Association between background parenchymal enhancement and tumor response in patients with breast cancer receiving neoadjuvant chemotherapy.

PURPOSE: To analyze the relationships between background parenchymal enhancement (BPE) of the contralateral healthy breast and tumor response after neoadjuvant chemotherapy (NAC) in women with breast cancer. MATERIALS AND METHODS: A total of 228 women (mean age, 47.6 years±10 [SD]; range: 24-74 years) with invasive breast cancer who underwent NAC were included. All patients underwent breast magnetic resonance imaging (MRI) before and after NAC and 127 patients underwent MRI before, during (after the 4th cycle of NAC) and after NAC. Quantitative semi-automated analysis of BPE of the contralateral healthy breast was performed. Enhancement level on baseline MRI (baseline BPE) and MRI after chemotherapy (final BPE), change in enhancement rate between baseline MRI and final MRI (total BPE change) and between baseline MRI and midline MRI (early BPE change) were recorded. Associations between BPE and tumor response, menopausal status, tumor phenotype, NAC type and tumor stage at diagnosis were searched for. Pathologic complete response (pCR) was defined as the absence of residual invasive cancer cells in the breast and ipsilateral lymph nodes. RESULTS: No differences were found in baseline BPE, final BPE, early and total BPE changes between pCR and non-pCR groups. Early BPE change was higher in non-pCR group in patients with stages 3 and 4 breast cancers (P=0.019) and in human epidermal growth factor receptor 2 (HER2)-negative patients (P=0.020). CONCLUSION: Early reduction of BPE in the contralateral breast during NAC may be an early predictor of loss of tumor response, showing potential as an imaging biomarker of treatment response, especially in women with stages 3 or 4 breast cancers and in HER2 - negative breast cancers.

Lab-on-a-brane for spheroid formation.

Lab-On-a-Brane (LOB) represents a class of Lab-On-a-Chip (LOC) integrating flexible, highly gas permeable and biocompatible thin membranes (TMs). Here we demonstrate the potentiality of LOBs as cell biochips promoting 3D cell growth. The human cancer cells MCF-7 were cultured into standard multiwells (MWs) and into polydimethylsiloxane (PDMS) MWs, LOCs, and LOBs of different wettability. Surface treatments based on oxygen plasma and coating deposition have been performed to produce hydrophilic, hydrophobic, and oleophobic chips. By a comparison between all these chips, we observed that 3D cell aggregation is favored in LOBs, independent of substrate wettability. This may be attributed to the TM flexibility and the high oxygen/carbon dioxide permeability. Ultimately, LOBs seem to combine the advantages of LOCs as multi-well microfluidic chips to reduce operation time for cell seeding and medium refresh, with the mechanical/morphological properties of PDMS TMs. This is convenient in the perspective of applying mechanical stimuli and monitoring cell stiffness, or studying the metabolism of molecules permeable to PDMS membrane in response to external stimuli with interesting outcomes in cellular biology.

Background parenchymal enhancement in breast magnetic resonance imaging: A review of current evidences and future trends.

Background parenchymal enhancement (BPE) on breast magnetic resonance imaging (MRI) is a dynamic process, which varies among women and within the same woman over time due to different factors. BPE has profound implications for women with or at risk of breast cancer. Breast radiologist should be aware of factors that could potentially influence BPE and have to be familiar with its typical appearance. Marked BPE could indeed affect the diagnostic accuracy of breast MRI, but this shortcoming can be minimized through evaluation by dedicated radiologists, in order to correctly interpret and properly manage the additional findings. BPE shows promise as an imaging biomarker but many issues need to be addressed before it can be used either to determine screening strategy or the value of risk-reducing interventions. This review analyzes the clinical influence of BPE on breast MRI interpretation, breast cancer staging and surgical outcome and discusses current available evidences about BPE as an imaging biomarker.

Abdominal Hernias, Giant Colon Diverticulum, GIST, Intestinal Pneumatosis, Colon Ischemia, Cold Intussusception, Gallstone Ileus, and Foreign Bodies: Our Experience and Literature Review of Incidental Gastrointestinal MDCT Findings.

