Expansion of omega-3 polyunsaturated fatty acid metabolism of the oleaginous diatom Fistulifera solaris by genetic engineering.

Omega-3 polyunsaturated fatty acids (PUFAs), such as eicosapentaenoic acid (EPA; C20:5n-3) and docosahexaenoic acid (DHA; C22:6n-3) are widely used as additives in fish feed in the aquaculture sector. To date, the supply of omega-3 PUFAs have heavily depended upon fish oil production. As the need for omega-3 PUFAs supply for the growing population increases, a more sustainable approach is required to keep up with the demand. The oleaginous diatom Fistulifera solaris is known to synthesize EPA with the highest level among autotrophically cultured microalgae, however, this species does not accumulate significant amounts of DHA, which, in some cases, is required in aquaculture rather than EPA. This is likely due to the lack of expression of essential enzymes namely Δ5 elongase (Δ5ELO) and Δ4 desaturase. In this study, we identified endogenous Δ5ELO genes in F. solaris and introduced recombinant expression cassettes harboring Δ5ELO into F. solaris through bacterial conjugation. As a result, it managed to induce the synthesis of docosapentaenoic acid (DPA; C22:5n-3), a direct precursor of DHA. This study paves the way for expanding our understanding of the omega-3 PUFAs pathway using endogenous genes in the oleaginous diatom.

Line image sensor-based colony fingerprinting system for rapid pathogenic bacteria identification.

The rapid identification of pathogenic bacteria is crucial across various industries, including food or beverage manufacturing. Bacterial microcolony image-based classification has emerged as a promising approach to expedite identification, automate inspections, and reduce costs. However, conventional imaging methods have significant practical limitations, namely low throughput caused by the limited imaging range and slow imaging speed. To address these challenges, we developed an imaging system based on a line image sensor for rapid and wide-field imaging compared to existing colony imaging methods. This system can image a standard Petri dish (92 mm in diameter) completely within 22 s, successfully acquiring bacterial microcolony images. This process yielded a set of discrimination parameters termed as colony fingerprints, which were employed for machine learning. We demonstrated the performance of our system by identifying Staphylococcus aureus in food products using a machine learning model trained on a colony fingerprint dataset of 15 species from 9 genera, including foodborne pathogens. While conventional mass spectrometry-based methods require 24 h of incubation, our colony fingerprinting approach achieved 96% accuracy in just 10 h of incubation. Line image sensor offer high imaging speeds and scalability, allowing for swift and straightforward microbiological testing, eliminating the need for specialized expertise and overcoming the limitations of conventional methods. This innovation marks a transformative shift in industrial applications.

Lipid membrane modulated control of magnetic nanoparticles within bacterial systems.

Bacterial magnetosomes synthesized by the magnetotactic bacterium Magnetospirillum magneticum are suitable for biomedical and biotechnological applications because of their high level of chemical purity of mineral with well-defined morphological features and a biocompatible lipid bilayer coating. However, utilizations of native magnetosomes are not sufficient for maximum effectiveness in many applications as the appropriate particle size differs. In this study, a method to control magnetosome particle size is developed for integration into targeted technological applications. The size and morphology of magnetosome crystals are highly regulated by the complex interactions of magnetosome synthesis-related genes; however, these interactions have not been fully elucidated. In contrast, previous studies have shown a positive correlation between vesicle and crystal sizes. Therefore, control of the magnetosome vesicle size is tuned by modifying the membrane lipid composition. Exogenous phospholipid synthesis pathways have been genetically introduced into M. magneticum. The experimental results show that these phospholipids altered the properties of the magnetosome membrane vesicles, which yielded larger magnetite crystal sizes. The genetic engineering approach presented in this study is shown to be useful for controlling magnetite crystal size without involving complex interactions of magnetosome synthesis-related genes.

Characterization of oil body-associated proteins obtained from oil bodies with different sizes in oleaginous diatom Fistulifera solaris.

