ABSTRACT
This study presents a novel approach by utilizing poly(vinylpyrrolidone)s (PVPs) with various topologies as potential matrices for the liquid crystalline (LC) active pharmaceutical ingredient itraconazole (ITZ). We examined amorphous solid dispersions (ASDs) composed of ITZ and (i) self-synthesized linear PVP, (ii) self-synthesized star-shaped PVP, and (iii) commercial linear PVP K30. Differential scanning calorimetry, X-ray diffraction, and broad-band dielectric spectroscopy were employed to get a comprehensive insight into the thermal and structural properties, as well as global and local molecular dynamics of ITZ-PVP systems. The primary objective was to assess the influence of PVPs' topology and the composition of ASD on the LC ordering, changes in the temperature of transitions between mesophases, the rate of their restoration, and finally the solubility of ITZ in the prepared ASDs. Our research clearly showed that regardless of the PVP type, both LC transitions, from smectic (Sm) to nematic (N) and from N to isotropic (I) phases, are effectively suppressed. Moreover, a significant difference in the miscibility of different PVPs with the investigated API was found. This phenomenon also affected the solubility of API, which was the greatest, up to 100 µg/mL in the case of starPVP 85:15 w/w mixture in comparison to neat crystalline API (5 µg/mL). Obtained data emphasize the crucial role of the polymer's topology in designing new pharmaceutical formulations.
Subject(s)
Calorimetry, Differential Scanning , Itraconazole , Liquid Crystals , Povidone , Solubility , X-Ray Diffraction , Itraconazole/chemistry , Liquid Crystals/chemistry , Povidone/chemistry , Calorimetry, Differential Scanning/methods , X-Ray Diffraction/methods , Polymers/chemistry , Antifungal Agents/chemistry , Drug Compounding/methods , Crystallization , Chemistry, Pharmaceutical/methodsABSTRACT
Molecular dynamics and transport coefficients change significantly around the so-called Arrhenius crossover in glass-forming systems. In this article, we revisit the dynamic processes occurring in a glass-forming macrocyclic crown thiaether MeBzS2O above its glass transition, revealing two crossover temperatures: TB at 309 and TA at 333 K. We identify the second one as the Arrhenius crossover that is closely related to the normal-to-supercooled liquid transition in this compound. We show that the transformation occurring at this point goes far beyond molecular dynamics (where the temperature dependence of structural relaxation times changes its character from activation-like to super-Arrhenius), being reflected also in the internal structure and diffraction pattern. In this respect, we found a twofold local organization of the nearest-neighbor molecules via weak van der Waals forces, without the formation of any medium-range order or mesophases. The nearest surrounding of each molecule evolves structurally in time due to the ongoing fast conformational changes. We identify several conformers of MeBzS2O, demonstrating that its lowest-energy conformation is preferred mainly at lower temperatures, i.e., in the supercooled liquid state. Its increased prevalence modifies locally the short-range intermolecular order and promotes vitrification. Consequently, we indicate that the Arrhenius transition is fuelled rather by conformational changes in this glass-forming macrocyclic crown thiaether, which is a different scenario from the so-far existing concepts. Our studies combine broadband dielectric spectroscopy (BDS), X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, molecular dynamics (MD) simulations, and density functional theory (DFT) calculations.
ABSTRACT
In this paper, X-ray diffraction (XRD), differential scanning calorimetry (DSC), broadband dielectric (BDS), and Fourier transform infrared (FTIR) spectroscopy supported by molecular dynamics (MD) simulations and quantum chemical computations were applied to investigate the structural and thermal properties, molecular dynamics, and H-bonding pattern of R-, S-, and RS-flurbiprofen (FLP). Experimental data indicated various spatial molecular arrangements in crystalline forms of examined systems, which seemed to disappear in the liquid state. Surprisingly, deeper analysis of high-pressure dielectric data revealed unexpected variation in the activation volume of pure enantiomers and a racemate. MD simulations showed that it is an effect of the clusterization phenomenon and a higher population of small associates in the former samples. Moreover, theoretical consideration exposed the particular role of unspecific F-Π interactions as a driving force underlying local molecular arrangements of molecules in the liquid and the crystal lattice of R-, S-, and RS-FLP.
