Derivatization-free sustainable spectrofluorimetric estimation of antihistamine drug mizolastine in pharmaceutical and biological matrices.

Mizolastine is an antihistamine drug that is commonly used for treatment of chronic urticaria and allergic rhinitis. In this study, a facile, rapid, and sustainable fluorimetric method was established for the estimation of mizolastine in pharmaceutical and biological matrices for the first time. The approach methodology relied on the direct assessment of mizolastine's intrinsic fluorescence at 313 nm after excitation at 272 nm. This intrinsic fluorescence, stemming from the benzimidazole fluorophore moiety in mizolastine structure, serves as a distinctive marker for its precise quantification in the spiked human plasma and pharmaceutical formulations with high %recovery. The method exhibits reasonable sensitivity with lower limits of detection and quantification of 5.4 and 16.6 ng mL-1, respectively, across a concentration range of 25.0-2000.0 and 50-1000 ng mL-1 for the standard mizolastine analysis and mizolastine assay in the plasma sample, respectively. Moreover, the established method was applied to assess tablet content uniformity and mizolastine assay in plasma samples with high recoveries (98.50%-100.20%). Such applications underscore the method's potential applicability within quality control laboratories, preventing the need for sample preparation or laborious extraction steps. Finally, the method's sustainability and practicality were confirmed by applying different greenness and whiteness metrics, yielding excellent results.

Facile, eco-friendly and sensitive fluorimetric approach for detection of chlorpromazine: Application in biological fluids and tablet formulations as well as greenness evaluation of the analytical method.

Monitoring antipsychotic drugs in biological fluids, such as human serum and urine, is important for ensuring the safety and efficacy of psychiatric treatments. This process helps maintain therapeutic drug levels, minimize side effects, and optimize patient well-being. Chlorpromazine (CZ) is a widely prescribed antipsychotic drug used for conditions like schizophrenia, bipolar disorder, and acute psychosis. Almost all existing sensing techniques for CZ are either insensitive spectrophotometric methods or involve long and complex chromatographic procedures, limiting their routine use. In this work, we introduce a facile, green, and sensitive fluorimetric strategy with high reproducibility for detecting CZ in its pure form, tablet formulation, and spiked human plasma and urine without the need for derivatization reactions. The proposed method relies on the inhibition of the intramolecular photoinduced electron transfer (PET) effect by using 2.0 M acetic acid. This approach enables the linear detection of CZ from 3.0 to 600 ng/mL with remarkably low quantitation and detection limits of 1.51 and 0.49 ng/mL, respectively. Moreover, the developed method's greenness was evaluated.

Sustainable and Green Fluorescence Method for the Determination of Cloperastine in Human Plasma: Greenness Assessment.

A newly green method for the sensitive quantification of cloperastine, a cough suppressant, in spiked human plasma and its pharmaceutical formulation was designed for the first time. The established method depends on the enhancement of the weak fluorescence of cloperastine using 50 mM sulfuric acid to impair the photoinduced electron transfer produced from the nitrogen atom of piperidine moiety in cloperastine. This full protonation in an acid medium leads to an enhancement in the fluorescence of cloperastine, permitting its linear determination from 0.2 to 5.0 µg/mL with LOD and LOQ of 0.04 and 0.13 µg/mL, respectively. Moreover, the studied drug was estimated in its pharmaceutical market formulations as well as spiked human plasma. Furthermore, the greenness of the described method was evaluated.

Full green assay of parenteral dosage forms of polymyxins utilizing xanthene dye: application to content uniformity testing.

Due to the lack of other treatment options, a rebirth of polymyxins is urgently required. Colistin (also called polymyxin E) and polymyxin B are the only two examples of this antibiotic class that were effectively employed in such critical situations. In the present work, both of the two studied medications were quantified via a simple, green, and non-extracting spectrophotometric approach based on the formation of ion-pair complexes with Erythrosine B. Without using any organic solvents, the pink color of the created complexes was detected at wavelength = 558 nm. To achieve the highest intensity of absorbance, optimum conditions were established by the screening of many experimental factors such as pH, buffer volume, the volume of Erythrosine B, and the time consumed to undergo the reaction. For Colistin and Polymyxin B respectively, Beer-Lambert's law was observed at the concentration ranges of 1-6, 1-9 µg mL- 1. The technique was approved and validated following ICH recommendations. Lastly, the suggested approach has been successfully implemented to quantify the cited medications colorimetrically, for the first time, in their parenteral dosage forms with excellent recoveries. Also, Content uniformity testing was implemented.

