Development of a non-titration potentiometric method for the determination of acidity in vinegar.

The acidity of a solution is associated with the concentration of Brønsted acids. This work proposes a new non-titrimetric potentiometric method using citrate buffer for the determination of vinegar acidity. The difference between the pH values before and after the addition of a diluted vinegar sample to 10 mmol L-1 citrate buffer (pH 5.5) was related to the acetic acid concentration. The dynamic range of the quadratic analytical curve was from 3.5 to 20 mmol L-1 (R2 = 0.998). The repeatability was 0.8% for acetic acid at 0.01 mol L-1. Comparison with the conventional titration method showed an error between 0.7% and 4.64% (n = 9) for analysis of commercial vinegar samples The behaviour of the system could be explained using the buffering function.

Worldwide trends on molar incisor and deciduous molar hypomineralisation research: a bibliometric analysis over a 19-year period.

AIM: To identify the worldwide trends in scientific evidence and gaps in knowledge regarding molar incisor hypomineralisation (MIH) and deciduous molar hypomineralisation/hypomineralised second primary molars (DMH/HSPM), exploring the contribution of authors and countries, possible etiological factors and proposed treatments, in order to guide future research in the area. METHODS: Searches were conducted in MEDLINE, Scopus, Web of Science, Cochrane Library, Lilacs/BBO, Embase and Google Scholar. Studies employing the terms MIH, DMH/HSPM and their linguistic variations were included. The following data were extracted: title, authors, year and journal of publication and first author's affiliation country. Studies were categorized according to topic, dentition, study design, etiological factors and types of treatments. Categories were analysed in relation to their distribution, co-occurrence, cross-correlation and/or autocorrelation. RESULTS: Five hundred and three studies were included. The most published authors were Manton D (n = 47), de Souza JF (n = 22) and Ghanim A (n = 22) and four main collaboration clusters have been identified. Most of the studies were conducted on permanent dentition (MIH) (87.4%); with observational design (57.2%). The "European Archives of Paediatric Dentistry" was the most published journal (13.3%) and a significant increase in the number of publications was observed in the last decade. MIH was most studied in relation to prevalence/incidence, systemic factors involved in its aetiology and treatment with composite restorations, while a gap in knowledge was observed for extraction and sealants. Less studies were published on DMH/HSPM and most of them evaluated risk factors or prevalence/incidence. The gap of knowledge was observed in relation to treatments and patient's quality of life. CONCLUSIONS: This bibliometric review provided a comprehensive overview of research in MIH and DMH/HSPM over the past 19 years. Within the limitations of the present study, the following conclusions can be drawn: global trends point to an increasing peak of scientific publication, especially in the last decade, while there is a shortage of clinical studies on treatments, mainly evaluating tooth extractions. Finally the multifactorial nature should be further explored, considering environmental and systemic factors together.

Magnetoliposomes as model for signal transmission.

Liposomes containing magnetic nanoparticles (magnetoliposomes) have been extensively explored for targeted drug delivery. However, the magnetic effect of nanoparticles movement is also an attractive choice for the conduction of signals in communication systems at the nanoscale level because of the simple manipulation and efficient control. Here, we propose a model for the transmission of electrical and luminous signals taking advantage of magnetophoresis. The study involved three steps. Firstly, magnetite was synthesized and incorporated into fusogenic large unilamellar vesicles (LUVs) previously associated with a fluorescent label. Secondly, the fluorescent magnetite-containing LUVs delivered their contents to the giant unilamellar vesicles (GUVs), which were corroborated by magnetophoresis and fluorescence microscopy. In the third step, magnetophoresis of magnetic vesicles was used for the conduction of the luminous signal from a capillary to an optical fibre connected to a fluorescence detector. Also, the magnetophoresis effects on subsequent transmission of the electrochemical signal were demonstrated using magnetite associated with CTAB micelles modified with ferrocene. We glimpse that these magnetic supramolecular systems can be applied in micro- and nanoscale communication systems.

Mineral density in carious dentine after treatment with calcium silicates and polyacrylic acid-based cements.

