Fabrication of TiVO4 photoelectrode for photoelectrochemical application.

Photoelectrochemical (PEC) water splitting is one of the promising, environmentally friendly, carbon emission-free strategies for the cost-effective production of hydrogen. The interest in developing effective approaches for solar-to-hydrogen production with stable and visible light active semiconductors directed many researchers to develop stable and efficient materials. For the first time, a nanostructured TiVO4 photoanode was fabricated at a substrate temperature of 250 °C and further annealed at 600 °C using the spray pyrolysis technique and it obtained an optical band gap of ∼2.18 eV. The photoanode underwent photoelectrochemical testing, where it exhibited a high photocurrent density of 0.080 mA cm-2 at 1.23 V (vs. reversible hydrogen electrode), which can be stable up to 110 min. Further, various physicochemical characterizations were employed to understand the phase purity and thin film growth mechanism. A systematic substrate and annealed temperatures were monitored during the fabrication process. The transmission electron microscopy (TEM) studies revealed agglomeration of TiVO4 nanoparticles with an average size of ∼100 nm accompanying dendritic orientation at the outer edge. This study envisages the design and development of a novel photocatalyst for water splitting under visible light irradiation, an ideal route to a cost-effective, large-scale, sustainable route for hydrogen production.

Vertically Aligned CdO-Decked α-Fe2O3 Nanorod Arrays by a Radio Frequency Sputtering Method for Enhanced Photocatalytic Applications.

Green hydrogen production is one of the most desirable sustainable goals of the United Nations. Thus, for that purpose, we developed hematite (α-Fe2O3), an n-type semiconductor, a desirable candidate for photoelectrochemical (PEC) water splitting, enabling hydrogen evolution. High recombination losses, low efficiency, and large-scale production hinder its potential. To address these issues, we have fabricated optimized bare and cadmium oxide (CdO)-decorated hematite thin film nanorod arrays using a throughput radio frequency (RF) sputtering with efficient water splitting behavior. To the best of our knowledge, no work has been done so far on the synthesis of CdO/α-Fe2O3 via RF sputtering for PEC application. Bare α-Fe2O3 samples, with a morphology of vertically aligned nanorods, were fabricated with optimized parameters such as as-deposited 70 nm of Fe, an angle of deposition of 70°, and an annealing temperature of 600 °C, which showed a photocurrent density of 0.38 mA/cm2 at 1.65 V vs reversible hydrogen electrode (RHE). Characterizations depicted that this unique morphology with high crystallinity directly enhanced the performance of hematite photoanodes. Further, deposition of 30 nm of cadmium (CdO) on the α-Fe2O3 nanorods produced a corn-like morphology with CdO nanoparticles (∼2 nm), resulting in 4-times enhancement of the PEC performance (1.2 mA/cm2 at 1.65 V vs RHE). CdO acted as a co-catalyst, responsible for satisfactory suppression of recombination and facilitating the hole transfer, directly enhancing the overall photocurrent density. This photoanode showed an extremely stable behavior over a period of 26 h when kept under constant illumination. Furthermore, the CdO-modified photoanode showed a better dye degradation (98% in 40 min) than the bare hematite (60% in 40 min), proving to be an efficient photoanode.

Comfort Analysis of Hafnium (Hf) Doped ZnO Coated Self-Cleaning Glazing for Energy-Efficient Fenestration Application.

To attain a comfortable building interior, building windows play a crucial role. Because of the transparent nature of the window, it allows heat loss and gain and daylight. Thus, they are one of the most crucial parts of the building envelope that have a significant contribution to the overall building energy consumption. The presence of dust particles on a window can change the entering light spectrum and creates viewing issues. Thus, self-cleaning glazing is now one of the most interesting research topics. However, aside from the self-cleaning properties, there are other properties that are nominated as glazing factors and are imperative for considering self-cleaning glazing materials. In this work, for the first time, Hf-doped ZnO was investigated as self-cleaning glazing and its glazing factors were evaluated. These outcomes show that the various percentages of ZnO doping with Hf improved the glazing factors, making it a suitable glazing candidate for the cold-dominated climate.

Development of Morphologically engineered Flower-like Hafnium-Doped ZnO with Experimental and DFT Validation for Low-Temperature and Ultrasensitive Detection of NOX Gas.

