The glossopharyngeal nerve (IX cranial nerve pair): anatomical considerations and neuralgia: literature review / O nervo glossofaringeo (IX par de nervo craniano): considerações anatômicas e neuralgia: revisão da literatura

The glossopharyngeal nerve (IX cranial nerve) is a mixed nerve, with both motor and sensory function. This relates to the tongue and pharynx. Glossopharyngeal neuralgia is a rare nervous neuropathy, with poristic, lancinating and paritary crises, usually unilateral. The aim of the study was to review the literature on glossopharyngeal neuralgia of the nerve (IX cranial nerve), highlighting the anatomical aspects of this nerve and the possible causes and complications of neuralgia as well as forms of treatment. A literature review was carried out in the international Pubmed database. The literature review included 72 articles from 2015 to 2021. The keywords used were: "anatomy of glossopharyngeal neuralgia". Of the 72 articles, 7 were used for this literature review. Uncommon as nervous/glossophingeal etiologies and pathologies are neurological abnormalities/neurovarises and pathologies are neurovascular/neurovariseal lesions. Pharmacological treatment approaches mentioned in the literature were therapy with antiepileptics and antidepressants such as carbamazepine and gabapentin; a microvascular decompression; and gamma knife radiosurgery(AU)

O nervo glossofaríngeo (IX par de nervo craniano) é um nervo misto, contendo função tanto motora como sensitiva. Este nervo relaciona-se com a língua e com a faringe. A neuralgia do nervo glossofaríngeo é uma neurapatia rara, sendo caracterizada por crises dolorosas, lancinantes e paroxísticas, geralmente unilaterais. O objetivo do estudo foi realizar uma revisão de literatura sobre a neuralgia do nervo glossofaríngeo (IX par de nervo craniano), destacando os aspectos anatômicos deste nervo e as possíveis causas e complicações da neuralgia bem como formas de tratamento. Foi realizada uma revisão da literatura na base de dados internacional Pubmed. A revisão da literatura incluiu 72 artigos no período de 2015 a 2021. As palavras-chave utilizadas foram: "anatomia da neuralgia do glossofaríngeo". Dos 72 artigos, 7 foram utilizados para esta revisão de literatura. Verificouse que a neuralgia do nervo glossofaríngeo é incomum e as etiologias mais encontradas foram compressão neurovascular/variações vasculares, patologias e traumas. As abordagens dos tratamentos mencionadas na literatura foram a terapia farmacológica da área com antiepilépticos e antidepressivos, como carbamazepina e gabapentina; a descompressão microvascular; e radiocirurgia com faca gama(AU)

Chronic exposure to lead acetate promotes changes in the alveolar bone of rats: microstructural and physical-chemical characterization.

There are a few data relating to the effects of lead (Pb) exposure on the alveolar bone, which has very distinct morphophysiological characteristics and is of great importance in the oral cavity. In this context, the aim of this study was to investigate the changes promoted after long-term exposure to Pb in the microstructure of the alveolar bone of rats. Twenty adult Wistar rats were exposed to 50 mg/kg/day of lead acetate for 55 days. These animals were euthanized and had their mandible removed. Each mandible was divided into hemimandibles, and the alveolar bone was used for bone lead quantification, crystallinity analysis, microstructure evaluation by the percentage of bone volume (BV/TV), number of trabeculae (Tb.N), thickness of the trabecular (Tb.Th), and trabecular space (Tb.Sp). Morphometric analysis of the exposed root area was also performed. Long-term exposure to Pb resulted in high levels of Pb in the alveolar bone but showed no changes in the organization of crystallinity. The microstructural analyses showed a reduction of BV/TV, Tb.Th, and Tb.N and increase of Tb.Sp parameters, resulting in an increase in the exposed root area and an alveolar bone loss in height. The findings of this study reveal the ability of Pb to alter the alveolar bone microstructure after long-term exposure to the metal, possibly due to changes in tissue homeostasis, contributing to the reduction of bone quality.