Oil body-associated proteins from the oleaginous diatom Fistulifera solaris were identified by proteomic analysis of oil bodies of various sizes (small, middle, and large) by time-dependent culturing upon nutrient-starvation at 36, 96 and 168 h. This diatom strain has the capability to accumulate neutral lipids and triacylglycerol. Liquid chromatography-tandem mass spectrometry analysis revealed 662 proteins in all oil body sizes. Among these, 132 proteins were predicted to be localized to the endoplasmic reticulum. Seventeen proteins that exhibited a positive correlation with gene expression and the oil body size were selected as novel candidates for oil body-associated proteins. Among the 17 protein candidates, two proteins encoded by fso:g8246 and fso:g10200 were confirmed to be localized on the surface of the oil body and endoplasmic reticulum. A protein encoded by fso:g2514, which is involved in sterol biosynthesis, was also identified. This protein was likely to localize to mitochondria; however, inhibitor assays suggested that it might play a role in lipid degradation. Our work provides new insights into the proteomics of microalgae and provides a valuable strategy for boosting lipid productivity in microalgae.

Chromosome-Scale Genome Assembly of the Marine Oleaginous Diatom Fistulifera solaris.

Microalgae including diatoms are of interest for environmentally friendly manufacturing such as production of biofuels, chemicals, and materials. The highly oil-accumulating marine diatom Fistulifera solaris has been studied as a promising host organism to be employed for these applications. Recently reported large-scale genetic engineering based on episomal vectors for diatoms could be useful to further enhance the potential of F. solaris, whereas we need to understand more the mode-of-action of diatom centromeres to rationally design the episomal vectors for stable extrachromosomal maintenance. Our previous genome analysis with pyrosequencing (short read sequencing) had generated the fragmented scaffolds which were not useful to predict centromeres on each chromosome. Here, we report the almost complete chromosomal structure of the genome of F. solaris using a long-read nanopore sequencing platform MinION. From just one single run using a MinION flow-cell, the chromosome-scale assembly with telomere-to-telomere resolution was achieved for 41 out of 44 chromosomes. Putative centromere regions were predicted from the 16 chromosomes, and we discovered putative consensus motifs in the predicted centromeres. Similar motif search had been performed in model diatoms, but no consensus motif was found. Therefore, this is the first study to successfully estimate consensus motifs in diatom centromeres. The chromosome-scale assembly also suggests the potential existence of multi-copy mini-chromosomes and tandemly repeated lipogenesis genes related to the oleaginous phenotype of F. solaris. Findings of this study are useful to understand and further engineer the oleaginous phenotype of F. solaris.

Direct Ink Write Printing of Chitin-Based Gel Fibers with Customizable Fibril Alignment, Porosity, and Mechanical Properties for Biomedical Applications.

A fine control over different dimensional scales is a challenging target for material science since it could grant control over many properties of the final material. In this study, we developed a multivariable additive manufacturing process, direct ink write printing, to control different architectural features from the nano- to the millimeter scale during extrusion. Chitin-based gel fibers with a water content of around 1500% were obtained extruding a polymeric solution of chitin into a counter solvent, water, inducing instant solidification of the material. A certain degree of fibrillar alignment was achieved basing on the shear stress induced by the nozzle. In this study we took into account a single variable, the nozzle's internal diameter (NID). In fact, a positive correlation between NID, fibril alignment, and mechanical resistance was observed. A negative correlation with NID was observed with porosity, exposed surface, and lightly with water content. No correlation was observed with maximum elongation (~50%), and the scaffold's excellent biocompatibility, which appeared unaltered. Overall, a single variable allowed a customization of different material features, which could be further tuned, adding control over other aspects of the synthetic process. Moreover, this manufacturing could be potentially applied to any polymer.

Single-cell genotyping of phytoplankton from ocean water by gel-based cell manipulation.

