Evaluation of genotype by environment interaction and adaptability in lowland irrigated rice hybrids for grain yield under high temperature.

Recent predictions on climate change indicate that high temperature episodes are expected to impact rice production and productivity worldwide. The present investigation was undertaken to assess the yield stability of 72 rice hybrids and their parental lines across three temperature regimes over two consecutive dry seasons using the additive main effect and multiplicative interaction (AMMI), genotype and genotype × environment interaction (GGE) stability model analysis. The combined ANOVA revealed that genotype × environment interaction (GEI) were significant due to the linear component for most of the traits studied. The AMMI and GGE biplot explained 57.2% and 69% of the observed genotypic variation for grain yield, respectively. Spikelet fertility was the most affected yield contributing trait and in contrast, plant height and tiller numbers were the least affected traits. In case of spikelet fertility, grain yield and other yield contributing traits, male parent contributed towards heat tolerance of the hybrids compared to the female parent. The parental lines G74 (IR58025B), G83 (IR40750R), G85 (C20R) and hybrids [G21 (IR58025A × KMR3); G3 (APMS6A × KMR3); G57 (IR68897A × KMR3) and G41 (IR79156A × RPHR1005)] were the most stable across the environments for grain yield. They can be considered as potential genotypes for cultivation under high temperature stress after evaluating under multi location trials.

Estimation of boswellic acids in herbal formulations containing Boswellia serrata extract and comprehensive characterization of secondary metabolites using UPLC-Q-Tof-MSe / 药物分析学报

Boswellia serrata is a widely used herb in Indian systems of medicine and is well known for its potential medicinal properties. A chromatographic method was developed for the analysis and quantification of six boswellic acid marker compounds, i.e., keto boswellic acid (1), 3-O-Acetyl 11-keto β-boswellic acid (2), ɑ-Boswellic acid (3), β-Boswellic acid (4), 3-O-Acetyl-ɑ-boswellic acid (5) and 3-O-Acetyl-β-boswellic acid (6) in commercial herbal products containing B. serrata as an ingredient. Combining UPLC with Q-Tof-MS/MS makes the better identification of secondary metabolites and adulterants in the herbal formulations containing B. serrata in rapid time using fragmentation approach than the traditional approaches. In this study quantification of boswellic acids with UPLC-PDA method was performed as per the pharmacopeia guidelines. Furthermore, minor phytochemical constituents were identified and characterized with the help of LC-Q-Tof-MS/MS fragmentation data and various isoforms of boswellic acids and tirucallic acids in B. serrata oleo-gum-resin extract were identified.

Diglycolamic acid modified silica gel for the separation of hazardous trivalent metal ions from aqueous solution.

The surface of the silica gel was modified with diglycolamic acid moieties and the product (Si-DGAH) was characterized by elemental analysis, TG-DTA, (1)H and (29)Si NMR and scanning electron microscopy (SEM). The adsorption behavior of hazardous americium (III) and europium (III) in Si-DGAH was studied from aqueous nitric acid medium to examine the feasibility using the modified silica for the separation of Am(III) and Eu(III) from aqueous wastes. In this context, the effect of various parameters such as the duration of equilibration, and concentrations of europium, nitric acid, sodium nitrate and diethylenetriaminepentaacetic acid (DTPA) in aqueous phase, on the distribution coefficient (K(d)) of Am(III) and Eu(III) was investigated. The distribution coefficient of ∼10(3) mL/g (>99.9% extraction) was obtained for both Am(III) and Eu(III) at pH 3, and the K(d) values decreased with increase in the concentration of nitric acid. Rapid kinetics of extraction in the initial stages of equilibration, followed by the establishment of equilibrium occurred within 30 min. The extraction data were fitted into Langmuir adsorption model and the apparent europium extraction capacity was determined. Europium loading capacity of the sorbent was determined at various feed pH by column method. The study indicated the possibility of using diglycolamic acid-modified silica for the separation of Eu(III) and Am(III) from aqueous wastes.

Conformational and coalescence behavior of trialkylphosphates in vacuum, water and dodecane.

The conformations of trialkylphosphates (alkyl = propyl, butyl, pentyl and hexyl) in various diluents were studied by molecular dynamics simulations. The population density of various conformers of trialkylphosphate in different diluents such as water and n-dodecane was determined. The Helmholtz energy change accompanied by the transition between various conformations was computed. The aggregation behavior of tributylphosphate in water and water-dodecane medium was studied.

Free acidity measurement - a review.