Mastoid and opisthion-bimastoid triangles for sex determination in a Brazilian sample / Triangulos mastoideo y opistión-bimastoideo para la determinación del sexo en una muestra brasileña

SUMMARY: Human identification involving mutilation, advanced decomposition, and skeletonized materials is a challenge for professionals in forensic medicine and dentistry. This study was aimed at a morphometric analysis of the mastoid and bimastoid triangles to determine sex in a Brazilian population. The sample included 80 human skulls (34 females and 46 males; age: 18 to 60 years) from individuals with death certificates. Linear measurements (mm) of the mastoid process - right (n=3) and left (n=3) - and the opisthion- bimastoid (n=3) triangles were taken (digital caliper) by two previously trained researchers. Three cranial points - asterion, porion and process - were determined for the right and left mastoid triangle and three others - (1) opisthion and (2) right and (3) left mastoid - for the bimastoid triangle. Heron's formula was used to calculate the area of the triangles assessed. Data were submitted to the Shapiro- Wilk normality test, followed by the unpaired Student's t test or the Mann-Whitney U test, depending on the data distribution verified in the normality test (GraphPad Prism 5.01; p<0.05). The ROC curve was used to measure the accuracy of the variables toward sex determination. The opisthion-bimastoid triangle showed high accuracy and significant differences in all the variables assessed and thus was considered a potential element for sex determination in the Brazilian population assessed.

RESUMEN: La identificación humana que comprende la mutilación, descomposición avanzada y materiales esqueletizados, es un desafío para los profesionales de la medicina forense y de la odontología. Este estudio tuvo como objetivo un análisis morfométrico de los triángulos mastoideo y bimastoideo para determinar el sexo en una población brasileña. La muestra incluyó 80 cráneos humanos (34 mujeres y 46 hombres; edad: 18 a 60 años) de sujetos con certificado de defunción. Se tomaron las medidas lineales (mm) del proceso mastoides - derecha (n = 3) e izquierda (n = 3) - y los triángulos opistion-bimastoide (n = 3) (caliper digital) por dos investigadores previamente entrenados. Se determinaron tres puntos craneales - asterion, porion y proceso mastoides - para el triángulo mastoideo derecho e izquierdo y otros tres - (1) opistion y (2) proceso mastoides derecho e izquierdo - para el triángulo bimastoideo. Se utilizó la fórmula de Heron para calcular el área de los triángulos evaluados. Los datos se analizaron con la prueba de normalidad de Shapiro-Wilk, seguida de la prueba t de Student para datos no apareados o la prueba U de Mann-Whitney, según la distribución de datos verificada en la prueba de normalidad (GraphPad Prism 5.01; p <0.05). La curva ROC se utilizó para medir la precisión de las variables hacia la determinación del sexo. El triángulo opistion-bimastoide mostró una alta precisión y diferencias significativas en todas las variables evaluadas, por lo que se consideró un elemento probable para la determinación del sexo en la población brasileña evaluada.

Effects of premature contact in maxillary alveolar bone in rats: relationship between experimental analyses and a micro scale FEA computational simulation study.

OBJECTIVE: The aim of the investigation was to evaluate the maxillary alveolar bone morphology, bone architecture, and bone turnover in relation to the mechanical strain distribution in rats with dental premature contact. MATERIALS AND METHODS: Fifty 2-month-old male Wistar rats were used. The premature contact group (N=40) received a unilateral (right side) resin cementation on the occlusal surface of the upper first molar. The animals were distributed in 4 subgroups according to the periods of euthanasia: 7, 14, 21, and 28 days after cementation (N=10, for each period). For the control group (N=10), the teeth were kept without resin, featuring a normal occlusion. The pieces including the upper first molars, alveolar bone, and periodontal tissue were processed to histological and immunohistochemical evaluation of RANK-L and TRAP protein expression. A three-dimensional bone microarchitecture analysis was performed, where the heads of animals were scanned using microtomography and analyzed using CT-Analyser software (Bruker, Kontich, Belgium). In the computer simulation by finite element analysis, two micro-scaled three-dimensional finite element models of first molar and dentoalveolar tissues were constructed, in representation of control and premature contact groups, using Materialise MIMICS Academic Research v18 (Materialise, Leuven, Belgium). The analysis was set to simulate a maxillary molar biting during the power stroke phase. The total deformation, equivalent strain, and minimum principal strain distribution were calculated. RESULTS: The expression of RANK-L and TRAP presented higher positive ratio in the 7-day period compared to the control group. The three-dimensional morphometry showed decrease of bone volume in the premature contact, with significant values between the control and the 7-day and 14-day groups (P = 0.007). In FEA, the premature contact model presented a uniform compressive strain distribution in the alveolar bone crest compared to a non-uniform compressive strain distribution in the control model. CONCLUSIONS: The results from FEA, 3D bone microarchitecture, and histological and immunohistochemical analyses showed that a model with dental traumatic occlusion resulted in changes of alveolar bone mechanobiology and, consequently, its morphology. CLINICAL RELEVANCE: These results could be applied in dental treatment planning bringing biological and mechanical feedback to provide an effective mechanism to obtain physiological bone loss responses. Furthermore, this association between experimental and computational analyses will be important to figure out the alveolar bone response to mechanical stimulation in different clinical conditions.