A comprehensive understanding of phytoplankton diversity is valuable for assessing an environment of interest as phytoplankton are primary producers in various aquatic food webs. Microscopic analyses are useful for diversity assessment based on characteristic cell morphologies. However, phylogenetic classification based solely on morphology requires an extremely high level of expertise. The genetic approach is another option for evaluating phytoplankton diversity; however, it cannot reveal morphological information. To integrate these two approaches, an original technology was developed, that is referred to as microcavity array (MCA)/gel-based cell manipulation (GCM). The model experiments using monocultures of various phytoplankton indicated that the efficiencies of cell recovery and isolation of single-cell plankton were dependent on cell size and shape. Cells with widths larger than the cavity width showed high level of recovery and isolation efficiency. Subsequent whole-genome amplification (WGA) of isolated single-cell plankton provided a sufficient amount (≈30 µg) of WGA products for genetic analyses. Furthermore, it is showed that MCA/GCM could directly analyze phytoplankton in ocean water obtained from Suruga Bay, Japan, without any cumbersome pretreatment. These results indicate that MCA/GCM technology is a powerful tool for elucidating the phytoplankton diversity in marine environment.

Transcriptomic profiling of single circulating tumor cells provides insight into human metastatic gastric cancer.

Transcriptome analysis of circulating tumor cells (CTCs), which migrate into blood vessels from primary tumor tissues, at the single-cell level offers critical insights into the biology of metastasis and contributes to drug discovery. However, transcriptome analysis of single CTCs has only been reported for a limited number of cancer types, such as multiple myeloma, breast, hepatocellular, and prostate cancer. Herein, we report the transcriptome analysis of gastric cancer single-CTCs. We utilized an antigen-independent strategy for CTC isolation from metastatic gastric cancer patients involving a size-dependent recovery of CTCs and a single cell isolation technique. The transcriptomic profile of single-CTCs revealed that a majority of gastric CTCs had undergone epithelial-mesenchymal transition (EMT), and indicated the contribution of platelet adhesion toward EMT progression and acquisition of chemoresistance. Taken together, this study serves to employ CTC characterization to elucidate the mechanisms of chemoresistance and metastasis in gastric cancer.

Recent advances in research on biointerfaces: From cell surfaces to artificial interfaces.

Biointerfaces are regions where biomolecules, cells, and organic materials are exposed to environmental media or come in contact with other biomaterials, cells, and inorganic/organic materials. In this review article, six research topics on biointerfaces are described to show examples of state-of-art research approaches. First, biointerface design of nanoparticles for molecular detection is described. Functionalized gold nanoparticles can be used for sensitive detection of various target molecules, including chemical compounds and biomolecules, such as DNA, proteins, cells, and viruses. Second, the interaction between bacterial cell surfaces and material surfaces, including the introduction of advances in analytical methods and theoretical calculations, are explained as well as their applications to bioprocesses. Third, bioconjugation technologies for localizing functional proteins at biointerfaces are introduced, in particular, by focusing the potential of enzymes as a catalytic tool for designing different types of bioconjugates that function at biointerfaces. Forth topics is focusing on lipid-protein interaction in cell membranes as natural biointerfaces. Examples of membrane lipid engineering are introduced, and it is mentioned how their compositional profiles affect membrane protein functions. Fifth topic is the physical method for molecular delivery across the biointerface being developed currently, such as highly efficient nanoinjection, electroporation, and nanoneedle devices, in which the key is how to perforate the cell membrane. Final topic is the chemical design of lipid- or polymer-based RNA delivery carriers and their behavior on the cell interface, which are currently attracting attention as RNA vaccine technologies targeting COVID-19. Finally, future directions of biointerface studies are presented.

Effects of fatty acid synthase-inhibitors on polyunsaturated fatty acid production in marine diatom Fistulifera solaris JPCC DA0580.

