Metabolomic Fingerprint Assay in Zebrafish Embryos.

In order for new drugs to enter the market, extensive studies are needed to examine toxic effects. Among others, teratogenicity studies are of paramount importance. Of even higher importance is to gain knowledge on the biological responses that take place upon drug exposure, so as to have a better understanding of the molecular mechanisms that govern developmental changes. Metabolomics is the research field that studies the changes in the chemical composition of metabolites contained within cells. Conducting metabolomics studies results in valuable information. Zebrafish is a vertebrate model organism that bridges in vivo assays and in vivo studies. In this chapter, we propose a metabolomic fingerprint assay for the study of metabolic changes in zebrafish embryos upon exposure to various drugs. The metabolome of zebrafish is extracted, and the 1H-NMR spectrum is recorded. Using open-access metabolomic databases, a list of tentative metabolites is retrieved. The presence of the tentative metabolites is further confirmed by UHPLC-HRMS. Ultimately, after a metabolic pathway analysis, the metabolic network is revealed and useful conclusions can be drawn.

Two-Birds-with-One-Stone Synthesis of Hydrophilic and Hydrophobic Fluorescent Carbon Nanodots from Dunaliella salina Biomass as 4-Nitrophenol Nanoprobes Based on Inner Filter Effect and First Derivative Redshift of Emission Band.

4-Nitrophenol (4-NP) has been listed as a priority pollutant and has also been reported as a human urinary metabolite used as a marker to evaluate exposure to certain pesticides. In the work herein, a solvothermal approach is applied to the one-pot synthesis of both hydrophilic and hydrophobic fluorescent carbon nanodots (CNDs), utilizing the halophilic microalgae Dunaliella salina as a biomass precursor. Both kinds of the produced CNDs showed appreciable optical properties and quantum yields, good photostability and they were capable of probing 4-NP by quenching their fluorescence through the inner filter effect. Interestingly, a prominent 4-NP concentration-dependent redshift of the corresponding emission band of the hydrophilic CNDs was noticed, which was further exploited, for the first time, as an analytical platform. Capitalizing on these properties, analytical methods were developed and applied to a variety of matrixes, such as tap water, treated municipal wastewater and human urine. The method based on the hydrophilic CNDs (λex/λem: 330/420 nm) was linear in the range of 0.80-45.0 µM and showed acceptable recoveries (from 102.2 to 113.7%) with relative standard deviations of 2.1% (intra-day) and 2.8% (inter-day) for the quenching-based detection mode and 2.9% (intra-day) and 3.5% (inter-day) for the redshift one. The method based on the hydrophobic CNDs (λex/λem: 380/465 nm) was linear in the range of 1.4-23.0 µM, with recoveries laying within the range of 98.2-104.5% and relative standard deviations of 3.3% and 4.0% for intra-day and inter-day assays, respectively.

Benzophenones in the Environment: Occurrence, Fate and Sample Preparation in the Analysis.

The ubiquitous presence of emerging contaminants in the environment is an issue of great concern. Notably, for some of them, no established regulation exists. Benzophenones are listed as emerging contaminants, which have been identified in the environment as well as in human fluids, such as urine, placenta, and breast milk. Their accumulation and stability in the environment, combined with the revealed adverse effects on ecosystems including endocrine, reproductive, and other disorders, have triggered significant interest for research. Benzophenones should be extracted from environmental samples and determined for environmental-monitoring purposes to assess their presence and possible dangers. Numerous sample preparation methods for benzophenones in environmental matrices and industrial effluents have been proposed and their detection in more complex matrices, such as fish and sludges, has also been reported. These methods range from classical to more state-of-the-art methods, such as solid-phase extraction, dispersive SPE, LLE, SBSE, etc., and the analysis is mostly completed with liquid chromatography, using several detection modes. This review critically outlines sample preparation methods that have been proposed to date, for the extraction of benzophenones from simple and complex environmental matrices and for cleaning up sample extracts to eliminate potential interfering components that coexist therein. Moreover, it provides a brief overview of their occurrence, fate, and toxicity.

