ABSTRACT
Tuning the active site structure of metal-nitrogen-carbon electrocatalysts has recently attracted increasing interest. Herein, we report a bottom-up synthesis strategy in which atomically regulated N-doped polycyclic aromatic hydrocarbons (N-PAHs) of NxC42-x (x = 1, 2, 3, 4) were used as ligands to allow tuning of the active site's structures of M-Nx and establish correlations between the structures and electrocatalytic properties. Based on the synthesis process, detailed characterization, and DFT calculation results, active structures of Nx-Fe1-Nx in Fe1-Nx/RGO catalysts were constructed. The results demonstrated that the extra uncoordinated N atoms around the Fe1-N4 moieties disrupted the π-conjugated NxC42-x ligands, which led to more localized electronic state in the Fe1-N4 moieties and superior catalytic performance. Especially, the Fe1-N4/RGO exhibited optimized performance for ORR with E1/2 increasing by 80 mV and Jk at 0.85 V improved 18 times (compared with Fe1-N1/RGO). This synthesis strategy utilizing N-PAHs holds significant promise for enhancing the controllability of metal-nitrogen-carbon electrocatalyst preparation.
ABSTRACT
Developing efficient and anti-corrosive oxygen reduction reaction (ORR) catalysts is of great importance for the applications of proton exchange membrane fuel cells (PEMFCs). Herein, we report a novel approach to prepare metal oxides supported intermetallic Pt alloy nanoparticles (NPs) via the reactive metal-support interaction (RMSI) as ORR catalysts, using Ni-doped cubic ZrO2 (Ni/ZrO2) supported L10-PtNi NPs as a proof of concept. Benefiting from the Ni migration during RMSI, the oxygen vacancy concentrations in the support are increased, leading to an electron enrichment of Pt. The optimal L10-PtNi-Ni/ZrO2-RMSI catalyst achieves remarkably low mass activity (MA) loss (17.8 %) after 400,000 accelerated durability test cycles in a half-cell and exceptional PEMFC performance (MA=0.76â A mgPt -1 at 0.9â V, peak power density=1.52/0.92â W cm-2 in H2-O2/-air, and 18.4 % MA decay after 30,000â cycles), representing the best reported Pt-based ORR catalysts without carbon supports. Density functional theory (DFT) calculations reveal that L10-PtNi-Ni/ZrO2-RMSI requires a lower energetic barrier for ORR than L10-PtNi-Ni/ZrO2 (direct loading), which is ascribed to a decreased Bader charge transfer between Pt and *OH, and the improved stability of L10-PtNi-Ni/ZrO2-RMSI compared to L10-PtNi-C can be contributed to the increased adhesion energy and Ni vacancy formation energy within the PtNi alloy.
ABSTRACT
Developing high-performance electromagnetic interference (EMI) shielding materials that are lightweight and flexible and have excellent mechanical properties is an ideal choice for modern integrated electronic devices and microwave protection. Herein, we report the preparation of core-shell polyaniline (PANI)-based nanofiber membranes for EMI shielding through seed polymerization. Electrospinning a PANI solution leads to homogeneously dispersed PANI on the nanofiber surface, with abundant attachment sites for aniline through electrostatic adsorption and hydrogen bonding interaction, allowing PANI to grow on the nanofiber surfaces. This stable core-shell heterostructure provides more interfaces for reflecting and absorbing microwaves. The PANI/PVDF@PANI membranes achieved a shielding efficiency (SE) of 44.7 dB at a thickness of only 1.2 mm, exhibiting an exceptionally high specific EMI shielding effectiveness (SE/t) of 372.5 dB cm-1. Furthermore, the composite membrane exhibits outstanding mechanical stability, durability, air permeability, and moisture permeability, also making it suitable for applications such as EM shielding clothing.
