Biomimetic redox-responsive smart coatings with resistance-release functions for reverse osmosis membranes.

Membrane fouling induces catastrophic loss of separation performance and seriously restricts the applications of reverse osmosis (RO) membranes. Inspired by the mussel structure, polydopamine (PDA) and cystamine molecules (CA) with excellent anti-fouling properties were used to prepare accessible, biocompatible, and redox-responsive coatings for RO membranes. The PDA/CA-coated RO membranes exhibit a superior water flux of 65 L m-2 h-1 with a favourable NaCl rejection exceeding 99%. The water permeability through the PDA/CA-coated membrane is much higher than that of most membranes with similar rejection rates. Due to the formed protective hydration layers by PDA/CA coatings, anti-fouling properties against proteins, polysaccharides and surfactants were evaluated separately, and ultralow fouling properties were demonstrated. Moreover, the disulfide linkages in CA molecules can cleave in a reducing environment, yielding the degradation of PDA/CA coatings, thereby removing the foulants deposited on the coatings. The degradation endows the coated membranes with satisfying longtime anti-fouling properties, where the flux recovery reaches up to 90%. The construction of redox-responsive smart coatings not only provided a promising route to alleviate membrane fouling but can also be upscaled for use in numerous practical applications like sensors, medical devices, and drug delivery.

[The Factors Affecting Relapse in Pediatric B-cell Acute Lymphoblastic Leukemia Patients without Prognostic Fusion Genes Following Up for 10 years].

OBJECTIVE: To analyze the efficacy of children with B-cell acute lymphoblastic leukemia (B-ALL) without prognostic fusion genes treated by CCLG-ALL 2008, and investigate the related factors affecting the recurrence of the patients. METHODS: B-ALL patients without prognostic fusion genes treated by the protocol of CCLG-ALL 2008 in our hospital from March 2008 to December 2012 were retrospectively analyzed. Follow-up time was ended in August 31, 2019. The median follow-up time was 92 months (range 0-136 months). Kaplan-Meier was used to detect the RFS, and COX multivariate regression analysis was employed to identify the independent factors affecting the recurrence of the patients. RESULTS: There were 140 males and 99 females enrolled in this study. The ratio of male to female was 1.41∶1. The median age was 4.4 years old and the median number of WBC at initial stage was 4.98×109/L. There were 77 cases relapsed during the observation while 162 without relapsed, 16 cases lost to follow-up and 72 cases died. The recurrence and mortality rate was 32.22% and 30.1%, respectively, in which 45 cases died of recurrence (62.5% of the total deaths). Univariate analysis showed that the age≥6 years old, WBC >100×109/L, the bone marrow blasts on day 15≥25%, the bone marrow minimal residual disease (MRD) at week 12 >10-4, and the higher risk were the main factors affecting the recurrence of the patients (P<0.05). Multivariate COX regression analysis showed that age≥6 years old, WBC >100×109/L, bone marrow MRD >10-4 at the 12th week were the independent risk factors affecting recurrence of the patients. CONCLUSION: Age, initial WBC, and bone marrow MRD at the 12th week were correlated with recurrence in children with B-ALL without prognostic fusion genes, which can be used as prognostic indices of recurrence risk in clinical.

Temperature-adjustable F-carbon nanofiber/carbon fiber nanocomposite fibrous masks with excellent comfortability and anti-pathogen functionality.

Wearing surgical masks remains the most effective protective measure against COVID-19 before mass vaccination, but insufficient comfortability and low antibacterial/antiviral activities accelerate the replacement frequency of surgical masks, resulting in large amounts of medical waste. To solve this problem, we report new nanofiber membrane masks with outstanding comfortability and anti-pathogen functionality prepared using fluorinated carbon nanofibers/carbon fiber (F-CNFs/CF). This was used to replace commercial polypropylene (PP) nonwovens as the core layer of face masks. The through-plane and in-plane thermal conductivity of commercial PP nonwovens were only 0.12 and 0.20 W/m K, but the F-CNFs/CF nanofiber membranes reached 0.62 and 5.23 W/m K, which represent enhancements of 380% and 2523%, respectively. The surface temperature of the PP surgical masks was 23.9 ℃ when the wearing time was 15 min, while the F-CNFs/CF nanocomposite fibrous masks reached 27.3 ℃, displaying stronger heat dissipation. Moreover, the F-CNFs/CF nanofiber membranes displayed excellent electrical conductivity and produced a high-temperature layer that killed viruses and bacteria in the masks. The surface temperature of the F-CNFs/CF nanocomposite fibrous masks reached 69.2 ℃ after being connected to a portable power source for 60 s. Their antibacterial rates were 97.9% and 98.6% against E. coli and S. aureus, respectively, after being connected to a portable power source for 30 min.