AIM: To test the hypothesis that polyacrylic acid-based and calcium silicate materials are able to increase mineral density of artificially demineralized dentine produced by a microcosm model for caries formation. METHODOLOGY: Forty-five dentine cavities were prepared in nine sound human third molars (five in each tooth). Specimens received a bacterial inoculum and were incubated in BHI plus 5% of sucrose for 96 h to allow biofilm formation. After that, the specimens were scanned in a high energy micro-CT (baseline stack) and then, each cavity was filled with different cements: zinc polycarboxylate (Poly Zinc™, Prevest DenPro, Jammu, India), conventional glass-ionomer (Ketac Molar, 3M ESPE, Seefeld, Germany) and two calcium silicate-based materials (MTA, Angelus, Londrina, Brazil and Biodentine™, Septodont, Saint Maur des Fosses, France) whilst the central cavity was filled with utility wax (negative control). Specimens were kept for 45 days under simulated intrapulpal pressure using simulated body fluid and after, they were again scanned (treated stacks). Reconstruction of the acquired projections was accomplished using standardized parameters, and the percentage mineral density change was calculated around each cavity. Data were tested for normality using the Shapiro-Wilk test, followed by nonparametric methods. RESULTS: A microcosm artificial caries model was able to cause dentine demineralization (±90% related to sound dentine). Significant increases in dentine mineral density were achieved using MTA or Poly Zinc™ (43.56% and 41.64% remineralization), followed by Biodentine™ (36.40%) and Ketac Molar (32.54%), P < 0.05. CONCLUSION: All cements increased mineral density in demineralized dentine, but zinc polycarboxylate cement and MTA had greater bioactive potential. Micro-CT proved to be an effective method to evaluate changes in mineral density within dentine in contact with bioactive materials.

Effects of increased apical enlargement on the amount of unprepared areas and coronal dentine removal: a micro-computed tomography study.

AIM: To evaluate the effects of progressive apical enlargement on the amount of unprepared root canal surface area and remaining dentine thickness. METHODOLOGY: The root canals of 30 extracted mandibular incisors with Vertucci's type I configuration were instrumented with rotary HyFlex CM instruments (Coltene-Whaledent, Altstätten, Switzerland) up to 4 instruments larger than the first one that bound at the working length (WL). Teeth were scanned in a micro-computed tomography (micro-CT) device before canal preparation and after instrumentation with the 2nd, 3rd and 4th larger instruments. The amount of unprepared surface area in the full canal or in the apical 4 mm as well as the remaining dentine thickness at 10 mm from the WL were calculated and compared. The general linear model for repeated measures adjusted by Bonferroni's post hoc test was used for statistic analysis. RESULTS: There was a significant reduction in the amount of unprepared areas after each increase in preparation size (P < 0.01). This was observed for both the full canal length and the 4-mm apical segment. The amount of remaining dentine was also significantly reduced after each file size (P < 0.01). However, dentine thickness always remained greater than 1 mm, even after using the largest instrument. CONCLUSION: Apical preparations up to 4 instruments larger than the first one to bind at the WL caused a significant progressive reduction in the unprepared canal area.

Dissolution, dislocation and dimensional changes of endodontic sealers after a solubility challenge: a micro-CT approach.

AIM: To evaluate, using a novel micro-CT approach, the solubility and dimensional changes of an MTA-based sealer inside the root canal system after a solubility challenge. The MTA-based material (MTA Fillapex) was compared to a gold standard epoxy-based endodontic sealer (AH Plus). METHODOLOGY: Ten human mandibular premolars with a single canal were divided randomly into two groups (n = 5) according to the sealer used. The canals were instrumented using the Reciproc System (VDW) with a R40 file and filled with R40 gutta-percha cones and one of the sealers. The filled canals were immediately scanned in a micro-CT, and after that, the teeth were immersed in 20 mL phosphate-buffered saline (PBS) at 37 °C for 7 days, when they were removed and rescanned. Final image stacks were registered against the initial stacks and the numerical difference between the initial and final volume of the filling material was obtained. Calculations were performed to identify dimensional changes of the filling material. All image stacks were 3D rendered to disclose areas of dislocation of the filling material inside or outside the root canal. The Shapiro-Wilk's test revealed that data were normally distributed; thus, the Student's t-test was used to detect statistically significant changes, assuming a 5% α-error. RESULTS: No significant changes were seen for the percentage volume of material lost after the solubility challenge for both AH Plus and MTA Fillapex groups (1.44% and 1.16%, respectively). A significant difference was, however, found for the volume of filling material which revealed dimensional changes after the solubility test (6.68% for MTA Fillapex and 1.09% for AH Plus). In fact, observation of 3D models disclosed that MTA Fillapex was associated with material extrusion through the foramen in all but one sample. In AH Plus filled samples, no material extrusion was detected. CONCLUSIONS: Although the solubility of both sealers was similar using this novel micro-CT approach, MTA Fillapex was associated with significant dimensional changes related to material extrusion through the apex after PBS storage compared to AH Plus.

Do smear-layer removal agents affect the push-out bond strength of calcium silicate-based endodontic sealers?