ABSTRACT
This study examined the clustering behavior of monohydroxy alcohols, where hydrogen-bonded clusters of up to a hundred molecules on the nanoscale can form. By performing X-ray diffraction experiments at different temperatures and under high pressure, we investigated how these conditions affect the ability of alcohols to form clusters. The pioneering high-pressure experiment performed on liquid alcohols contributes to the emerging knowledge in this field. Implementation of molecular dynamics simulations yielded excellent agreement with the experimental results, enabling the analysis of theoretical models. Here we show that at the same global density achieved either by alteration of pressure or temperature, the local aggregation of molecules at the nanoscale may significantly differ. Surprisingly, high pressure not only promotes the formation of hydrogen-bonded clusters but also induces the serious reorganization of molecules. This research represents a milestone in understanding association under extreme thermodynamic conditions in other hydrogen bonding systems such as water.
ABSTRACT
In this paper, we propose one-step synthetic strategies for obtaining well-defined linear and star-shaped polyvinylpyrrolidone (linPVP and starPVP). The produced macromolecules and a commercial PVP K30 with linear topology were investigated as potential matrices for suppressing metronidazole (MTZ) crystallization. Interestingly, during the formation of binary mixtures (BMs) containing different polymers and MTZ, we found that linear PVPs exhibit maximum miscibility with the drug at a 50:50 weight ratio (w/w), while the star-shaped polymer mixes with MTZ even at a 30:70 w/w. To explain these observations, comprehensive studies of MTZ-PVP formulations with various contents of both components were performed using Fourier-transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction. The obtained results clearly showed that the polymer's topology plays a significant role in the type of interactions occurring between the matrix and MTZ. Additionally, we established that for MTZ-PVP 50:50 and 75:25 w/w BMs, linear polymers have the most substantial impact on inhibiting the crystallization of API. The star-shaped macromolecule turned out to be the least effective in stabilizing amorphous MTZ at these polymer concentrations. Nevertheless, long-term structural investigations of the MTZ-starPVP 30:70 w/w system (which is not achievable for linear PVPs) demonstrated its complete amorphousness for over one month.
ABSTRACT
The behavior of hydrogen bonds under extreme pressure is still not well understood. Until now, the shift of the stretching vibration band of the X-H group (X = the donor atom) in infrared spectra has been attributed to the variation in the length of the covalent X-H bond. Herein, we combined infrared spectroscopy and X-ray diffraction experimental studies of two H-bonded liquid hexane derivatives, i.e., 2-ethyl-1-hexanol and 2-ethyl-1-hexylamine, in diamond anvil cells at pressures up to the GPa level, with molecular dynamics simulations covering similar thermodynamic conditions. Our findings revealed that the observed changes in the X-H stretching vibration bands under compression are not primarily due to H-bond shortening resulting from increased density but mainly due to cooperative enhancement of H-bonds caused by intensified molecular clustering. This sheds new light on the nature of H-bond interactions and the structure of liquid molecular systems under compression.
ABSTRACT
A series of four alcohols, n-propanol and its halogen (Cl, Br, and I) derivatives, were selected to study the effects of variation in polarity and halogen-driven interactions on the hydrogen bonding pattern and supramolecular structure by means of experimental and theoretical methods. It was demonstrated on both grounds that the average strength of H-bonds remains the same but dissociation enthalpy, the size of molecular nanoassemblies, as well as long-range correlations between dipoles vary with the molecular weight of halogen atom. Further molecular dynamics simulations indicated that it is connected to the variation in the molecular order introduced by specific halogen-based hydrogen bonds and halogen-halogen interactions. Our results also provided important experimental evidence supporting the assumption of the transient chain model on the molecular origin of the structural process in self-assembling alcohols.