Untargeted metabolomics of human keratinocytes reveals the impact of exposure to 2,6-dichloro-1,4-benzoquinone and 2,6-dichloro-3-hydroxy-1,4-benzoquinone as emerging disinfection by-products.

INTRODUCTION: The 2,6-dichloro-1,4-benzoquinone (DCBQ) and its derivative 2,6-dichloro-3-hydroxy-1,4-benzoquinone (DCBQ-OH) are disinfection by-products (DBPs) and emerging pollutants in the environment. They are considered to be of particular importance as they have a high potential of toxicity and they are likely to be carcinogenic. OBJECTIVES: In this study, human epidermal keratinocyte cells (HaCaT) were exposed to the DCBQ and its derivative DCBQ-OH, at concentrations equivalent to their IC20 and IC50, and a study of the metabolic phenotype of cells was performed. METHODS: The perturbations induced in cellular metabolites and their relative content were screened and evaluated through a metabolomic study, using 1H-NMR and MS spectroscopy. RESULTS: Changes in the metabolic pathways of HaCaT at concentrations corresponding to IC20 and IC50 of DCBQ-OH involved the activation of cell membrane α-linolenic acid, biotin, and glutathione and deactivation of glycolysis/gluconeogenesis at IC50. The changes in metabolic pathways at IC20 and IC50 of DCBQ were associated with the activation of inositol phosphate, pertaining to the transfer of messages from the receptors of the membrane to the interior as well as with riboflavin. Deactivation of biotin metabolism was recorded, among others. The cells exposed to DCBQ exhibited a concentration-dependent decrease in saccharide concentrations. The concentration of steroids increased when cells were exposed to IC20 and decreased at IC50. Although both chemical factors stressed the cells, DCBQ led to the activation of transporting messages through phosphorylated derivatives of inositol. CONCLUSION: Our findings provided insights into the impact of the two DBPs on human keratinocytes. Both chemical factors induced energy production perturbations, oxidative stress, and membrane damage.

The Unexplored Wound Healing Activity of Urtica dioica L. Extract: An In Vitro and In Vivo Study.

Wound healing is a great challenge in many health conditions, especially in non-healing conditions. The search for new wound healing agents continues unabated, as the use of growth factors is accompanied by several limitations. Medicinal plants have been used for a long time in would healing, despite the lack of scientific evidence veryfying their efficacy. Up to now, the number of reports about medicinal plants with wound healing properties is limited. Urtica dioica L. is a well-known plant, widely used in many applications. Reports regarding its wound healing potential are scant and sparse. In this study, the effect of an Urtica dioica L. extract (containing fewer antioxidant compounds compared to methanolic or hydroalcoholic extracts) on cell proliferation, the cell cycle, and migration were examined. Additionally, antioxidant and anti-inflammatory properties were examined. Finally, in vivo experiments were carried out on full-thickness wounds on Wistar rats. It was found that the extract increases the proliferation rate of HEK-293 and HaCaT cells up to 39% and 30% after 24 h, respectively, compared to control cells. The extract was found to increase the population of cells in the G2/M phase by almost 10%. Additionally, the extract caused a two-fold increase in the cell migration rate of both cell lines compared to control cells. Moreover, the extract was found to have anti-inflammatory properties and moderate antioxidant properties that augment its overall wound healing potential. Results from the in vivo experiments showed that wounds treated with an ointment of the extract healed in 9 days, while wounds not treated with the extract healed in 13 days. Histopathological examination of the wound tissue revealed, among other findings, that inflammation was significantly reduced compared to the control. Urtica dioica L. extract application results in faster wound healing, making the extract ideal for wound healing applications and a novel drug candidate for wound healing.