ß-catenin and Its Relation to Alveolar Bone Mechanical Deformation - A Study Conducted in Rats With Tooth Extraction.

The aim of this study was to analyze the relationship between alveolar bone deformation and ß-catenin expression levels in response to the mechanical load changed by dental extraction in adult rats. Twenty-four male rats (Rattus norvegicus albinus), Wistar linage, at 2 months of age, were used. The right upper incisor tooth was extracted, and euthanasia occurred in periods 5 (n = 6), 7 (n = 6), and 14 (n = 6) days after Day 0. In the control group (n = 6), the dentition was maintained. The euthanasia occurred within 14 days after day 0. After euthanasia, the rats of all groups had their left jaw with tooth removed and separated in the middle. The pieces were undergone routine histological processing and then the immunohistochemical marking were performed to label expression of the primary ß-catenin antibody, which was evaluated by qualitative and quantitative analysis. One head by each group (control and experimental) was submitted to computerized microtomography. After the three-dimensional reconstruction of the skull of the rat in each group, the computational simulation for finite elements analysis were performed to simulate a bite in the incisors. In finite element analysis, the strain patterns were evaluated after the application of bite force. The results were analyzed considering the areas in which changes in the amount of deformations were detected. The action of the bite force in the experimental condition, resulted in a uniform distribution of the amount of deformations, in addition to lower amount of deformation areas, differentiating from the control group. Comparing with the control group, the levels of ß-catenin signaled in the lingual bone of the middle third of the alveolar bone were raised in the periods of 5 and 14 days. The increased ß-catenin positive staining intensity was concentrated on osteocytes and gaps of osteocytes. The findings of the present study were in accordance with our hypothesis that the condition of dental extraction can cause the expression of ß-catenin and alter the regimes of bone deformation.

Craniofacial injuries by firearms projectiles: An analysis of 868 deaths in the five regions of Brazil.

Firearms injuries have a legal and medico-legal importance, and are especially lethal when they reach the craniofacial regions of the victim. The present study aims to identify the characteristics of craniofacial lesions resulting from firearm projectiles, to register the most affected craniofacial regions by this type of injury and to verify the demographic profile of the victims. A retrospective study was carried out on the autopsy records produced in the first semester of 2015, in five Institutes of Legal Medicine in Porto Velho, situated in the cities of João Pessoa, Vitória, Porto Alegre and Brasília. Data extracted included sex, skin color and age of the victim, craniofacial region reached, shooting distance, shape and size of the injuries and manner of death (homicide, suicide or accident). Based on the 868 reports analyzed, it was possible to observe 1700 entrance lesions of firearm projectiles in craniofacial regions. Among cases of known manner of death, homicides were the most frequent (97.0%). It was observed a higher frequency of male victims (93.3%), mixed race (62.0%), between the ages of 12 and 29 years (59.4%). In all cases considered as suicide or accident there was only one entrance wound, but in 82.8% of the homicides there were multiple gunshot wounds. The craniofacial most affected regions were temporal (25.2%) and occipital (19.8%). The most common sites of projectiles exit were the temporal (25.3%) and parietal (16.1%). All cases of suicide were related to contact shot (69.2%) or close-range shot (30.8%), and among the homicides the distant range shots were more frequent (54.0%). The shape of entrance wounds was mostly circular (56.8%) and oval (31.3%), and among the exit injuries, the lesions were irregular (43.3%) and starry (24.1%). The entrance wounds showed smaller sizes than the exit lesions (p < 0.0001). The data obtained are useful for guiding research that takes into account craniofacial trauma caused by firearm projectiles, makes it possible to compare this data with those of other countries and can base investigative conclusions based on the analyzes discussed in the present work.

Application and validation of Diagnose Sexuelle Probabiliste V2 tool in a miscegenated population.

The hip bone (os coxae) is the skeletal element that presents the greatest level of sexual dimorphism. Therefore, methods involving the analysis of the os coxae provide the most accurate sex estimation, and DSP2 (Diagnose Sexuelle Probabiliste v.2) is one of the most accurate tools used in this identification. The goal of this study is to apply and validate DSP2 in the identification of 103 os coxae (53 male and 50 female) belonging to a Brazilian-identified skeletal collection. Differences between sexes were statistically significant for all measurements, except for the acetabulo-symphyseal and spino-auricular lengths. From the 103 os coxae analyzed, there was a 9.43% error in male individuals and a 14% error in females. The results revealed that DSP2 can be applied to Brazilian-mixed populations with a good index of accuracy, although at a lower accuracy than other population samples. This study also clearly demonstrates that metric variation of the os coxae is extremely useful in sex estimation and reinforces the notion that pelvic sexual dimorphism is not population-specific.