Free acidity is an important parameter especially in the presence of hydrolysable ions. Several methods have been developed for the determination of free acidity, attributing due importance to the accuracy and the precision of the measurement with the aim of the easiness of the methodology as well as post-measurement recovery in mind. This review covers important methods for the determination of free acidity with emphasis on actinide containing solutions, reported in the literature over the past several decades classifying them into different categories.

A Facile Synthesis, In vitro Antiinflammatory and Antioxidant activity of Novel Benzimidazolylpyrano[2,3-d][1,3]thiazolocarbonitriles.

The synthesis benzimidazolylpyrano [2,3-d] [1,3] thiazolocarbonitriles (5a-j) were achieved by cyclocondensation of arylidene amino-benzo[d]imidazole-2-thiols (3a-j) with mercaptoacetic acid followed by cyclization with 2-(phenylmethylene)malononitrile. Further more, the present study aimed at the evaluation of in vitro antiinflammatory activity and antioxidant activity of synthetic compounds. All tested compounds showed appreciable activity against the standard drugs.

Liquid-liquid extraction of Pu(IV), U(VI) and Am(III) using malonamide in room temperature ionic liquid as diluent.

The extraction behavior of U(VI), Pu(IV) and Am(III) from nitric acid medium by a solution of N,N-dimethyl-N,N-dioctyl-2-(2-hexyloxyethyl)malonamide (DMDOHEMA) in the room temperature ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (C(4)mimNTf(2)), was studied. The distribution ratio of these actinides in DMDOHEMA/C(4)mimNTf(2) was measured as a function of various parameters such as the concentration of nitric acid, DMDOHEMA, NTf(2)(-), alkyl chain length of ionic liquid. The extraction of actinides in the absence of DMDOHEMA was insignificant and the distribution ratio achieved in conjunction with C(4)mimNTf(2), was remarkable. The separation factor of U(VI) and Pu(IV) achieved with the use of DMDOHEMA, ionic liquid was compared with Am(III) and other fission products. The stoichiometry of the metal-solvate was determined to be 1:2 for U(VI) and Pu(IV) and 1:3 for Am(III).

A rare case of antepartum posterior reversible encephalopathy syndrome.

Pre-eclampsia and eclampsia are well-known causative factors of posterior reversible encephalopathy syndrome (PRES). There are only a few reported cases of antepartum PRES. We report a 25-year-old primigravid woman who presented with eight months of amenorrhoea and an abrupt onset of eclampsia associated with a history of a fall. A computed tomography scan ruled out intracranial haemorrhage and PRES was diagnosed. She responded well to supportive care, labour was induced and maternal and neonatal outcomes were good. Antepartum PRES poses different challenges to those of PRES in non-obstetric or postpartum patients, because of the additional management aspects required to ensure foetal wellbeing. We were posed with a difficult decision about the disadvantages of caesarean section versus those of vaginal delivery in our patient.

Design and adaptation of a novel supercritical extraction facility for operation in a glove box for recovery of radioactive elements.

The design and development of a novel supercritical extraction experimental facility adapted for safe operation in a glove box for the recovery of radioactive elements from waste is described. The apparatus incorporates a high pressure extraction vessel, reciprocating pumps for delivering supercritical fluid and reagent, a back pressure regulator, and a collection chamber. All these components of the system have been specially designed for glove box adaptation and made modular to facilitate their replacement. Confinement of these materials must be ensured in a glove box to protect the operator and prevent contamination to the work area. Since handling of radioactive materials under high pressure (30 MPa) and temperature (up to 333 K) is involved in this process, the apparatus needs elaborate safety features in the design of the equipment, as well as modification of a standard glove box to accommodate the system. As a special safety feature to contain accidental leakage of carbon dioxide from the extraction vessel, a safety vessel has been specially designed and placed inside the glove box. The extraction vessel was enclosed in the safety vessel. The safety vessel was also incorporated with pressure sensing and controlling device.

Human APC sequesters beta-catenin even in the absence of GSK-3beta in a Drosophila model.

There have been conflicting reports on the requirement of GSK-3beta-mediated phosphorylation of the tumor suppressor adenomatous polyposis coli (APC) vis-à-vis its ability to bind and degrade beta-catenin. Using a unique combination of loss of function for Shaggy/GSK-3beta and a gain of function for human APC in Drosophila, we show that misexpressed human APC (hAPC) can still sequester Armadillo/beta-catenin. In addition, human APC could suppress gain of Wnt/Wingless phenotypes associated with loss of Shaggy/GSK-3beta activity, suggesting that sequestered Armadillo/beta-catenin is non-functional. Based on these studies, we propose that binding per se of beta-catenin by APC does not require phosphorylation by GSK-3beta.

Retention studies on uranium, thorium and lanthanides with amide modified reverse phase support and its applications.