Metabolomic Profiling Unveils the Impact of Non-Doped and Heteroatom-Doped Carbon Nanodots on Zebrafish (Danio rerio) Embryos.

Recently, concern has been raised over the transport, transformation, and fate of carbon nanodots (CNDs) after their release into the environment. Their toxicity towards organisms and humans has recently been addressed as an important issue. In this study, a metabolomic approach was employed to obtain an insight into the effect of CNDs (either pristine or doped with nitrogen and nitrogen/sulfur) on zebrafish. Embryos were exposed to concentrations corresponding to lethal concentration (LC) LC50 (550, 400, and 150 µg mL-1), LC50/2 (275, 200, and 75 µg mL-1), and LC50/4 (138, 100, and 38 µg mL-1) of the three CNDs (non-doped, N-doped, and N,S-codoped, respectively) to scrutinize the interactions of the CNDs with the larvae. Numerous differences in the metabolic pathways were recorded in all cases. Seven metabolic pathways were detected in the control larvae. When the larvae were exposed to concentrations equal to LC50, LC50/2, and LC50/4 of non-doped CNDs, 12, 12, and 3 metabolic pathways were detected, respectively. In the case of N-doped CNDs, 4, 7, and 4 pathways were detected, while in the case of N,S-codoped CNDs, 8, 5, and 5 pathways were detected when exposed to concentrations of LC50, LC50/2, and LC50/4, respectively. In all cases, certain metabolic pathways were altered while others were either down-regulated or up-regulated. Some of these changes include the activation of alanine, aspartate, and glutamate metabolism, aminoacyl-tRNA biosynthesis, butanoate metabolism, D-glutamine, and D-glutamate metabolism, glutathione metabolism, selenoamino acid metabolism, valine, leucine, and isoleucine degradation pathways. Moreover, the deactivation of starch and sucrose metabolism, the glycine, serine, and threonine metabolism, among others, were recorded. Our findings underline the importance to further study the impact of CNDs on marine organisms. As zebrafish has been shown to share many similarities with humans in bioprocesses and genome, it can be assumed that CNDs may also pose a threat to human health.

Sponges and Sponge-Like Materials in Sample Preparation: A Journey from Past to Present and into the Future.

Even though instrumental advancements are constantly being made in analytical chemistry, sample preparation is still considered the bottleneck of analytical methods. To this end, researchers are developing new sorbent materials to improve and replace existing ones, with the ultimate goal to improve current methods and make them more efficient and effective. A few years ago, an alternative trend was started toward sample preparation: the use of sponge or sponge-like materials. These materials possess favorable characteristics, such as negligible weight, open-hole structure, high surface area, and variable surface chemistry. Although their use seemed promising, this trend soon reversed, due to either the increasing use of nanomaterials in sample preparation or the limited scope of the first materials. Currently, with the development of new materials, such as melamine sponges, along with the advancement in nanotechnology, this topic was revived, and various functionalizations were carried out on such materials. The new materials are used as sorbents in sample preparation in analytical chemistry. This review explores the development of such materials, from the past to the present and into the future, as well as their use in analytical chemistry.

Induced toxicity in early-life stage zebrafish (Danio rerio) and its behavioral analysis after exposure to non-doped, nitrogen-doped and nitrogen, sulfur-co doped carbon quantum dots.

In this study, the effects of doping of CQDs with alternative functional groups (dopants) were evaluated through embryonic development of zebrafish (Danio rerio). The CQDs were synthesized using simple and low-cost sources: Non-doped (citric acid was used as the carbon source), nitrogen-doped (N-doped) and nitrogen, sulfur-co-doped (N,S-doped). The CQDs induced significant toxicity to zebrafish (>150 µg/mL) and the toxic effects were dose-dependent. The N,S-doped CQDs were the most toxic (LD50 = 149.92 µg/mL), followed by the N-doped CQDs (LD50 = 399.95 µg/mL) while the non-doped CQDs were the least toxic (LD50 = 548.48 µg/mL) of the three. The growth rate (GR) was affected following the toxicity pattern (GRNS-doped

Cannabinol in the spotlight: Toxicometabolomic study and behavioral analysis of zebrafish embryos exposed to the unknown cannabinoid.