ABSTRACT
The enhancement of the properties (i.e., poor solubility and low bioavailability) of currently available active pharmaceutical ingredients (APIs) is one of the major goals of modern pharmaceutical sciences. Among different strategies, a novel and innovative route to reach this milestone seems to be the application of nanotechnology, especially the incorporation of APIs into porous membranes composed of pores of nanometric size and made of nontoxic materials. Therefore, in this work, taking the antipsychotic API aripiprazole (APZ) infiltrated into various types of mesoporous matrices (anodic aluminum oxide, native, and silanized silica) characterized by similar pore diameters (d = 8-10 nm) as an example, we showed the advantage of incorporated systems in comparison to the bulk substance considering the crystallization kinetics, molecular dynamics, and physical stability. Calorimetric investigations supported by the temperature-dependent X-ray diffraction measurements revealed that in the bulk system the recrystallization of polymorph III, which next is converted to the mixture of forms IV and I, is visible, while in the case of confined samples polymorphic forms I and III of APZ are produced upon heating of the molten API with different rates. Importantly, the two-step crystallization observed in thermograms obtained for the API infiltrated into native silica templates may suggest crystal formation by the interfacial and core molecules. Furthermore, dielectric studies enabled us to conclude that there is no trace of crystallization of spatially restricted API during one month of storage at T = 298 K. Finally, we found that in contrast to the crystalline and amorphous bulk samples, all examined confined systems show a logarithmic increase in API dissolution over time (very close to a prolonged release effect) without any sign of precipitation. Our data demonstrated that mesoporous matrices appear to be interesting candidates as carriers for unstable amorphous APIs, like APZ. In addition to protecting them against crystallization, they can provide the desired prolonged release effect, which may increase the drug concentration in the blood (resulting in higher bioavailability). We believe that the "nanostructirization" in terms of the application of porous membranes as a novel generation of drug carriers might open unique perspectives in the further development of drugs characterized by prolonged release.
Subject(s)
Drug Carriers , Silicon Dioxide , Aripiprazole , Solubility , Crystallization , Drug Carriers/chemistry , Silicon Dioxide/chemistry , Pharmaceutical PreparationsABSTRACT
Molecular dynamics simulations supported by x-ray-diffraction experimental data were utilized to demonstrate how replacing the cyclic ring with the phenyl one in molecules of alcohols significantly differentiates their nanostructure by reducing the number of H-bonded clusters. Besides, molecules in the phenyl alcohols associate themselves in clusters via phenyl ring organization which likely is the result of OHâ¯π and πâ¯π interactions. Thus, at room temperature, the supramolecular structure of phenyl alcohols is more heterogeneous and governed by the formation of various clusters arising due to three types of interactions, while in cyclic alcohols, the H bonding controls the association of molecules. We believe that our methodology could be applied to better understand the fundamental process of association via H bonding and the competitive aggregation caused by phenyl rings.
ABSTRACT
In this paper, several experimental techniques, i.e., differential scanning calorimetry, X-ray diffraction, Fourier transform infrared, Raman, and broadband dielectric spectroscopy were applied to study the nature of the phase transitions in 1-adamantylamine (1-NH2-ADM, C10H17N) and 1-adamantanol (1-OH-ADM, C10H16O). Calorimetric measurements showed one and three endothermic peaks in thermograms for the latter and the former substance, respectively. Indeed, results of spectroscopic investigations indicated that the observed thermal events in 1-NH2-ADM correspond to transitions between various plastic crystal (PC) phases (I, II, III, IV), while the endothermic process in 1-OH-ADM can be assigned to a phase transition between the PC and the ordinary crystal (OC). Especially interesting were the outcomes of dielectric studies carried out both at ambient and high-pressure conditions, during heating and cooling cycles. They showed: i) noticeable changes in the frequency dependencies of the imaginary (ε'') and real (ε') parts of the complex dielectric permittivity that occurred around temperatures of the characteristic endothermic events detected by the calorimetry, and ii) significant fluctuations of ε'' and ε' at pressures attributed to the respective phase transitions. Moreover, the pressure coefficients of the phase transition temperatures were estimated to be approximately equal to 0.2 K/MPa for both compounds. In turn, volume variation (ΔV) at the PC (II)-PC (III) and PC (III)-PC (IV) transition temperatures for 1-NH2-ADM was essentially different than ΔV for the PC-OC transition in 1-OH-ADM.