Omega-3 polyunsaturated fatty acids (PUFAs) such as eicosapentaenoic acid (EPA, C20:5ω-3) are essential for human health and fish growth especially in aquaculture sector. However, with the growing of aquaculture, the demand of PUFA supply also has been increasing. Fistulifera solaris, a marine diatom, is known for its ability to accumulate 65% of lipid content per dry cell weight, and can produce the high content of EPA. Thus, this diatom shows a great potential to be a feedstock of omega-3 PUFAs for fish feeds. In this study, in order to further understand and enhance the metabolism of PUFA biosynthesis in the diatom, the impacts of ketoacyl-ACP synthase (KAS) and ketoacyl-CoA synthase (KCS) inhibition on the PUFA production were analyzed by adding the specific inhibitors. KAS and KCS enzymes both play a role in the fatty acid elongation. As a result, the inhibition of KAS showed an increase in EPA content without arresting the cell growth. On the other hand, inhibition of KCS did not show a significant impact on the PUFA content in F. solaris. Our finding suggests that the specific suppression of KAS function can be a promising way to enhance the omega-3 PUFA production in F. solaris.

Signaling probe design for amplification-free detection of bacterial genes using DNA microarray.

DNA microarrays are useful to detect microorganisms for various purposes including clinical testing and food safety. However, conventional DNA microarrays need complicated operations such as amplification, fluorescence labeling, and washing steps. To address this issue, we previously developed the signaling probe-based DNA microarray system that can eliminate these steps, and demonstrated a direct detection of bacterial genes. Nonetheless, this system requires well-designed probe sets due to the fluorescence resonance energy transfer (FRET)-based mode of action. Up to date, the probe design was highly dependent on the trial-and-error processes. In this study, we propose a strategy to rationally design the sequences of signaling probes based on the thermodynamic analysis. This analysis aided to improve the probe performance approximately 2.8 times, without experiments, by suppressing the secondary structure formation of the probes. We successfully demonstrated the specific and amplification-free detection of 5S rRNA from total RNA extracted from Escherichia coli within 30 min.

Lensless imaging-based discrimination between tumour cells and blood cells towards circulating tumour cell cultivation.

Circulating tumour cells (CTCs) are recognized as important markers for cancer research. Nonetheless, the extreme rarity of CTCs in blood samples limits their availability for multiple characterization. The cultivation of CTCs is still technically challenging due to the lack of information of CTC proliferation, and it is difficult for conventional microscopy to monitor CTC cultivation owing to low throughput. In addition, for precise monitoring, CTCs need to be distinguished from the blood cells which co-exist with CTCs. Lensless imaging is an emerging technique to visualize micro-objects over a wide field of view, and has been applied for various cytometry analyses including blood tests. However, discrimination between tumour cells and blood cells was not well studied. In this study, we evaluated the potential of the lensless imaging system as a tool for monitoring CTC cultivation. Cell division of model tumour cells was examined using the lensless imaging system composed of a simple setup. Subsequently, we confirmed that tumour cells, JM cells (model lymphocytes), and erythrocytes exhibited cell line-specific patterns on the lensless images. After several discriminative parameters were extracted, discrimination between the tumour cells and other blood cells was demonstrated based on linear discriminant analysis. We also combined the highly efficient CTC recovery device, termed microcavity array, with the lensless-imaging to demonstrate recovery, monitoring and discrimination of the tumour cells spiked into whole blood samples. This study indicates that lensless imaging can be a powerful tool to investigate CTC proliferation and cultivation.

Assessment on the oil accumulation by knockdown of triacylglycerol lipase in the oleaginous diatom Fistulifera solaris.