Incidental gastrointestinal findings are commonly detected on MDCT exams performed for various medical indications. This review describes the radiological MDCT spectrum of appearances already present in the past literature and in today's experience of several gastrointestinal acute conditions such as abdominal hernia, giant colon diverticulum, GIST, intestinal pneumatosis, colon ischemia, cold intussusception, gallstone ileus, and foreign bodies which can require medical and surgical intervention or clinical follow-up. The clinical presentation of this illness is frequently nonspecific: abdominal pain, distension, nausea, fever, rectal bleeding, vomiting, constipation, or a palpable mass, depending on the disease. A proper differential diagnosis is essential in the assessment of treatment and in this case MDCT exam plays a central rule. We wish that this article will familiarize the radiologist in the diagnosis of this kind of incidental MDCT findings for better orientation of the therapy.

Fe3O4/γ-Fe2O3 nanoparticle multilayers deposited by the Langmuir-Blodgett technique for gas sensors application.

Fe3O4/γ-Fe2O3 nanoparticles (NPs) based thin films were used as active layers in solid state resistive chemical sensors. NPs were synthesized by high temperature solution phase reaction. Sensing NP monolayers (ML) were deposited by Langmuir-Blodgett (LB) techniques onto chemoresistive transduction platforms. The sensing ML were UV treated to remove NP insulating capping. Sensors surface was characterized by scanning electron microscopy (SEM). Systematic gas sensing tests in controlled atmosphere were carried out toward NO2, CO, and acetone at different concentrations and working temperatures of the sensing layers. The best sensing performance results were obtained for sensors with higher NPs coverage (10 ML), mainly for NO2 gas showing interesting selectivity toward nitrogen oxides. Electrical properties and conduction mechanisms are discussed.

2-Butoxyethanol from cleaning products responsible for complaints in workplaces: a case study.

Indoor air quality is important because people are spending an increasing amount of time in the workplace. They are exposed to outdoor pollutants as well as pollutants emitted from products used indoors. Some chemicals, belonging to the category of volatile organic compounds (VOCs), easily release vapors at room temperature by evaporation. These accumulated vapors are often toxic and irritating. They may be alcohols, glycols, ketones, esters, etc., frequently present in the composition of many products for personal care or household purposes. This study suggests that the exposure levels of 2-butoxyethanol play an important role in the level of complaints of people at work. This study has emphasized the necessity of using different active and passive sampling methods for indoor air to avoid evaluation errors.

Sensitive coating for water vapors detection based on thermally sputtered calcein thin films.

In this paper the adsorption properties of thermally sputtered calcein thin films towards water and other polar molecules vapors are studied by different characterization techniques: quartz crystal microbalance, surface plasmon resonance and visible spectroscopy. Sensitivity of calcein thin films to water vapors resulted much higher as compared with those of a number of dyes whose structure was close to that of calcein. All types of sensors with calcein coatings have demonstrated linear concentration dependences in the wide range of water vapor pressure from low concentrations up to 27,000 ppm (close to saturation). At higher concentrations of water vapor all sensors demonstrate the abrupt increase of the response (up to two orders). A theoretical model is advanced explaining the adsorption properties of calcein thin films taking into account their chemical structure and peculiarities of molecular packing. The possibility of application of thermally sputtered calcein films in sensing technique is discussed.

Oxygen optical gas sensing by reversible fluorescence quenching in photo-oxidized poly(9,9-dioctylfluorene) thin films.

We investigated the fluorescence (FL) dependence on the environment oxygen content of poly(9,9-dioctylfluorene) (PF8) thin films. We show that the PF8 interactions with oxygen are not limited to the known irreversible photo-oxidation, resulting in the formation of Keto defects, but also reversible FL quenching is observed. This effect, which is stronger for the Keto defects than for the PF8, has been exploited for the realization of a prototype oxygen sensor based on FL quenching. The sensing sensitivity of Keto defects is comparable with the state of the art organic oxygen sensors based on phosphorescence quenching.

Heterogeneous optochemical VOC sensing layers selected by ESI-mass spectrometry.

Spin-coated films of 29H,31H-tetra-4-(2,4-di-tert-amylphenoxy)phthalocyanine (H(2)Pc) and [kappaP,mu-kappaS-(dppeS)Pt(CH(3))](2)[BF(4)](2) have been used as sensing layers deposited in thin film form for the detection of VOCs. The sensing behaviour of the blend was predicted on the basis of mass spectrometric determinations performed on H(2)Pc/Pt-complex solutions, by monitoring the formation of gas-phase ions at the electrospray interface. The addition of small amounts of acetonitrile produced a [M+41](+) peak whereas the addition of similar amounts of methanol, ethanol and isopropyl alcohol did not give the corresponding [M+ROH](+) species. These results were confirmed by sensing tests. A pure phthalocyanine optosensing element did not show relevant selectivity. Conversely, the heterogeneous sensing layer obtained by spin-coating deposition of a Pt-complex/H(2)Pc blend allowed the sensing of acetonitrile vapours with respect to the above mentioned alcohols.