The retention behaviour of uranium and thorium was investigated on modified reverse phase supports using 3-oxo-pentanedioicacid bis-[bis-(2-ethyl-hexyl)-amide (OPAEHA), 3-oxo-pentanedioicacid bis diisobutyl amide (OPAIBA) and bis-2-ethylhexyl succinamic acid (BEHSA). alpha-Hydroxy isobutyric acid (alpha-HIBA) was employed as the complexing reagent for elution. Elution profiles of uranium and thorium were studied as a function of the modifier concentration, mobile phase composition and its pH. Based on these investigations, a novel high performance liquid chromatography (HPLC) based separation technique was developed using BEHSA modified support for the isolation and quantitative determination of lanthanides as a group in uranium matrix. Hundreds of samples obtained from pyrochemical reprocessing of molten salts containing lanthanides in uranium matrix (e.g. 1:20,000) were separated and determined within 7 min using the coated support. The advantage of the present HPLC technique lies in the simultaneous separation and assay of total lanthanides and uranium whereas other analytical methods necessitate the separation of uranium matrix prior to lanthanide assay.

High performance liquid chromatographic studies on lanthanides, uranium and thorium on amide modified reversed phase supports.

The retention behavior of uranium, thorium and lanthanides has been investigated with amide modified reversed phase C(18) supports using alpha-hydroxy isobutyric acid (alpha-HIBA) as the mobile phase. Four structurally different amide moieties namely, 4-hydroxy-N,N-dihexyl butyramide (4HHBA), 4-hydroxy-N,N-di-2-ethylhexylhexanamide (4HEHHA), bis(N,N,N',N'-2-ethylhexyl)malonamide (B2EHM) and N-methyl-tris(dihexylcarbamoyl-3-methoxy)pivolamide (MTDCMPA) have been synthesized and studied. Among the various amide coated columns, the supports modified with 4HHBA, B2EHM and MTDCMPA exhibit an interesting retention for uranium and thorium, which is different from 4HEHHA modified support. The retention time for uranium and thorium increases with increasing amide concentration for 4HHBA, B2EHM and MTDCMPA supports, while the same decreases with increasing 4HEHHA content. However, the separation factor for uranium and thorium is greater on a 4HEHHA support, compared to an unmodified C(18) column, reflecting the amide's preferential complexation of uranium over thorium. Columns modified with 4HHBA, B2EHM and MTDCMPA exhibit relatively higher retentions for lanthanides. However, MTDCMPA modified support shows a different elution profile for lanthanides compared to 4HHBA, and B2EHM modified columns. Individual separations of heavier lanthanides, i.e., from gadolinium to lutetium also have been achieved using 4HHBA and B2EHM modified supports. The influence of modifier content, mobile phase concentration and its pH on the retention of metal ions has also been studied. Based on these investigations, an efficient high performance liquid chromatographic method (HPLC) has been developed for the rapid separation of uranium from thorium as well as for the individual separation of heavier lanthanides.

Development of a reliable and valid psychosocial measure of self-perception of health in type 2 diabetes.

OBJECTIVES: The aim was to develop a reliable and valid psychosocial measure of self-perception of health in type 2 diabetes. METHODS: Item analysis and factor analyses were done in order to stabilize and establish principal components of the questionnaire. Reliability (internal consistency aspect) was established using Chronbach's alpha method. Concurrent and discriminant validities were established using conventional methods. RESULTS: Factor analysis yielded 12 significant factors (eigen value > or =1), but first six components were retained based on Scree test. These six principal varimax factors explain 49.7% of variance of psychosocial measure of self-perception of health. CONCLUSIONS: The final version after all these psychometric procedures had 27 items with six principal components. They were appropriately named as follow: (I) Positive self-feeling; (II) Sociality; (III) Attention seeking; (IV) Feel healthy; (V) Worry about health; (VI) Dependence. Total variance explained is 49.7%.

A new procedure for the spectrophotometric determination of uranium(VI) in the presence of a large excess of thorium(IV).

Spectrophotometric determination of microgram amounts of U(VI) with 2-(5-Bromo-2-Pyridylazo)-5-diethylaminophenol (Br-PADAP), originally developed by Johnson and Florence has been modified to enable the determination of U(VI) in the presence of a large excess of Th(IV). The effects of thorium, tri-n-butyl phosphate (TBP) and ethanol on the estimation of uranium have been studied in detail and are presented in this paper. This modified method can be applied for the analysis of U(VI) both in aqueous and organic samples containing a large excess of Th(IV) (Th:U = 10000:1).

