Isolated Pt Atoms Stabilized by Ga2O3 Clusters Confined in ZSM-5 for Nonoxidative Activation of Ethane.

Selective activation of light alkanes is an essential reaction in the petrochemical industry for producing commodity chemicals, such as light olefins and aromatics. Because of the much higher intrinsic activities of noble metals in comparison to non-noble metals, it is desirable to employ solid catalysts with low noble metal loadings to reduce the cost of catalysts. Herein, we report the introduction of a tiny amount of Pt (at levels of hundreds of ppm) as a promoter of the Ga2O3 clusters encapsulated in ZSM-5 zeolite, which leads to ∼20-fold improvement in the activity for ethane dehydrogenation reaction. A combination of experimental and theoretical studies shows that the isolated Pt atoms stabilized by small Ga2O3 clusters are the active sites for activating the inert C-H bonds in ethane. The synergy of atomically dispersed Pt and Ga2O3 clusters confined in the 10MR channels of ZSM-5 can serve as a bifunctional catalyst for the direct ethane-benzene coupling reaction for the production of ethylbenzene, surpassing the performances of the counterpart catalysts made with PtGa nanoclusters and nanoparticles.

Boosting the Stability of Subnanometer Pt Catalysts by the Presence of Framework Indium(III) Sites in Zeolite.

Subnanometer metal clusters show advantages over conventional metal nanoparticles in numerous catalytic reactions owing to their high percentage of exposed surface sites, abundance of under-coordinated metal sites and unique electronic structures. However, the applications of subnanometer metal clusters in high-temperature catalytic reactions (>600 °C) are still hindered, because of their low stability under harsh reaction conditions. In this work, we have developed a zeolite-confined bimetallic PtIn catalyst with exceptionally high stability against sintering. A combination of experimental and theoretical studies shows that the isolated framework In(III) species serve as the anchoring sites for Pt species, precluding the migration and sintering of Pt species in the oxidative atmosphere at ≥650 °C. The catalyst comprising subnanometer PtIn clusters exhibits long-term stability of >1000 h during a cyclic reaction-regeneration test for ethane dehydrogenation reaction.

Reactant-Induced Structural Evolution of Pt Catalysts Confined in Zeolite.

Reactant-induced structural evolutions of heterogeneous metal catalysts are frequently observed in numerous catalytic systems, which can be associated with the formation or deactivation of active sites. In this work, we will show the structural transformation of subnanometer Pt clusters in pure-silica MFI zeolite structure in the presence of CO, O2, and/or H2O and the catalytic consequences of the Pt-zeolite materials derived from various treatment conditions. By applying the appropriate pretreatment under a reactant atmosphere, we can precisely modulate the size distribution of Pt species spanning from single Pt atoms to small Pt nanoparticles (1-5 nm) in the zeolite matrix, resulting in the desirably active and stable Pt species for CO oxidation. We also show the incorporation of Fe into the zeolite framework greatly promotes the stability of Pt species against undesired sintering under harsh conditions (up to 650 °C in the presence of CO, O2, and moisture).

Generation of Subnanometer Metal Clusters in Silicoaluminate Zeolites as Bifunctional Catalysts.

Zeolite-encapsulated subnanometer metal catalysts are an emerging class of solid catalysts with superior performances in comparison to metal catalysts supported on open-structure solid carriers. Currently, there is no general synthesis methodology for the encapsulation of subnanometer metal catalysts in different zeolite structures. In this work, we will show a general synthesis method for the encapsulation of subnanometer metal clusters (Pt, Pd, and Rh) within various silicoaluminate zeolites with different topologies (MFI, CHA, TON, MOR). The successful generation of subnanometer metal species in silicoaluminate zeolites relies on the introduction of Sn, which can suppress the migration of subnanometer metal species during high-temperature oxidation-reduction treatments according to advanced electron microscopy and spectroscopy characterizations. The advantage of encapsulated subnanometer Pt catalysts in silicoaluminate zeolites is reflected in the direct coupling of ethane and benzene for production of ethylbenzene, in which the Pt and the acid sites work in a synergistic way.

Integrated immediate postmortem and acute bereavement care: Competency-based entrustable professional activities for nursing.