Surface plamon resonance imaging of DNA based biosensors for potential applications in food analysis.

The adsorption processes of oligonucleotides immobilised onto suitable photolithographic patterned gold substrates have been investigated in aqueous buffer solution by using a home made surface plasmon resonance (SPR) imaging equipment. A rapid self-assembled method for the construction of DNA chips to be used in SPR imaging experiments have been followed. The immobilised DNA molecules (probes) adopted in our SPR experiments anchored to a gold surface via thiol group were 5'thiol-modified containing a (CH(2))(15) tail. The hybridisation processes taking place with its complementary sequence have been observed and characterized by monitoring phenomena by a SPR imaging system. The two analysed oligonucleotides (probes and target) are of interest in plant gene biotechnological application and differing for the presence at the 5'-end of a poly T16 spacer. Dynamic investigation of smallest changes in SPR imaging pictures performed in liquid phase in the presence of DNA complementary probes have been performed. Quantitative information in terms of threshold of sensitivity has been extracted by using a specific images treatment.

A brush fire forensic case.

In Italy, every summer forest fires attract public attention due to the number of victims, the intensity of the fires, the areas devastated, the environmental damage and the loss of property. Excluding some fires by natural causes, other causes are related to the social, economic, and productive profile of the territory. The erroneous expectation is that wooded areas destroyed by fire can then be used for private interests. Often, a fire, started to clear a small area, can completely change the expected result, producing disaster, loss of property, destruction of entire forests and resident fauna, and kill innocent people. In this case report, the reconstruction of an arson scene, the analytical techniques and the results obtained are illustrated in this paper, with the aim of sharing with other research laboratories the current knowledge on forest fire.

Au nanoparticles prepared by physical method on Si and sapphire substrates for biosensor applications.

Gold nanoparticles heavily functionalized with oligonucleotides have been used in a variety of DNA detection methods. The optical properties of three-dimensional aggregates of Au nanoparticles in solution or deposited onto suitable surfaces have been analyzed to detect hybridization processes of specific DNA sequences as possible alternatives to fluorescent labeling methods. This paper reports on the preparation of gold nanoparticles directly deposited onto the surface of silicon (Si) and sapphire (Al2O3) substrates by a physical methodology, consisting in the thermal evaporation of a thin Au film and its successive annealing. The method guarantees the preparation of monodispersed single-crystal Au nanoparticles with a strong surface plasmon resonance (SPR) peak centered at about 540 nm. We show that the changes of SPR excitation before and after DNA functionalization and subsequent hybridization of Au nanoparticles immobilized onto Si and Al2O3 substrates can be exploited to fabricate specific biosensors devices in solid phase.

Liquid phase SPR imaging experiments for biosensors applications.

Surface plasmon resonance (SPR) has recently gained attention as a label-free method for the detection of biological molecules binding onto functionalised surfaces. It is one of the most sensitive detection method for monitor variations in the thickness and refractive index in ultra-thin films. Here, the adsorption processes of oligonucleotides onto gold substrates have been investigated in aqueous buffer solution using SPR imaging measurements. The hybridization of a thiol-modified, single stranded oligonucleotide anchored to a gold surface via thiol group, with its complementary sequence has been observed and characterised monitoring the hybridization process by SPR equipment. In situ investigation of smallest changes in SPR imaging measurements dynamically performed in liquid phase in the presence of DNA complementary probes was performed. Infrared spectroscopy and scanning electron microscopy characterisation of the functionalised gold surfaces of the biosensor were compared with the images obtained by SPR experimental apparatus.

Sorption of amines by the Langmuir-Blodgett films of soluble cobalt phthalocyanines: evidence for the supramolecular mechanisms.

By means of microgravimetry, UV-Vis spectroscopy and optic microscopy, sorption of pyridine, primary aliphatic amines and benzylamine by the Langmuir-Blodgett (LB) films of tetra-4-tert-butyl- and tetra-(3-nitro-5-tert-butyl)-substituted cobalt phthalocyanines (CoPc' and CoPc*, respectively) was studied over a broad concentration range. In general, sorption occurs as stepwise intercalation of the sorbate molecules into the supramolecular 3D structure of the phthalocyanine assembly followed by formation of the donor-acceptor complexes. Both intercalation depth and stoichiometry of the complexes are determined by the molecular structure of amines. The supramolecular factor allows discrimination between amines in air but not in aqueous solutions because of concurrent intercalation of water.