A highly sensitive spectrofluorimetric method for the determination of bilastine in human plasma: Application of content uniformity testing.

Bilastine, a new second generation antihistaminic drug, has been widely used for relieving symptoms of allergic rhinitis and urticaria without a sedative effect. A simple, cost-effective, and highly sensitive fluorimetric method was developed for the estimation of bilastine in human plasma, in addition to its pure state and tablets. The suggested method depended on binary complex formation of eosin with bilastine in a buffered medium at pH 4.2. The formed complex resulted in quantitative quenching of eosin emission at 538 nm after excitation at 335 nm. This method demonstrates a broad range of linearity, spanning from 200 to 1000 ng/mL, and exhibits exceptional sensitivity, with a limit of detection and quantitation of 30.85 and 93.48 ng/mL, respectively. In addition, this spectrofluorimetric method may be employed to determine the amount of bilastine in human plasma and tablets with satisfactory accuracy and excellent precision. Furthermore, the content uniformity of bilastine in commercially available tablets was successfully tested by this approach. Compared with the reference method, there were no significant variations in terms of precision or accuracy. In conclusion, the proposed protocol is highly recommended to quantitatively estimate bilastine in different quality control settings.

Green and sensitive detection of olopatadine in aqueous humor using a signal-on fluorimetric approach: GREEnness assessment.

Olopatadine (OLP) is widely utilized as an effective antihistaminic drug for alleviating ocular itching associated with allergic conjunctivitis. With its frequent usage in pharmacies, there arises a pressing need for a cost-effective, easily implementable, environmentally sustainable detection method with high sensitivity. This study presents a novel signal-on fluorimetric method for detecting OLP in both its pure form and aqueous humor. The proposed approach depends on enhancing the weak intrinsic fluorescence emission of OLP, achieving a remarkable increase of up to 680% compared to its intrinsic fluorescence. This enhancement is achieved by forming micelles around protonated OLP using an acetate buffer (pH 3.6) and incorporating a solution of sodium dodecyl sulfate (SDS) surfactant. A strong correlation (R = 0.9996) is observed between the concentration of OLP and fluorescence intensities ranging from 1.0 to 100.0 ng mL-1 with a limit of detection of 0.22 ng mL-1. This described method is successfully employed for quantifying OLP in both its powder form and pharmaceutical eye drops. Furthermore, it demonstrates robust performance in determining OLP in artificial aqueous humor with a percentage recovery of 99.05 ± 1.51, with minimal interference from matrix interferents. Moreover, the greenness of the described method was evaluated.

Fine-tuning Fluorescence of Amlodipine Adopting on Blocking of Photoinduced Electron Transfer (PET): Application in Human Plasma.

Assessing medication adherence through the determination of antihypertensive drugs in biological matrices holds significant importance. Amlodipine (AP), a potent antihypertensive medication extensively prescribed for hypertensive patients, is particularly noteworthy in this context. This article aims to introduce a rapid, simple, improved sensitivity, and reproducibility in detecting AP in its pure form, tablet formulation, and spiked human plasma than the other reported methods. The proposed method utilizes a fluorescence approach, relying on the inhibition of the intramolecular photoinduced electron transfer (PET) effect of the lone pair of the N-atom in the primary amino moiety of AP. This inhibition is achieved by acidifying the surrounding medium using 0.2 M acetic acid. By blocking PET, the target AP drug is sensitively detected, at [Formula: see text] 423 nm over a concentration range 25-500 ng mL- 1 showcasing an exceptionally low quantitation limit of 1.41 ng mL- 1. Notably, this innovative technique was successfully applied to detect AP in its solid dosage form and spiked human plasma. Remarkably, matrix interference was found to be insignificant, underscoring the robustness and applicability of the established approach. The combination of speed, sensitivity, and reproducibility makes this method particularly suitable for assessing medication adherence in patients prescribed AP for hypertension.