ABSTRACT
In this paper, thermal properties, atomic-scale structure, and molecular dynamics (at ambient and high pressure) of native melatonin (MLT) and its partially-deuterated derivative (MLT-d2) have been investigated. Based on infrared spectroscopy, it was shown that treating MLT with D2O causes the replacement of hydrogen atoms attached to the nitrogen by deuterium. The degree of such substitution was very high (> 99%) and the deuterated sample remained stable after exposure to the air as well as during the melting and vitrification processes. Further calorimetric studies revealed the appearance of a peculiar thermal event before the melting of crystalline MLT-d2, which was assigned by the X-ray diffraction to a local negative thermal expansion of the unit cell. Finally, the high-pressure dielectric experiments indicated a few interesting findings, including the variation in the shape of the structural relaxation peak during compression, the difference in the pressure evolution of the glass transition temperature, and the temperature dependence of activation volume for both MLT species. The variations in these parameters manifest a different impact of the compression/densification on the dynamics of hydrogen and deuterium bonds in the native and partially-deuterated MLT, respectively.
Subject(s)
Melatonin , Deuterium , Temperature , Transition Temperature , X-Ray DiffractionABSTRACT
The nature of H-bonding interactions is still far from being understood despite intense experimental and theoretical studies on this subject carried out by the leading research centers. In this paper, by a combination of unique high-pressure infrared, dielectric and volumetric data, the intramolecular dynamics of hydroxyl moieties (which provides direct information about H-bonds) was studied along various isolines, i.e., isotherms, isobars, isochrones, and isochores, in a simple monohydroxy alcohol (2-ethyl-1-hexanol). This allowed us to discover that the temperature controls the intermolecular hydrogen bonds, which then affect the intramolecular dynamics of OH units. Although the role of density fluctuations gets stronger as temperature rises. We also demonstrated a clear connection between the intra- and intermolecular dynamics of the associating liquid at high pressure. The data reported herein open a new perspective to explore this important aspect of the glass transition phenomenon and understand H-bonding interactions at varying thermodynamic conditions.
Subject(s)
Hexanols , Hydrogen Bonding , Pyrrolizidine Alkaloids , TemperatureABSTRACT
Modified oligosaccharides with cyclic topology seem to be promising excipients for the preparation of Amorphous Solid Dispersions (ASDs), especially with those Active Pharmaceutical Ingredients (APIs), which have a strong crystallization tendency from the amorphous/glassy state. Herein, the usefulness of two acetylated cyclodextrins (ac-α-CD and ac-ß-CD) with various molecular weights (Mw) as stabilizers for the supercooled metronidazole (Met) has been discussed. X-ray diffraction (XRD) studies carried out on Met-acCDs mixtures (prepared in molar ratios from 1:2 to 5:1) showed that the system with ac-α-CD containing the highest amount of API (5:1 m/m) crystallizes immediately after preparation, whereas all Met-ac-ß-CD ASDs remain stable. What is more, long-term XRD measurements confirmed that the Met-ac-α-CD 2:1 m/m system crystallizes after 100 days of storage in contrast to the same system containing ac-ß-CD. The non-isothermal calorimetric data revealed that the activation barrier for crystallization (Ecr) in ASDs with the oligosaccharide having a greater Mw (i.e., composed of seven acGLU molecules) is slightly higher. Finally, to explain the differences in behavior between the mixtures with both acCDs, infrared studies, DFT calculations and Molecular Dynamics simulations were performed. All methods excluded the scenario of API incorporation inside the acCDs' core. On the other hand, obtained results suggested that in comparison to ac-α-CD, the greater amount of Met molecules might be bounded on the outside surface of ac-ß-CD. Therefore, this modified saccharide is a better stabilizer of the examined API.
Subject(s)
Cyclodextrins , Metronidazole , Calorimetry, Differential Scanning , Crystallization/methods , Drug Stability , Excipients/chemistry , Solubility , X-Ray DiffractionABSTRACT
We study the molecular origin of a prepeak (PP) observed at low q values in the structure factors of three oligomers in a bulk (poly(mercaptopropyl)methylsiloxane, PMMS, poly(methylmercaptopropyl)-grafted-hexylmethacrylate, PMMS-g-HMA, and poly(methylphenyl)siloxane, PMPS) in order to understand the lowering of the PP intensity detected for oligomers confined in cylindrical pores with low diameter. For this purpose, we use a combination of X-ray diffraction measurements and coarse-grained bead-spring molecular dynamics simulations. Our molecular modelling demonstrated that the planarity of the pendant groups triggers the self-association of oligomers into nanoaggregates. However, the formation of oligomeric nanodomains is not sufficient for building-up the PP. The latter requires spatial disturbance in the arrangement of the side groups of oligomers within clusters. Importantly, our numerical analysis revealed that the increasing degree of the confinement of oligomers limits their aggregation and consequently lowers the amplitude of the PP observed in the experimental data.