[The Factors Related to Treatment Failure in Children with Acute Lymphoblastic Leukemia].

OBJECTIVE: To analyze the efficacy of CCLG-ALL-2008 protocol and the related factors of treatment failure in children with acute lymphoblastic leukemia (ALL). METHODS: The clinical data of 400 children newly-diagnosed ALL in Children's Hospital of Soochow University from March 1, 2008 to December 31, 2012 was retrospectively analyzed. All the children accepted CCLG-ALL-2008 protocol, and were followed-up until October 2019. The dates of relapse, death and causes of death were recorded. Treatment failure was defined as relapse, non-relapse death, and secondary tumor. RESULTS: Following-up for 10 years, there were 152 cases relapse or non-relapse death, the treatment failure rate was 38%, including 122 relapse (80.3%), 30 non-relapse deaths (19.7%) which included 7 cases (4 cases died of infection and 3 cases died of bleeding) died of treatment (23.3% of non-relapse deaths), 8 cases died of minimal residual disease (MRD) continuous positive (26.7% of non-relapse deaths) and 15 cases died of financial burden (50% of non-relapse deaths). According to the relapse stage, 37 cases (30%) in very early stage, 38 cases (31%) in early stage, and 47 cases (39%) in late stage, while according to the relapse site, 107 cases relapsed in bone marrow, 3 cases in testis, 3 cases in central nervous system (CNS), 5 cases in bone marrow plus testis and 4 cases in bone marrow plus CNS. Bone marrow relapse was the main cause of death in 89 cases, followed by nervous system. Initially diagnosed WBC count (≥50×109/L), T-cell immunophenotype, and MRD-positive at week 12 were the independent risk prognostic factors for relapse in children with ALL, while age (≥10 years), initially diagnosed WBC count (≥50×109/L), M3 bone marrow on day 15, and MRD-positive at week 12 were the independent risk factors due to treatment failure. No secondary tumors were found during the follow-up for 10 years. CONCLUSION: Relapse is the main cause of treatment failure in children with ALL. The initially diagnosed WBC count, immunophenotype and MRD at week 12 were the independent prognostic factors for relapse of the patients. Financial burden accounts for a large proportion of non-relapse death.

Highly thermally conductive and eco-friendly OH-h-BN/chitosan nanocomposites by constructing a honeycomb thermal network.

More than 110,000,000 tons of mismanaged plastics were to be produced in 2020. Polymers are favored in the preparation of thermally conductive materials due to their excellent comprehensive properties. However, most polymers fabricated for thermally conductive materials are difficult to degrade in the natural environment. To alleviate the increasingly severe environmental problems, we reported a novel eco-friendly material with high thermal conductivity, which was composited of chitosan microspheres (CSM) and hydroxyl-functionalized hexagonal boron nitride (OH-h-BN) nanoplatelets. Utilizing their significant difference in scales, the OH-h-BN nanoplatelets were arranged between each CSM. Their overall structure was similar to the honeycomb: CSM were honeycomb cores, and OH-h-BN nanoplatelets were honeycomb network. The routine-structure OH-h-BN/CS nanocomposites were only 0.94 ± 0.02 W·m-1·K-1 at 50 wt% in thermal conductivity. However, the OH-h-BN/CSM nanocomposites with honeycomb structure can reach 5.66 ± 0.32 W·m-1·K-1 in the same loading, for enhancement of 502% and 1914% than OH-h-BN/CS nanocomposites and pure CS, respectively.

Heat Conduction and Antibacterial Hexagonal Boron Nitride/Polypropylene Nanocomposite Fibrous Membranes for Face Masks with Long-Time Wearing Performance.

Wearing surgical masks is one of the best protective measures to protect humans from viral invasion during the 2019 coronavirus (COVID-19) outbreak. However, wearing surgical masks for extended periods will cause uncomfortable sweltering sense to users and are easy to breed bacteria. Here, we reported a novel fibrous membrane with outstanding comfortability and antibacterial activity prepared by PP ultrafine fiber nonwovens and antibacterial functionalized h-BN nanoparticles (QAC/h-BN). The thermal conductivity of commercial PP nonwovens was only 0.13 W m-1 K-1, but that of the QAC/h-BN/PP nanocomposite fibrous membranes can reach 0.88 W m-1 K-1, an enhancement of 706.5% than commercial PP nonwovens. The surface temperature of commercial PP surgical masks was 31.8 °C when the wearing time was 60 min. In contrast, QAC/h-BN/PP surgical masks can reach 33.6 °C at the same tested time, exhibiting stronger heat dissipation than commercial PP surgical masks. Besides, the antibacterial rates of QAC/h-BN/PP nanocomposite fibrous membranes were 99.3% for E. coli and 96.1% for S. aureus, and their antibacterial mechanism was based on "contact killing" without the release of unfavorable biocides. We think that the QAC/h-BN/PP nanocomposite fibrous membranes could provide better protection to people.