Condensation methodology for quantification of Polymyxin B fluorimetrically: application to pharmaceutical formulations and greenness assessment.

The appearance of multidrug-resistant Gram-negative bacterial infections, along with the lack of newly discovered antibiotics, resulted in the return to old antimicrobial medications like Polymyxins. As a result, the suggested technique aims to develop a fast, environmentally friendly, and sensitive fluorimetric method for quantifying Polymyxin B. The investigated approach depends on generating a highly fluorescent derivative by a condensation pathway between the studied drug and ninhydrin in the presence of phenylacetaldehyde and then estimated spectrofluorimetrically. After the reaction conditions were well optimized, the fluorescent product was estimated at emission wavelength (λem) = 475.5 nm (following excitation at a wavelength (λex) = 386 nm. The developed calibration plot displayed rectilinear throughout the following range (0.2-3 µg mL- 1), and the calculated limit of detection and quantification were 0.062 µg mL- 1 and 0.187 µg mL- 1, respectively. As a consequence, the drug's ophthalmic and intravenous pharmaceutical forms were both successfully quantified with an excellent degree of recovery. Finally, the methodology's greenness was assessed utilizing Analytical Eco-Scale scores.

Green and inventive fluorescence approach for levodropropizine determination in human plasma.

A green, rapid and sensitive fluorimetric method to quantify levodropropizine (LVP) in human plasma was exploited for the first time. The proposed method adopts LVP's intrinsic fluorescence in distilled water at a detecting emission of 345 nm following excitation at 240 nm. LVP displayed linearity across concentrations ranging from 50 to 1000 ng mL-1, with a detection limit of 0.77 ng mL-1 and a quantification limit of 2.33 ng mL-1. Thorough validation confirmed its reliability, successfully determining LVP in tablets with an average recovery of 98.64 ± 1.07 %. Furthermore, the method's applicability extended to estimate the studied drug in spiked human plasma with excellent obtained percentage recoveries (98.68 ± 1.28-100.14 ± 1.23).

Improving fluorescence emission of cyproheptadine by hindering its intramolecular photoinduced electron transfer (PET): Application to content uniformity testing and human plasma.

The ability to determine antihistaminic drugs in biological matrices is critical for the medication adherence assessment. Among these antihistaminic medications, cyproheptadine (CPD); that is acting as a potent first-generation antihistaminic drug that has been extensively prescribed for allergic patients. Most of the established approaches for CPD detection are not appropriate for this purpose owing to their weak sensitivity, lack of rapidity, and complicated experimental procedures. Herein, we present a very fast, highly sensitive, and reproducible approach for the detection of CPD in its pure form, tablet formulation, and spiked human plasma. The photoluminescence approach depends on hindering the intramolecular photoinduced electron transfer (PET) effect of the lone pair of the N-atom present on the piperidine ring of CPD by making the surrounding medium acidic using 1.0 M acetic acid. Based on blocking PET, the target CPD drug has been sensitively detected from 5.0 to 500 ng mL-1 with a very low detection and quantitation limit of 7.01 and 21.25 ng mL-1, respectively. Moreover, the established approach was used for checking the tablet content uniformity testing for each tablet and spiked human plasma, and noteworthy, the matrices interference was insignificant.

Simultaneous Determination of Ceftazidime in Three Different Pharmaceutical Preparations Combined with Either Tazobactam, Tobramycin or Sulbactam by HPTLC-Spectrodensitometric Method.