QSPR modeling for solubility of fullerene (C(60)) in organic solvents.

Solubility of fullerene C(60) in 75 organic solvents was examined to develop quantitative structure-solubility relationships. Topological indices and polarizability parameter computed from refractive index were used to form the regression models. The models suggested for individual data sets such as alkanes, alkyl halides, alcohols, cycloalkanes, alkylbenzenes, and aryl halides have good predictive ability and are better than the models for the combined groups. Inclusion of an indicator parameter which is a combination of atom contributions and contributions of substituents' position in benzenes improved the predictive ability significantly.

Foot care economics--cost burden to diabetic patients with foot complications: a study from southern India.

OBJECTIVE: To estimate the direct cost burden of diabetic patients with foot complications. METHODS: An illustrative sample of 270 subjects with type two diabetes were seen at the clinic selected for the study. Among them 164 were without any complication (Group I) and 106 patients were with foot complications (Group II). In the latter group 83 (Group IIA) required in-patient (IP) care and 23 (Group IIB) required out-patient (OP) care. Annual expenses on medical care were estimated by a questionnaire method. Validation of the questionnaire data was verifying the amount spent by checking up the bills. RESULT: Group I spent Rs.4373 (US $ 104 Approx.), Group II spent Rs.15450 (US $ 343 Approx.), Group IIA spent Rs.7200 (US $ 171 Approx.) and Group IIB spent Rs.16910 (US $ 403 Approx.) in the study year. In the total sample of 270 subjects 61% were without foot problems, 22% had foot problems requiring OP treatment only (Group IIA), and 78% had foot problems requiring IP treatment (Group IIB). CONCLUSION: Group IIB spent significantly greater percentage of their income than Group IIA, and both groups spent greater percentage of their income than Group I. All differences were statistically significant.

Quality of drinking water from ponds in villages of Kolleru Lake region.

Kolleru Lake is the largest natural freshwater lake in the districts of East and West Godavari of Andhra Pradesh. The major population centres in the Kolleru Lake region are the 148 villages of which 50 bed villages and 98 belt villages. All bed and belt villages in lake region have at least one drinking water pond. Drinking water ponds are filled with lake water during monsoon season and directly supplied to the public throughout the year. The water samples were collected from village drinking water ponds in a year by covering three seasons and analysed for different physico-chemical parameters to assess the quality of drinking water.

Heavy metals concentrations in the sediments from Kolleru Lake, India.

Kolleru Lake is the largest natural freshwater lake of Andhra Pradesh in India. It is situated between the latitudes 16 degrees 32(1) and 16 degrees 47(1)N and longitude 81 degrees 05(1) and 81 degrees 21(1) E. The catchment area of the lake is 4763 sq. km. The sediment samples were collected at different points from Kolleru Lake in three seasons a year over a period of three years and analyzed for heavy metals and organic matter. Concentrations of Cu, Pd, Cd, Mn, Ni, Co, Fe and Zn in the sediments were analysed by using Atomic absorption spectrometer (AAS) and selected sediments samples were analysed for Be, Sr, Ba, B, Mo, Tl, V, Cr, Ag, Bi, As and Se by using inductively coupled plasma Mass Spectrometer (ICP-MS).

Drug release kinetics from polymeric films containing propranolol hydrochloride for transdermal use.

Polymeric films containing propranolol hydrochloride (PPN) were formulated and evaluated with a view to select a suitable formulation for the development of transdermal drug delivery systems. Films containing different ratios of ethyl cellulose (EC), poly(vinylpyrrolidone) (PVP), and PPN were prepared by mercury substrate method. In vitro drug release and skin permeation studies were conducted using paddle over disk and modified Franz diffusion cell, respectively. The drug release profiles from the polymeric film indicated that the drug content in the film decreased at an apparent first-order rate, whereas the quantity of drug release was proportional to the square root of time. The release rate of PPN increased linearly with increasing drug concentration and PVP fraction in the film, but was found to be independent of film thickness. The increase in release rate may be due to leaching of hydrophilic fraction of the film former, which resulted in the formation of pores. It was also observed that the release of drug from the films followed the diffusion-controlled model at low drug concentration. A burst effect was observed initially, however, at high drug loading level, which may be due to rapid dissolution of the surface drug followed by the diffusion of the drug through the polymer network in the film. The in vitro skin permeation profiles displayed increased flux values with increase of initial drug concentration in the film, and also with the PVP content. From this study, it is concluded that the films composed of EC/PVP/PPN, 9:1:3, 8:2:2, and 8:2:3, should be selected for the development of transdermal drug delivery systems using a suitable adhesive layer and backing membrane for potential therapeutic applications.