Funnel Devices Based on Asymmetrically Strained Transition Metal Dichalcogenides.

The strain applied to transition metal dichalcogenides (TMDs) reduces their energy bandgap, and local strains result in a funnel-like band structure in which funneled excitons move toward the most strained region. Herein, a funnel device based on asymmetrically strained WS2 and MoS2 is reported. Asymmetric strains are induced by transferring the TMD flakes onto a fork-shaped SU-8 microstructure. Raman and photoluminescence spectra peaks are shifted according to the morphology of the SU-8 microstructure, indicating the application of asymmetric strains to the TMDs. To investigate whether funneled excitons can be converted to electrical currents, various devices are constructed by depositing symmetric and asymmetric electrodes onto the strained TMDs. The scanning photocurrent mapping images follow a fork-shaped pattern, indicating probable conversion of the funneled excitons into electrical currents. In the case of the funnel devices with asymmetric Au and Al electrodes, short-circuit current (ISC ) of WS2 is enhanced by the strains, whereas ISC of MoS2 is suppressed because the Schottky barrier lowers with increasing strain for the MoS2 . These results demonstrate that the funnel devices can be implemented using asymmetrically strained TMDs and the effect of strains on the Schottky barrier is dependent on the TMD used.

Achieving a high photon count rate in digital time-correlated single photon counting using a hybrid photodetector.

We report an enhanced photon count rate in a digitally implemented time-correlated single-photon counting (TCSPC) system by utilizing a hybrid photodetector (HPD). In our digital TCSPC scheme, the photoelectronic responses from a single photon-sensitive photodetector are digitally analyzed through a high-speed analog-to-digital convertor (ADC). By virtue of the HPD which provides nearly a constant signal gain, the single-photon pulses can be effectively distinguished from pulses of simultaneously detected multiple photons by the pulse heights. Consequently, our digital TCSPC system can selectively collect single-photon signals even in the presence of intense multi-photon detections with its temporal accuracy not to be compromised. In our experiment of fluorescence lifetime measurement, the maximum count rate of single photons nearly reached the theoretical limit given by the Poisson statistics. This demonstrated that the digital TCSPC combined with the HPD provides an ultimate solution for the TCSPC implementation for high photon count rates.

Comparative study on resolution enhancements in fluorescence-structured illumination Fresnel incoherent correlation holography.

Fresnel incoherent correlation holography (FINCH) is a new approach for incoherent holography, which also has enhancement in the transverse resolution. Structured illumination microscopy (SIM) is another promising super-resolution technique. SI-FINCH, the combination of SIM and FINCH, has been demonstrated lately for scattering objects. In this study, we extended the application of SI-FINCH toward fluorescent microscopy. We have built a versatile multimodal microscopy system that can obtain images of four different imaging schemes: conventional fluorescence microscopy, FINCH, SIM, and SI-FINCH. Resolution enhancements were demonstrated by comparing the point spread functions (PSFs) of the four different imaging systems by using fluorescence beads of 1-µm diameter.

Large field-of-view nanometer-sectioning microscopy by using metal-induced energy transfer and biexponential lifetime analysis.

Total internal reflection fluorescence (TIRF) microscopy, which has about 100-nm axial excitation depth, is the method of choice for nanometer-sectioning imaging for decades. Lately, several new imaging techniques, such as variable angle TIRF microscopy, supercritical-angle fluorescence microscopy, and metal-induced energy transfer imaging, have been proposed to enhance the axial resolution of TIRF. However, all of these methods use high numerical aperture (NA) objectives, and measured images inevitably have small field-of-views (FOVs). Small-FOV can be a serious limitation when multiple cells need to be observed. We propose large-FOV nanometer-sectioning microscopy, which breaks the complementary relations between the depth of focus and axial sectioning by using MIET. Large-FOV imaging is achieved with a low-magnification objective, while nanometer-sectioning is realized utilizing metal-induced energy transfer and biexponential fluorescence lifetime analysis. The feasibility of our proposed method was demonstrated by imaging nanometer-scale distances between the basal membrane of human aortic endothelial cells and a substrate.

Compact single-shot four-wavelength quantitative phase microscopy with polarization- and frequency-division demultiplexing.

We present a novel single-shot four-wavelength quantitative phase microscopy (FW-QPM). Four lasers operating at different wavelengths are multiplexed with a pair of dichroic mirrors and a polarization beam splitter in a three-mirror quasi-common-path interferometer. After a single-shot interference pattern is obtained with a monochrome camera, four holograms of different wavelengths were demultiplexed from it in the frequency domain with polarization- and frequency-division multiplexing. Polarization-division demultiplexing scheme uses polarization dependent visibility changes in an interference pattern, and it plays a critical role in making only two interference patterns exist within a single quadrant in the frequency domain. We have used a single-mode optical fiber as a phase object sample and demonstrated that a measured single-shot interference pattern can be successfully demultiplexed into four different interferograms of different wavelengths with our proposed scheme.

