ABSTRACT
Gold nanomaterials have been widely explored in electrochemical sensors due to their high catalytic property and good stability in multi-medium. In this paper, the reproducibility of the signal among batches of gold nanorods (AuNRs)-modified electrodes was investigated to improve the data stabilization and repeatability. Ordered and random self-assembled AuNRs-modified electrodes were used as electrochemical sensors for the simultaneous determination of dopamine (DA) and topotecan (TPC), with the aim of obtaining an improved signal stability in batches of electrodes and realizing the simultaneous determination of both substances. The morphology and structure of the assemblies were analyzed and characterized by UV-Vis spectra, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray powder diffraction (XRD). Electrochemical studies showed that the ordered AuNRs/ITO electrodes have excellent signal reproducibility among several individuals due to the homogeneous mass transfer in the ordered arrangement of the AuNRs. Under the optimized conditions, the simultaneous detection results of DA and TPC showed good linearity in the ranges 1.75-45 µM and 1.5-40 µM, and the detection limits of DA and TPC were 0.06 µM and 0.17 µM, respectively. The results showed that the prepared ordered AuNR/ITO electrode had high sensitivity, long-term stability, and reproducibility for the simultaneous determination of DA and TPC, and it was expected to be applicable for real sample testing.
Subject(s)
Dopamine , Electrochemical Techniques , Electrodes , Gold , Limit of Detection , Nanotubes , Topotecan , Dopamine/analysis , Gold/chemistry , Topotecan/analysis , Topotecan/chemistry , Reproducibility of Results , Electrochemical Techniques/methods , Electrochemical Techniques/instrumentation , Nanotubes/chemistry , HumansABSTRACT
OBJECTIVE: To compare intensity reduction plans for liver cancer with or without a magnetic field and optimize field and subfield numbers in the intensity-modulated radiotherapy (IMRT) plans designed for liver masses in different regions. METHODS: This retrospective study included 62 patients who received radiotherapy for liver cancer at Shandong Cancer Hospital. Based on each patient's original individualized intensity-modulated plan (plan1.5 T), a magnetic field-free plan (plan0 T) and static intensity-modulated plan with four different optimization schemes were redesigned for each patient. The differences in dosimetric parameters among plans were compared. RESULTS: In the absence of a magnetic field in the first quadrant, PTV Dmin increased (97.75 ± 17.55 vs. 100.96 ± 22.78)%, Dmax decreased (121.48 ± 29.68 vs. 119.06 ± 28.52)%, D98 increased (101.35 ± 7.42 vs. 109.35 ± 26.52)% and HI decreased (1.14 ± 0.14 vs. 1.05 ± 0.01). In the absence of a magnetic field in the second quadrant, PTV Dmin increased (84.33 ± 19.74 vs. 89.96 ± 21.23)%, Dmax decreased (105 ± 25.08 vs. 104.05 ± 24.86)%, and HI decreased (1.04 ± 0.25 vs. 0.99 ± 0.24). In the absence of a magnetic field in the third quadrant, PTV Dmax decreased (110.21 ± 2.22 vs. 102.31 ± 26)%, L-P V30 decreased (10.66 ± 9.19 vs. 5.81 ± 3.22)%, HI decreased (1.09 ± 0.02 vs. 0.98 ± 0.25), and PTV Dmin decreased (92.12 ± 4.92 vs. 89.1 ± 22.35)%. In the absence of a magnetic field in the fourth quadrant, PTV Dmin increased (89.78 ± 6.72 vs. 93.04 ± 4.86)%, HI decreased (1.09 ± 0.01 vs. 1.05 ± 0.01) and D98 increased (99.82 ± 0.82 vs. 100.54 ± 0.84)%. These were all significant differences. In designing plans for tumors in each liver region, a total number of subfields in the first area of 60, total subfields in the second zone of 80, and total subfields in the third and fourth zones of 60 or 80 can achieve the dose effect without a magnetic field. CONCLUSION: In patients with liver cancer, the effect of a magnetic field on the target dose is more significant than that on doses to organs at risk. By controlling the max total number of subfields in different quadrants, the effect of the magnetic field can be greatly reduced or even eliminated.
