ABSTRACT
The level of bacterial adhesion and bacterial microleakage in four different materials utilised to seal the access passage of screw retained implant supported prosthesis (SRIP) is of interest to dentists. Four distinct categories were created from the samples on the basis of restorative materials used for sealing access passage in SRIP. Guttapercha and light cured acrylic resin were found to have comparatively low bacterial adhesion and bacterial microleakage in sealing accessory canals in screw retained implant supported prosthesis.
ABSTRACT
Purpose: The purpose of the study was to evaluate and compare the effect of beverages, denture cleanser and chlorhexidine gluconate solution on surface roughness of flexible denture base material. Materials and methods: Fifty flexible denture base resin specimens measuring 50±1mm in diameter and 0.5±0.05 mm in thickness were fabricated. The specimens were divided into five groups each containing ten specimens. The specimens were immersed in distilled water (Control group A); hot coffee (Group B); cold beverage (Group C); sodium perborate containing denture cleanser (Group D) and 2% chlorhexidine gluconate solution (Group E). The specimens were immersed for 10 min daily in mentioned solutions for up to 60 days. Surface roughness (Ra) was evaluated on the 1st, 20th and 60th day with the help of atomic force microscope. The statistical analysis was done using two-way ANOVA and Tukey's Post hoc test. Results: The two- way ANOVA revealed that the average Ra values varied significantly depending on the type of solution used for immersion (p<0.001) and the duration of immersion (p<0.001). Variation in surface roughness with cold beverage was highest (p=0.001). On the 60th day the surface roughness of flexible denture base resin material was higher with cold beverage (0.184 µm) and denture cleanser (0.203 µm) than that of distilled water (0.052 µm) hot coffee (0.030 µm) and 2% chlorhexidine gluconate (0.068 µm). Conclusion: Exposure to cold beverage, which was acidic in nature and peroxide containing denture cleanser, produces much rougher surface in the thermoplastic polyamide flexible denture base resin specimens.
ABSTRACT
AIM: We evaluated the effect of incorporating Fluconazole, Chlorhexidine Gluconate, and Silver-Zinc Zeolite as bioactive materials (10% of mass) on the flexural strength of commercially available heat-cured polymethyl methacrylate (PMMA; Travelon). MATERIALS AND METHODS: The following four groups were compared; Group 1: Control group with pure PMMA, Group 2: Antibacterial drug group with chlorhexidine gluconate in powder form + PMMA, Group 3: Antifungal drug group with fluconazole in powder form + PMMA, Group 4: Antimicrobial agent group with silver zinc zeolite in powder form + PMMA. After processing, the specimens were subjected for flexural strength testing using three-point bending test in a universal testing machine. RESULTS: A significant (P < 0.0001) decrease in flexural strength following incorporation of Fluconazole, Chlorhexidine Gluconate, and Silver-Zinc Zeolite to heat polymerized acrylic resin was observed when compared with the control group. The decrease in mean flexural strength was minimal in the fluconazole group. CONCLUSION: Although the addition of a bioactive material to PMMA acrylic is desirable, it is not practical as it reduces flexural strength of the acrylic base.