Cannabinol (CBN) is a degradation product of the cannabis metabolite Δ9-tetrahydrocannabinol. The CBN concentration in cannabis leaves ranges between 0.1 and 1.6% (w/w of dry weight); it increases as the plant ages and its formation is affected by the storage conditions. As CBN has not been extensively studied so far, the need to examine its impact in vivo is imperative due to the increasing use of cannabis globally. In the study herein, the CBN toxicity, effects on heart physiology, morphological malformations, behavioral changes and alterations in metabolic pathways of zebrafish larvae upon CBN exposure to sublethal concentrations were examined. The LD50 value was estimated at 1.12 mg/l. At the same time, malformations in zebrafish larvae increased significantly in a dose-dependent manner and exposure to CBN concentrations greater than 0.75 mg/l provoked abnormalities like pericardial edema, yolk sac anomalies and tail bending. Concentrations above this threshold resulted in elongated and shorter in width hearts and in separation of ventricle from atrium. The total movement distance and velocity were increased in dark and decreased in light conditions, in a concentration-dependent manner. Our results showed that CBN acts both as a stimulant and a sedative, with larvae to exhibit altered velocity and bradycardia, respectively. The metabolomic analysis revealed alterations mainly to amino acids, which are related to acute toxicity and hint towards systemic metabolic and neuropathophysiological changes. Taken together, our data indicate increased toxic effects as CBN exposure concentration increases, which should be taken into consideration when studying the impact of cannabis on organisms.

Metabolic Fingerprinting of Bacteria Exposed to Nanomaterials, Using Online Databases, NMR, and High-Resolution Mass Spectrometry.

Nanomaterials are examined more and more for their antibacterial properties. Herein, we propose a method for assessing the bactericidal properties of nanomaterials against Escherichia coli and Staphylococcus aureus, as well as a method to investigate the metabolic alterations occurring to bacteria, induced by their exposure to nanomaterials. Bacterial metabolome is extracted and metabolic fingerprint is recorded by 1H-NMR. Using metabolomic databases, the tentative metabolites in the samples are revealed, which are further confirmed by UHPLC-HRMS. Finally, conducting a pathway analysis, the metabolic network is revealed.

Matrix solid-phase dispersion based on magnetic ionic liquids: An alternative sample preparation approach for the extraction of pesticides from vegetables.

In this study, we propose, for the first time, the direct use of a magnetic ionic liquid (MIL) in a matrix solid-phase extraction procedure. Because of the magnetic properties, the MIL can be harvested directly after the extraction step, using a magnet, while its hydrophobic nature makes feasible the extraction of analytes. Raw vegetables of high water content can be analyzed without any pretreatment. The viscous nature of the selected MIL assists in blending with the matrix, while its hydrophobicity facilitates easier separation and retrieval. Additionally, no solid dispersing materials or co-sorbents are needed. A simple, low-cost analytical method for the determination of multi-class pesticides residues in raw vegetables was developed, with satisfactory recoveries.

Melamine Sponge Functionalized with Urea-Formaldehyde Co-Oligomers as a Sorbent for the Solid-Phase Extraction of Hydrophobic Analytes.

A new procedure for the functionalization of melamine sponge (MeS) with urea-formaldehyde (UF) co-oligomers is put forward. The procedure differs from the typical synthesis of the UF co-polymer, as it employs a base-catalyzed condensation step at certain concentrations of urea and formaldehyde. The produced melamine-urea-formaldehyde (MUF) sponge cubes are hydrophobic, despite the presence of hydrophilic groups in the oligomers. The MUF sponge developed herein is used as a sorbent for the solid-phase extraction of 10 analytes, from 6 different classes (i.e., non-steroidal anti-inflammatory drugs, benzophenones, parabens, phenols, pesticides and musks) and an analytical method is developed for their liquid chromatographic separation and detection. Low limits of quantification (0.03 and 1.0 µg L-1), wide linear ranges and excellent recoveries (92⁻100%) are some of the benefits of the proposed procedure. The study of the synthesis conditions of MUF cubes reveals that by altering them the hydrophilic/lipophilic balance of the MUF cubes can be tuned, hinting towards a strong potential for many other applications.