ABSTRACT
Organic-inorganic hybrid perovskite solar cells (PSCs) have achieved an impressive certified efficiency of 25.7%, which is comparatively higher than that of commercial silicon solar cells (23.3%), showing great potential toward commercialization. However, the low stability and high toxicity due to the presence of volatile organic components and toxic metal lead in the perovskites pose significant challenges. To obtain robust and low-toxicity PSCs, substituting organic cations with pure inorganic cations, and partially or fully replacing the toxic Pb with environmentally benign metals, is one of the promising methods. To date, continuous efforts have been made toward the construction of highly performed low-toxicity inorganic PSCs with astonishing breakthroughs. This review article provides an overview of recent progress in inorganic PSCs in terms of lead-reduced and lead-free compositions. The physical properties of poor-lead all-inorganic perovskites are discussed to unveil the major challenges in this field. Then, it reports notable achievements for the experimental studies to date to figure out feasible methods for efficient and stable poor-lead all-inorganic PSCs. Finally, a discussion of the challenges and prospects for poor-lead all-inorganic PSCs in the future is presented.
ABSTRACT
Pb-Sn mixed inorganic perovskite solar cells (PSCs) have garnered increasing interest as a viable solution to mitigate the thermal instability and lead toxicity of hybrid lead-based PSCs. However, the relatively poor structural stability and low device efficiency hinder its further development. Herein, high-performance manganese (Mn)-doped Pb-Sn-Mn-based inorganic perovskite solar cells (PSCs) are successfully developed by introducing Benzhydroxamic Acid (BHA) as multifunctional additive. The incorporation of smaller divalent Mn cations contributes to a contraction of the perovskite crystal, leading to an improvement in structural stability. The BHA additive containing a reductive hydroxamic acid group (OâC-NHOH) not only mitigates the notorious oxidation of Sn2+ but also interacts with metal ions at the B-site and passivates related defects. This results in films with high crystallinity and low defect density. Moreover, the BHA molecules tend to introduce a near-vertical dipole moment that parallels the built-in electric field, thus facilitating charge carrier extraction. Consequently, the resulting device delivers a champion PCE as high as 17.12%, which represents the highest reported efficiency for Pb-Sn-based inorganic PSCs thus far. Furthermore, the BHA molecule provides an in situ encapsulation of the perovskite grain boundary, resulting in significant enhancement of device air stability.
ABSTRACT
Atmospheric particulate matter (PMs) pollution has raised increasing public concerns, especially with the outbreak of COVID-19. The preparation of high-performance membranes for air filtration is of great significance. Herein, the biosynthetic polymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) was adopted to create a hierarchical structure and biodegradable nonwoven membrane for PMs filtration through a facile directly electrospinning method. The as-prepared membranes with hierarchical structure contain abundant nanowires (5-100 nm) and microfibers (2-5 µm) with different diameter (1000-5000 nm). We have achieved realization of formation mechanisms of such bimodal micro- and nanofibers, which stem from the branching of microfiber at early stage of electrospinning. The PHBV membranes exhibit a very high PM0.3 removal efficiency of 99.999% and PM2.5 removal efficiency of 100% with 0.077% standard atmospheric pressure in the air flow speed of 5.3 cm/s. More importantly, the PHBV membranes can be completely disintegrated within 1 week under composted conditions, indicating the great biodegradability of PHBV membranes. Our work provides insights for the development of biodegradable, high performance air filters for pollutants, molds, bacteria, and viruses.
Subject(s)
COVID-19 , Nanofibers , Humans , Nanofibers/chemistry , Polyesters/chemistry , Polymers , Filtration/methodsABSTRACT
For the further improvement of the power conversion efficiency (PCE) and stability of perovskite solar cells (PSCs), the buried interface between the perovskite and the electron transport layer is crucial. However, it is challenging to effectively optimize this interface as it is buried beneath the perovskite film. Herein, we have designed and synthesized a series of multifunctional organic-inorganic (OI) complexes as buried interfacial material to promote electron extraction, as well as the crystal growth of the perovskite. The OI complex with BF4- group not only eliminates oxygen vacancies on the SnO2 surface but also balances energy level alignment between SnO2 and perovskite, providing a favorable environment for charge carrier extraction. Moreover, OI complex with amine (- NH2) functional group can regulate the crystallization of the perovskite film via interaction with PbI2, resulting in highly crystallized perovskite film with large grains and low defect density. Consequently, with rational molecular design, the PSCs with optimal OI complex buried interface layer which contains both BF4- and -NH2 functional groups yield a champion device efficiency of 23.69%. More importantly, the resulting unencapsulated device performs excellent ambient stability, maintaining over 90% of its initial efficiency after 2000 h storage, and excellent light stability of 91.5% remaining PCE in the maximum power point tracking measurement (under continuous 100 mW cm-2 light illumination in N2 atmosphere) after 500 h.