BACKGROUND: Integrated immediate postmortem and acute bereavement care alleviates emotional distress due to losing a loved one; however, the provision of effective nursing care remains insufficient. Therefore, preparing nursing students with such skills is essential in end-of-life care education, and entrustable professional activities (EPAs) offer potential to address this gap. OBJECTIVES: To establish EPAs concerning immediate postmortem and acute bereavement care with a seven-category description for EPAs, milestones, and assessment tools. DESIGN: We used a modified Delphi method and four-step consensus-building approach to i) identifying the list of possible EPA items related to immediate postmortem and acute bereavement care based on a literature review and clinical experiences, ii) select an expert panel, iii) pool, review, and revise the EPAs, and iv) validate EPA quality using the Queen's EPA Quality rubric. Data analysis was performed via modes and quartile deviations. RESULTS: The following four major EPA components were identified: i) cultural and religious ritual assessment; ii) death preparation; iii) postmortem care; and iv) acute bereavement care. Three essential competencies were identified as highly correlated: general clinical skills, communication and teamwork capabilities, and caring. Consensus was achieved after three survey rounds. A 100 % questionnaire response rate was obtained. In the third round, all items received 4 or 5 points from >95 % of the panel members and were found to meet the quartile deviation cutoff score of <0.6, indicating that a high consensus level was established. The average Queen's EPA Quality rubric score was 62.5, with an average item score of 4.46, which was higher than the cut-off score of 4.07. Three major parts of EPAs were developed: task descriptions, milestones, and the assessment tool. CONCLUSION: The development of EPAs assessments concerning immediate postmortem and acute bereavement care may guide nursing curricula planning to bridge the gap between competencies and clinical practice.

Bimetallic Sites for Catalysis: From Binuclear Metal Sites to Bimetallic Nanoclusters and Nanoparticles.

Heterogeneous bimetallic catalysts have broad applications in industrial processes, but achieving a fundamental understanding on the nature of the active sites in bimetallic catalysts at the atomic and molecular level is very challenging due to the structural complexity of the bimetallic catalysts. Comparing the structural features and the catalytic performances of different bimetallic entities will favor the formation of a unified understanding of the structure-reactivity relationships in heterogeneous bimetallic catalysts and thereby facilitate the upgrading of the current bimetallic catalysts. In this review, we will discuss the geometric and electronic structures of three representative types of bimetallic catalysts (bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles) and then summarize the synthesis methodologies and characterization techniques for different bimetallic entities, with emphasis on the recent progress made in the past decade. The catalytic applications of supported bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles for a series of important reactions are discussed. Finally, we will discuss the future research directions of catalysis based on supported bimetallic catalysts and, more generally, the prospective developments of heterogeneous catalysis in both fundamental research and practical applications.

Dominance of Influencing Factors on Cooling Effect of Urban Parks in Different Climatic Regions.

The enhancement of the park cooling effect (PCE) is one method used to alleviate the urban heat island (UHI). The cooling effect is affected by park factors; however, the importance of these factors in the case of the PCE is still unclear. Optimizing or planning urban parks according to the importance of the influencing factors can effectively enhance the PCE. Herein, we selected 502 urban parks in 29 cities in China with three different climatic regions and quantified the PCE based on the park cooling intensity (PCI) and park cooling area (PCA). Subsequently, the relative importance of the influencing factors for the PCE was compared to identify the main factors. Consequently, certain park planning suggestions were proposed to enhance the cooling effect. The results show that: (1) the PCE increased in the order of arid/semi-arid, semi-humid, and humid regions. (2) The main factors of the PCI differed significantly in different climatic regions; however, the waterbody within a park significantly affected the PCI in all three climates. However, for the PCA, park patch characteristics were the dominant factor, contributing approximately 80% in the three climates regions. (3) In arid/semi-arid and semi-humid regions, the optimal area proportion of waterbody and vegetation within the park were approximately 1:2 and 1:1, respectively, and the threshold value of the park area was 16 ha. In contrast, in the humid region, the addition of a waterbody area within the park, to the best extent possible, enhanced the PCI, and the threshold value of the park area was 19 ha. The unique results of this study are expected to function as a guide to future urban park planning on a regional scale to maximize ecological benefits while mitigating the UHI.

Single-Atom Ce-Modified α-Fe2O3 for Selective Catalytic Reduction of NO with NH3.