AIM: To evaluate the effect of 17% ethylenediaminetetraacetic acid (EDTA), 2.25% peracetic acid (PA) or 10% citric acid (CA) on the push-out bond strength of calcium silicate-based endodontic sealers [MTA Fillapex (Angelus, Londrina, Brazil) and Total Fill BC Sealer (FKG, La Chaux-de-Fonds, Switzerland)] to root dentine after different periods of immersion in phosphate-buffered saline (PBS). AH Plus (Dentsply DeTrey, Konstaz, Germany) was used as a reference material for comparison. METHODOLOGY: Thirty human maxillary incisors were selected and three 1-mm discs were obtained from the middle third of each root. On the axial surface of each disc, three 0.8-mm-diameter holes were drilled through the dentine. After standardized irrigation, each dentine disc from the same root was treated for smear-layer removal with one of the three tested chelating solutions: EDTA, PA or CA. After that, the holes were dried with paper points and filled with one of the three test root canal sealers. The filled dental slices were further immersed in PBS solution (pH 7.2) for 7 days (T1) or 30 days (T2) at 37 °C, before the push-out assay. Friedman, Kruskal-Wallis and Mann-Whitney tests were used respectively to estimate the impact of the independent variables (solutions, sealers and period of PBS immersion) on the push-out bond strength. The level for significance was set at α = 5% and data were further subjected to a Bonferroni correction. RESULTS: Solutions and periods of immersion did not significantly influence the displacement resistance (P = 0.285, and P = 0.104, respectively) of sealers to root dentine. On the other hand, the type of sealer significantly affected the push-out bond strength (P = 0.000). AH Plus was associated with greater resistance to dislodgment compared with Total Fill BC Sealer and MTA Fillapex (P = 0.000). MTA Fillapex resulted in the lowest push-out bond strength (P = 0.000). CONCLUSION: The use of different chelating agents did not influence the push-out bond strength of endodontic sealers. Calcium silicate-based sealers had lower push-out bond strength values compared with a conventional epoxy resin-based sealer (AH Plus).

Impact of needle insertion depth on the removal of hard-tissue debris.

AIM: To evaluate the effect of depth of insertion of an irrigation needle tip on the removal of hard-tissue debris using micro-computed tomographic (micro-CT) imaging. METHODOLOGY: Twenty isthmus-containing mesial roots of mandibular molars were anatomically matched based on similar morphological dimensions using micro-CT evaluation and assigned to two groups (n = 10), according to the depth of the irrigation needle tip during biomechanical preparation: 1 or 5 mm short of the working length (WL). The preparation was performed with Reciproc R25 file (tip size 25, .08 taper) and 5.25% NaOCl as irrigant. The final rinse was 17% EDTA followed by bidistilled water. Then, specimens were scanned again, and the matched images of the canals, before and after preparation, were examined to quantify the amount of hard-tissue debris, expressed as the percentage volume of the initial root canal volume. Data were compared statistically using the Mann-Whitney U-test. RESULTS: None of the tested needle insertion depths yielded root canals completely free from hard-tissue debris. The insertion depth exerted a significant influence on debris removal, with a significant reduction in the percentage volume of hard-tissue debris when the needle was inserted 1 mm short of the WL (P < 0.05). CONCLUSIONS: The insertion depth of irrigation needles significantly influenced the removal of hard-tissue debris. A needle tip positioned 1 mm short of the WL resulted in percentage levels of hard-tissue debris removal almost three times higher than when positioned 5 mm from the WL.

Influence of electronic apex locators and a gutta-percha heating device on implanted cardiac devices: an in vivo study.

AIM: To evaluate the potential for electromagnetic interference (EMI) of electronic apex locators (EALs) and a gutta-percha heating device (HD) in patients with implantable cardiac pacemakers (ICPs) or cardioverter-defibrillators (ICDs). METHODOLOGY: Two types of EALs (Romiapex A-15 and Novapex) and a HD (Touch'n Heat) were tested in patients followed in an outpatient clinic for cardiac arrhythmias. The heart rhythm was monitored on a computer screen during all experimental phases. After baseline data collection, the patient held each appliance (turned on) for 30 s, simulating their clinical use. If background noise was detected on the cardiac monitor, the sensitivity of the ICP/ICD was lowered by the cardiologist to evaluate the intensity of the detected EMI. RESULTS: Twelve patients were evaluated (5 female and 7 male), and in nine instances, background noise in their cardiac devices related to the use of the endodontic devices was detected (6 patients). After lowering the sensitivity of the cardiac implants, three patients had more severe EMI in six instances, including pauses in ICP function. The presence of a symptomatic or asymptomatic pause was related to the patient's underlying heart rhythm. The HD device produced background noise more often compared to EALs. These were associated with more severe types of EMI. CONCLUSION: The EALs and gutta-percha HD were capable of causing background noise detection or pauses in cardiac implants in vivo. The use of electronic dental devices nearby patients with cardiac implants should be carefully considered in clinical practice.

