Fulvenallenyl Radical (C7H5·)-Mediated Gas-Phase Synthesis of Bicyclic Aromatic C10H8 Isomers: Can Fulvenallenyl Efficiently React with Closed-Shell Hydrocarbons?

To understand the reactivity of resonantly stabilized radicals, often found in relevant concentrations in gaseous environments, it is important to determine their main reaction pathways. Here, it is investigated whether the fulvenallenyl radical (C7H5·) reacts preferentially with closed-shell molecules or radicals. Electronic structure calculations on the C10H9 potential energy surface accessed by the reactions of C7H5· with methylacetylene (CH3CCH) and allene (H2CCCH2) were combined with RRKM-ME calculations of temperature- and pressure-dependent rate constants using the automated EStokTP software suite and kinetic modeling to assess the reactivity of C7H5· with closed-shell unsaturated hydrocarbons. Experimentally, the reactions were attempted in a chemical microreactor heated to 998 ± 10 K by preparing fulvenallenyl radicals via pyrolysis of trichloromethylbenzene (C7H5Cl3) and seeding the radicals in methylacetylene or allene carrier gas, with product identification by means of photoionization mass spectrometry. The measured photoionization efficiency curve of m/z = 128 was assigned to a linear combination of the reference curves of two C10H8 isomers, azulene (minor) and naphthalene (major), presumably resulting from the C7H5· plus C3H4 reactions. However, the calculations demonstrated that these reactions are too slow, and kinetic modeling of processes in the reactor allowed us to conclude that the observation of naphthalene and azulene is due to the C7H5· plus C3H3· reaction, where propargyl is produced by direct hydrogen atom abstraction by chlorine (Cl) atoms from allene or methylacetylene and Cl stem from the pyrolysis of C7H5Cl3. Modeling results under the copyrolysis conditions of toluene and methylacetylene in high-temperature shock tube experiments confirmed the prevalence of the fulvenallenyl reaction with propargyl over its reactions with C3H4 even when the concentrations of allene and methylacetylene largely exceed that of propargyl. Overall, the reactions of fulvenallenyl with both allene and methylacetylene were found to be noncompetitive in the formation of naphthalene and azulene thus attesting the inefficiency of the fulvenallenyl radical reactions with the prototype closed-shell hydrocarbon species. In the meantime, the new reaction pathways revealed, including H-assisted isomerizations between C10H8 isomers and decomposition reactions of various C10H9 isomers, emerge as relevant and are recommended for inclusion in combustion kinetic models for naphthalene formation.

Radical Stereochemistry: Accounting for Diastereomers in Kinetic Mechanism Development.

Recent work in combustion and atmospheric chemistry has revealed cases in which diastereomers must be distinguished to accurately model a reacting flow. This paper presents an open-source framework for introducing such stereoisomer resolution into a kinetic mechanism. We detail our definitions and algorithms for labeling and enumerating the stereoisomers of a molecule and then generalize our system to describe the transition state (TS) of a reaction. This allows for the stereospecific enumeration of reactants and products while accounting for "fleeting" stereochemistry that is unique to the TS. We also present the AutoMech Chemical Identifier (AMChI), an InChI-like string identifier that accounts for stereocenters omitted by InChI. This identifier is extended to describe the TSs of reactions, providing a universal lookup key for specific reaction channels. The final piece of our methodology is an analytic formula to remove redundancy from a stereoresolved mechanism when its enantiomers exist as a racemic mixture, making it as compact as possible while fully accounting for the differences between diastereomers. In applying our methodology to two subsets of the NUIGMech1.1 mechanism, we find that our approach reduces the extra species added for large-fuel oxidation from 2231 (133%, full expansion) to 694 (41%, nonredundant expansion). We also find that for pyrolysis more than a quarter of the species in the expanded mechanism cannot be properly described by an InChI string, requiring an AMChI string to communicate their identity. Finally, we find that roughly one-quarter of the large-fuel oxidation reactions and one-third of the pyrolysis reactions include fleeting TS stereochemistry, which may have relevant effects on their kinetics.

Investigation of Methylcyclopentadiene Reactivity: Abstraction Reactions and Methylcyclopentadienyl Radical Unimolecular Decomposition.

Understanding the reactivities of methylcyclopentadiene and the methylcyclopentadienyl radical is important in order to improve our comprehension of the chemical kinetics leading to the formation, decomposition, and growth of the first aromatic ring, as it has been shown that five-membered-ring species are important intermediates in the reaction kinetics of aromatic species. In this work, the rate constants of some key H-abstraction reactions from methylcyclopentadiene to produce the methylcyclopentadienyl radical and the formation of fulvene and benzene from the latter are theoretically determined. Rate constants are evaluated using the ab initio transition state theory-based master equation approach, determining structures and Hessians of all stationary points at the ωB97X-D/aug-cc-pVTZ level, energies at the CCSD(T) level extrapolated to the complete basis set limit, RRKM rate constants using conventional and variational transition state theory, and phenomenological rate constants through the solution of the one-dimensional master equation. Variational corrections are determined in both internal and Cartesian coordinates, and it is found that the choice of the coordinate system can impact the accuracy of the calculated rate constants by up to a factor of 4 for H-abstraction reactions and 2 for the unimolecular decomposition of the methylcyclopentadienyl radical. The calculated rate constants are in good agreement with the available literature data. Prompt dissociation of methylcyclopentadienyl radicals accessed following H-abstraction from methylcyclopentadiene was also investigated, and the corresponding rate constants were determined; the results show that prompt dissociation plays a key role under combustion conditions. Finally, lumping of theoretically derived rate constants to account for methylcyclopentadiene ⇄ methylcyclopentadienyl tautomerism allowed the derivation of a simplified set of rate constants suitable to be inserted into kinetic mechanisms.