Microalgae are promising producers of biofuel due to higher accumulation of triacylglycerol (TAG). However, further improvement of the lipid metabolism is critical for feasible application of microalgae in industrial production of biofuel. Suppression of lipid degradation pathways is a promising way to remarkably increase the lipid production in model diatoms. In this study, we established an antisense-based knockdown (KD) technique in the marine oleaginous diatom, Fistulifera solaris. This species has a capability to accumulate high content of lipids. Tgl1 KD showed positive impact on cell growth and lipid accumulation in conventional culture in f/2 medium, resulting in higher oil contents compared to wild type strain. However, these impacts of Tgl1 KD were slight when the cells were subjected to the two-stage growth system. The Tgl1 KD resulted in slight change of fatty acid composition; increasing in C14:0, C16:0 and C16:1, and decreasing in C20:5. This study indicates that, although Tgl1 played a certain role in lipid degradation in F. solaris, suppression of only a single type of TAG lipase was not significantly effective to improve the lipid production. Comprehensive understanding of the lipid catabolism in this microalga is essential to further improve the lipid production.

Amplification-free detection of bacterial genes using a signaling probe-based DNA microarray.

In this study, we developed a novel DNA microarray system that does not require fluorophore-labeling, amplification, or washing of the target nucleic acid fragments. Two types of DNA probes (so-called "signaling probes") labeled with a fluorescence dye (Cy3) and quencher molecule (BHQ2) were spotted on the DNA microarray such that fluorescent signals of Cy3 could be quenched by BHQ2 due to duplex formation between the probes. The addition of the target DNA or RNA fragments disrupted the duplex formed by the probes, resulting in the generation of fluorescence signals. We examined the assay conditions of the signaling probe-based DNA microarray, including the design of the probes, hybridization temperatures, and methods for fragmentation of target molecules. Since this approach does not require time-consuming processes, including labeling, amplification, and washing, the assay achieved specific detection of 16S rDNA and 16S rRNA extracted from Escherichia coli within 60 min, which was significantly rapid compared to conventional PCR-dependent DNA microarrays.

Algal biomass production by phosphorus recovery and recycling from wastewater using amorphous calcium silicate hydrates.

The phosphorous supply crisis is a major challenge for a sustainable society, and the algal industry is not unrelated to this crisis. Recycling phosphorus from sewage wastewater is a potential way to address this issue. We previously developed amorphous calcium silicate hydrates (aCSH) as excellent phosphorus recovery materials. In this study, we designed a phosphorus recovery process using aCSH in a pilot-scale facility connected to a sewage wastewater treatment plant, and demonstrated the production of microalgal biomass using phosphorous-containing aCSH (P_aCSH). As a result, high phosphorous recovery rates (>80%) were obtained throughout the year. The carbohydrate-rich microalga Pseudoneochloris sp. NKY372003 was cultivable with P_aCSH. The biomass and carbohydrate productivity of this microalga with P_aCSH was comparable to that with conventional media. Approximately 94% of the phosphorus in P_aCSH was recycled into the biomass. This study successfully demonstrated the recycling the phosphorus recovered from wastewater for microalgal cultivation by aCSH.

Magnetosome membrane engineering to improve G protein-coupled receptor activities in the magnetosome display system.

Magnetotactic bacterium, Magnetospirillum magneticum, produces biogenic magnetic nanoparticles termed magnetosomes, which are primarily composed of a magnetite core and a surrounding lipid bilayer membrane. We have fabricated human transmembrane protein-magnetosome complexes by genetic engineering with embedding the transmembrane proteins of interest, in particular G protein-coupled receptors (GPCRs), in the magnetosome membrane. The magnetosomes provide a promising platform for high throughput ligand screening towards drug discovery, and this is a critical advantage of the magnetosome display system beyond conventional membrane platforms such as liposomes and lipid nano-discs. However, the human GPCRs expressed on the magnetosomes were not fully functionalized in bacterial membranes the most probably due to the lack of essential phospholipids such as phosphatidylcholine (PC) for GPCR functionalization. To overcome this issue, we expressed two types of PC-producing enzymes, phosphatidylcholine synthase (PCS) and phosphatidylethanolamine N-methyltransferase (PMT) in M. magneticum. As a result, generation and incorporation of PC in cell- and magnetosome-membranes were demonstrated. To the best of our knowledge, M. magneticum is the second bacterial species which had the PC-incorporated lipid membrane by genetic engineering. Subsequently, a GPCR, thyroid-stimulating hormone receptor (TSHR) and PCS were simultaneously expressed. We found that PC in the magnetosome membrane assisted the binding of TSHR and its ligand, indicating that the genetic approach demonstrated in this study is useful to enhance the function of the GPCRs displayed on the magnetosomes.