Alveolar bone healing in rats: micro-CT, immunohistochemical and molecular analysis.

INTRODUCTION: Alveolar bone healing after upper incisor extraction in rats is a classical model of preclinical studies. The underlying morphometric, cellular and molecular mechanism, however, remains imprecise in a unique study. OBJECTIVES: The aim of this study was therefore to characterize the alveolar bone healing after upper incisor extraction in rats by micro computed tomographic (Micro-CT), immunohistochemical and real-time polymerase chain reaction (RT-PCR) analysis. MATERIAL AND METHODS: Thirty animals (Rattus norvegicus, Albinus Wistar) were divided into three groups after upper incisors extraction at 7, 14, and 28 days. Micro-CT was evaluated based on the morphometric parameters. Subsequently, the histological analyses and immunostaining of osteoprotegerin (OPG), receptor activator of nuclear kappa B ligand (RANKL) and tartrate resistant acid phosphate (TRAP) was performed. In addition, RT-PCR analyses of OPG, RANKL, the runt-related transcription factor 2 (RUNX2), osteocalcin (OC), osteopontin (OPN), osterix (OST) and receptor activator of nuclear kappa B (RANK) were performed to determine the expression of these proteins in the alveolar bone healing. RESULTS: Micro-CT: The morphometric parameters of bone volume and trabecular thickness progressively increased over time. Consequently, a gradual decrease in trabecular separation, trabecular space and total bone porosity was observed. Immunohistochemical: There were no differences statistically significant between the positive labeling for OPG, RANKL and TRAP in the different periods. RT-PCR: At 28 days, there was a significant increase in OPG expression, while RANKL expression and the RANKL/OPG ratio both decreased over time. CONCLUSION: Micro-CT showed the newly formed bone had favorable morphometric characteristics of quality and quantity. Beyond the RUNX2, OC, OPN, OST, and RANK proteins expressed in the alveolar bone healing, OPG and RANKL activity showed to be essential for activation of basic multicellular units during the alveolar bone healing.

A SERM increasing the expression of the osteoblastogenesis and mineralization-related proteins and improving quality of bone tissue in an experimental model of osteoporosis.

Raloxifene is an antiresorptive drug, selective estrogen receptor modulator (SERM) used in the treatment of osteoporosis. Objective To evaluate proteins related to bone repair at the peri-implant bone in a rat model of osteoporosis treated with raloxifene. Material and Methods 72 rats were divided into three groups: SHAM (healthy animals), OVX (ovariectomized animals), and RLX (ovariectomized animals treated with raloxifene). Raloxifene was administered by gavage (1 mg/kg/day). Tibial implantation was performed 30 days after ovariectomy, and animals were euthanized at 14, 42, and 60 days postoperatively. Samples were collected and analyzed by immunohistochemical reactions, molecular analysis, and microtomographic parameters. Results RLX showed intense staining of all investigated proteins at both time points except for RUNX2. These results were similar to SHAM and opposite to OVX, showing mild staining. The PCR gene expression of OC and ALP values for RLX (P<0.05) followed by SHAM and OVX groups. For BSP data, the highest expression was observed in the RLX groups and the lowest expression was observed in the OVX groups (P<0.05). For RUNX2 data, RLX and SHAM groups showed greater values compared to OVX (P<0.05). At 60 days postoperatively, microtomography parameters, related to closed porosity, showed higher values for (Po.N), (Po.V), and (Po) in RLX and SHAM groups, whereas OVX groups showed lower results (P<0.05); (BV) values (P=0.009); regarding total porosity (Po.tot), RLX group had statistically significant lower values than OVX and SHAM groups (P=0.009). Regarding the open porosity (Po.V and Po), the SHAM group presented the highest values, followed by OVX and RLX groups (P<0.05). The Structural Model Index (SMI), RLX group showed a value closer to zero than SHAM group (P<0.05). Conclusions Raloxifene had a positive effect on the expression of osteoblastogenesis/mineralization-related proteins and on micro-CT parameters related to peri-implant bone healing.

Resorptive potential of impacted mandibular third molars: 3D simulation by finite element analysis.