Selective Detection of Single-Stranded DNA Molecules Using a Glass Nanocapillary Functionalized with DNA.

We describe glass nanocapillaries with single-stranded DNA molecules (ssDNA) covalently attached to the capillary surface. These DNA-functionalized nanocapillaries selectively facilitate the translocation of target ssDNA that is complementary to the probe ssDNA. In addition, the complementary target ssDNA exhibits an event duration time longer than that of the noncomplementary target ssDNA. The temperature dependence measurements of translocation events show that the longer duration time is a result of an interaction between probe and target ssDNA and is dependent on the base pair binding strength. These results demonstrate that single-base mismatch transport selectivity can be achieved using the DNA-functionalized nanocapillaries.

Double-field-of-view, quasi-common-path interferometer using Fourier domain multiplexing.

We present a quasi-common-path interferometer with a double field of view (FOV). The laser beam of an imaging system is separated into three parts using three mirrors; the first and second beams are used to image two different areas of a sample, while the third beam functions as a reference beam. The reference beam is prepared by making clear area in a sample and projecting it on an image sensor. A double FOV is obtained by Fourier domain multiplexing, whereby two interferometric images corresponding to two different areas of a sample are modulated with two different spatial carrier frequencies. The feasibility of this technique is experimentally demonstrated by imaging two different areas of a test target with a single image sensor.

Large step-phase measurement by a reduced-phase triple-illumination interferometer.

We present a reduced-phase triple-illumination interferometer (RPTII) as a novel single-shot technique to increase the precision of dual-illumination optical phase unwrapping techniques. The technique employs two measurement ranges to record both low-precision unwrapped and high-precision wrapped phases. To unwrap the high-precision phase, a hierarchical optical phase unwrapping algorithm is used with the low-precision unwrapped phase. The feasibility of this technique is demonstrated by measuring a stepped object with a height 2100 times greater than the wavelength of the source. The phase is reconstructed without applying any numerical unwrapping algorithms, and its noise level is decreased by a factor of ten.

Optimum phase shift for quantitative phase microscopy in volume measurement.

Volume measurement of a phase object is one of the most distinctive capabilities of quantitative phase microscopy (QPM). However, the accuracy of a measured volume is limited by the different noises of a measurement system and the finite bandpass filter used in the phase extraction algorithm. In this paper, we analyze the inherent errors in volume measurement with QPM and propose the optimum condition that can minimize these errors. We find that phase information of a sample in the frequency domain nonlinearly oscillates as a function of the phase shift corresponding to the sample and its medium, and that the phase information of a sample inside the bandpass filter can be maximized by a proper phase shift. Through numerical simulations and actual experiments, we demonstrate that the error in phase volume measurement can be effectively reduced by the enhancement of the phase signal inside the bandpass region using an optimum amount of phase, which can be controlled by changing either the medium index or the wavelength of illumination.

Reduced-phase dual-illumination interferometer for measuring large stepped objects.

We present a reduced-phase dual-illumination interferometer (RPDII) that measures the topography of a sample with large step height variation. We experimentally demonstrate the basic principle and the feasibility of this novel single-shot quantitative phase imaging. Two beams of this interferometer illuminate a sample at different incident angles, and two phases of the different incident angles and their phase difference are simultaneously recorded using three spatial frequencies. The relative phase difference between two beams of an RPDII can be controlled by adjusting the angle such that the maximum phase difference is smaller than 2π, and thus there is no phase wrapping ambiguity in the reconstructed phase. One 4f optical system with a transmission grating is used to illuminate the sample with two collimated beams incident at different angles. The feasibility of this technique is demonstrated by measuring the thicknesses of two stepped metal layers with heights of 150 and 660 µm. Although the change in stepped height is more than 1000 times the wavelength of the laser used in our interferometer, the thicknesses of these two metal layers are successfully obtained without the use of an unwrapping algorithm.

Dual-wavelength diffraction phase microscopy for simultaneous measurement of refractive index and thickness.

We present a quantitative phase microscopy scheme that simultaneously acquires two phase images at different wavelengths. The simultaneous dual-wavelength measurement was performed with a diffraction phase microscope (DPM) based on a transmission grating and a spatial filter that form a common-path imaging interferometer. With a combined laser source that generates two-color light continuously, a different diffraction order of the grating was utilized for each wavelength component so that the dual-wavelength interference pattern could be distinguished by the distinct fringe frequencies. Our dual-wavelength phase imaging allowed us to extract information on the physical thickness and the refractive index for a specimen immersed in a highly dispersive surrounding medium. We found that our dual-wavelength DPM (DW-DPM) provides an accurate measurement of the volume and the refractive index of a microscopy sample with good measurement stability that results from the common-path geometry.