Enhanced magnetic ionic liquid-based dispersive liquid-liquid microextraction of triazines and sulfonamides through a one-pot, pH-modulated approach.

In this study, an enhanced variant of magnetic ionic liquid (MIL)-based dispersive liquid-liquid microextraction is put forward. The procedure combines a water insoluble solid support and the [P66614+][Dy(III)(hfacac)4-] MIL, in a one-pot, pH-modulated procedure for microextraction of triazines (TZs) and sulfonamides (SAs). The solid supporting material was mixed with the MIL to overcome difficulties concerning the weighing of MIL and to control the uniform dispersion of the MIL, rendering the whole extraction procedure more reproducible. The pH-modulation during extraction step makes possible the one-pot extraction of SAs and TZs, from a single sample, in 15 min. Overall, the new analytical method developed enjoys the benefits of sensitivity (limits of quantification: 0.034-0.091 µg L-1) and precision (relative standard deviation: 5.2-8.1%), while good recoveries (i.e., 89-101%) were achieved from lake water and effluent from a municipal wastewater treatment plant. Owing to all of the above, the new procedure can be used to determine the concentrations of SAs and TZs at levels below the maximum residue limits.

Highly fluorescent N-doped carbon nanodots as an effective multi-probe quenching system for the determination of nitrite, nitrate and ferric ions in food matrices.

Tris-(hydroxymethyl)-aminomethane and urea were used as low-cost precursor compounds to synthesize highly fluorescent N-doped carbon nanodots (CNDs), in an environmentally-friendly, inexpensive process. The as-prepared CNDs exhibit blue fluorescence, excellent photostability under various conditions, water dispersibility and stability over several parameters, such as a wide range of pH. The N-doped CNDs were applied as a multi-probe fluorescence quenching system to the sensitive detection of nitrite (NO2-), nitrate (NO3-) and ferric (Fe3+) ions in food matrices. The recoveries from spiked food samples were fairly acceptable without significant interferences despite the complexity of the tested matrices. The decrease in fluorescence intensity is in linear relationship with the concentrations of NO2-, NO3- and Fe3+, in the ranges of 0.015-1.11 mM, 0.072-0.60 mM and 2.9-176 µΜ, respectively. The as-synthesized carbon dots were used for the detection of NO2-, NO3- and Fe3+ in food matrices after proper pretreatment, concluding that the multi-probe fluorescence system may potentially be implemented in food control. The FRET mechanism is able to describe the quenching of the CNDs-NO2- system, while the proportional temperature-dependent relationship with the slopes of calibration plots hint at a dynamic quenching mechanism. In the case of the CNDs-Fe3+ system, the slopes exhibit an inverse temperature dependence, indicating a static mechanism while there is no indication of a FRET mechanism.

Melamine sponge decorated with copper sheets as a material with outstanding properties for microextraction of sulfonamides prior to their determination by high-performance liquid chromatography.