OBJECTIVES: Previous studies have suggested a relationship between resorption in second molars and pressure from the eruptive force of the third molar. The aim of this study was to simulate functional forces in a mandible model by means of finite element analysis and then assess the biomechanical response produced by impacted third molars on the roots of the second molar. MATERIALS AND METHODS: A cone beam computed tomography scan presenting an impacted mandibular third molar was segmented (Mimics V17 software). The modeling process was performed using the reverse engineering technique provided by the Rhinoceros 3D 5.0 software. The third molar position was changed in order to produce different inclinations of the impacted tooth. Bite forces were simulated to evaluate total deformation, the equivalent von Mises stress, minimum principal stress on hard tissue, and equivalent elastic strain on soft tissue. RESULTS: Areas of high energy dissipation and compression stress were detected in the second molar root, independently of the inclination of the impacted third molar. In general, the horizontal position was the situation in which major stress and the amount of deformation occurred in the second and third molar regions. CONCLUSION: Impacted third molars in close proximity with the adjacent tooth can generate areas of compression concentrated at the site of contact, which suggests an involvement of mechanical factors in the triggering of resorption lesions. CLINICAL RELEVANCE: The results of these computational experiments contribute to the understanding of the triggering and progression of resorptive lesions in the adjacent second molar.

Raloxifene but not alendronate can compensate the impaired osseointegration in osteoporotic rats.

OBJECTIVES: Alendronate and raloxifene, a bisphosphonate and a selective estrogen modulator, respectively, are established osteoporosis therapies. Current evidence suggests that simultaneous application of osteoporosis therapies modulates osseointegration. However, alendronate shows inconsistent findings and raloxifene has not been studied comprehensively. This study aimed to evaluate the bone dynamics and molecular and microstructural features at the peri-implant bone interface in osteoporotic rats. MATERIALS AND METHODS: Thirty female rats underwent ovariectomy and were fed a diet low in calcium and phosphate and treated with alendronate or raloxifene for 30 days or underwent fictional ovariectomy surgery (SHAM) prior to implant insertion in the tibia; osteoporosis therapies continued thereafter. After 42 days, peri-implant bone was evaluated by histometric and micro-CT analysis. Fluorochrome incorporation and gene expression was determined to evaluate bone turnover. RESULTS: We report here that alendronate had no impact on bone-to-implant contacts and the mineral apposition rate. The RANKL/OPG ratio and local bone volume, however, were increased compared to the untreated osteoporotic rats. Even though signaling to bone resorption activity through RANKL production was observed in the alendronate group, the blockade of bone resorption activity that occurs in decorrence to alendronate activity took place and resulted in an increase in bone volume. Raloxifene significantly increased osseointegration in osteoporotic rats, as indicated by bone-to-implant contacts, mineral apposition, and local bone volume. Raloxifene, however, had no considerable impact on the RANKL/OPG ratio compared to untreated osteoporotic rats. As expected, the SH group showed higher bone-to-implant contacts and mineral apposition rates than the untreated osteoporotic rats. CONCLUSIONS: These findings suggest that raloxifene but not alendronate can compensate for the impaired osseointegration in osteoporotic rats. CLINICAL RELEVANCE: Regarding the superiority of raloxifene observed in the improvement of bone dynamics response, this statement suggests that raloxifene could be a good option for osteoporosis patients in oral rehabilitation procedures.

Alveolar bone healing in rats: micro-CT, immunohistochemical and molecular analysis

Abstract Alveolar bone healing after upper incisor extraction in rats is a classical model of preclinical studies. The underlying morphometric, cellular and molecular mechanism, however, remains imprecise in a unique study. Objectives The aim of this study was therefore to characterize the alveolar bone healing after upper incisor extraction in rats by micro computed tomographic (Micro-CT), immunohistochemical and real-time polymerase chain reaction (RT-PCR) analysis. Material and Methods Thirty animals (Rattus norvegicus, Albinus Wistar) were divided into three groups after upper incisors extraction at 7, 14, and 28 days. Micro-CT was evaluated based on the morphometric parameters. Subsequently, the histological analyses and immunostaining of osteoprotegerin (OPG), receptor activator of nuclear kappa B ligand (RANKL) and tartrate resistant acid phosphate (TRAP) was performed. In addition, RT-PCR analyses of OPG, RANKL, the runt-related transcription factor 2 (RUNX2), osteocalcin (OC), osteopontin (OPN), osterix (OST) and receptor activator of nuclear kappa B (RANK) were performed to determine the expression of these proteins in the alveolar bone healing. Results Micro-CT: The morphometric parameters of bone volume and trabecular thickness progressively increased over time. Consequently, a gradual decrease in trabecular separation, trabecular space and total bone porosity was observed. Immunohistochemical: There were no differences statistically significant between the positive labeling for OPG, RANKL and TRAP in the different periods. RT-PCR: At 28 days, there was a significant increase in OPG expression, while RANKL expression and the RANKL/OPG ratio both decreased over time. Conclusion Micro-CT showed the newly formed bone had favorable morphometric characteristics of quality and quantity. Beyond the RUNX2, OC, OPN, OST, and RANK proteins expressed in the alveolar bone healing, OPG and RANKL activity showed to be essential for activation of basic multicellular units during the alveolar bone healing.