Theoretical Study of the Extent of Intersystem Crossing in the O(3P) + C6H6 Reaction with Experimental Validation.

The extent of intersystem crossing in the O(3P) + C6H6 reaction, a prototypical system for spin-forbidden reactions in oxygenated aromatic molecules, is theoretically evaluated for the first time. Calculations are performed using nonadiabatic transition-state theory coupled with stochastic master equation simulations and Landau-Zener theory. It is found that the dominant intersystem crossing pathways connect the T2 and S0 potential energy surfaces through at least two distinct minimum-energy crossing points. The calculated channel-specific rate constants and intersystem crossing branching fractions differ from previous literature estimates and provide valuable kinetic data for the investigation of benzene and polycyclic aromatic hydrocarbons oxidation in interstellar, atmospheric, and combustion conditions. The theoretical results are supported by crossed molecular beam experiments with electron ionization mass-spectrometric detection and time-of-flight analysis at 8.2 kcal/mol collision energy. This system is a suitable benchmark for theoretical and experimental studies of intersystem crossing in aromatic species.

Electronic structure-based rate rules for ipso addition-elimination reactions on mono-aromatic hydrocarbons with single and double OH/CH3/OCH3/CHO/C2H5 substituents: a systematic theoretical investigation.

The recent interest in bio-oils combustion and the key role of mono-aromatic hydrocarbons (MAHs) in existing kinetic frameworks, both in terms of poly-aromatic hydrocarbons growth and surrogate fuels formulation, motivates the current systematic theoretical investigation of one of the relevant reaction classes in MAHs pyrolysis and oxidation: ipso substitution by hydrogen. State-of-the-art theoretical methods and protocols implemented in automatized computational routines allowed to investigate 14 different potential energy surfaces involving MAHs with hydroxy and methyl single (phenol and toluene) and double (o-,m-,p-C6H4(OH)2, o-,m-,p-CH3C6H4OH, and o-,m-,p-C6H4(CH3)2) substituents, providing rate constants for direct implementation in existing kinetic models. The accuracy of the adopted theoretical method was validated by comparison of the computed rate constants with the available literature data. Systematic trends in energy barriers, pre-exponential factors, and temperature dependence of the Arrhenius parameters were found, encouraging the formulation of rate rules for ipso substitutions on MAHs. The rules here proposed allow to extrapolate from a reference system the necessary activation energy and pre-exponential factor corrections for a large number of reactions from a limited set of electronic structure calculations. We were able to estimate rate constants for other 63 ipso addition-elimination reactions on di-substituted MAHs, reporting in total 75 rate constants for ipso substitution reactions o-,m-,p-R'C6H4R + → C6H5R + ', with R,R' = OH/CH3/OCH3/CHO/C2H5, in the 300-2000 K range. Additional calculations performed for validation showed that the proposed rate rules are in excellent agreement with the rate constants calculated using the full computational protocol in the 500-2000 K range, generally with errors below 20%, increasing up to 40% in a few cases. The main results of this work are the successful application of automatized electronic structure calculations for the derivation of accurate rate constants for ipso substitution reactions on MAHs, and an efficient and innovative approach for rate rules formulation for this reaction class.

Combined Experimental and Theoretical Studies of the O(3P) + 1-Butene Reaction Dynamics: Primary Products, Branching Fractions, and Role of Intersystem Crossing.

Information on the detailed mechanism and dynamics (primary products, branching fractions (BFs), and channel specific rate constants as a function of temperature) for many important combustion reactions of O(3P) with unsaturated hydrocarbons is still lacking. We report synergistic experimental/theoretical studies on the mechanism and dynamics of the O(3P) + 1-C4H8 (1-butene) reaction by combining crossed molecular beam (CMB) experiments with soft electron ionization mass-spectrometric detection and time-of-flight analysis at 10.5 kcal/mol collision energy (Ec) to high-level ab initio electronic structure calculations of the underlying triplet and singlet potential energy surfaces (PESs) and statistical Rice-Ramsperger-Kassel-Marcus/Master Equation (RRKM/ME) computations of BFs including intersystem crossing (ISC). The reactive interaction of O(3P) with 1-butene is found to mainly break apart the 4-carbon atom chain, leading to the radical product channels ethyl + vinoxy (BF = 0.34 ± 0.11), methyl + C3H5O (BF = 0.28 ± 0.09), formyl + propyl (BF = 0.17 ± 0.05), ethyl + acetyl (BF = 0.014 ± 0.007), and butanal radical (ethylvinoxy) + H (BF = 0.013 ± 0.004), and molecular product channels formaldehyde + propenylidene/propene (BF = 0.15 ± 0.05) and butenone (ethyl ketene) + H2 (BF = 0.037 ± 0.015). As some of these products can only be formed via ISC from triplet to singlet PESs, from BFs an extent of ISC of 50% is inferred. This value is significantly larger than that recently observed for O(3P) + propene (22%) at similar Ec, underlying the question of how important it is to consider nonadiabatic effects for these and similar combustion reactions. Comparison of the derived BFs with those of statistical (RRKM/ME) simulations on the ab initio coupled triplet/singlet PESs shows good agreement, warranting the use of the RRKM/ME approach to provide information on the variation of BFs with temperature and to derive channel specific rate constants as a function of temperature (T) and pressure (p). Notably, ISC is predicted to decrease strongly with increasing temperature (from about 70% at 300 K to 46% at Ec = 10.5 kcal/mol, and about 1% at 2000 K). The present results lead to a detailed understanding of the complex reaction mechanism of O(3P) + 1-butene and, by providing channel specific rate constants as a function of T and p, should facilitate the improvement of current fossil-fuel (1-butene) as well as biofuel (1-butanol) combustion models.