A new, simple hight performance thin layer chromatography (HPTLC)-Spectrodensitometric strategy was created and approved for the synchronous estimation of four antibacterial specialists: ceftazidime (CEF), tazobactam (TAZ), tobramycin (TOB) and sulbactam (SUL). The four compounds were separated on TLC aluminum plates covered with silica gel 60 F254, using chloroform-acetonitrile-methanol-ammonia (4:1:0.5:0.15, v/v/v/v) as a mobile phase at 254 nm. Linear correlation was obeyed over the concentration ranges of 12.0-72.0, 2.0-12.0, 3.0-18.0 and 10.0-50.0 µg mL-1 for CEF, TAZ, TOB and SUL, respectively. The proposed approach is efficient, repeatable and convenient as a flexible method for the quality control of diverse combinations of these pharmaceuticals in various pharmaceutical preparations, with high percent recoveries that are highly consistent with labeled data. When the findings of the proposed technique were compared to those of the comparison methods, there were no critical contrasts in terms of precision and accuracy.

Feasible spectrofluorimetric approach for the ultrasensitive determination of lomefloxacin based on synergistic effects of micellization and metal complexation.

The purpose of the present work was to establish a fast and convenient strategy for lomefloxacin analysis using a fluorimetric approach. The methodology was based on the complex formation of the drug with aluminum ion to give a product having high fluorescence. Adding sodium dodecyl sulfate led to further boosting the intensity of fluorescence which was recorded at 429 nm after excitation at 332 nm. The relationship of emission intensity with lomefloxacin concentration was linear at 10-130 ng mL-1 with a correlation coefficient of 0.9996. The quantitation limit was 11.4 ng mL-1 and detection limit was 3.8 ng mL-1. The reaction conditions were carefully studied which included the pH, buffer type, its concentration, the type and concentration of surfactant and the diluting solvent. The method was utilized to quantify the aforementioned drug in tablet formulations and in real human plasma with high accuracy and reliability.

New validated spectrofluorimetric protocol for colistin assay through condensation with 2,2-dihydroxyindan-1,3-dione: application to content uniformity testing.

A new, cost-effective and sensitive spectroscopic assay for the quantification of Colistin Sulfate (CS) and its prodrug colistimethate sodium (CMS) has been developed and validated. The validated technique depends on the condensation of the studied drug with 2,2-dihydroxyindan-1,3-dione (ninhydrin) and phenylacetaldehyde using Teorell and Stenhagen buffer (pH = 6) to yield a fluorescent product that is estimated at emission wavelength (λ em = 474 nm) after excitation wavelength (λ ex = 390 nm). The reaction's affecting factors were carefully studied and adjusted accurately. Over the following range (0.4-2.4 µg mL-1), the produced calibration plot looked rectilinear, and the estimated limits of detection and quantification (LOD and LOQ) were 0.051 & 0.154 µg mL-1 respectively. The recommended approach was utilized to evaluate market products containing the investigated drug. Moreover, content uniformity testing was employed as a new procedure not found in the previously reported fluorimetric technique.

Micelle-enhanced spectrofluorimetric method for the rapid determination of bronchodilator terbutaline and its prodrug bambuterol: application for content uniformity test.

A novel, simple and sensitive spectrofluorimetric approach for determination of terbutaline sulphate (TER) and its prodrug bambuterol (BAM) in their pure and pharmaceutical dosage forms was developed. The suggested approach depends on enhancing the native fluorescence of either TER or BAM at 315 and 297.2 nm after excitation at 277 and 259 nm, respectively, using sodium dodecyl sulphate (SDS) as a micellar medium. In the presence of 0.7% w/v SDS, ~1.38-fold and 1.18-fold enhancement is achieved in the relative fluorescence intensity (RFI) of TER and BAM, respectively. The fluorescence-concentration curves were rectilinear over the concentration range 0.8-16 µg ml-1 , with detection limits (LOD) of 0.252 and 0.26 (µg ml-1 ), quantitation limits (LOQ) of 0.76 and 0.79 (µg ml-1 ), determination coefficients (r2) of 0.9981, and slopes of 45.92 and 10.44 for TER and BAM, respectively. The suggested approach was validated in accordance with International Council for Harmonisation criteria and was effectively applied in the analysis of the studied drugs in their commercial tablets. The high sensitivity of the proposed approach allows its application in evaluating the content uniformity testing of the studied drugs in their tablets through using the official United States Pharmacopeia criteria. Statistical analogies of the findings with that of the reported methods showed really good harmony and indicated no major differences in precision and accuracy.