Substitutional doping and different nanostructures of ZnO have rendered it an effective sensor for the detection of volatile organic compounds in real-time atmosphere. However, the low selectivity of ZnO sensors limits their applications. Herein, hafnium (Hf)-doped ZnO (Hf-ZnO) nanostructures are developed by the hydrothermal method for high selectivity of hazardous NOX gas in the atmosphere, substantially portraying the role of doping concentration on the enhancement of structural, optical, and sensing behavior. ZnO microspheres with 5% Hf doping showed excellent sensing and detected 22 parts per billion (ppb) NOX gas in the atmosphere, within 24 s, which is much faster than ZnO (90 s), and rendered superior sensing ability (S = 67) at a low temperature (100 °C) compared to ZnO (S = 40). The sensor revealed exceptional stability under humid air (S = 55 at 70% RH), suggesting a potential of 5% Hf-ZnO as a new stable sensing material. Density functional theory (DFT) and other characterization analyses revealed that the high sensing activity of 5% Hf-ZnO is attributed to the accessibility of more adsorption sites arising due to charge distortion, increased oxygen vacancies concentration, Lewis acid base, porous morphology, small particle size (5 nm), and strong bond interaction amidst NO2 molecule with ZnO-Hf-Ovacancy sites, resulting from the substitution of the host cation (Zn2+) with doping cation (Hf4+).

RF Sputtered Nb-Doped MoS2 Thin Film for Effective Detection of NO2 Gas Molecules: Theoretical and Experimental Studies.

Doping plays a significant role in affecting the physical and chemical properties of two-dimensional (2D) dichalcogenide materials. Controllable doping is one of the major factors in the modification of the electronic and mechanical properties of 2D materials. MoS2 2D materials have gained significant attention in gas sensing owing to their high surface-to-volume ratio. However, low response and recovery time hinder their application in practical gas sensors. Herein, we report the enhanced gas response and recovery of Nb-doped MoS2 gas sensor synthesized through physical vapor deposition (PVD) toward NO2 at different temperatures. The electronic states of MoS2 and Nb-doped MOS2 monolayers grown by PVD were analyzed based on their work functions. Doping with Nb increases the work function of MoS2 and its electronic properties. The Nb-doped MoS2 showed an ultrafast response and recovery time of t rec = 30/85 s toward 5 ppm of NO2 at their optimal operating temperature (100 °C). The experimental results complement the electron difference density functional theory calculation, showing both physisorption and chemisorption of NO2 gas molecules on niobium substitution doping in MoS2.

Reduced graphene oxide (rGO) aerogel: Efficient adsorbent for the elimination of antimony (III) and (V) from wastewater.

3D porous, thin sheet-like rGO aerogel was fabricated to explore its antimony (Sb) removal potential from wastewater. Langmuir isothermal and pseudo-second-order kinetic model best-suited the adsorption process. The maximum adsorption capacities were 168.59 and 206.72 mg/g for Sb (III and V) at pH 6.0 respectively. The thermodynamic parameters designated the process to be thermodynamically spontaneous, endothermic reaction, a result of dissociative chemisorption. The rGO aerogel bestowed good selectively among competing ions and reusability with 95% efficiency. rGO posed excellent practicability with Sb-spiked tap water and fixed-bed column experiments showing 97.6% of Sb (III) (3.6 µg/L) and 96.8% of Sb (V) (4.7 µg/L) removal from tap water and from fixed column bed experiments breakthrough volumes (BV) for the Sb (III) and Sb (V) ions were noted to be 540 BV and 925 BV respectively, until 5 ppb, which are below the requirement of MCL for Sb in drinking water (6 µg/L). XPS and DFT analyses explained adsorption mechanism and depicted a higher affinity of Sb (V) towards rGO surface than Sb (III).

Role of Hafnium Doping on Wetting Transition Tuning the Wettability Properties of ZnO and Doped Thin Films: Self-Cleaning Coating for Solar Application.

Herein, we successfully synthesized high-quality Hf-ZnO thin films with various Hf contents (0, 3, 6, 9, 12, and 15 at. %), which showed both superhydrophilic (6% Hf-ZnO) and ultrahydrophobic (15% Hf-ZnO) wetting behavior. Different characterization methods were opted to recognize the structural (XRD, SEM, AFM) and defect properties (XPS) of the pristine and doped materials, to understand the mechanisms underlying the tuning of wetting behavior (contact angle). Hafnium doping plays a noteworthy role in tuning the morphology of the ZnO nanostructures, roughness of the material surface, generation of defects, Lewis acid-base interactions, and wettability properties. We achieved a superhydrophilic surface with 6% Hf-ZnO owing to a smooth surface, less basicity, and maximum concentration of oxygen vacancies, and also an ultrahydrophobic surface with 15% Hf-ZnO because of the rough surface, high basicity, and minimum concentration of oxygen vacancies. The as prepared Hf-ZnO samples showed stable performance (stability, wearability, weatherability, and antifouling) under real-life conditions marking them multifunctional and biosafe material to be effectively used in solar and building's window. A wetting mechanism was established to relate the wetting behavior of the samples to oxygen vacancies (active sites for water dissociation: resulted due to charge mismatch of host cation (Zn2+) by the doped cation (Hf4+)), roughness (smooth surface (Wenzel) with minimum Rrms (0.588) portraying hydrophilic property and rough caltropic surface (Cassie-Baxter) with maximum Rrms (2.522) portraying hydrophobic property), basicity (H2O: Lewis Base; ZnO: Lewis acid; HfO2: Lewis base) and morphology (tube-like structure (0-6% Hf-ZnO) and caltrop-like structure (12-15% Hf-ZnO)).