A SERM increasing the expression of the osteoblastogenesis and mineralization-related proteins and improving quality of bone tissue in an experimental model of osteoporosis

Abstract Raloxifene is an antiresorptive drug, selective estrogen receptor modulator (SERM) used in the treatment of osteoporosis. Objective To evaluate proteins related to bone repair at the peri-implant bone in a rat model of osteoporosis treated with raloxifene. Material and Methods 72 rats were divided into three groups: SHAM (healthy animals), OVX (ovariectomized animals), and RLX (ovariectomized animals treated with raloxifene). Raloxifene was administered by gavage (1 mg/kg/day). Tibial implantation was performed 30 days after ovariectomy, and animals were euthanized at 14, 42, and 60 days postoperatively. Samples were collected and analyzed by immunohistochemical reactions, molecular analysis, and microtomographic parameters. Results RLX showed intense staining of all investigated proteins at both time points except for RUNX2. These results were similar to SHAM and opposite to OVX, showing mild staining. The PCR gene expression of OC and ALP values for RLX (P<0.05) followed by SHAM and OVX groups. For BSP data, the highest expression was observed in the RLX groups and the lowest expression was observed in the OVX groups (P<0.05). For RUNX2 data, RLX and SHAM groups showed greater values compared to OVX (P<0.05). At 60 days postoperatively, microtomography parameters, related to closed porosity, showed higher values for (Po.N), (Po.V), and (Po) in RLX and SHAM groups, whereas OVX groups showed lower results (P<0.05); (BV) values (P=0.009); regarding total porosity (Po.tot), RLX group had statistically significant lower values than OVX and SHAM groups (P=0.009). Regarding the open porosity (Po.V and Po), the SHAM group presented the highest values, followed by OVX and RLX groups (P<0.05). The Structural Model Index (SMI), RLX group showed a value closer to zero than SHAM group (P<0.05). Conclusions Raloxifene had a positive effect on the expression of osteoblastogenesis/mineralization-related proteins and on micro-CT parameters related to peri-implant bone healing.

Morphometric and histologic characterization of alveolar bone from hypertensive patients.

BACKGROUND: Hypertension is considered a risk factor in implant dentistry but the underlying reasons remain unclear. It may be that hypertension has a negative impact on the local bone quality. PURPOSE: Here we evaluated the structural and histological parameters of bone collected from hypertensive patients treated by antagonists of the renin-angiotensin system, and of bone collected from normotensive patients. MATERIAL AND METHODS: A total of 30 patients were referred for rehabilitation with dental implants to be placed in the posterior mandible. The first group were hypertensive patients treated with RAS antagonists. The second group were normotensive patients not taking medication. Bone biopsies collected during implant installation were subjected to analysis. Micro CT revealed the structural parameters. Histological analyses together with immunohistochemical staining of osteogenic markers were performed. RESULTS: The structural parameters of bone volume, trabecular thickness, trabecular number, separation of the trabecular, and total porosity were similar between the 2 groups (P > .05). The histological appearance of bone derived from hypertensive patients was normal. The staining pattern of Runx-2, osteopontin, and osteocalcin were comparable in both groups. CONCLUSIONS: These observations suggest that hypertensive patients treated with renin-angiotensin system antagonists have regular alveolar bone with respect to bone structure and histological parameters.

The effect of a hydroxyapatite impregnated PCL membrane in rat subcritical calvarial bone defects.

OBJECTIVE: The present study evaluated the effect of polymeric-nanofibers membranes impregnated with microparticulate hydroxyapatite (HA) in the subcritical calvarial bone defects (SCBD) healing. DESIGN: PCL membranes with and without HA were obtained by electrospinning. SCBD were perforated (3.3mm) in left and right sides of 36 rat calvarias. The right-side SBCD of 18 animals was filled with HA mixed with blood clot and blood clot at the contralateral side. The remaining animals received PCL+HA membrane at the right-side SCBD and PCL membrane at the contralateral side. Animals were killed after 30, 60 and 90days after surgery. Bone defect volume (in mm3) was measured by tomography (CBCT). Qualitative histological analysis and SBCD area (in mm2) were measured. Quantitative data were submitted to Kruskal-Wallis/Dunn tests. RESULTS: Reduction of SBCD volume was observed in all treatments but PCL. Association with HA significantly improved bone healing induced by PCL and blood clot. PCL+HA induced the lowest SBCD volume at 60 and 90days. Complete bone healing was not observed even at 90days in SCBD treated with blood clot. In every period, more bone formation was observed for SCBD treated with membranes. CONCLUSIONS: We concluded that both PCL membrane and HA were able to improve bone healing.