In this study, the modification/loading of melamine sponge with metallic copper sheets (CuMeS) is discussed. The CuMeS is prepared in a fast, singe-step procedure, where concurrent production of copper oxides is avoided. The as-prepared CuMeS is utilized to develop a sensitive and selective sample preparation procedure to extract sulfonamides (SAs) from milk and water samples. The surface of the resulting CuMeS, after drying is rendered hydrophobic enabling hydrophobic interactions. To the best of our knowledge, this is the first time that the benefits of the high affinity of copper for SAs are reaped for analytical purposes. Due to the high selectivity, the proposed CuMeS-based procedure acts both as extraction and clean-up for the quantitative determination of SAs. The analytical method developed herein, which is based on the extractive potential of CuMeS, has the merits of wide linearity (including concentrations above and below the maximum residue limit of SAs), low limits of quantification (0.025-0.057µgL-1 for lake water and 0.23-1.05µgL-1 for milk samples), high enrichment factors and highly satisfactory recoveries and repeatability. The analytical method is validated according to the Commission Decision 657/2002/EC. Owing to the low cost of CuMeS and the straightforward procedure followed the proposed method can be applied to routine analysis of SAs.

Carbonization of Human Fingernails: Toward the Sustainable Production of Multifunctional Nitrogen and Sulfur Codoped Carbon Nanodots with Highly Luminescent Probing and Cell Proliferative/Migration Properties.

A simple yet effective method is employed to prepare multifunctional fluorescent carbon nanodots (CNDs) from human fingernails. The results demonstrate that the CNDs have excellent optical properties and a quantum yield of 81%, which is attributed to the intrinsic composition of the precursor material itself. The CNDs are used to develop an ultrasensitive fluorescent probe for the detection of hexavalent chromium (limit of detection: 0.3 nM) via a combined inner-filter and static mechanism. Moreover, the toxicity of the CNDs over four epithelial cell lines is assessed. A negligible toxicity is induced on the three of the cell lines, whereas an increase in HEK-293 cell viability is demonstrated, granting cell proliferation properties to the as-synthesized CNDs. According to cell cycle analysis, cell proliferation is achieved by enhancing the transition of cells from the S phase to the G2/M one. Interestingly, CNDs are found to significantly promote cell migration, maybe because of their free-radical scavenging ability, making the CNDs suitable for wound healing applications. In addition, relevant experiments have revealed the blood compatibility of the CNDs. Finally, the CNDs were found suitable for cell imaging applications, and all of the aforementioned merits make it possible for them to be used for extraordinary, more advanced biological applications.

Graphene-functionalized melamine sponges for microextraction of sulfonamides from food and environmental samples.

The study describes the functionalization of melamine sponges with graphene and its use as an adsorbent for the microextraction of sulfonamides from food and environmental samples. The graphene-functionalized melamine sponge (GMeS) was prepared by an easy, one-step procedure, which complies with the principles of green chemistry and is proved advantageous over previously described methods. The applicability of the GMeS in extraction procedures was studied and an analytical method for the determination of sulfonamides in milk, eggs and lake water was developed and validated according to SANCO/12571/2013 guideline. The developed method was highly accurate and reproducible, while the limits of quantification were found to be relatively low (0.31-0.91µgkg-1, 0.96-1.32µgkg-1 and 0.10-0.29µgL-1 in the case of milk, eggs and lake water respectively). Furthermore, matrix effects were absent in all cases, since the microextraction procedure serves also as a clean-up step. The low cost of synthesis, the environmentally friendly conditions, the efficiency and high extraction recoveries are some additional advantages of the proposed procedure. To the best of our knowledge, this is the first time that a GMeS is prepared in a straightforward way and used for analytical purposes.

Qualitative Alterations of Bacterial Metabolome after Exposure to Metal Nanoparticles with Bactericidal Properties: A Comprehensive Workflow Based on (1)H NMR, UHPLC-HRMS, and Metabolic Databases.

