Resonant Raman scattering on graphene: SERS and gap-mode TERS.

Nanoscale deformations and corrugations occur in graphene-like two-dimensional materials during their incorporation into hybrid structures and real devices, such as sensors based on surface-enhanced Raman scattering (SERS-based sensors). The structural features mentioned above are known to affect the electronic properties of graphene, thus highly sensitive and high-resolution techniques are required to reveal and characterize arising local defects, mechanical deformations, and phase transformations. In this study, we demonstrate that gap-mode tip-enhanced Raman Scattering (gm-TERS), which offers the benefits of structural and chemical analytical methods, allows variations in the structure and mechanical state of a two-dimensional material to be probed with nanoscale spatial resolution. In this work, we demonstrate locally enhanced gm-TERS on a monolayer graphene film placed on a plasmonic substrate with specific diameter gold nanodisks. SERS measurements are employed to determine the optimal disk diameter and excitation wavelength for further realization of gm-TERS. A significant local plasmonic enhancement of the main vibrational modes in graphene by a factor of 100 and a high spatial resolution of 10 nm are achieved in the gm-TERS experiment, making gm-TERS chemical mapping possible. By analyzing the gm-TERS spectra of the graphene film in the local area of a nanodisk, the local tensile mechanical strain in graphene was detected, resulting in a split of the G mode into two components, G+ and G-. Using the frequency split in the positions of G+ and G- modes in the TERS spectra, the stress was estimated to be up to 1.5%. The results demonstrate that gap-mode TERS mapping allows rapid and precise characterization of local structural defects in two-dimensional materials on the nanoscale.

Endogenous Regeneration of Alveolar Bone by Decellularized Tooth Matrix.

The efficiency of bone tissue regeneration by decellularized tooth matrix, demineralized tooth matrix, and commercial xenograft Bio-Oss Spongiosa was compared on the model of a critical-size circular defect in the alveolar bone of the upper jaw of adult Wistar rats. The defect healing dynamics was assessed using histological, histomorphometrical, and immunohistochemical methods on days 30 and 60. In contrast to demineralized matrix and commercial xenograft, decellularized matrix induces the formation of the new bone tissue by day 60. Decellularized matrix can be considered as a biomaterial for cell-free tissue engineering for alveolar bone restoration in dentistry and maxillofacial surgery.

Interdisk spacing effect on resonant properties of Ge disk lattices on Si substrates.

The light reflection properties of Ge disk lattices on Si substrates are studied as a function of the disk height and the gap width between disks. The interdisk spacing effect is observed even at such large gap widths as 500 nm. The gap width decrease leads to the appearance of the reflection minimum in the short wavelength region relative to one originated from the magnetic and electric dipole resonances in individual Ge disks, thereby essentially widening the antireflection properties. This minimum becomes significantly deeper at small gap widths. The observed behavior is associated with the features of the resonant fields around closely spaced disks according to numerical simulation data. The result shows the importance of using structures with geometrical parameters providing the short-wavelength minimum. This can essentially enhance their other resonant properties, which are widely used for applications, in particular, based on collective lattice resonances.

Resonant plasmon enhancement of light emission from CdSe/CdS nanoplatelets on Au nanodisk arrays.

Semiconducting nanoplatelets (NPLs) have attracted great attention due to the superior photophysical properties compared to their quantum dot analogs. Understanding and tuning the optical and electronic properties of NPLs in a plasmonic environment is a new paradigm in the field of optoelectronics. Here, we report on the resonant plasmon enhancement of light emission including Raman scattering and photoluminescence from colloidal CdSe/CdS nanoplatelets deposited on arrays of Au nanodisks fabricated by electron beam lithography. The localized surface plasmon resonance (LSPR) of the Au nanodisk arrays can be tuned by varying the diameter of the disks. In the case of surface-enhanced Raman scattering (SERS), the Raman intensity profile follows a symmetric Gaussian shape matching the LSPR of the Au nanodisk arrays. The surface-enhanced photoluminescence (SEPL) profile of NPLs, however, follows an asymmetric Gaussian distribution highlighting a compromise between the excitation and emission enhancement mechanisms originating from energy transfer and Purcell effects. The SERS and SEPL enhancement factors depend on the nanodisk size and reach maximal values at 75 and 7, respectively, for the sizes, for which the LSPR energy of Au nanodisks coincides with interband transition energies in the semiconductor platelets. Finally, to explain the origin of the resonant enhancement behavior of SERS and SEPL, we apply a numerical simulation to calculate plasmon energies in Au nanodisk arrays and emission spectra from NPLs in such a plasmonic environment.

Osteogenic Potential of Decellularized Tooth Matrix.