Frequency-domain acquisition of fourth-order correlation by spectral intensity interferometry.

We report on the spectral intensity interferometer (SII) which is a frequency-domain variant of the fourth-order interferometry. In the SII, the power spectrum of the intensity is acquired for light fields of an interferometer. It produces a fringed spectral interferogram which can be acquired by means of an electric spectrum analyzer in keeping the relative time delay constant during the acquisition. Through both theoretical and experimental investigations, we have found that the SII interferogram provides the intensity correlation information without concern of field-sensitive disturbances which are vulnerable to minute variations of the optical paths. As an application example, a precision time-of-flight measurement was demonstrated by using a fiber-optic SII with an amplified spontaneous emission (ASE) light source. A large delay of 4.1-km long fiber was successfully analyzed from the fringe period. Its wavelength-dependent group delay or the group velocity dispersion (GVD) was also measured from the phase shift of the cosine fringe with a sub-picosecond delay precision.

Changes in balancing ability of athletes with chronic ankle instability after foot orthotics application and rehabilitation exercises.

OBJECTIVE: To compare the effect of foot orthotics and rehabilitation exercises by assessing balancing ability and joint proprioception in athletes who have chronic ankle instability. METHODS: Forty-one athletes who visited hospitals due to chronic ankle instability were randomly assigned to two groups. One group had ankle rehabilitation exercises while the other group had the same rehabilitation exercises as well as foot orthotics. Joint position sense of the ankle joint was examined by using an isokinetic exercise machine. Balancing abilities categorized into static, dynamic and functional balance abilities were evaluated by using computerized posturography. We tested the subjects before and after the four-week rehabilitation program. RESULTS: After the four-week treatment, for joint reposition sense evaluation, external 75% angle evaluation was done, revealing that the group with the application of foot orthotics improved by -1.07±1.64 on average, showing no significant difference between the two groups (p>0.05). Static, dynamic and functional balancing abilities using balance masters were evaluated, revealing that the two groups improved in some items, but showing no significant difference between them (p>0.05). CONCLUSION: This study found that athletes with chronic ankle instability who had foot orthotics applied for four weeks improved their proprioceptive and balancing abilities, but did not show additional treatment effects compared with rehabilitation exercise treatment.

Two-photon microscopy using an Yb(3+)-doped fiber laser with variable pulse widths.

Most of the two-photon fluorescence microscopes are based on femtosecond Ti:Sapphire laser sources near the 800 nm wavelength. Here, we introduce a new confocal two-photon microscope system using a mode-locked Yb(3+)-doped fiber laser. The mode-locked fiber laser produces 13 ps pulses with large positive chirping at a repetition rate of 36 MHz with an average power of 80 mW. By using an external grating pair pulse compressor, the pulse width and the frequency chirping of the laser output are controlled for optimum two-photon excitation. For a given objective lens, the optimum condition was obtained by monitoring the two-photon-induced-photocurrent in a GaAsP photodiode at the sample position. The performance of this pulse width optimized two-photon microscope system was demonstrated by imaging Vybrant DiI-stained dorsal root ganglion cells in 2 and 3 dimensions.

Back pain secondary to Brucella spondylitis in the lumbar region.

Brucellosis is a systemic, infectious disease caused by the bacterial genus Brucella and a common zoonosis that still remains a major health problem in certain parts of the world such as the Mediterranean region, the Middle East, and Latin America. It may involve multiple organs and tissues. Osteoarticular involvement is the most frequent complication of brucellosis, in which the diagnosis of brucellar spondylitis is often difficult since the clinical presentation may be obscured by many other conditions. There are only a few reports on brucellar spondylitis in Korea. Here, we report a case of spondylitis due to brucella in an elderly male.

Effective supercontinuum generation by using highly nonlinear dispersion-shifted fiber incorporated with Si nanocrystals.

The dispersion-shifted fiber (DSF) incorporated with Si nanocrystals (Si-NCs) having highly nonlinear optical property was fabricated to investigate the effective supercontinuum generation characteristics by using the MCVD process and the drawing process. Optical nonlinearity was enhanced by incorporating Si nanocrystals in the core of the fiber and the refractive index profile of a dispersion-shifted fiber was employed to match its zero-dispersion wavelength to that of the commercially available pumping source for generating effective supercontinuum. The non-resonant nonlinear refractive index, n2, of the Si-NCs doped DSF measured by the cw-SPM method was measured to be 7.03 x 10(-20) [m2/W] and the coefficient of non-resonant nonlinearity, gamma, was 7.14 [W(-1) km(-1)]. To examine supercontinuum generation of the Si-NCs doped DSF, the femtosecond fiber laser with the pulse width of 150 fs (at 1560 nm) was launched into the fiber core. The output spectrum of the Si-NCs doped DSF was found to broaden from 1300 nm to wavelength well beyond 1700 nm, which can be attributed to the enhanced optical nonlinearity by Si-NCs embedded in the fiber core. The short wavelength of the supercontinuum spectrum in the Si-NCs doped DSF showed shift from 1352 nm to 1220 nm for the fiber length of 2.5 m and 200 m, respectively.