Subject(s)
Liver Neoplasms , Radiotherapy, Intensity-Modulated , Humans , Retrospective Studies , Radiotherapy Dosage , Liver Neoplasms/radiotherapy , Magnetic Fields , Radiotherapy Planning, Computer-Assisted , Organs at RiskABSTRACT
Objective: We proposed a scheme for automatic patient-specific segmentation in Magnetic Resonance (MR)-guided online adaptive radiotherapy based on daily updated, small-sample deep learning models to address the time-consuming delineation of the region of interest (ROI) in the adapt-to-shape (ATS) workflow. Additionally, we verified its feasibility in adaptive radiation therapy for esophageal cancer (EC). Methods: Nine patients with EC who were treated with an MR-Linac were prospectively enrolled. The actual adapt-to-position (ATP) workflow and simulated ATS workflow were performed, the latter of which was embedded with a deep learning autosegmentation (AS) model. The first three treatment fractions of the manual delineations were used as input data to predict the next fraction segmentation, which was modified and then used as training data to update the model daily, forming a cyclic training process. Then, the system was validated in terms of delineation accuracy, time, and dosimetric benefit. Additionally, the air cavity in the esophagus and sternum were added to the ATS workflow (producing ATS+), and the dosimetric variations were assessed. Results: The mean AS time was 1.40 [1.10-1.78 min]. The Dice similarity coefficient (DSC) of the AS model gradually approached 1; after four training sessions, the DSCs of all ROIs reached a mean value of 0.9 or more. Furthermore, the planning target volume (PTV) of the ATS plan showed a smaller heterogeneity index than that of the ATP plan. Additionally, V5 and V10 in the lungs and heart were greater in the ATS+ group than in the ATS group. Conclusion: The accuracy and speed of artificial intelligence-based AS in the ATS workflow met the clinical radiation therapy needs of EC. This allowed the ATS workflow to achieve a similar speed to the ATP workflow while maintaining its dosimetric advantage. Fast and precise online ATS treatment ensured an adequate dose to the PTV while reducing the dose to the heart and lungs.
ABSTRACT
Purpose. Accurate image registration is an important step in online image-guided adaptive radiotherapy. The aim of this study was to investigate the effects of different factors on registration accuracy in a magnetic resonance (MR)-guided adaptive radiotherapy workflow.Materials and Methods. A thorax motion phantom was used to obtain computed tomography (CT) simulations in 8 different motion modes and to generate 8 reference plans. Daily pretreatment online MR images were obtained at 5 different positions in each reference plan. Online MR and CT simulations were separately registered using bone structures and the gross tumor volume (GTV) as ROIs, and the image shift distance was recorded by the online treatment planning system. The difference between the shift distance and the real isocentric distance was the registration error. The registration error was analyzed, and the effects of the setup position, motion mode and ROI selection on the registration error were investigated by multivariate analysis of variance.Result. The minimum values of registration error (ΔX, ΔY, ΔZ) were -1.90 mm, -2.70 mm and -2.40 mm, respectively, and the maximum values were 1.70 mm, 4.30 mm and -0.90 mm. ΔY showed the maximum mean standard deviation of 1.25 mm, and ΔZshowed the minimum mean standard deviation of 0.27 mm. The standard deviation of the registration error is largest in the inferior/superior direction. The motion mode of the phantom and ROI selection were significantly correlated with ΔX, ΔY, and ΔZ(p< 0.05).Conclusion. The registration result with the spine as the selected ROI was better than that with the GTV as the ROI. In 1.5 T MR-linac clinical treatment, more attention should be given to patient movement repeatability and to controlling the intrafractional motion as much as possible. It is not recommended to make the GTV-PTV margin expansion less than 2 mm for MR-linac.