We studied the possibility of using decellularized tooth matrix as a scaffold to restore bone tissue. It was found that mesenchymal stem cells underwent spontaneous osteogenic differentiation on the decellularized tooth matrix, which makes it possible to use it as a natural allograft in the treatment of resorption of alveolar bone tissue.

Dewetting behavior of Ge layers on SiO2 under annealing.

The solid-state dewetting phenomenon in Ge layers on SiO2 is investigated as a function of layer thickness dGe (from 10 to 86 nm) and annealing temperature. The dewetting is initiated at about 580-700 °C, depending on dGe, through the appearance of surface undulation leading to the particle formation and the rupture of Ge layers by narrow channels or rounded holes in the layers with the thicknesses of 10-60 and 86 nm, respectively. The channel widths are significantly narrower than the distance between the particles that causes the formation of thinned Ge layer areas between particles at the middle dewetting stage. The thinned areas are then agglomerated into particles of smaller sizes, leading to the bimodal distributions of the Ge particles which are different in shape and size. The existence of a maximum in the particle pair correlation functions, along with the quadratic dependence of the corresponding particle spacing on dGe, may indicate the spinodal mechanism of the dewetting in the case of relatively thin Ge layers. Despite the fact that the particle shape, during the solid-state dewetting, is not thermodynamically equilibrium, the use of the Young's equation and contact angles allows us to estimate the particle/substrate interface energy.

Resonant tip-enhanced Raman scattering by CdSe nanocrystals on plasmonic substrates.

Tip-enhanced Raman scattering (TERS) has recently emerged as a powerful technique for studying the local properties of low dimensional materials. Being a plasmon driven system, a dramatic enhancement of the TERS sensitivity can be achieved by an appropriate choice of the plasmonic substrate in the so-called gap-mode configuration. Here, we investigate the phonon properties of CdSe nanocrystals (NCs) utilizing gap-mode TERS. Using the Langmuir-Blodgett technique, we homogeneously deposited submonolayers of colloidal CdSe NCs on two different nanostructured plasmonic substrates. Amplified by resonant gap-mode TERS, the scattering by the optical phonon modes of CdSe NCs is markedly enhanced making it possible to observe up to the third overtone of the LO mode reliably. The home-made plasmonic substrates and TERS tips allow the analysis of the TERS images of CdSe phonon modes with nanometer spatial resolution. The CdSe phonon scattering intensity is strongly correlated with the local electromagnetic field distribution across the plasmonic substrates.

Surface Morphology Transformation Under High-Temperature Annealing of Ge Layers Deposited on Si(100).

We study the surface morphology and chemical composition of SiGe layers after their formation under high-temperature annealing at 800-1100 °C of 30-150 nm Ge layers deposited on Si(100) at 400-500 °C. It is found that the annealing leads to the appearance of the SiGe layers of two types, i.e., porous and continuous. The continuous layers have a smoothened surface morphology and a high concentration of threading dislocations. The porous and continuous layers can coexist. Their formation conditions and the ratio between their areas on the surface depend on the thickness of deposited Ge layers, as well as on the temperature and the annealing time. The data obtained suggest that the porous SiGe layers are formed due to melting of the strained Ge layers and their solidification in the conditions of SiGe dewetting on Si. The porous and dislocation-rich SiGe layers may have properties interesting for applications.

[Registration of the protein in the serum with a field-effect nanotransistor biosensor].

A method for detection of cancer-associated protein D-NFATc1 in serum using nanowire (NW) biosensor based on field-effect nanotransistor is developed. Field-effect nanotransistor was fabricated on the basis of «silicon-on-insulator¼ structures. For the biospecific detection of target protein, the NW surface was modified with aptamers against the target protein. Using the 3 um-NW enabled to obtain stable source-drain characteristics and to register D-NFATc1 in serum at concentration of 2.5 x 1014 M in the mode of drain-source current vs. gate voltage characteristics measurements. Data collection in the mode of drain-source current vs. gate voltage characteristics measurements was carried out with the use of high-speed data collection system running TURBO NBS software.

Critical terrace width for two-dimensional nucleation during Si growth on Si(111)-(7×7) surface.

The critical terrace width λ for 2D island nucleation and growth (2DNG) on large-scale atomically flat terraces of a step-bunched Si(111)-(7×7) surface has been studied by in situ ultrahigh vacuum reflection electron microscopy as a function of the substrate temperature T and Si deposition rate R. The dependence of λ(2)(R) is characterized by a power law with scaling exponent χ=1.36-1.46, validating an attachment limited (AL) growth kinetics up to 720 °C. At this temperature, the Arrhenius dependencies lnλ(2)(1/T) change their slope, so that the effective 2DNG activation energy E(2D) drops from 2.4 eV down to 0.5 eV at T>720 °C. We first show that the E(2D) change is caused by a transition between AL and DL (diffusion limited) growth kinetics accompanied by a step shape transformation. The AL growth mode is characterized by kinetic length d(-)~10(5)a and the preferential step-down attachment of atoms to steps limited by an energy barrier E(ES)(-)≈0.9 eV.