Salvage parenteral antibiotics for multidrug-resistant (MDR) Gram-negative bacteria; a fluorescamine-based technique for ultrasensitive spectrofluorimetric measurement of Polymyxins; human plasma application.

Polymyxins (PMS), namely Colistin (CS) and polymyxin B (poly B), are antimicrobial drugs that have been recently used to treat multiresistant Gram-negative bacteria infections and their resurgence, owing to a lack of new antibiotics. A speedy, simple, and ultrasensitive spectrofluorimetric screening of PMS in pharmaceutical formulations and biological fluids was urgently required from this point forwards. A reaction between fluorescamine and the aliphatic amino moiety found in both drugs was performed in a slightly alkaline borate buffer (pH 8.5) resulted in highly fluorescent products measured at λem 460 (after λex 390.5 nm). Linear calibration curves were constructed over the concentration range 70-1800 ng ml-1 and 100 to 1400 ng ml-1 , with slope values of 0.273 and 0.286, correlation coefficients of 0.9998 and 0.9997, and determination coefficient of 0.9997 and 0.9994 for poly B and CS, respectively. The ultrasensitivity of the proposed method was demonstrated by the very low limit of quantification values of 67.56 ng ml-1 and 94.89 ng ml-1 for poly B and CS, respectively. The cited drugs were successfully determined in their intravenous market preparations by the prescribed method. Moreover, due to the high sensitivity, the suggested method was used to assay the investigated drugs in biological fluids.

Micellar Thin Layer Chromatography and Computer-Aided Analysis of Empagliflozin, Linagliptin and Metformin HCl Ternary Mixture.

The present work was performed in order to study the mechanism of micellar thin layer chromatography (MTLC) and to develop a new simple and sensitive simultaneous MTLC method for separation of empagliflozin, Linagliptin and metformin hydrochloride ternary mixture. The study was done using three different surfactants; sodium dodecyl sulphate (SDS), benzalkonium chloride (BAC) and polysorbate 80 (tween 80). Chromatographic procedure was performed using micellar mobile phase that composed of aqueous solution of each surfactant and methanol (6: 4 v/v) and micellar TLC determination at λmax 237 nm. Separation using SDS (anionic surfactant) and BAC (cationic surfactant) depends on ionization potential (AMI-IP), partition coefficient (logP (o/w)) and hydrogen bond donor atoms (a-don), whereas separation using tween 80 depends mainly on the lipophilicity (RM0), solvation energy (E-sol) and Van der Waals energy (E-vdw). Quantitative structure-retention relationships study was carried out, modeled, evaluated and validated using molecular operating environment software.

Selective Spectrofluorimetric Protocol for Determination of Commonly Used Gram-negative Bactericidal Drug in Combined Pharmaceutical Dosage Forms and Human Plasma.

Gram-negative bacteria cause infections such as skin infection, meningitis, and pneumonia in human being. Gram-negative bacteria are highly resistant to most availaible bactericidal drugs. One of the most commonly used Gram-negative bactericidal drug is Polymyxin B sulfate (PMS). In addition, it is used in cases of highly resistant Gram-negative bacterial infections. The widespread of PMS necessitate the development of an exceedingly sensitive and selective fluorimetric assay for its determination in pure form, different pharmaceutical dosage forms, and human plasma. The presented method is used to determine PMS in their dosage form (vials) and combined pharmaceutical formulations (skin and eye ointments) with a high degree of accuracy and selectivity. The described procedure relies on the structure of a derivative of a high degree of fluorescence called dihydropyridine, via the condensation of the amino moiety of PMS with two equivalents of acetylacetone in the presence of formaldehyde and Teorell buffer (pH = 3). The fluorescent product was measured at 471 nm (λex = 402 nm). The linearity ranged from 100-3000 ng mL-1 of PMS with an excellent r2 of 0.9998. LOD and LOQ were 27.16 ng mL-1 and 82.30 ng mL-1, respectively. Owing to the developed method's high selectivity, it was successfully utilized for assay of PMS, in the ointment, in the presence of oxytetracycline as an active ingredient. Furthermore, the procedure applied for the estimation of parenteral PMS in human plasma with very good mean recovery 97.42 ± 1.46.