ABSTRACT
Classical molecular dynamics (MD) and x-ray diffraction (XRD) have been used to establish the origin of the paracrystalline structure of silver nanoparticles at the atomic scale. Models based on the face-centred cubic structure have been computer generated and their atomic arrangements have been optimized by the MD with the embedded-atom model (EAM) potential and its modified version (MEAM). The simulation results are compared with the experimental XRD data in reciprocal and real spaces, i.e. the structure factor and the pair distribution function. The applied approach returns the structural models, defined by the Cartesian coordinates of the constituent atoms. It has been found that most of the structural features of Ag nanoparticles are better reproduced by the MEAM. The presence of vacancy defects in the structure of the Ag nanoparticles has been considered and the average concentration of vacancies is estimated to be 3 at.%. The average nearest-neighbour Ag-Ag distances and the coordination numbers are determined and compared with the values predicted for the bulk Ag, demonstrating a different degree of structural disorder on the surface and in the core, compared to the bulk crystalline counterpart. It has been shown that the paracrystalline structure of the Ag nanoparticles has origin in the surface disorder and the disorder generated by the presence of the vacancy defects. Both sources lead to network distortion that propagates proportionally to the square root of the interatomic distances.
ABSTRACT
Wide-angle X-ray scattering patterns were recorded for a series of aliphatic butanol isomers (n-, iso-, sec-, tert-butanol) and their phenyl derivatives (4-phenyl-1-butanol, 2-methyl-3-phenyl-1-propanol, 4-phenyl-2-butanol, and 2-methyl-1-phenyl-2-propanol, respectively) to determine their atomic-scale structure with particular emphasis on the formation of supramolecular clusters. In addition, molecular dynamics simulations were carried out and yielded good agreement with experimental data. The combination of experimental and theoretical results allowed clarification of the origin of the pre-peak appearing at low scattering angles for the aliphatic butanols and its absence for their phenyl counterparts. It was demonstrated that the location of the hydroxyl group in the molecule of alkyl butanol, its geometry, and rigidity determine the morphology of the supramolecular clusters, while the addition of the aromatic moiety causes more disordered organization of molecules. The phenyl group significantly decreases the number of hydrogen bonds and size of the supramolecular clusters formed via the O-H···O scheme. The lower association ability of phenyl alcohols via H-bonds is additionally attenuated by the appearance of competing π-π configurations evidenced by the structural models.
ABSTRACT
Glass-forming ability is one of the most desired properties of organic compounds dedicated to optoelectronic applications. Therefore, finding general structure-property relationships and other rules governing vitrification and related near-glass-transition phenomena is a burning issue for numerous compound families, such as Schiff bases. Hence, we employ differential scanning calorimetry, broadband dielectric spectroscopy, X-ray diffraction and quantum density functional theory calculations to investigate near-glass-transition phenomena, as well as ambient- and high-pressure molecular dynamics for two structurally related Schiff bases belonging to the family of glycine imino esters. Firstly, the surprising great stability of the supercooled liquid phase is shown for these compounds, also under high-pressure conditions. Secondly, atypical self-organization via bifurcated hydrogen bonds into lasting centrosymmetric dimers is proven. Finally, by comparing the obtained results with the previous report, some general rules that govern ambient- and high-pressure molecular dynamics and near-glass transition phenomena are derived for the family of glycine imino esters. Particularly, we derive a mathematical formula to predict and tune their glass transition temperature (Tg) and its pressure coefficient (dTg/dp). We also show that, surprisingly, despite the presence of intra- and intermolecular hydrogen bonds, van der Waals and dipole-dipole interactions are the main forces governing molecular dynamics and dielectric properties of glycine imino esters.