Impact of COVID-19 pandemic on socio-economic, energy-environment and transport sector globally and sustainable development goal (SDG).

The United Nation's Sustainable Development Goals (SDGs) want to have a peaceful world where human life will be in a safe, healthy, sustainable environment without any inequalities. However, the year 2020 experienced a global pandemic due to COVID-19. This COVID-19 created an adverse impact on human life, economic, environment, and energy and transport sector compared to the pre-COVID-19 scenario. These above-mentioned sectors are interrelated and thus lockdown strategy and stay at home rules to reduce the COVID-19 transmission had a drastic effect on them. With lockdown, all industry and transport sectors were closed, energy demand reduced greatly but the time shift of energy demand had a critical impact on grid and energy generation. Decreased energy demand caused a silver lining with an improved environment. However, drowned economy creating a negative impact on the human mind and financial condition, which at times led to life-ending decisions. Transport sector which faced a financial dip last year trying to coming out from the losses which are not feasible without government aid and a new customer-friendly policy. Sustainable transport and the electric vehicle should take high gear. While people are staying at home or using work from home scheme, building indoor environment must specially be taken care of as a compromised indoor environment affects and increases the risk of many diseases. Also, the energy-efficient building will play a key role to abate the enhanced building energy demand and more generation from renewable sources should be in priority. It is still too early to predict any forecast about the regain period of all those sectors but with vaccination now being introduced and implemented but still, it can be considered as an ongoing process as its final results are yet to be seen. As of now, COVID-19 still continue to grow in certain areas causing anxiety and destruction. With all these causes, effects, and restoration plans, still SDGs will be suffered in great order to attain their target by 2030 and collaborative support from all countries can only help in this time.

Study of COVID-19 pandemic in London (UK) from urban context.

COVID-19 transmission in London city was discussed in this work from an urban context. The association between COVID-19 cases and climate indicators in London, UK were analysed statistically employing published data from national health services, UK and Time and Date AS based weather data. The climatic indicators included in the study were the daily averages of maximum and minimum temperatures, humidity, and wind speed. Pearson, Kendall, and Spearman rank correlation tests were selected for data analysis. The data was considered up to two different dates to study the climatic effect (10th May in the first study and then updated up to 16th of July in the next study when the rest of the data was available). The results were contradictory in the two studies and it can be concluded that climatic parameters cannot solely determine the changes in the number of cases in the pandemic. Distance from London to four other cities (Birmingham, Leeds, Manchester, and Sheffield) showed that as the distance from the epicentre of the UK (London) increases, the number of COVID-19 cases decrease. What should be the necessary measure to be taken to control the transmission in cities have been discussed.

Hydrophilic and Superhydrophilic Self-Cleaning Coatings by Morphologically Varying ZnO Microstructures for Photovoltaic and Glazing Applications.

Transparent, superhydrophilic materials are indispensable for their self-cleaning function, which has become an increasingly popular research topic, particularly in photovoltaic (PV) applications. Here, we report hydrophilic and superhydrophilic ZnO by varying the morphology for use as a self-cleaning coating for PV applications. Three different ZnO microstructures, such as ZnO nanorods (R-ZnO), ZnO microflowers (F-ZnO), and ZnO microspheres (M-ZnO), were developed by hydrothermal methods. The surface morphology by using X-ray diffraction (XRD), wettability behavior by using water contact angle (WCA) measurements, structural and optical properties by using photoluminescence (PL), Raman, and UV-vis spectrophotometry, and defect estimation by using X-ray photoelectron spectroscopy (XPS) of the ZnO nanostructured films were systematically investigated. XRD confirmed the formation of the hexagonal wurtzite structure of ZnO. The average crystallite sizes of prepared R-ZnO, F-ZnO, and M-ZnO were found to be 28.95, 11.19, and 41.5 nm, respectively. The band gap values of ZnO nanostructures were calculated from the UV-vis absorption spectrum and found to be 3.6, 3.3, and 3.1 eV for R-ZnO, F-ZnO, and M-ZnO, respectively. The WCAs for R-ZnO and F-ZnO were 20.2 and 11.19°, respectively, while M-ZnO behaved like a superhydrophilic material having a WCA of 2.8°.

How India is dealing with COVID-19 pandemic.

India, which has the second-largest population in the world is suffering severely from COVID-19 disease. By May 18th, India investigated ∼1 lakh (0.1million) infected cases from COVID-19, and as of 11th July the cases equalled 8 lakhs. Social distancing and lockdown rules were employed in India, which however had an additional impact on the economy, human living, and environment. Where a negative impact was observed for the economy and human life, the environment got a positive one. How India dealt and can potentially deal with these three factors during and post COVID-19 situation has been discussed here.