A multitask scientific investigation resolved an unusual road crash case.

Crime or accident scenes are sometimes almost unbelievable. Elements of the scene can be so strange that a reconstruction of the event is almost impossible. What can the investigator do in such a case? The only solution is to collect all the evidence and samples, even if they appear useless, and send them to specialised laboratories. Scientific data are held in high esteem by the law and court proceedings consequent on crashes will almost certainly require analytical results of one sort or another to be presented as evidence. The case presented is one of those strange and almost unbelievable cases with little physical evidence, no eyewitnesses and the almost fortuitous collection of one unique, incredibly small, sample. The prosecutor's decision to instruct unusual but appropriate experts turned out to be successful.

Chemical evidence and risks associated with soybean and rapeseed meal fermentation.

The storage and transport of cereals and foodstuffs present recurrent problems. They may be attacked by insects or, under certain conditions, they may undergo spontaneous fermentation. Insect attack is normally avoided by fumigants, while fermentation, which depends on parameters such as temperature and humidity, is more difficult to stop and can produce chemical compounds which irremediably modify the nutritional and compositional properties of foodstuff. This paper describes the main chemical compounds produced by fermentation and self-ignition of soybean and rapeseed meal. Reported cases occurred in a storage site and during transport by ship, respectively.

An unusual and persistent contamination of drinking water by cutting oil.

Drinking water contamination by materials, such as cutting oil, used to set up pipelines is an uncommon but possible event. This paper describes the analytical procedures used to identify the components of that contaminant in drinking water. Volatile and semi-volatile chemical species, responsible for an unpleasant taste and odour, were recognised by solid phase microextraction and GC/MS techniques. Among the volatile compounds, the presence of xylenes, bornyl acetate and diphenyl ether was confirmed by certificate standards and quantified in the most contaminated samples.

Biological activity of soil organic matter mobilized by root exudates.

In order to study the biological activity of soil organic matter mobilized by agrarian (Zea mays: cultivars Mytos and Samantha) and forest (Picea abies Karst. and Pinus sylvestris L.) root exudates, two different soils, an Eutric Cambisol (EC) and a Rendzic Leptosol (RL), were considered. Soil organic matter extracts were obtained by treating the soils with water (control) or plant root exudates. The extracts were characterized by hormone-like activities and gas chromatographic/mass spectrometric (GC/MS) measurements. Their effects on the nitrogen metabolism in maize seedlings were evaluated. The nitrogen organification in the maize seedlings has been greatly stimulated by all the organic acid extracts from the agrarian soil, while the extracts from the forest soil had no influence upon the metabolism; this indicated a probable link between the plant and the environment. The different biological activities of the extracts are discussed.

Soil organic matter mobilization by root exudates.

In order to study the different soil organic matter mobilisation by agrarian (Zea mais: cultivars Paolo and Sandek) and forest (Picea abies Karst. and Pinus sylvestris L.) root exudates, three different soils (Dystric Spodic Cambisol--S1, Haplic Luvisol--S2 and Calcaric Cambisol--S3) have been considered. Treating the soils with water (control) or plant root exudates, soil organic matter extracts were obtained. The extracts were characterised by hormone-like activities and gas chromatographic/mass spectrometric (GC/MS) measurements. Water extract and plant root exudates exhibited no hormone-like activity, while the other soil-extracts were endowed with a different hormone-like behaviour. GC/MS data indicated that in the acid soils (S1) Sandek and Picea abies exudates showed a greater ability in extracting organic acid isomers (Cl4COOH, Cl5COOH and Cl7COOH), while in neutral soils (S3) all the exudates were active in separating organic acids. In intermediate conditions (S2), Picea abies and Pinus sylvestris exudates liberated C15COOH isomers, Paolo C11COOH isomers, while Sandek was not effective. The different role of plant root exudates in mobilising bio-molecules from the bulk of the soil is proposed.

Cryptic chemical identification as a crime intelligence aid.

A dead body was found near the sea and a commercial port in north-east Italy. The man had been shot and then burnt, by using a large volume of fire accelerant. The chemical composition of the flammable mixture had to be determined in order to aid police investigations. GC-MS analysis of residual cloth and soil identified a common gasoline, together with some unrelated compounds deriving from the container used to carry the inflammable liquid. A reconstruction of the event, an examination of the surroundings where the crime took place and the cryptic chemicals found, enabled the investigators to restrict and intensify their enquiries within a specific area.