Metal nanoparticles (NPs) have proven to be more toxic than bulk analogues of the same chemical composition due to their unique physical properties. The NPs, lately, have drawn the attention of researchers because of their antibacterial and biocidal properties. In an effort to shed light on the mechanism through which the bacteria elimination is achieved and the metabolic changes they undergo, an untargeted metabolomic fingerprint study was carried out on Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria species. The (1)H NMR spectroscopy, in conjunction with high resolution mass-spectrometry (HRMS) and an unsophisticated data processing workflow were implemented. The combined NMR/HRMS data, supported by an open-access metabolomic database, proved to be efficacious in the process of assigning a putative annotation to a wide range of metabolite signals and is a useful tool to appraise the metabolome alterations, as a consequence of bacterial response to NPs. Interestingly, not all the NPs diminished the intracellular metabolites; bacteria treated with iron NPs produced metabolites not present in the nonexposed bacteria sample, implying the activation of previously inactive metabolic pathways. In contrast, copper and iron-copper NPs reduced the annotated metabolites, alluding to the conclusion that the metabolic pathways (mainly alanine, aspartate, and glutamate metabolism, beta-alanine metabolism, glutathione metabolism, and arginine and proline metabolism) were hindered by the interactions of NPs with the intracellular metabolites.

1-Butyl-3-aminopropyl imidazolium-functionalized graphene oxide as a nanoadsorbent for the simultaneous extraction of steroids and ß-blockers via dispersive solid-phase microextraction.

In this study, we describe the synthesis of graphene oxide functionalized with the ionic liquid 1-butyl-3-aminopropyl imidazolium chloride and its use as an adsorbent for the dispersive solid-phase microextraction (micro SPE) of four anabolic steroids and six ß-blockers from aqueous samples of environmental importance, prior to their HPLC-diode array detector analysis. As the ionic liquid is covalently attached to graphene oxide sheets, it is made possible for it to participate in the dispersive micro SPE procedure. The limits of detection and limits of quantification of the proposed method were found to be in the range of 7-23ng/L and between 20 and 70ng/L, respectively. The linearity was satisfactory, with the determination coefficients to range from 0.9940 to 0.9998 while the within- and between-day relative standard deviation of the method ranged between 3.1 and 7.6% and from 4.0 to 8.5%, respectively. In order to test the applicability of the proposed method in real-life samples, the effluent from a municipal wastewater treatment plant as well as natural water samples from two rivers and a lake were collected and analyzed. After the analysis of samples, the effluent from municipal wastewater treatment plant was fortified with the analytes, at concentrations equal to 2 and 10 times the LOQs. Recoveries were calculated after subtracting the native (no-spike) concentrations of analytes, when needed. All the recoveries were in the range of 87-98%. A comparison study attests to the superiority of the developed nanomaterial over graphene oxide and graphene for the dispersive micro SPE of steroids and ß-blockers.

Octyl-modified magnetic graphene as a sorbent for the extraction and simultaneous determination of fragrance allergens, musks, and phthalates in aqueous samples by gas chromatography with mass spectrometry.

An effective, simple, and low-cost sample preparation method based on dispersive SPE followed by GC with MS is developed for the multianalyte determination of fragrance allergens, musks, and phthalates, at sub-ppb levels. The extraction procedure is based on a novel magnetic graphene sorbent, which is functionalized with octylamine, taking advantage of the functionalization's hydrophobic properties and π-π interactions with the analytes. Two alkyl amines, the octylamine and octadecylamine are studied to introduce alkyl chains in the basal plane of graphene. Magnetic graphene- octadecylamine is proved to be highly hydrophobic to such a degree that is hard to disperse in the bulk aqueous matrixes. Because of this behavior, its extraction efficiency for the target analytes is low. The synthesis and applicability of the magnetic graphene-octylamine as more favored sorbent are optimized in terms of the most determining experimental conditions. The detection and quantification limits, which are calculated based on S/N ratio of 3 and 10, respectively, ranged from 0.29 to 3.2 ng L(-1) and from 0.89 to 9.6, respectively. The dispersive SPE is successfully applied to routine analysis for the determination of the target analytes in samples from municipal treatment plant of Ioannina (Greece), from Pamvotis Lake and baby bathwater. The reproducibility of the spiked biological treatment plant water sample is evaluated and the relative standard deviation values range between 2.1 and 9.4%.