ABSTRACT
Transition metal sulfides (TMSs) are promising electrocatalysts for hydrogen evolution reaction (HER), while TMSs usually suffer from inevitable surface oxidation in air, and the impact of the surface oxidation on their HER catalytic activity remains unclear. Herein, we demonstrate an effective strategy for reducing the surface oxidation degree of easily oxidized CoS2 by introducing glued vanadium pentoxide (V2O5) nanoclusters, taking advantage of the preferential adsorption and strong interaction between high-valence V and O2. Combining oxidation protection and elaborate oxidation control experiments reveal that reduced surface oxidation degree of CoS2 is conducive to affording promising HER catalytic performance, as the oxidized surface of CoS2 can hinder the dissociation of water and thus is harmful to the HER process. Direct evidence is provided that surface oxidation should be carefully considered for TMS-based HER catalysts. The present work not only develops a new strategy for protecting CoS2 from surface oxidation, but also provides deep insight into the impact of surface oxidation on the HER performance of transition metal compounds.
ABSTRACT
Perovskite solar cells (PSCs) via two-step sequential method have received great attention in recent years due to their high reproducibility and low processing costs. However, the relatively high trap-state density and poor charge carrier extraction efficiency pose challenges. Herein, highly efficient and stable PSCs via a two-step sequential method are fabricated using organic-inorganic (OI) complexes as multifunctional interlayers. In addition to reduce the under-coordinated Pb2+ ions related trap states by forming interactions with the functional groups, the complexes interlayer tends to form dipole moment which can enhance the built-in electric field, thus facilitating charge carrier extraction. Consequently, with rational molecular design, the resulting devices with a vertical dipole moment that parallels with the built-in electric field yield a champion efficiency of 23.55% with negligible hysteresis. More importantly, the hydrophobicity of the (OI) complexes contributes to an excellent ambient stability of the resulting device with 91% of initial efficiency maintained after 3000 h storage.
ABSTRACT
Organic solar cells have become an important development direction in solar cell materials because of their low cost, light weight, and good flexibility. However, the size of their bandgap is difficult to continuously regulate, resulting in a low power conversion efficiency. In this work, an organic molecule TPEPA was synthesized, and its luminescence performance and polymerization under high pressure were studied by performing in situ Raman, IR, fluorescence, and UV-vis spectroscopy. The Raman and IR spectroscopic results show that single bonds (C-H, C-Ph) and long chains (C-C[triple bond, length as m-dash]C-C) are more unstable and prone to amorphization under high pressure. At 10 GPa, the TPEPA molecule undergoes a transition of amorphization accompanied by a few polymerizations in the C[triple bond, length as m-dash]C bond structure. After holding pressure at 20 GPa for one day and releasing to ambient pressure, the other peaks almost disappeared, while the new peak of C(sp3)-H from the polymerization of the benzene ring was observed, indicating that the irreversible amorphization and polymerization did occur. UV-vis spectra results show that the bandgap is reduced from 2.9 eV to 1.3 eV, which is just in the maximum conversion efficiency bandgap range (1.3-1.4 eV) of p-n junction solar cell materials. This pressure is within the working pressure range of a large volume press, which is favorable in applications of large-scale synthesis. Our strategy may provide a method for the large-scale synthesis of novel organic solar cell materials.