Computational Approach to Identify Different Injuries by Firearms.

Complications arise in the analysis of gunshot wounds to the maxillofacial region, when neither the projectile nor the gun is found at the crime scene. We simulated 5- and 15-cm firing distances at a human mandible to investigate the external morphology of entrance wounds based on fire range. The ammunition models, .40-caliber S&W, .380-caliber, and 9 × 19-mm Luger, were constructed with free-form NURBS surfaces. In a dynamic simulation, projectiles were fired against mandibular body 3D model at 5 and 15 cm. All entrance wounds presented oval aspect. Maximum diameter and von Mises stress values were 16.5 mm and 50.8 MPa, both for .40-caliber S&W fired at 5 cm. The maximum energy loss was 138.4 J for .40 S&W fired at 15 cm. In conclusion, the mandible was most affected by .40-caliber S&W and morphological differences were observable in holes caused by different incoming projectile calibers fired at different distances.

Association between Facial Type and Mandibular Canal Morphology - Analysis in Digital Panoramic Radiographs.

In this study we investigate the association between facial type and mandibular canal course morphology analysing this in digital panoramic radiographs images. We used 603 digital images from panoramic radiographs. We selected only panoramic radiographs of fully dentate individuals, who had all lower molars bilaterally and with complete root formation. The sample distribution was determined by facial type and sex. The course of the mandibular canal, as seen in the panoramic radiographs, was classified into 3 types, bilaterally. The classification used was: type 1 if the mandibular canal is in contact or is positioned at most 2 mm from the root apex of the three permanent molars; type 2 if the mandibular canal is located halfway between the root apex of the three permanent molars and a half away from the mandibular basis; and type 3 if the mandibular canal is in contact with or approaches, a maximum of 2 mm from the cortical bone of the mandibular basis. For results, the data were analyzed by Chi-square test (p<0.05). Data analysis (Chi-square) showed there were more canals type 2 (p=0.0012) and fewer canals type 1 (p=0.0336) in females than in males, without association with the facial types. In conclusion, the facial type does not associated with the mandibular canal course analyzed.

Review of In Vivo Bone Strain Studies and Finite Element Models of the Zygomatic Complex in Humans and Nonhuman Primates: Implications for Clinical Research and Practice.

The craniofacial skeleton is often described in the clinical literature as being comprised of vertical bony pillars, which transmit forces from the toothrow to the neurocranium as axial compressive stresses, reinforced transversely by buttresses. Here, we review the literature on bony microarchitecture, in vivo bone strain, and finite-element modeling of the facial skeleton of humans and nonhuman primates to address questions regarding the structural and functional existence of facial pillars and buttresses. Available bone material properties data do not support the existence of pillars and buttresses in humans or Sapajus apella. Deformation regimes in the zygomatic complex emphasize bending and shear, therefore conceptualizing the zygomatic complex of humans or nonhuman primates as a pillar obscures its patterns of stress, strain, and deformation. Human fossil relatives and chimpanzees exhibit strain regimes corroborating the existence of a canine-frontal pillar, but the notion of a zygomatic pillar has no support. The emerging consensus on patterns of strain and deformation in finite element models (FEMs) of the human facial skeleton corroborates hypotheses in the clinical literature regarding zygomatic complex function, and provide new insights into patterns of failure of titanium and resorbable plates in experimental studies. It is suggested that the "pillar and buttress" model of human craniofacial skeleton function be replaced with FEMs that more accurately and precisely represent in vivo function, and which can serve as the basis for future research into implants used in restoration of occlusal function and fracture repair. Anat Rec, 299:1753-1778, 2016. © 2016 Wiley Periodicals, Inc.