Subject(s)
Radiotherapy Planning, Computer-Assisted , Radiotherapy, Image-Guided , Humans , Radiotherapy Planning, Computer-Assisted/methods , Magnetic Resonance Imaging/methods , Radiotherapy, Image-Guided/methods , Particle Accelerators , Tomography, X-Ray Computed , Radiotherapy DosageABSTRACT
The aim of this study was to evaluate the potential toxicity of spirotetramat to the earthworm Eisenia fetida in a natural soil environment. Many biochemical markers, viz., superoxide dismutase (SOD), catalase (CAT), peroxidase (POD), glutathione S-transferase (GST), cellulase, and malondialdehyde (MDA) contents were measured after exposure to 0.25, 1.25, and 2.5mgkg(-1) for 2, 7, 14, 21, and 28days. In addition, the comet assay was performed on earthworm coelomocytes to assess the level of genetic damage. The results demonstrate that the SOD activity and MDA content were significantly stimulated by the highest dose (2.5mgkg(-1)) of spirotetramat for the entire period of exposure. The activities of CAT and POD increased significantly by 2d and 21d, respectively, but the activities of both were significantly inhibited after prolonged exposure (28d). After an initial increase on the 2nd day, the cellulase activity in the high-dose treatment group was significantly inhibited for the entire remaining exposure period. The comet assay results demonstrate that spirotetramat (⩽2.5mgkg(-1)) can induce low and intermediate degrees of DNA damage in earthworm coelomocytes. The results indicate that spirotetramat may pose potential biochemical and genetic toxicity to earthworms (E. fetida), and this information is helpful for understanding the ecological toxicity of spirotetramat on soil invertebrate organisms.
Subject(s)
Aza Compounds/toxicity , DNA Damage , Environmental Monitoring/methods , Oligochaeta/drug effects , Soil Pollutants/toxicity , Soil/chemistry , Spiro Compounds/toxicity , Animals , Aza Compounds/analysis , Biomarkers/analysis , Catalase/metabolism , Comet Assay , Glutathione Transferase/metabolism , Malondialdehyde/metabolism , Oligochaeta/enzymology , Oligochaeta/genetics , Peroxidase/metabolism , Soil/standards , Soil Pollutants/analysis , Spiro Compounds/analysis , Superoxide Dismutase/metabolismABSTRACT
Bifidobacterium longum subsp. longum CMCC P0001, a standard probiotic strain in China, has been widely used in clinical medicine for more than 20 years. Here we report the genome features of B. longum strain CMCC P0001.
ABSTRACT
Silver carp were introduced into the pre-sedimentation pond to control excessive phytoplankton in raw water. The effectiveness of the filter-feeding silver carp on phytoplankton control and the effect of silver carp on phytoplankton community were investigated. The results showed that Microcystis could be effectively removed by silver carp stocked in the pre-sedimentation pond, and simultaneously, the concentration of single-cell phytoplankton increased obviously. The difference in phytoplankton species and single-cell phytoplankton size between in the water and in the gut of silver carp indicated that phytoplankton smaller than 5 microm, such as Chamydomonas and Platymonas, were almost not be filtered by silver carp, phytoplankton with the size between 5 and 20 Csm could be partly filtered, and large size phytoplankton, mainly colony-forming Microcystis could be filtered almost completely. These filter-feeding characteristics directly caused the phytoplankton size distribution biased toward miniaturization. Therefore, this biological treatment using silver carp could be applied only to deal with groups of Microcystis-dominated eutrophic water, and was not appropriate in water bodies where single-cell micro phytoplankton were dominant. Especially when silver carp are used in water treatment, a cautious attitude should be taken based on the evaluation of phytoplankton biomass and species structure features in raw water.