A single-atom Ce-modified α-Fe2O3 catalyst (Fe0.93Ce0.07Ox catalyst with 7% atomic percentage of Ce) was synthesized by a citric acid-assisted sol-gel method, which exhibited excellent performance for selective catalytic reduction of NOx with NH3 (NH3-SCR) over a wide operating temperature window. Remarkably, it maintained ∼93% NO conversion efficiency for 168 h in the presence of 200 ppm SO2 and 5 vol % H2O at 250 °C. The structural characterizations suggested that the introduction of Ce leads to the generation of local Fe-O-Ce sites in the FeOx matrix. Furthermore, it is critical to maintain the atomic dispersion of the Ce species to maximize the amounts of Fe-O-Ce sites in the Ce-doped FeOx catalyst. The formation of CeO2 nanoparticles due to a high doping amount of Ce species leads to a decline in catalytic performance, indicating a size-dependent catalytic behavior. Density functional theory (DFT) calculation results indicate that the formation of oxygen vacancies in the Fe-O-Ce sites is more favorable than that in the Fe-O-Fe sites in the Ce-free α-Fe2O3 catalyst. The Fe-O-Ce sites can promote the oxidation of NO to NO2 on the Fe0.93Ce0.07Ox catalyst and further facilitate the reduction of NOx by NH3. In addition, the decomposition of NH4HSO4 can occur at lower temperatures on the Fe0.93Ce0.07Ox catalyst containing atomically dispersed Ce species than on the α-Fe2O3 reference catalyst, resulting in the good SO2/H2O resistance ability in the NH3-SCR reaction.

Direct assessment of confinement effect in zeolite-encapsulated subnanometric metal species.

Subnanometric metal species confined inside the microporous channels/cavities of zeolites have been demonstrated as stable and efficient catalysts. The confinement interaction between the metal species and zeolite framework has been proposed to play the key role for stabilization, though the confinement interaction is elusive to be identified and measured. By combining theoretical calculations, imaging simulation and experimental measurements based on the scanning transmission electron microscopy-integrated differential phase contrast imaging technique, we have studied the location and coordination environment of isolated iridium atoms and clusters confined in zeolite. The image analysis results indicate that the local strain is intimately related to the strength of metal-zeolite interaction and a good correlation is found between the zeolite deformation energy, the charge state of the iridium species and the local absolute strain. The direct observation of confinement with subnanometric metal species encapsulated in zeolites provides insights to understand their structural features and catalytic consequences.

Type of mandibular asymmetry affects changes and outcomes of bimaxillary surgery for class III asymmetry.

OBJECTIVES: Various methods have been used to classify class III asymmetry. There is little information on the use of an asymmetry index to examine soft tissue changes and outcomes for patients with class III asymmetry. This study aimed to (1) evaluate soft tissue changes and outcomes for three types of mandibular asymmetry and (2) determine if measures are associated with type of asymmetry. MATERIALS AND METHODS: Adults who consecutively underwent bimaxillary surgery using surgery-first approach for correction of class III asymmetry were divided into three groups based on type of mandibular asymmetry. This previously reported classification system is simple and mutually independent, categorizing mandibular asymmetry according to the amount and direction of ramus asymmetry relative to menton deviation: patients with a larger transverse ramus distance on the menton deviation side were divided into group 1 and group 2; group 1 (n = 45) exhibited a menton deviation larger than ramus discrepancy; group 2 (n = 11) exhibited a menton deviation less than ramus discrepancy; group 3 (n = 22) had larger transverse ramus distance contralateral to the side of the menton deviation. Soft tissue facial asymmetry indices, calculated from cone beam computed tomography images, assessed midline and contour asymmetry presurgery, changes postsurgery, and outcomes. RESULTS: Compared with groups 1 and 2, the presurgery index for contour and midline asymmetry was smallest for group 3. All the three groups had significant improvement in midline asymmetry postsurgery, and outcome measures were good; there were no differences between groups. However, contour asymmetry only improved significantly for groups 1 and 2. The outcome for contour asymmetry was fair for groups 1 and 3 and poor for group 2. CONCLUSIONS: Bimaxillary surgery significantly improved facial midline asymmetry. The type of mandibular asymmetry was associated with postsurgical changes and outcomes for contour asymmetry. CLINICAL RELEVANCE: Understanding the types of mandibular asymmetry could help clinicians to develop treatment plans and predict treatment changes and outcomes.

Structural transformations of solid electrocatalysts and photocatalysts.

Heterogeneous catalysts often undergo structural transformations when they operate under thermal reaction conditions. These transformations are reflected in their evolving catalytic activity, and a fundamental understanding of the changing nature of active sites is vital for the rational design of solid materials for applications. Beyond thermal catalysis, both photocatalysis and electrocatalysis are topical because they can harness renewable energy to drive uphill reactions that afford commodity chemicals and fuels. Although structural transformations of photocatalysts and electrocatalysts have been observed in operando, the resulting implications for catalytic behaviour are not fully understood. In this Review, we summarize and compare the structural evolution of solid thermal catalysts, electrocatalysts and photocatalysts. We suggest that well-established knowledge of thermal catalysis offers a good basis to understand emerging photocatalysis and electrocatalysis research.