ABSTRACT
All-inorganic CsPbIBr2 perovskite solar cells (PSCs) have recently gained growing attention as a promising template to solve the thermal instability of organic-inorganic PSCs. However, the relatively low device efficiency hinders its further development. Herein, highly efficient and stable CsPb0.7 Sn0.3 IBr2 compositional perovskite-based inorganic PSCs are fabricated by introducing appropriate amount of multifunctional zinc oxalate (ZnOX). In addition to offset Pb and Sn vacancies through Zn2+ ions incorporation, the oxalate group can strongly interact with undercoordinated metal ions to regulate film crystallization, delivering perovskite film with low defect density, high crystallinity, and superior electronic properties. Correspondingly, the resulting device delivers a champion efficiency of 14.1%, which presents the highest reported efficiency for bromine-rich inorganic PSCs thus far. More importantly, chemically reducing oxalate group can effectively suppress the notorious oxidation of Sn2+ , leading to significant enhancement on air stability.
ABSTRACT
Chlorine-rich argyrodite-type solid electrolyte Li5.5PS4.5Cl1.5 has been a promising choice for solid-state batteries (SSBs) because of its ultrafast Li-ion conduction. However, the poor air/moisture stability and low electrochemical stability with pristine high-voltage cathodes hinder their applications. Herein, O-substituted Li5.5PS4.5-xOxCl1.5 (x = 0, 0.075, 0.175, and 0.25) solid electrolytes are successfully synthesized. Among them, Li5.5PS4.425O0.075Cl1.5 delivers high ionic conductivity, improved moisture resistance, and enhanced electrochemical stability in higher voltage windows. SSBs using Li5.5PS4.425O0.075Cl1.5 show higher capacities and superior cyclability than those using Li5.5PS4.5Cl1.5 combined with a pristine LiNi0.8Mn0.1Co0.1O2 cathode when operated at a high end-of-charge voltage of 4.5 V (vs Li+/Li0). Moreover, the batteries exhibit outstanding performance in a wide temperature range. This work provides a strategy to modify the inherent drawbacks of sulfide electrolytes, promoting their practical applications.
ABSTRACT
CsPbIxBry-based all-inorganic perovskite materials are a potential candidate for stable semitransparent and tandem structured photovoltaic devices. However, poor film (morphological and crystalline) quality and interfacial recombination lead consequently to a decline in the photoelectric conversion performance of the applied solar cells. In this work, we incorporated PbS quantum dots (QDs) at the interface of electron transporting layer (ETL) SnO2 and perovskite to modulate the crystallization of CsPbIBr2 and the interfacial charge dynamics in carbon-based solar cells. The as-casted PbS QDs behave as seeds for lattice-matching the epitaxial growth of pinhole-free CsPbIBr2 films. The modified films with reduced defect density exhibit facilitated carrier transfer and suppressed charge recombination at the ETL/perovskite interface, contributing to an enhanced device efficiency from 7.00 to 9.09% and increased reproducibility and ambient stability. This strategic method of QD-assisted lattice-matched epitaxial growth is promising to prepare high-quality perovskite films for efficient perovskite solar cells.
ABSTRACT
Traditional preparation of ZnO nanocrystal requires heating zinc acetate to a temperature over 350 °C, whereas in this work, zinc acetate was first electrospun with PVDF to form a nanofiber, followed by thermal treatment at only 140 °C to give nanocrystalline ZnO. The much lower temperature required in thermal treatment is attributed to the high reactivity of zinc acetate at nano dimension. The as-prepared ZnO-doped PVDF nanofiber mat shows excellent effect in the photocatalytic degradation of Rhodamine B, comparable to ZnO particle thermally treated at 600 °C. Highly-oriented ZnO nanorods were obtained by further hydrothermal synthesis of the electrospun nanofiber mat, giving nanostructured ZnO of different morphologies well-aligned on the surface of organic nanofiber. Notably, the hydrothermal synthesis of the successful preparation of these nanostructured ZnO requires a processing temperature below 100 °C at atmospheric pressure, showing great potential to be scaled up for vast manufacturing.