Exploiting the potential of free software to evaluate root canal biomechanical preparation outcomes through micro-CT images.

AIM: To propose an automated image processing routine based on free software to quantify root canal preparation outcomes in pairs of sound and instrumented roots after micro-CT scanning procedures. METHODOLOGY: Seven mesial roots of human mandibular molars with different canal configuration systems were studied: (i) Vertucci's type 1, (ii) Vertucci's type 2, (iii) two individual canals, (iv) Vertucci's type 6, canals (v) with and (vi) without debris, and (vii) canal with visible pulp calcification. All teeth were instrumented with the BioRaCe system and scanned in a Skyscan 1173 micro-CT before and after canal preparation. After reconstruction, the instrumented stack of images (IS) was registered against the preoperative sound stack of images (SS). Image processing included contrast equalization and noise filtering. Sound canal volumes were obtained by a minimum threshold. For the IS, a fixed conservative threshold was chosen as the best compromise between instrumented canal and dentine whilst avoiding debris, resulting in instrumented canal plus empty spaces. Arithmetic and logical operations between sound and instrumented stacks were used to identify debris. Noninstrumented dentine was calculated using a minimum threshold in the IS and subtracting from the SS and total debris. Removed dentine volume was obtained by subtracting SS from IS. RESULTS: Quantitative data on total debris present in the root canal space after instrumentation, noninstrumented areas and removed dentine volume were obtained for each test case, as well as three-dimensional volume renderings. CONCLUSION: After standardization of acquisition, reconstruction and image processing micro-CT images, a quantitative approach for calculation of root canal biomechanical outcomes was achieved using free software.

Raman, hyper-Raman, hyper-Rayleigh, two-photon luminescence and morphology-dependent resonance modes in a single optical tweezers system.

We present a setup of optical tweezers combined with linear and nonlinear microspectroscopies that enhances the capabilities of capture and analysis of both techniques. We can use either a continuous-wave (cw) Ti:sapphire laser for Raman measurements or a pulsed femtosecond Ti:sapphire laser that permitted the observation of nonlinear results such as hyper-Raman, hyper-Rayleigh, and two-photon luminescence. Only the high peak intensity of the femtosecond laser allows the observation of all these nonlinear spectroscopies. The sensitivity of our system also permitted the observation of morphology-dependent resonance (MDR) modes of a single stained trapped microsphere of 6 microm. The possibility of performing spectroscopy in a living microorganism optically trapped in any desired neighborhood would mean that one can dynamically observe the chemical reactions and/or mechanical properties changing in real time.

Microscopic investigation of artificially demineralized surface enamel exposed to controlled intra-oral periods.

BACKGROUND: Arrest and regression of enamel caries is generally followed by clinical surface changes in enamel. The aim of this study was to evaluate microscopic surface changes in demineralized enamel submitted to toothbrushing with a fluoridated dentifrice or to a fluoridated gel in situ. METHODS: Enamel blocks demineralized by an acidic gel, were built in plates of five volunteers during three periods of 14 days each: exposure to the oral cavity (C+); brushing with a fluoridated dentifrice three times a days (B); application of a 2 per cent sodium fluoride gel and exposure to the oral cavity (F). Eight blocks were kept in 100 per cent humidity under refrigeration as negative controls (C-). RESULTS: Stereomicroscopic examination revealed that 15, 47.4 and 30 per cent of samples from C+, B and F presented enamel cavitation after the experimental period. The demineralized enamel area in these groups decreased considerably compared to C-, both in cavitated and non-cavitated samples, although it was statistically significant only in cavitated samples from B (p=0.003; t test). Scanning electron microscopy revealed that C+ and F retained irregularities caused by the acid challenge, while B presented a more leveled profile of the enamel surface. CONCLUSIONS: Exposure of demineralized enamel to intra-oral periods reduced the demineralized enamel area. Tooth brushing enhanced this reduction, because of surface abrasion.

Bilateral connation of permanent mandibular incisors: a case report.

Connated teeth are the consequences of developmental anomalies leading to the eruption of joined elements. According to current definitions, gemination occurs when one tooth bud tries to divide, while fusion occurs if two buds unite. Clinical experience shows, however, that diagnosis can be complicated due to superimposed anomalies. This report describes a unique case of bilateral fusion of permanent mandibular incisors and discusses the differential diagnosis and possible future treatment options anticipated for this particular case.