Engineered chlorophyll catabolism conferring predator resistance for microalgal biomass production.

Production of valuable compounds including biofuels and pharmaceutical precursors derived from microalgae has garnered significant interest. Stable production of algal biomass is essential to make the microalgal industry commercially feasible. However, one of the largest issues is severe biological contamination by predators grazing the algal biomass, resulting in the crash of outdoor cultures. In the present study, we propose a novel engineering strategy for microalgae to cope with predators. The overexpression of plant chlorophyllase (CLH) in a microalga resulted in the enhancement of resistance to the predator. This result supported our hypothesis that CLH promotes chlorophyll breakdown in the chloroplasts of the microalgae when they are digested by the predator, generating the phototoxic catabolite chlorophyllide that damages the predator. To the best of our knowledge, this is the first study to establish predator-resistant microalgae by enhancing the CLH activity.

Prostaglandin production by the microalga with heterologous expression of cyclooxygenase.

Prostaglandins (PGs) are the physiologically active compounds synthesized from C20 polyunsaturated fatty acids (PUFAs) by cyclooxygenase (COX) and a series of PG synthases, and are utilized as pharmaceuticals. Currently, commercialized PGs are mainly produced by chemical synthesis under harsh conditions. By contrast, bioproduction of PGs can be an alternative, environmental-friendly, and inexpensive process with genetic engineering of model plants, although these conventional host organisms contain a limited quantity of PG precursors. In this study, we established an efficient PG production process using the genetically engineered microalga Fistulifera solaris which is rich in C20 PUFAs. A cox gene derived from the red alga Agarophyton vermiculophyllum was introduced into F. solaris. As a result, a transformant clone with high cox expression produced PGs (i.e., PGD2 , PGE2 , PGF2α , and 15-ketoPGF2α derived from arachidonic acid, and PGD3 , PGE3 , and PGF3α derived from eicosapentaenoic acid) as revealed by liquid chromatography/mass spectrometry. The total content of PGs was 1290.4 ng/g of dry cell weight, which was higher than that produced in the transgenic plant reported previously. The results obtained in this study indicate that the C20 PUFA-rich microalga functionally expressing COX is a promising host for PG bioproduction.

Performance evaluation of a high-throughput separation system for circulating tumor cells based on microcavity array.

Circulating tumor cells (CTCs) are widely known as useful biomarkers in the liquid biopsies of cancer patients. Although single-cell genetic analysis of CTCs is a promising diagnostic tool that can provide detailed clinical information for precision medicine, the capacity of single-CTC isolation for genetic analysis requires improvement. To overcome this problem, we previously developed a multiple single-cell encapsulation system for CTCs using hydrogel-encapsulation, which allowed for the high-throughput isolation of single CTCs. However, isolation of a single cell from adjacent cells remained difficult and often resulted in contamination by neighboring cells due to the limited resolution of the generated hydrogel. We developed a novel multiple single-cell encapsulation system equipped with a high magnification lens for high throughput and a more accurate single-cell encapsulation. The multiple single-cell encapsulation system has sufficient sensitivity to detect immune-stained CTCs, and could also generate a micro-scaled hydrogel that can isolate a single cell from adjacent cells within 10 µm, with high efficiency. The proposed system enables high throughput and accurate single-cell manipulation and genome amplification without contamination from neighboring cells.