Preparation of Immobilized Lipase Based on Hollow Mesoporous Silica Spheres and Its Application in Ester Synthesis.

In this study, Candida rugosa lipase (CRL) was immobilized into modified hollow mesoporous silica (HMSS) materials with different hydrophobicity. Among propyl-(C3), phenyl-(C6), octyl-(C8), and octadecyl-(C18) modified HMSS as well as native HMSS, taking advantage of more hydrophobic microenvironment, the HMSS-C18-CRL showed exceptional performance in enzymatic esterification reaction. Using the novel HMSS-C18 with immobilized CRL (HMSS-C18-CRL), we investigated the esterification of phytosterols with polyunsaturated fat acid (PUFA) in a solvent-free system for the production of phytosterols esters. Response surface methodology (RSM) was applied to model and optimize the reaction conditions, namely, the enzyme load (5⁻25%), reaction time (10⁻110 min), molar ratio of α-linolenic acid (ALA)/phytosterols (1:1⁻7:1) and represented by the letters E, T, and M respectively. Best-fitting models were successfully established by multiple regressions with backward elimination. The optimum production was achieved at 70 min for reaction time, 20% based on the weight of substrate for enzyme loading, and 5.6:1 for ALA/phytosterols molar ratio. Under optimized conditions, a conversion of about 90 ± 2% was achieved. These results indicated that HMSS-C18-CRL demonstrates to be a promising catalyst and can be potentially applied in the functional lipid production.

[Degradation of nonylphenol in water by microorganisms immobilized on bamboo charcoal.] / ç«¹ç‚­å›ºå®šåŒ–å¾®ç”Ÿç‰©å¯¹æ°´ä¸­å£¬åŸºé šçš„é™è§£æ•ˆçŽ‡.

Bamboo charcoal is a high-quality biochar, with a large surface area, well-developed pores, and high mechanical strength. Therefore, it is one of the best choices of microbial immobilization carrier. In this study, the optimal preparation condition was examined for microorganisms immobilized on bamboo charcoal by the orthogonal test. The degradation effects of estrogen nonylphenol were compared between the bacteria immobilized on bamboo charcoal and free bacteria, and then feasibility of the reuse of immobilized bacteria was investigated. The results showed that lots of degrading bacteria could adhere to the surface and internal pores of bamboo charcoal. The optimum conditions for the preparation of immobilized microorganisms were as follows: 30 ℃, pH=7, 35-mesh bamboo charcoal. The degradation rate of nonylphenol was in good agreement with the first order kinetics equation. When the initial concentrations of nonylphenol were 30, 50, 80 and 100 mg·L-1, the degradation rates of nonylphenol of immobilized bacteria for seven days were 100%, 75.3%, 67.3% and 78.7%, respectively, which were significantly higher than those of free bacteria (54.2%, 51.5%, 30.6% and 23.5%). After eight rounds of reuse, the degradation rate for immobilized bacteria still reached as high as 36.5%, while it was only 8.9% for free bacteria. Our results indicated that the microorganisms immobilized on bamboo charcoal had long-term reusability, and thus had good prospects in the application of organic pollutants removal in wastewater.

Cellular mechanisms of a new pyrazinone compound that induces apoptosis in SKOV-3 cells.

We screened a small molecular library that was designed and independently synthesized in vitro and found a new drug (MY-03-01) that is active against ovarian cancer. We established that MY-03-01 effectively inhibited SKOV-3 cell survival in a dose-dependent manner, based on cell viability rates, and that it not only induced SKOV-3 apoptosis by itself, but also did so synergistically with paclitaxel. Secondly, when MY-03-01 was applied at 40 µM, its hemolytic activity was less than 10%, compared with the control, and there was almost no damage to normal cells at this concentration. In addition, we used DAPI staining and flow cytometry to show that MY- 03-01 could significantly induce apoptosis of SKOV-3 cells. Finally, we found that MY-03-01 likely induced SKOV-3 apoptosis by activating caspase3 and caspase9 through the mitochondrial pathway.