Subject(s)
Schiff Bases , Vitrification , Calorimetry, Differential Scanning , Glycine , Transition TemperatureABSTRACT
Additive manufacturing technologies are considered as a potential way to support individualized pharmacotherapy due to the possibility of the production of small batches of customized tablets characterized by complex structures. We designed five different shapes and analyzed the effect of the surface/mass ratio, the influence of excipients, and storage conditions on the disintegration time of tablets printed using the fused deposition modeling method. As model pharmaceutical active ingredients (APIs), we used paracetamol and domperidone, characterized by different thermal properties, classified into the various Biopharmaceutical Classification System groups. We found that the high surface/mass ratio of the designed tablet shapes together with the addition of mannitol and controlled humidity storage conditions turned out to be crucial for fast tablet's disintegration. As a result, mean disintegration time was reduced from 5 min 46 s to 2 min 22 s, and from 11 min 43 s to 2 min 25 s for paracetamol- and domperidone-loaded tablets, respectively, fulfilling the European Pharmacopeia requirement for orodispersible tablets (ODTs). The tablet's immediate release characteristics were confirmed during the dissolution study: over 80% of APIs were released from printlets within 15 min. Thus, this study proved the possibility of using fused deposition modeling for the preparation of ODTs.
ABSTRACT
In this paper, several experimental techniques [X-ray diffraction, differential scanning calorimetry (DSC), thermogravimetry, Fourier transform infrared spectroscopy, and broad-band dielectric spectroscopy] have been applied to characterize the structural and thermal properties, H-bonding pattern, and molecular dynamics of amorphous bosentan (BOS) obtained by vitrification and cryomilling of the monohydrate crystalline form of this drug. Samples prepared by these two methods were found to be similar with regard to their internal structure, H-bonding scheme, and structural (α) dynamics in the supercooled liquid state. However, based on the analysis of α-relaxation times (dielectric measurements) predicted for temperatures below the glass-transition temperature (Tg), as well as DSC thermograms, it was concluded that the cryoground sample is more aged (and probably more physically stable) compared to the vitrified one. Interestingly, such differences in physical properties turned out to be reflected in the lower intrinsic dissolution rate of BOS obtained by cryomilling (in the first 15 min of dissolution test) in comparison to the vitrified drug. Furthermore, we showed that cryogrinding of the crystalline BOS monohydrate leads to the formation of a nearly anhydrous amorphous sample. This finding, different from that reported by Megarry et al. [ Carbohydr. Res. 2011, 346, 1061-1064] for trehalose (TRE), was revealed on the basis of infrared and thermal measurements. Finally, two various hypotheses explaining water removal upon cryomilling have been discussed in the manuscript.
Subject(s)
Bosentan/chemistry , Calorimetry, Differential Scanning , Dielectric Spectroscopy , Drug Liberation , Spectroscopy, Fourier Transform Infrared , Thermogravimetry , Vitrification , X-Ray DiffractionABSTRACT
Preparation and detailed structural characterization of iron-nickel wire-like nanochains with Fe0.75Ni0.25, Fe0.50Ni0.50, and Fe0.25Ni0.75 compositions are reported. The investigated nanomaterials were produced by the novel template-free magnetic-field-induced reduction reaction with NaBH4 as the reducing agent. It is demonstrated that this method leads to the formation of Fe-Ni nanochains composed of spherical nanoparticles with an average diameter of 50-70 nm and with a very high degree of atomic disorder manifested as the lack of clearly developed bcc and fcc phases, which are usually observed for nano- and polycrystalline Fe-Ni species. The recorded wide-angle X-ray scattering data for the obtained Fe-Ni nanochains exhibit a strong resemblance to those obtained for bulk metallic glasses. The atomic scale structure of the investigated nanochains has been studied using pair distribution function analysis of the recorded total scattering data. The best fits to the experimental pair distribution functions have been achieved assuming two-phase models of hcp and bcc networks with the size of coherently scattering regions of about 2.5 nm in diameter, for each Fe-Ni composition. The transmission electron microscopy images indicate that the glass-like bimetallic alloy cores are covered by amorphous oxide/hydroxide shells with their thickness ranging from 2 to 5 nm. Moreover, electron energy loss spectroscopy, X-ray photoelectron spectroscopy, and Mössbauer spectroscopy results confirm the core-shell structure of the Fe-Ni nanochains and the complex character of the shell layer which consists of several iron- and nickel-containing phases.