Subject(s)
Carps/physiology , Feeding Behavior/physiology , Phytoplankton/physiology , Animals , Body Water , Chlorophyll , Chlorophyll A , Fresh Water , Microcystis/physiology , Time Factors , Water SupplyABSTRACT
To reduce the negative effect of algae on conventional water treatment, a full-scale research of removing algae from algae-laden raw water by stocking filter-feeding silver carp was processed. After the pretreatment in a presedimentation tank with silver carp, the concentration of phytoplankton, the biomass of cyanobacteria and Microsystis flos-aquae in algae-laden raw water with Microsystis flos-aquae its dominant species decreased 61.8%, 76.1% and 78.2% respectively. This effective decrease of algae load on conventional process created favorable conditions for water treatment. Analysis indicates that food habit of silver carp and algae size are two causes of different removal efficiency between cyanobacteria and green algae. The results show that biomanipulation of silver carp is applicable for treating algae-laden raw water in which colonial cyanobacteria is dominant.
Subject(s)
Carps/physiology , Eukaryota/growth & development , Eutrophication , Feeding Behavior/physiology , Animal Feed , Animals , Fresh Water/analysis , Water Pollution/analysis , Water Pollution/prevention & control , Water Supply/analysisABSTRACT
Scanning electron microscopy, X-ray fluorescence spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy were used to analyze the microstructure, chemical composition, crystalline structure and compound constitute of the corrosion scale from cast iron pipe and galvanized steel pipe in drinking water distribution systems. The outer of the corrosion scale was compact, while the inner was porous. Iron was the primary chemical element of the corrosion scale, and the composition of the scale was iron compounds. The outer scale were ferric compounds such as alpha-FeOOH, gamma-FeOOH, alpha-Fe2O3, gamma-Fe2O3, FeCl3, while the inner were ferrous compounds such as Fe3O4, FeCl2, FeCO3. The characteristics of the corrosion scale was lying on hydraulic conditions and water quality in distribution systems, and the characteristics of iron pipe materials.
Subject(s)
Iron/analysis , Water Pollutants, Chemical/chemistry , Water Supply/analysis , Corrosion , Ferric Compounds/analysis , Ferric Compounds/chemistry , Ferrous Compounds/analysis , Ferrous Compounds/chemistry , Iron/chemistry , Microscopy, Electron, Scanning , Spectrometry, X-Ray Emission , X-Ray DiffractionABSTRACT
Variation rule of iron in drinking water distribution systems was studied, and it was found that the iron released from the scale to the bulk water was the primary reason for iron overstep. The main chemical composition of the scale in cast iron pipe and galvanized steel pipe was iron in a northern city in China. In the drinking water distribution systems, when the value of dissolved oxygen or chlorine residual was low, the iron release phenomenon was severe. The reason for that was the passivation layer of the corrosion scale was destroyed in reductive condition and the result was a great amount of iron in ferrous form was released. According to the research results, the control methods for iron release and 'red water' phenomenon were indicated.
Subject(s)
Ferrous Compounds/analysis , Water Pollutants, Chemical/analysis , Water Purification/methods , Water Supply/analysis , China , Corrosion , Iron/analysisABSTRACT
A field study on the estimation and analysis of iron stability in drinking water distribution system was carried out in a city of China. The stability of iron ion was estimated by pC-pH figure. It was found that iron ion was unstable, with a high Fe(OH)3 precipitation tendency and obvious increase in turbidity. The outer layer of the corrosion scale was compact, while the inner core was porous. The main composition of the scale was iron, and the possible compound constitutes of the outer scale were a-FeOOH, gamma-FeOOH, alpha-Fe2O3, gamma-Fe2O3, FeCl3, while the inner were Fe3O4, FeCl2, FeCO3. According to the characteristics of the corrosion scale, it was thought that the main reason for iron instability was iron release from corrosion scale. Many factors such as pipe materials, dissolved oxygen and chlorine residual affect iron release. Generally, higher iron release occurred with lower dissolved oxygen or chlorine residual concentration, while lower iron release occurred with higher dissolved oxygen or chlorine residual concentration. The reason was considered that the passivated out layer of scale of ferric oxide was broken down by reductive reaction in a condition of low oxidants concentration, which would result more rapid corrosion of the pipe and red water phenomenon.