbital (NLMO) analysis of the contributions to paramagnetic shielding (σp) in these compounds shows that Si-R (R = alkyl, H) bonding orbitals are the major contributors to deshielding in this series. The Si-R bonding orbitals are coupled to the empty p-orbital in iPr3Si+ or Mes3Si+, or to the orbital in R3Si-X. This trend also applies to surface bound R3Si-OX. This model also explains chemical shift trends in recently isolated tBu2SiH2+, tBuSiH2+, and SiH3+ that show more shielded 29Si NMR signals than R3Si+ species. There is no correlation between isotropic 29Si NMR chemical shift and charge at silicon.

Characterization of Reactive Organometallic Species via MicroED.

Here we apply microcrystal electron diffraction (MicroED) to the structural determination of transition-metal complexes. We find that the simultaneous use of 300 keV electrons, very low electron doses, and an ultrasensitive camera allows for the collection of data without cryogenic cooling of the stage. This technique reveals the first crystal structures of the classic zirconocene hydride, colloquially known as "Schwartz's reagent", a novel Pd(II) complex not amenable to solution-state NMR or X-ray crystallography, and five other paramagnetic and diamagnetic transition-metal complexes.

Generation of Phosphonium Sites on Sulfated Zirconium Oxide: Relationship to Brønsted Acid Strength of Surface -OH Sites.

The reaction of (tBu)2ArP (1a-h), where the para position of the Ar group contains electron-donating or electron-withdrawing groups, with sulfated zirconium oxide partially dehydroxylated at 300 °C (SZO300) forms [(tBu)2ArPH][SZO300] (2a-h). The equilibrium binding constants of 1a-h to SZO300 are related to the p Ka of [(tBu)2ArPH]; R3P that form less acidic phosphoniums (high p Ka values) bind stronger to SZO300 than R3P that form more acidic phosphoniums (low p Ka values). These studies show that Brønsted acid sites on the surface of SZO300 are not superacidic.

Al(ORF)3 (RF = C(CF3)3) activated silica: a well-defined weakly coordinating surface anion.

Weakly Coordinating Anions (WCAs) containing electron deficient delocalized anionic fragments that are reasonably inert allow for the isolation of strong electrophiles. Perfluorinated borates, perfluorinated aluminum alkoxides, and halogenated carborane anions are a few families of WCAs that are commonly used in synthesis. Application of similar design strategies to oxide surfaces is challenging. This paper describes the reaction of Al(ORF)3*PhF (RF = C(CF3)3) with silica partially dehydroxylated at 700 °C (SiO2-700) to form the bridging silanol [triple bond, length as m-dash]Si-OH⋯Al(ORF)3 (1). DFT calculations using small clusters to model 1 show that the gas phase acidity (GPA) of the bridging silanol is 43.2 kcal mol-1 lower than the GPA of H2SO4, but higher than the strongest carborane acids, suggesting that deprotonated 1 would be a WCA. Reactions of 1 with NOct3 show that 1 forms weaker ion-pairs than classical WCAs, but stronger ion-pairs than carborane or borate anions. Though 1 forms stronger ion-pairs than these state-of-the-art WCAs, 1 reacts with alkylsilanes to form silylium type surface species. To the best of our knowledge, this is the first example of a silylium supported on derivatized silica.

π-Bond Character in Metal-Alkyl Compounds for C-H Activation: How, When, and Why?

C-H bond activation via σ-bond metathesis is typically observed with transition-metal alkyl compounds in d0 or d0fn electron configurations, e.g., biscyclopentadienyl metal alkyls. Related C-H activation processes are also observed for transition-metal alkyls with higher d-electron counts, such as W(II), Fe(II), or Ir(III). A σ-bond metathesis mechanism has been proposed in all cases with a preference for an oxidative addition-reductive elimination pathway for Ir(III). Herein we show that, regardless of the exact mechanism, C-H activation with all of these compounds is associated with π-character of the M-C bond, according to a detailed analysis of the 13C NMR chemical shift tensor of the α-carbon. π-Character is also a requirement for olefin insertion, indicating its similarity to σ-bond metathesis. This observation explains the H2 response observed in d0 olefin polymerization catalysts and underlines that σ-bond metathesis, olefin insertion, and olefin metathesis are in fact isolobal reactions.