ABSTRACT
Face masks play a critical role in reducing the transmission risk of COVID-19 and other respiratory diseases. Masks made with nanofibers have drawn increasingly more attention because of their higher filtration efficiency, better comfort, and lower pressure drop. However, the interactions and consequences of the nanofibers and microwater droplets remain unclear. In this work, the evolution of fibers made of polymers with different contact angles, diameters, and mesh sizes under water aerosol exposure is systematically visualized. The images show that capillarity is very strong compared with the elasticity of the nanofiber. The nanofibers coalesce irreversibly during the droplet capture stage as well as the subsequent liquid evaporation stage. The fiber coalescence significantly reduces the effective fiber length for capturing aerosols. The nanofiber mesh that undergoes multiple droplet capture/evaporation cycles exhibits a fiber coalescing fraction of 40%-58%. The hydrophobic and orthogonally woven fibers can reduce the capillary forces and decrease the fiber coalescing fraction. This finding is expected to assist the proper design, fabrication, and use of face masks with nanofibers. It also provides direct visual evidence on the necessity to replace face masks frequently, especially in cold environments.
ABSTRACT
An effective and universal strategy is developed to enhance the stability of the non-noble-metal M-Nx /C catalyst in proton exchange membrane fuel cells (PEMFCs) by improving the bonding strength between metal ions and chelating polymers, i.e., poly(acrylic acid) (PAA) homopolymer and poly(acrylic acid-maleic acid) (P(AA-MA)) copolymer with different AA/MA ratios. Mössbauer spectroscopy and X-ray absorption spectroscopy (XAS) reveal that the optimal P(AA-MA)-Fe-N catalyst with a higher Fe3+ -polymer binding constant possesses longer FeN bonds and exclusive Fe-N4 /C moiety compared to PAA-Fe-N, which consists of ≈15% low-coordinated Fe-N2 /N3 structures. The optimized P(AA-MA)-Fe-N catalyst exhibits outstanding ORR activity and stability in both half-cell and PEMFC cathodes, with the retention rate of current density approaching 100% for the first 37 h at 0.55 V in an H2 -air fuel cell. Density functional theory (DFT) calculations suggest that the Fe-N4 /C site could optimize the difference between the adsorption energy of the Fe atoms on the support (Ead ) and the bulk cohesive energy (Ecoh ) relative to Fe-N2 /N3 moieties, thereby strongly stabilizing Fe centers against demetalation.
ABSTRACT
Renewable organic cathodes with abundant elements show promise for sustainable rechargeable batteries. Herein, for the first time, utilizing C60 fullerene as organic cathode for room-temperature lithium-ion battery is reported. The C60 cathode shows robust electrochemical performance preferably in ether-based electrolyte. It delivers discharge capacity up to 120 mAh g-1 and specific energy exceeding 200 Wh kg-1 with high initial Coulombic efficiency of 91%. The as-fabricated battery holds a capacity of 90 mAh g-1 after 50 cycles and showcases remarkable rate performance with 77 mAh g-1 retained at 500 mA g-1 . Noteworthily, three couples of unusual flat voltage plateaus recur at ≈2.4, 1.7, and 1.5 V, respectively. Diffusion-dominated three-electron-redox reactions are revealed by cyclic voltammogram and plateau capacities. Intriguingly, it is for the first time unveiled by in situ X-ray diffraction (XRD) that the C60 cathode underwent three reversible phase transitions during lithiation/delithiation process, except for the initial discharge when irreversible polymerization in between C60 nanoclusters existed as suggested by the characteristic irreversible peak shifts in both in situ XRD pattern and in situ Raman spectra. Cs-corrected transmission electron microscope corroborated these phase evolutions. Importantly, delithiation potentials derived from density-functional-theory simulation based on proposed phase structures qualitatively consists with experimental ones.
