ABSTRACT
Previous studies have reported various methods of measuring the fracture toughness of brittle ceramics. The purpose of the present research was to use a new method of fractal dimension measurement on benchmark materials (silica glass, Viosil SX, Shin-Etsu, n = 13, and silicon nitride standard reference material, SRM2100, NIST, n = 10), to compare the fracture toughness calculated using different methods, and to study the effect of noise filtering on the fractal dimension and fracture surface roughness. Fracture toughness was determined using surface crack in flexure method according to ASTM C1421 and fractal analysis method. Fractal dimension was determined using the Minkowski Cover algorithm on atomic force microscope scans of epoxy replicas of fracture surfaces. The mean ± standard deviation of fracture toughness using surface crack in flexure method and fractals method were 0.97 ± 0.18 MPa·m1/2 and 1.03 ± 0.07 MPa·m1/2 for silica glass and 4.62 ± 0.14 MPa·m1/2 and 2.54 ± 0.07 MPa·m1/2 for silicon nitride, respectively. The mean ± standard deviation of fractal dimension was 2.17 ± 0.03 for silica glass and 2.13 ± 0.01 for silicon nitride. The mean ten-point roughness (Rz) before and after noise filtering was 89 ± 102 nm and 87 ± 101 nm for silica glass and 355 ± 132 nm and 357 ± 134 nm for silicon nitride, respectively. Noise filtering had no significance on the fracture surface roughness of the two materials. The newly developed fractal analysis method can be used to predict the baseline fracture toughness of specimens with unknown failure stress.