Association between Facial Type and Mandibular Canal Morphology - Analysis in Digital Panoramic Radiographs

Abstract In this study we investigate the association between facial type and mandibular canal course morphology analysing this in digital panoramic radiographs images. We used 603 digital images from panoramic radiographs. We selected only panoramic radiographs of fully dentate individuals, who had all lower molars bilaterally and with complete root formation. The sample distribution was determined by facial type and sex. The course of the mandibular canal, as seen in the panoramic radiographs, was classified into 3 types, bilaterally. The classification used was: type 1 if the mandibular canal is in contact or is positioned at most 2 mm from the root apex of the three permanent molars; type 2 if the mandibular canal is located halfway between the root apex of the three permanent molars and a half away from the mandibular basis; and type 3 if the mandibular canal is in contact with or approaches, a maximum of 2 mm from the cortical bone of the mandibular basis. For results, the data were analyzed by Chi-square test (p<0.05). Data analysis (Chi-square) showed there were more canals type 2 (p=0.0012) and fewer canals type 1 (p=0.0336) in females than in males, without association with the facial types. In conclusion, the facial type does not associated with the mandibular canal course analyzed.

Resumo Neste estudo investigamos a associação entre o tipo facial e o trajeto do canal mandibular por meio de análises em imagens de radiografia panorâmica digital. Foram utilizadas 603 imagens de radiografias panorâmicas digitais. Foram selecionadas apenas radiografias panorâmicas de indivíduos totalmente dentados, que apresentaram todos os dentes molares inferiores bilateralmente e com completa formação das raízes. A amostra foi determinada pelo tipo facial e pelo sexo. O trajeto do canal mandibular, avaliado nas radiografias panorâmicas, foi classificado em 3 tipos bilateralmente. A classificação usada foi: tipo 1 se o canal mandibular estiver em contato ou posicionado a no máximo 2 mm do ápice radicular dos 3 molares permanentes; tipo 2 se o canal mandibular estiver a meia distância do ápice radicular dos 3 molares permanentes e da base da mandíbula; e tipo 3 se o canal mandibular estiver em contato com ou posicionado a no máximo 2 mm do osso cortical da base da mandíbula. Para os resultados, os dados foram analisados pelo teste qui-quadrado (p<0,05). Os dados analisados (qui-quadrado) mostraram que existem mais canais do tipo 2 (p=0,0012) e menos canais tipo 1 (p=0,0336) em indivíduos femininos do que em masculinos, sem associação com os tipos faciais. Conclui-se que o tipo facial não está associado ao trajeto do canal mandibular.

Analysis of the frontal sinus morphology and the titanium plates shape in skull fracture for human identification / Análisis de la morfología del seno frontal y la forma de la placa de titanio en fractura de cráneo para la identificación humana

Human identification can be performed by several methods, as anatomical structures of the facial skeletal and individuals signals. The aim of this study was to report a case of human identification from the morphological evaluation of the frontal sinus and the presence of titanium plates in skull after examination of Postero Anterior (PA) radiographs ante and postmortem. In 2008 a skull was found on a highway. Later, an alleged victim was found , who disappeared in late 2007. The skull showed postmortem teeth lost, presence of round hole in the right supra-orbital region, consistent with lesion caused by gunshot. It was also noted the presence of a miniplate of bone fixation in the form of inverted "T" in several locations of the nasal bones and bone remodeling signals in the face. PA radiograph of the skull was performed for the purpose of comparison with the X-rays provided by antemortem family. By overlapping radiographic images, there was similarity between the characteristics presented by the skull and found the alleged victim, as the frontal sinus, shape and height of the orbits, and miniplate fixation of bone with the same shape and size, not leaving no doubt that the radiographs belong to the same individual.

La identificación humana puede realizarse por varios métodos, entre ellos a partir de estructuras anatómicas del esqueleto facial y del reconocimiento de señales individuales. El objetivo de este estudio fue reportar un caso de identificación humana mediante la evaluación morfológica del seno frontal y la presencia de placas de titanio en el cráneo después del examen con radiografías posteroanteriores (PA) ante y post mortem. En 2008, se encontró un cráneo en una carretera. Más tarde, se encontró una presunta víctima, que desapareció a finales de 2007. El cráneo mostró dientes perdidos post mortem, la presencia de un orificio redondeado en la región supraorbital derecha, en consonancia con lesiones causadas por arma de fuego. También se observó la presencia de una miniplaca de fijación ósea en forma de "T" invertida en varios lugares de los huesos nasales y señales de remodelación ósea en la cara. La radiografía posteroanterior del cráneo se realizó con el propósito de comparación con los rayos X antemortem proporcionados por la familia. Por superposición de imágenes radiográficas, hubo similitud entre las características que presentó el cráneo y las de la presunta víctima, ya que el seno frontal, la forma y la altura de las órbitas, y la fijación de la miniplaca de hueso presentaron la misma forma y tamaño, no dejando ninguna duda de que las radiografías pertenecían a la misma persona.