Tuning the Catalytic Performance of Cobalt Nanoparticles by Tungsten Doping for Efficient and Selective Hydrogenation of Quinolines under Mild Conditions.

Non-noble bimetallic CoW nanoparticles (NPs) partially embedded in a carbon matrix (CoW@C) have been prepared by a facile hydrothermal carbon-coating methodology followed by pyrolysis under an inert atmosphere. The bimetallic NPs, constituted by a multishell core-shell structure with a metallic Co core, a W-enriched shell involving Co7W6 alloyed structures, and small WO3 patches partially covering the surface of these NPs, have been established as excellent catalysts for the selective hydrogenation of quinolines to their corresponding 1,2,3,4-tetrahydroquinolines under mild conditions of pressure and temperature. It has been found that this bimetallic catalyst displays superior catalytic performance toward the formation of the target products than the monometallic Co@C, which can be attributed to the presence of the CoW alloyed structures.

Tutorial: structural characterization of isolated metal atoms and subnanometric metal clusters in zeolites.

The encapsulation of subnanometric metal entities (isolated metal atoms and metal clusters with a few atoms) in porous materials such as zeolites can be an effective strategy for the stabilization of those metal species and therefore can be further used for a variety of catalytic reactions. However, owing to the complexity of zeolite structures and their low stability under the electron beam, it is challenging to obtain atomic-level structural information of the subnanometric metal species encapsulated in zeolite crystallites. In this protocol, we show the application of a scanning transmission electron microscopy (STEM) technique that records simultaneously the high-angle annular dark-field (HAADF) images and integrated differential phase-contrast (iDPC) images for structural characterization of subnanometric Pt and Sn species within MFI zeolite. The approach relies on the use of a computational model to simulate results obtained under different conditions where the metals are present in different positions within the zeolite. This imaging technique allows to obtain simultaneously the spatial information of heavy elements (Pt and Sn in this work) and the zeolite framework structure, enabling direct determination of the location of the subnanometric metal species. Moreover, we also present the combination of other spectroscopy techniques as complementary tools for the STEM-iDPC imaging technique to obtain global understanding and insights on the spatial distributions of subnanometric metal species in zeolite structure. These structural insights can provide guidelines for the rational design of uniform metal-zeolite materials for catalytic applications.

Regioselective Generation of Single-Site Iridium Atoms and Their Evolution into Stabilized Subnanometric Iridium Clusters in MWW Zeolite.

Preparation of supported metal catalysts with uniform particle size and coordination environment is a challenging and important topic in materials chemistry and catalysis. In this work, we report the regioselective generation of single-site Ir atoms and their evolution into stabilized subnanometric Ir clusters in MWW zeolite, which are located at the 10MR window connecting the two neighboring 12MR supercages. The size of the subnanometric Ir clusters can be controlled by the post-synthesis treatments and maintain below 1 nm even after being reduced at 650 °C, which cannot be readily achieved with samples prepared by conventional impregnation methods. The high structure sensitivity, size-dependence, of catalytic performance in the alkane hydrogenolysis reaction of Ir clusters in the subnanometric regime is evidenced.

Direct synthesis of the organic and Ge free Al containing BOG zeolite (ITQ-47) and its application for transformation of biomass derived molecules.

Aluminosilicate boggsite (Si/Al-BOG) has been hydrothermally synthesized without adding organic structure-directing agents (OSDAs) in the synthesis gel using the borosilicogermanium ITQ-47 (Si/B-ITQ-47) zeolite as seeds. The introduction of the costly and environmentally less benign phosphazene organic structure-directing agent is not required to grow the zeolite. Physicochemical characterization experiments show that Si/Al-BOG has good crystallinity, high surface area, tetrahedral Al3+ species, and acid sites. In order to test the catalytic performance of the zeolite, the synthesis of l,l-lactide from l-lactic acid was performed. Si/Al-BOG exhibits 88.2% conversion of l-lactic acid and 83.8% l,l-lactide selectivity, which are better than those of other zeolites studied up to now.

Correction: Direct synthesis of the organic and Ge free Al containing BOG zeolite (ITQ-47) and its application for transformation of biomass derived molecules.

[This corrects the article DOI: 10.1039/D0SC04044D.].

Determination of the Evolution of Heterogeneous Single Metal Atoms and Nanoclusters under Reaction Conditions: Which Are the Working Catalytic Sites?