Benzofurazan -based fluorophore for the spectrofluorimetric determination of 6-Aminocaproic acid: Application to spiked human plasma and urine.

6-Aminocaproic acid is one of the most widely used antihemorrhagic and antifibrinolytic agent, therefore, it is essential to create a novel, sensitive, low cost and straightforward spectrofluorimetric method for its determination. The nucleophilic substitution interaction between the primary amine of 6-aminocaproic acid with 4-chloro-7-nitro benzofurazan (NBD-Cl) generated a yellow product. The reaction proceeded in borate buffer (pH 9) and its fluorescence has been measured at 525 nm after excitation at 472 nm. All of the parameters that have impact on the performance of the developed method were investigated and optimized. The range of linearity was 0.1-0.7 µg/mL while, the quantitation limit was down to 0.101 µg/mL and limit of detection was 0.033 µg/mL. This approach was effectively employed to evaluate the content of 6-aminocaproic acid in laboratory prepared dosage form with average percentage recovery of 100.19 ± 0.72% without any interference from basic excipients. Moreover, the proposed method was extended to determine 6-aminocaproic acid in spiked human plasma and urine.

Sensitivity improvement for spectrofluorimetric determination of commonly used antifungal drug 'nystatin': application for oral suspension.

In this paper, two simple, rapid and highly sensitive spectrofluorimetric methods were developed and validated for nystatin determination in its pure form and pharmaceutical dosage form (oral suspension). The first method was based on measuring the nystatin native fluorescence after dilution with isopropyl alcohol at 407 nm (excitation 303 nm). The fluoresence intensity was linearly dependant on the nystatin concentration within the specified range 50-500 ng ml-1 . The second was based on micellar enhancement of nystatin fluorescence using sodium dodecyl sulphate (SDS). In the presence of 2% w/v SDS, an ~1.9-fold enhancement could be achieved in the relative fluorescence intensity of nystatin. The linear range for the second method was 20-100 ng ml-1 . The limits of quantification and detection were found to be 43.23 ng ml-1 and 14.27 ng ml-1 (Method I), 6.08 ng ml-1 and 2.0 ng ml-1 (Method II). According to percentage recoveries and relative standard deviations (RSDs) obtained, the proposed methods were precise (RSDs were less than 2%), reproducible, and accurate and could be successfully applied for quantitative estimation of nystatin in its dosage form. The statistical results of this method were compared with that of the reported method and showed excellent agreement with respect to accuracy and precision.

A novel spectrofluorimetric method for determination of lomefloxacin adopting on zinc(II) chelation strategy: Application in human plasma.

A new sensitive and instantaneous spectrofluorimetric method for efficient determination of lomefloxacin (LMX) in its pure, dosage form and human plasma was designed. The developed method depends on formation of a metal-chelation compound of LMX as a ligand with zinc(II) in a buffer of acetate (pH 5.5). The following parameters; type of metal, concentration of metal, pH, type of buffer and diluting solvent were optimized. After carefully investigation; 0.2 mM zinc, 2.0 ml acetate buffer (pH 5.5) and water as diluting solvent were set as optimum reaction conditions. Under these conditions, a large increase in the intensity of the fluorescence of LMX was attained at 450 after excitation at 284 nm. The limits of detection and quantification were 5.8 and 1.9 ng ml-1 , respectively, with linearity range of 10.0 to 500.0 ng ml-1 . The binding mode of LMX and zinc(II) ion (Zn2+ ) was found to be 2:1, respectively, and confirmed by Job's plot method. Furthermore, it extended to the analysis of LMX in the spiked plasma of humans with percentage recovery (98.70 ± 0.97 to 100.30 ± 1.69%, n = 3).