ABSTRACT
Exploiting platinum-group-metal (PGM)-free electrocatalysts with remarkable activity and stability toward oxygen reduction reaction (ORR) is of significant importance to the large-scale commercialization of proton exchange membrane fuel cells (PEMFCs). Here, a high-performance and anti-Fenton reaction cobalt-nitrogen-carbon (Co-N-C) catalyst is reported via employing double crosslinking (DC) hydrogel strategy, which consists of the chemical crosslinking between acrylic acid (AA) and acrylamide (AM) copolymerization and metal coordinated crosslinking between Co2+ and P(AA-AM) copolymer. The resultant DC hydrogel can benefit the Co2+ dispersion via chelated Co-N/O bonds and relieve metal agglomeration during the subsequent pyrolysis, resulting in the atomically dispersed Co-Nx/C active sites. By optimizing the ratio of AA/AM, the optimal P(AA-AM)(5-1)-Co-N catalyst exhibits a high content of nitrogen doping (12.36 at%) and specific surface area (1397 m2 g-1 ), significantly larger than that of the PAA-Co-N catalyst (10.59 at%/746 m2 g-1 ) derived from single crosslinking (SC) hydrogel. The electrochemical measurements reveal that P(AA-AM)(5-1)-Co-N possesses enhanced ORR activity (half-wave potential (E1/2 ) ≈0.820 V versus the reversible hydrogen electrode (RHE)) and stability (≈4 mV shift in E1/2 after 5000 potential cycles in 0.5 m H2 SO4 at 60 ºC) relative to PAA-Co-N, which is higher than most Co-N-C catalysts reported so far.
Subject(s)
Carbon , Hydrogels , Catalysis , Electrodes , OxygenABSTRACT
Low-work-function (WF) metals (including silver (Ag), aluminum (Al), and copper (Cu)) used as external cathodes in inverted perovskite solar cells (PSCs) encounter oxidation caused by air exposure and halogen-diffusion-induced corrosion, which threaten the long-term stability of the device. The cathode interlayer (CIL) has shown promise in reducing the metal WF and thus boosting the device power conversion efficiency (PCE). However, it remains a challenge for current CIL materials to enable high-WF metals (e.g., Au) to be used as cathodes to achieve PSCs with a superior PCE and long-term stability. Here, we use a series of synthesized (carbolong-derived) organometallic complexes as CILs to tune the electrode WF in inverted PSCs. Density functional theory calculations and surface characterizations show that the organometallic complexes that contain anions and cations are prone to form anion-cation dipoles on the metal surface, hence drastically reducing the metal's WF. Photovoltaic devices based on a Ag cathode, which was modified with these organometallic complexes, received a boosted PCE up to 21.29% and a remarkable fill factor that reached 83.52%, which are attributed to the dipole-enhanced carrier transport. The environmental stability of PSCs was further improved after employing Au as a cathode with these organometallic complexes, and the modified devices exhibited no efficiency loss after 4080 h storage measurements.
ABSTRACT
Inspired by the structural advantages of spiro-OMeTAD, which is the most commonly used hole-transporting material (HTM), two rationally designed HTMs with butterfly-shaped triarylamine groups based on dibenzofulvene-bridged indacenodithiophene (IDT) core (attaching hexyl and octyl chains) have been synthesized, namely, IT-C6 and IT-C8, respectively. Shorter alkyl-chain-based IT-C6 exhibits a marked increase in glass-transition temperature (Tg) of 105 °C, whereas IT-C8 shows a Tg of 95 °C. Moreover, it is demonstrated that IT-C6 exhibits a higher hole-transporting mobility, more suitable band energy alignment, better interfacial contact, and passivation effect. The inverted devices of employed HTM based on IT-C6 obtained a champion PCE of 18.34% with a remarkable fill factor (FF) of 82.32%, whereas the IT-C8-based device delivered an inferior PCE of 16.94% with an FF up to 81.20%. Both HTMs embodied inverted devices present high FF values greater than 81%, which are among the highest reported values of small molecular HTM-based PSCs. This work reveals that cutting off the symmetrical spiro-core and subsequently combining IDT (attaching tailored alkyl chains) with the spiro-linkage fluorine to construct the orthogonal molecular conformation is a significant principle for the design of promising dopant-free HTMs.