Identification of active sites in heterogeneous metal catalysts is critical for understanding the reaction mechanism at the molecular level and for designing more efficient catalysts. Because of their structural flexibility, subnanometric metal catalysts, including single atoms and clusters with a few atoms, can exhibit dynamic structural evolution when interacting with substrate molecules, making it difficult to determine the catalytically active sites. In this work, Pt catalysts containing selected types of Pt entities (from single atoms to clusters and nanoparticles) have been prepared, and their evolution has been followed, while they were reacting in a variety of heterogeneous catalytic reactions, including selective hydrogenation reactions, CO oxidation, dehydrogenation of propane, and photocatalytic H2 evolution reaction. By in situ X-ray absorption spectroscopy, in situ IR spectroscopy, and high-resolution electron microscopy techniques, we will show that some characterization techniques carried out in an inadequate way can introduce confusion on the interpretation of coordination environment of highly dispersed Pt species. Finally, the combination of catalytic reactivity and in situ characterization techniques shows that, depending on the catalyst-reactant interaction and metal-support interaction, singly dispersed metal atoms can rapidly evolve into metal clusters or nanoparticles, being the working active sites for those abovementioned heterogeneous reactions.

Low-Temperature Catalytic NO Reduction with CO by Subnanometric Pt Clusters.

The catalytic subnanometric metal clusters with a few atoms can be regarded as an intermediate state between single atoms and metal nanoparticles (>1 nm). Their molecule-like electronic structures and flexible geometric structures bring rich chemistry and also a different catalytic behavior, in comparison with the single-atom or nanoparticulate counterparts. In this work, by combination of operando IR spectroscopy techniques and electronic structure calculations, we will show a comparative study on Pt catalysts for CO + NO reaction at a very low temperature range (140-200 K). It has been found that single Pt atoms immobilized on MCM-22 zeolite are not stable under reaction conditions and agglomerate into Pt nanoclusters and particles, which are the working active sites for CO + NO reaction. In the case of the catalyst containing Pt nanoparticles (∼2 nm), the oxidation of CO to CO2 occurs in a much lower extension, and Pt nanoparticles become poisoned under reaction conditions because of a strong interaction with CO and NO. Therefore, only subnanometric Pt clusters allow NO dissociation at a low temperature and CO oxidation to occur well on the surface, while CO interaction is weak enough to avoid catalyst poisoning, resulting in a good balance to achieve enhanced catalytic performance.

Hydrothermal Synthesis of Ruthenium Nanoparticles with a Metallic Core and a Ruthenium Carbide Shell for Low-Temperature Activation of CO2 to Methane.

Ruthenium nanoparticles with a core-shell structure formed by a core of metallic ruthenium and a shell of ruthenium carbide have been synthesized by a mild and easy hydrothermal treatment. The dual structure and composition of the nanoparticles have been determined by synchrotron X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure (NEXAFS) analysis, and transmission electron microscopy (TEM) imaging. According to depth profile synchrotron XPS and X-ray diffraction (XRD) analysis, metallic ruthenium species predominate in the inner layers of the material, ruthenium carbide species being located on the upper surface layers. The ruthenium carbon catalysts presented herein are able to activate both CO2 and H2, exhibiting exceptional high activity for CO2 hydrogenation at low temperatures (160-200 °C) with 100% selectivity to methane, surpassing by far the most active Ru catalysts reported up to now. On the basis of catalytic studies and isotopic 13CO/12CO2/H2 experiments, the active sites responsible for this unprecedented activity can be associated with surface ruthenium carbide (RuC) species, which enable CO2 activation and transformation to methane via a direct CO2 hydrogenation mechanism. Both the high activity and the absence of CO in the gas effluent confer relevance to these catalysts for the Sabatier reaction, a chemical process with renewed interest for storing surplus renewable energy in the form of methane.

Regioselective generation and reactivity control of subnanometric platinum clusters in zeolites for high-temperature catalysis.

Subnanometric metal species (single atoms and clusters) have been demonstrated to be unique compared with their nanoparticulate counterparts. However, the poor stabilization of subnanometric metal species towards sintering at high temperature (>500 °C) under oxidative or reductive reaction conditions limits their catalytic application. Zeolites can serve as an ideal support to stabilize subnanometric metal catalysts, but it is challenging to localize subnanometric metal species on specific sites and modulate their reactivity. We have achieved a very high preference for localization of highly stable subnanometric Pt and PtSn clusters in the sinusoidal channels of purely siliceous MFI zeolite, as revealed by atomically resolved electron microscopy combining high-angle annular dark-field and integrated differential phase contrast imaging techniques. These catalysts show very high stability, selectivity and activity for the industrially important dehydrogenation of propane to form propylene. This stabilization strategy could be extended to other crystalline porous materials.