Precision and accuracy of the analog mean-delay method for high-speed fluorescence lifetime measurement.

The analog mean-delay (AMD) method is a new alternative method to measure the lifetime of a fluorescence molecule. Because of its powerful advantages of accurate lifetime determination, good photon economy, and a high photon detection rate, the AMD method is considered to be very suitable for high-speed confocal fluorescence lifetime imaging microscopy (FLIM). For the practical usage of the AMD method in FLIM (AMD-FLIM), detailed study on various experimental conditions and parameters that affect the precision and the accuracy of the AMD method is required. In this paper, we present the relation between the precision and accuracy of the lifetime versus iteration number in the AMD method, the best cutoff frequency of a low-pass filter used in the AMD-FLIM system for a given fluorophore, and the optimum position and width of the integration window by using Monte Carlo simulations and a series of AMD-FLIM experiments.

Detrended fluctuation analysis of membrane flickering in discocyte and spherocyte red blood cells using quantitative phase microscopy.

Dynamic analyses of vibrational motion in cell membranes provide a lot of information on the complex dynamic motilities of a red blood cell (RBC). Here, we present the correlation properties of membrane fluctuation in discocyte and spherocyte RBCs by using quantitative phase microscopy (QPM). Since QPM can provide nanometer sensitivity in thickness measurement within a millisecond time scale, we were able to observe the membrane flicking of an RBC in nanometer resolution up to the bandwidth of 50 Hz. The correlation properties of the vibrational motion were analyzed with the detrended fluctuation analysis (DFA) method. Fractal scaling exponent α in the DFA method was calculated for the vibrational motion of a cell surface at various surface points for normal discocyte and abnormal spherocyte RBCs. Measured α values for normal RBCs are distributed between 0.7 and 1.0, whereas those for abnormal spherocyte RBCs are within a range from 0.85 to 1.2. We have also verified that the vibrational motion of background fluid outside of a cell has an α value close to 0.5, which is a typical property of an uncorrelated white noise.

Masked illumination scheme for a galvanometer scanning high-speed confocal fluorescence microscope.

High-speed beam scanning and data acquisition in a laser scanning confocal microscope system are normally implemented with a resonant galvanometer scanner and a frame grabber. However, the nonlinear scanning speed of a resonant galvanometer can generate nonuniform photobleaching in a fluorescence sample as well as image distortion near the edges of a galvanometer scanned fluorescence image. Besides, incompatibility of signal format between a frame grabber and a point detector can lead to digitization error during data acquisition. In this article, we introduce a masked illumination scheme which can effectively decrease drawbacks in fluorescence images taken by a laser scanning confocal microscope with a resonant galvanometer and a frame grabber. We have demonstrated that the difference of photobleaching between the center and the edge of a fluorescence image can be reduced from 26 to 5% in our confocal laser scanning microscope with a square illumination mask. Another advantage of our masked illumination scheme is that the zero level or the lowest input level of an analog signal in a frame grabber can be accurately set by the dark area of a mask in our masked illumination scheme. We have experimentally demonstrated the advantages of our masked illumination method in detail.

Ultra-high-speed phase-sensitive optical coherence reflectometer with a stretched pulse supercontinuum source.

We demonstrate an ultra-high-speed phase-sensitive time-wavelength-domain optical coherence reflectometer with a stretched pulse supercontinuum source. A pulsed fiber laser operating at 10 MHz repetition rate was used to generate a pulsed supercontinuum of 30 ps pulse duration by using a nonlinear optical fiber. The supercontinuum pulses are stretched into 70 ns pulses with a highly dispersive fiber. With this stretched pulse source, we have built a phase-sensitive optical coherence reflectometer that measures the spectral interferogram of reflected light. By using the linear relation between the wavelength and the temporal position in a linearly chirped pulse, ultra-high-speed spectrum measurement can be obtained with this method in the time domain. We have demonstrated ultra-high-speed two-dimensional surface profiling for a standard image target and high-speed single-point monitoring for a fixed point under vibrational motion. It is shown that the measurement speed for the position of a single point can be as fast as 2.5 MHz, while the position accuracy can be better than 4.49 nm.