ABSTRACT
Residual biomass gasification is a promising route for the production of H2-rich syngas. However, the simultaneous formation of pollutants such as light hydrocarbons (HCs), benzene, toluene and xylenes (BTEX), polycyclic aromatic hydrocarbons (PAHs), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) during gasification must be controlled. As a result, this study evaluated the effect of temperature and catalytic reforming over a Rh-Pt/CeO2-SiO2 catalyst during steam gasification of sugarcane residual biomass on syngas composition and pollutant removal. The above was carried out in a horizontal moving reactor, an Amberlite XAD-2 polyaromatic resin was used to collect the contaminants and characterization of the catalyst was performed. In this study, a concentration of up to 37 mol% of H2, a yield of 23.1 g H2 kg-1biomass, and a H2/CO ratio ≥2 were achieved when gasification and reforming were integrated. In addition, the catalyst characterization showed that Rh-Pt/CeO2-SiO2 was not susceptible to sintering and favored the formation of hydroxyl groups that promoted CO oxidation, thereby increasing the H2/CO ratio, as confirmed by in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). At 800 °C, where a high H2 yield was obtained, 209 g Nm-3 of light HCs and BTEX, 10.9 g Nm-3 of PAHs, and 32.5 ng WHO-TEQ Nm-3 of PCDD/Fs were formed after gasification. Interestingly, after catalytic reforming, 62% of light HCs and BTEX, 60% of PAHs, and 94% of PCDD/Fs were removed, leading to cleaner syngas with properties that allow it to be used in a wide range of energy applications.