A simple approach to prepare molecularly imprinted polymers from nylon-6.

A convenient and simple approach for the preparation of molecularly imprinted polymers (MIPs) based on polyamide (nylon-6) was developed. The polymer matrix formation occurred during the transition of nylon from dissolved to solid state in the presence of template molecules in the initial solution. 2,2,2-Trifluoroethanol (TFE) was chosen as a main solvent for the polyamide. It provides a high solubility of nylon and does not significantly change the structure of biopolymers. The alteration of the polymer matrix structure after the addition of different types of porogens in the nylon/TFE solution was investigated. The structured polymers in the form of films and microparticles were prepared in the chosen optimal conditions. Different model biomolecular templates (of low- and high-molecular weight) were used for the preparation of MIPs, which were shown to specifically recognize these molecules upon binding experiments. The binding of the template molecules to MIPs was monitored using spectrophotometric, radioisotopic, or fluorometric detection. The selectivity coefficients of the MIPs were estimated to be 1.4-4.6 depending on the type of templates and conditions of the polymer matrix formation.

[Experimental base for construction alloy choice for implant-retained restorations].

The paper contains the results of experimental studies on galvanic features of "implant-construction alloy" contact pair. These results may be used as criteria for implant-retained restorations alloy choice.

Magnetic field-induced dissipation-free state in superconducting nanostructures.

A superconductor in a magnetic field acquires a finite electrical resistance caused by vortex motion. A quest to immobilize vortices and recover zero resistance at high fields made intense studies of vortex pinning one of the mainstreams of superconducting research. Yet, the decades of efforts resulted in a realization that even promising nanostructures, utilizing vortex matching, cannot withstand high vortex density at large magnetic fields. Here, we report a giant reentrance of vortex pinning induced by increasing magnetic field in a W-based nanowire and a TiN-perforated film densely populated with vortices. We find an extended range of zero resistance with vortex motion arrested by self-induced collective traps. The latter emerge due to order parameter suppression by vortices confined in narrow constrictions by surface superconductivity. Our findings show that geometric restrictions can radically change magnetic properties of superconductors and reverse detrimental effects of magnetic field.

Investigation of multilayer silicon structures with buried iron silicide nanocrystallites: growth, structure, and properties.

The growth of nanosize islands of iron silicides on Si(100) substrates and epitaxial silicon overgrowth atop them have been studied by low energy electron diffraction and reflectance high energy electron diffraction methods. The near optimal formation conditions of iron silicide islands with high density and minimal sizes have been determined by using of atomic force microscopy. Multilayer (8-10) monolithic structures with buried iron silicide nanocrystallites have been grown after the definition of monocrystalline burying conditions of iron silicides nanocrystallites in silicon lattice. The structure of buried nanocrystallites has been studied in multilayer monolithic heterostructures by high resolution transmission electron microscopy. It was established that in multilayer samples the majority of nanocrystallites have beta-FeSi2 structure, but some of them have gamma-FeSi2 structure. It was observed an influence of additional annealing at 850 degrees C on the morphology and structure of nanocrystallites. By means of deep level transient spectroscopy data one and two trap levels have been observed in multilayer structures (without and with additional annealing, respectively). Photoluminescence spectra have been studied at 4.2 K and the causes of its absence from buried beta-FeSi, NC have been analyzed.

A novel tip-induced local electrical decomposition method for thin GeO films nanostructuring.

Decomposition of germanium monoxide (GeO) films under the impact of an atomic force microscope (AFM) tip was observed for the first time. It is known that GeO is metastable in the solid phase and decomposes into Ge and GeO(2) under thermal annealing or radiation impact. AFM tip treatments allow us to carry out local decomposition. A novel tip-induced local electrical decomposition (TILED) method of metastable GeO films has been developed. Using TILED of 10 nm thin GeO film, Ge nanowires on silicon substrates were obtained.

Application of ultrahigh vacuum reflection electron microscopy for the study of clean silicon surfaces in sublimation, epitaxy, and phase transitions.

The construction and performance of an ultrahigh vacuum reflection electron microscope (UHV REM) on the base of a transmission electron microscope with top entry stage are described. Some results of in situ study of structural transformations on clean silicon surfaces during sublimation, surface phase transitions, and initial stages of epitaxial growth are shown.